We don't need to worry about the black rect optimization here (that
always assumes that there will be a black background) because the
background is culled based on the render list. That means if a black rect
is removed, the visibility will reach all the way to the bottom forcing
the renderer to clear the area not breaking the assumption.
If culling is not enabled, there is no longer any guarantee that the
elements behind the rect won't be rendered. We must render the black rect
in all circumstances to cover up anything rendered.
This fixes the WLR_SCENE_DISABLE_VISIBILTY option.
If the client binds to version 3 of zxdg_output_v1 and version 1 of
wl_output no wl_output.done or zxdg_output_v1.done event is
emitted [1].
Also no wl_output.done event is emitted when version 2 or lower of
zxdg_output_v1 is bound to.
Add a version check to output_manager_handle_get_xdg_output so that no
wl_output.done event is emitted when using version 1 of wl_output and
version 2 or lower of zxdg_output_v1.
[1]: https://gitlab.freedesktop.org/wayland/wayland-protocols/-/issues/81
This has a few benefits one of them crucial for proper operation:
- The primary output will be based on the largest area that is actually
visible to the user. Presentation and frame done events are based on
this state. This is important to do since we cull frame done events.
If we happen to be in a situation where a surface sits mostly on output
A and some on output B but is completely obstructed by for instance a
fullscreen surface on output A we will erroneously send frame_done
events based on output A. If we base things as they are in reality
(visibility) the primary output will instead be output B and things will
work properly.
- The primary output will be NULL if the surface is completely hidden.
Due to quirks with wayland, on a surface commit, frame done events are
required to be sent. Therefore, a new frame will be submitted for rendering
on the primary output. We can improve adaptive sync on completely hidden
but enabled surfaces if we null out the primary output in this state.
- The client will be more likely to choose better metadata to use
for rendering to an output's optimal rendering characteristics.
We can also get rid of the intersection checks in the rendering functions
because we are guaranteed to already be in the node do to the prior
intersection checking of the node visibility.
Simplify damage handling by using our cached visibility state.
Damaging can happen in one step because since we can use the old visibility
state which represent what portions of the screen the scene node was. This
way we can damage everything in one step after the fact.
Will query the scene for all nodes that appear in the given wlr_box.
The nodes will be sent to the iterator from closest to farthest from the
eye.
Refactor wlr_scene_node_at to use this new function.
This lets the renderer handle the wlr_buffer directly, just like it
does in texture_from_buffer. This also allows the renderer to batch
the rectangle updates, and update more than the damage region if
desirable (e.g. too many rects), so can be more efficient.
Only the exclusion zone for mapped layer shell surfaces should be respected. In
particular, a layer shell surface that was mapped with an exclusion zone but is
now unmapped should not adjust the usable area.
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3471
This allows whatever the user calls from the signal handlers to react to observe
the new state rather than the old, e.g. that a surface is no longer mapped in
the unmap handler.
This results in the following warning, which in release mode causes an
error due to -Werror:
../types/seat/wlr_seat_pointer.c: In function ‘wlr_seat_pointer_send_axis’:
../types/seat/wlr_seat_pointer.c:344:25: error: ‘low_res_value_discrete’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
343 | if (version < WL_POINTER_AXIS_VALUE120_SINCE_VERSION &&
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
344 | value_discrete != 0 && low_res_value_discrete == 0) {
| ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
This commit fixes:
- sending discrete scrolling events to multiple pointer resources
- sending events to clients which don't support wl_pointer.axis_discrete
When the client doesn't support high-resolution scroll, accumulate
deltas until we can notify a discrete event.
Some mice have a free spinning wheel, making possible to lock the wheel
when the accumulator value is not 0. To avoid synchronization issues
between the mouse wheel and the accumulators, store the last delta and
when the scroll direction changes, reset the accumulator.
Upgrade the seat protocol to version 8 and handle clients that support
high-resolution scroll wheel events.
Since the backend already sends discrete values in the 120 range,
forwarding them is enough.
Currently, the "wlr_event_pointer_axis" event stores low-resolution
values in its "delta_discrete" field. Low-resolution values are always
multiples of one, i.e., 1 for one wheel detent, 2 for two wheel
detents, etc.
In order to simplify internal handling of events, always transform in
the backend from the low-resolution value into the high-resolution
value.
The transformation is performed by multiplying by 120. The 120 magic
number is used by the kernel and it is exposed to clients in the
"WLR_POINTER_AXIS_DISCRETE_STEP" constant.
When using direct scanout back_buffer is NULL. We'd emit a commit
event with WLR_OUTPUT_STATE_BUFFER set but with a NULL buffer field,
which is non-sensical.
wl_subsurface description states:
A sub-surface becomes mapped, when a non-NULL wl_buffer is applied and
the parent surface is mapped.
Note that this doesn't require an explicit commit, which means that a
newly created subsurface with a mapped parent and a buffer already
attached must be mapped immediately. This can happen with the following
sequence of events:
- subcompositor.get_subsurface(subsurface, surface, parent)
- surface.attach(buffer)
- surface.commit()
- subsurface.destroy()
- subcompositor.get_subsurface(subsurface, surface, parent)
Fixes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3449
The previous wlr_output_cursor_set_image() allows setting a NULL buffer for the
cursor to hide it. This functionality was used by sway to hide the cursor,
restore the original semantics by allowing NULL buffers again by avoiding the
wlr_buffer allocation in case we have NULL pixels and handing a NULL wlr_buffer
to wlr_output_cursor_set_buffer().
Whether a texture is opaque or not doesn't depend on the renderer
at all, it just depends on the source buffer. Instead of forcing
all renderers to implement wlr_texture_impl.is_opaque, let's move
this in common code and use the wlr_buffer format to know whether
a texture will be opaque.
...in wlr_scene_layer_surface_v1_configure()
Reproduce bug with waybar by setting `"margin": 5,`
in ~/.config/waybar/config. It will result in the right edge of the panel
extending outside the edge of the output.
The bug can also be reproduced with gtk-layer-demo by anchoring
left/right/top/bottom and setting respective margins
Relates-to: https://github.com/labwc/labwc/issues/382
Before calling wlr_output_impl.{test,commit}, perform a cheap
comparison between the current and candidate state. Unset any
fields which didn't change.
This refactors output_ensure_buffer() to not mutate the state passed,
making the previous subtle behavior much more explicit.
Fixes: d483dd2f ("output: add wlr_output_commit_state")
Closes: #3442
Replace them with wlr_signal_emit_safe, which correctly handles
cases where a listener removes another listener.
Reported-by: Isaac Freund <ifreund@ifreund.xyz>
See the discussion at [1]: there's no easy way to fix libwayland-cursor
without a new API. Sending the error for other roles will prevent the
same client bug from appearing elsewhere.
[1]: https://gitlab.freedesktop.org/wayland/wayland/-/issues/194
This commit ensures that outputs that weren't created by the output
layout helper aren't destroyed on the output layout change.
Consider the following piece of logic:
// struct wlr_output *o1, *o2;
// struct wlr_scene *scene;
// struct wlr_output_layout *layout;
wlr_scene_attach_output_layout(scene, layout);
wlr_output_layout_add_auto(layout, o1);
struct wlr_scene_output *so2 = wlr_scene_output_create(scene, o2);
wlr_output_layout_move(layout, o1, 100, 200);
// so2 is invalid now
Since 5e0ef70cc0 ("seat: Create inert objects for missing capabilities")
wlroots can create inert seat objects when the capability is currently missing
for the client but it had the capablity before. The client hoever will happily
handover the wl_pointer resource to the relative_pointer implementation,
creating a NULL pointer dereference when trying to access the seat_client which
is set to NULL for inert objects.
Since the protocol does not contain an error for such requests, we hand out an
relative_pointer handle with the seat set to NULL.
We also need to check whether there is an associated seat in
send_relative_motion and need to tweak the destroy notifier in case no seat is
available.
This way we can hand out a valid relative_pointer resource and don't crash the
compositor when trying to access an inert seat pointer resource in
relative_pointer.
Relevant WAYLAND_DEBUG=1 when testing a client and switching VT every second:
[2619872.442] wl_seat@30.capabilities(3)
[2619872.460] -> wl_seat@30.get_pointer(new id wl_pointer@36)
[2619872.484] wl_data_device@25.selection(nil)
[2619872.504] zwp_primary_selection_device_v1@26.selection(nil)
[2619874.995] wl_seat@12.capabilities(3)
[2619875.035] -> wl_compositor@5.create_surface(new id wl_surface@37)
[2619875.088] -> wl_seat@12.get_pointer(new id wl_pointer@29)
[2619875.105] -> zwp_relative_pointer_manager_v1@8.get_relative_pointer(new id zwp_relative_pointer_v1@27, wl_pointer@29)
[2619875.127] -> wl_compositor@5.create_surface(new id wl_surface@35)
[2619875.139] -> wl_seat@12.get_pointer(new id wl_pointer@43)
[2619981.180] wl_seat@12.capabilities(2)
[2619981.214] -> zwp_relative_pointer_v1@27.destroy()
[2619981.226] -> wl_pointer@29.release()
[2619981.236] -> wl_surface@37.destroy()
[2619981.247] -> wl_pointer@43.release()
[2619981.254] -> wl_surface@35.destroy()
[2619981.262] wl_seat@12.capabilities(0)
[2619981.285] -> wl_keyboard@33.release()
[2619987.316] wl_seat@30.capabilities(2)
[2619987.336] -> wl_pointer@36.release()
[2619987.363] wl_seat@30.capabilities(0)
[2619987.371] -> wl_keyboard@34.release()
[2621932.880] wl_display@1.delete_id(41)
[2621932.903] wl_display@1.delete_id(40)
[2621932.910] wl_display@1.delete_id(27)
[2621932.917] wl_display@1.delete_id(29)
[2621932.924] wl_display@1.delete_id(37)
[2621932.930] wl_display@1.delete_id(43)
[2621932.944] wl_display@1.delete_id(35)
[2621932.950] wl_display@1.delete_id(33)
[2621932.959] wl_seat@12.capabilities(2)
[2621932.976] -> wl_seat@12.get_keyboard(new id wl_keyboard@33)
[2621936.875] wl_seat@12.capabilities(3)
[2621936.893] -> wl_compositor@5.create_surface(new id wl_surface@35)
[2621936.931] -> wl_seat@12.get_pointer(new id wl_pointer@43)
[2621936.945] -> zwp_relative_pointer_manager_v1@8.get_relative_pointer(new id zwp_relative_pointer_v1@37, wl_pointer@43)
[2621936.965] -> wl_compositor@5.create_surface(new id wl_surface@29)
[2621936.987] -> wl_seat@12.get_pointer(new id wl_pointer@27)
[2621942.796] wl_data_device@25.selection(nil)
[2621942.817] zwp_primary_selection_device_v1@26.selection(nil)
[2621942.823] wl_seat@30.capabilities(2)
[1] has changed wlr_drm_format to remove the assumption that
MOD_INVALID is always implicitly enabled. MOD_INVALID is now part
of the modifier list just like any other modifier.
The patch adding support for linux-dmabuf-v1 feedback has been
written a lot of time before [1], and hasn't been updated accordingly
when merged. This results in MOD_INVALID being advertised twice [2] and
other index bugs.
Fix these issues by removing special-casing for MOD_INVALID.
[1]: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/3231
[2]: https://github.com/swaywm/sway/issues/7028
This allows the make/model/serial to be NULL when unset, and allows
them to be longer than the hardcoded array length.
This is a breaking change: compositors need to handle the new NULL
case, and we stop setting make/model to useless "headless" or
"wayland" strings.
This will display red translucent rectangles on the screen regions that
have been damaged. These rectangles will fade out over the span of 250
msecs. If the area is damaged again while the region is fading out,
the timer is reset.
Let's also disable direct scan out when this option is enabled, or else
we won't be able to render the highlight damage regions.
After cancelation we destroy the touch points associated with this
surface as the Wayland spec says:
No further events are sent to the clients from that particular gesture.
Touch cancellation applies to all touch points currently active on this
client's surface. The client is responsible for finalizing the touch
points, future touch points on this surface may re-use the touch point
ID.
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/2999
This function sidesteps damage tracking and output awareness on
buffers/surfaces. This function isn't a great fit for the API.
Let's also inline the function and simplify it.
There were a couple places this was missing
- on mode change of an output. If the resolution changes for example
nodes may fall out of the view.
- on commits on an output for scale or transform changes
- when the transform of a buffer is changed. If the dest size is not
set, the buffer may have been rotated potentially changing its size
if the buffer width != height
With protocol additions such as [1], compositors currently have no
way to opt out of the version upgrade. The protocol upgrade will
always be backwards-compatible but may require new compositor
features.
The status quo doesn't make it possible to ship a protocol addition
without breaking the wlroots API. This will be an issue for API
stabilization [2].
To address this, let compositors provide a maximum version in the
function creating the global. We need to support all previous versions
of the interface anyways because of older clients.
This mechanism works the same way as Wayland clients passing a version
in wl_global.bind.
[1]: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/3514
[2]: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/1008
References: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3397
There were three places initializing a token:
- wlr_xdg_activation_v1_add_token
- wlr_xdg_activation_token_v1_create
- activation_handle_get_activation_token
The initialization of the token.destroy was missing in the first one. To
prevent these functions from getting out of sync move the token creation
into a common function.
Fixes 4c59f7d4 ("xdg-activation: Allow to submit tokens")
This commit fixes a regression introduced in
511f137f8f where GTK tooltips wouldn't be
unconstrained due to no gravity on x axis being set, in which case the
behavior is ambiguous, by sliding to the right/bottom.
This fixed adaptive sync issues with wlr_scene. Scenes don't check
if the damage region intersects with an output when calling
wlr_output_damage_add.
This is especially important for multi output.
The destroy callback in wlr_touch_impl has been removed. The function
`wlr_touch_finish` has been introduced to clean up the resources owned by a
wlr_touch.
`wlr_input_device_destroy` no longer destroys the wlr_touch, attempting to
destroy a wlr_touch will result in a no-op.
The field `name` has been added to the wlr_touch_impl to be able to identify
a given wlr_touch device.
The destroy callback in wlr_tablet_tool_impl has been removed. The function
`wlr_tablet_tool_finish` has been introduced to clean up the resources owned by
a wlr_tablet_tool.
`wlr_input_device_destroy` no longer destroys the wlr_tablet_tool, attempting to
destroy a wlr_tablet_tool will result in a no-op.
The field `name` has been added to the wlr_tablet_tool_impl to be able to
identify a given wlr_tablet_tool device.
The destroy callback in wlr_tablet_pad_impl has been removed. The function
`wlr_tablet_pad_finish` has been introduced to clean up the resources owned by a
wlr_tablet_pad.
`wlr_input_device_destroy` no longer destroys the wlr_tablet_pad, attempting to
destroy a wlr_tablet_pad will result in a no-op.
The field `name` has been added to the wlr_tablet_pad_impl to be able to identify
a given wlr_tablet_pad device.
The destroy callback in wlr_switch_impl has been removed. The function
`wlr_switch_finish` has been introduced to clean up the resources owned by a
wlr_switch.
`wlr_input_device_destroy` no longer destroys the wlr_switch, attempting to
destroy a wlr_switch will result in a no-op.
The field `name` has been added to the wlr_switch_impl to be able to identify
a given wlr_switch device.
The destroy callback in wlr_pointer_impl has been removed. The function
`wlr_pointer_finish` has been introduced to clean up the resources owned by a
wlr_pointer.
`wlr_input_device_destroy` no longer destroys the wlr_pointer, attempting to
destroy a wlr_pointer will result in a no-op.
The field `name` has been added to the wlr_pointer_impl to be able to identify
a given wlr_pointer device.
The destroy member in wlr_keyboard_impl has been removed. The function
`wlr_keyboard_finish` has been introduce to clean up the resources owned by a
wlr_keyboard.
`wlr_input_device_destroy` no longer destroys the wlr_keyboard, attempting to
destroy a wlr_keyboard will result in a no-op.
The field `name` has been added to the wlr_keyboard_impl to be able to identify
a given wlr_keyboard device.
To be consistent with other wlr_xdg_* structs,
wlr_xdg_positioner_resource is renamed to wlr_xdg_positioner and made
public, and wlr_xdg_positioner is renamed to wlr_xdg_positioner_rules.
Functions which operated on wlr_xdg_positioner were renamed and updated
accordingly.
In case the `wlr_input_device` is not owned by a specialized input device, the
function will finish the wlr_input_device and call it's implementation destroy
function if an implementation has been supplied, or simply free it.
When calling wlr_output_test an empty buffer might be created. This implicitly
changes the pending state of the output. Ensure that such a change is only
temporarily and clear such an empty buffer before returning the test result.
I am running a custom compiled version of chromium with a patch to get
it up and running on sway git at the moment, and in that development
build I compiled there is a bug where the browser will crash if you
try to open a file select dialog. When this crash happens, chromium will
not close, but instead will remain open and impossible to close unless
you send a SIGKILL signal to the process. However, sway will crash to
tty when you send the SIGKILL.
I have a hunch that when chromium is opening the file select dialog
it is creating some sort of a xdg toplevel surface. But it freezes
before it fully initializes the surface. When the SIGKILL signal is
given, sway/wlroots will try to free the xdg_toplevel surface but
because it hasn't fully initialized due to the frozen window, it
segfaults.
Don't be fooled by the assert, the assert is not firing, the surface
pointer is indeed NULL here.
* thread #1, name = 'sway', stop reason = signal SIGSEGV: invalid address (fault address: 0x28)
frame #0: 0x00007ffff78b9041 libwlroots.so.11`wlr_xdg_toplevel_set_parent(surface=0x0000000000000000, parent=0x0000000000000000) at wlr_xdg_toplevel.c:159:37
156
157 void wlr_xdg_toplevel_set_parent(struct wlr_xdg_surface *surface,
158 struct wlr_xdg_surface *parent) {
-> 159 assert(surface->role == WLR_XDG_SURFACE_ROLE_TOPLEVEL);
160 assert(!parent || parent->role == WLR_XDG_SURFACE_ROLE_TOPLEVEL);
161
162 if (surface->toplevel->parent) {
(lldb) up
error: sway {0x0003442a}: DIE has DW_AT_ranges(DW_FORM_sec_offset 0x67) attribute, but range extraction failed (invalid range list offset 0x67), please file a bug and attach the file at the start of this error message
error: sway {0x0003442a}: DIE has DW_AT_ranges(DW_FORM_sec_offset 0x67) attribute, but range extraction failed (invalid range list offset 0x67), please file a bug and attach the file at the start of this error message
frame #1: 0x00007ffff78e176e libwlroots.so.11`destroy_imported(imported=0x000055555626d570) at wlr_xdg_foreign_v1.c:154:3
151 wl_list_for_each_safe(child, child_tmp, &imported->children, link) {
152 struct wlr_xdg_surface *xdg_child =
153 wlr_xdg_surface_from_wlr_surface(child->surface);
-> 154 wlr_xdg_toplevel_set_parent(xdg_child, NULL);
155 }
156
157 wl_list_remove(&imported->exported_destroyed.link);
(lldb) up
frame #2: 0x00007ffff78e1b9d libwlroots.so.11`xdg_imported_handle_resource_destroy(resource=0x00005555562555a0) at wlr_xdg_foreign_v1.c:280:2
277 struct wl_resource *resource) {
278 struct wlr_xdg_imported_v1 *imported = xdg_imported_from_resource(resource);
279 if (!imported) {
-> 280 return;
281 }
282
283 destroy_imported(imported);
(lldb) up
frame #3: 0x00007ffff794989a libwayland-server.so.0`___lldb_unnamed_symbol211 + 154
libwayland-server.so.0`___lldb_unnamed_symbol211:
-> 0x7ffff794989a <+154>: andl $0x1, %r13d
0x7ffff794989e <+158>: je 0x7ffff79498b0 ; <+176>
0x7ffff79498a0 <+160>: addq $0x8, %rsp
0x7ffff79498a4 <+164>: movl $0x1, %eax
(lldb) up
frame #4: 0x00007ffff794fec0 libwayland-server.so.0`___lldb_unnamed_symbol290 + 64
libwayland-server.so.0`___lldb_unnamed_symbol290:
-> 0x7ffff794fec0 <+64>: cmpl $0x1, %eax
0x7ffff794fec3 <+67>: jne 0x7ffff794fed3 ; <+83>
0x7ffff794fec5 <+69>: addq $0x8, %rbx
0x7ffff794fec9 <+73>: cmpq %rbx, %r13
(lldb) up
frame #5: 0x00007ffff79503e0 libwayland-server.so.0`___lldb_unnamed_symbol300 + 32
libwayland-server.so.0`___lldb_unnamed_symbol300:
-> 0x7ffff79503e0 <+32>: cmpl $0x1, %eax
0x7ffff79503e3 <+35>: je 0x7ffff79503f0 ; <+48>
0x7ffff79503e5 <+37>: popq %rbx
0x7ffff79503e6 <+38>: popq %r12
(lldb) up
frame #6: 0x00007ffff794a30e libwayland-server.so.0`wl_client_destroy + 126
libwayland-server.so.0`wl_client_destroy:
-> 0x7ffff794a30e <+126>: movq %r12, %rdi
0x7ffff794a311 <+129>: callq 0x7ffff7950150 ; ___lldb_unnamed_symbol293
0x7ffff794a317 <+135>: movq 0x8(%rbp), %rdi
0x7ffff794a31b <+139>: callq *0xdc77(%rip)
(lldb) up
frame #7: 0x00007ffff794a3f7 libwayland-server.so.0`___lldb_unnamed_symbol214 + 119
libwayland-server.so.0`___lldb_unnamed_symbol214:
-> 0x7ffff794a3f7 <+119>: movq 0x28(%rsp), %rax
0x7ffff794a3fc <+124>: subq %fs:0x28, %rax
0x7ffff794a405 <+133>: jne 0x7ffff794a727 ; <+935>
0x7ffff794a40b <+139>: addq $0x38, %rsp
(lldb) up
frame #8: 0x00007ffff794d1ca libwayland-server.so.0`wl_event_loop_dispatch + 202
libwayland-server.so.0`wl_event_loop_dispatch:
-> 0x7ffff794d1ca <+202>: addq $0xc, %r15
0x7ffff794d1ce <+206>: cmpq %r15, %rbp
0x7ffff794d1d1 <+209>: jne 0x7ffff794d1b8 ; <+184>
0x7ffff794d1d3 <+211>: movq 0x8(%rsp), %rcx
(lldb) up
frame #9: 0x00007ffff794ad37 libwayland-server.so.0`wl_display_run + 39
libwayland-server.so.0`wl_display_run:
-> 0x7ffff794ad37 <+39>: movl 0x8(%rbx), %eax
0x7ffff794ad3a <+42>: testl %eax, %eax
0x7ffff794ad3c <+44>: jne 0x7ffff794ad20 ; <+16>
0x7ffff794ad3e <+46>: popq %rbx
(lldb) up
frame #10: 0x000055555557689a sway`server_run(server=0x00005555555f26c0) at server.c:307:2
304 wlr_backend_destroy(server->backend);
305 return false;
306 }
-> 307
308 return true;
309 }
310
(lldb) up
frame #11: 0x0000555555575a93 sway`main(argc=3, argv=0x00007fffffffe978) at main.c:431:2
428 swaynag_show(&config->swaynag_config_errors);
429 }
430
-> 431 server_run(&server);
432
433 shutdown:
434 sway_log(SWAY_INFO, "Shutting down sway");
The wlroots APIs currently don't allow importing/uploading a buffer
during rendering operations. Scene-graph buffer nodes need to turn
their wlr_buffer into a wlr_texture at some point. It's not always
possible to do so at wlr_scene_buffer creation time because the
scene-graph may have zero outputs at this point, thus no way to
grab a wlr_renderer.
Instead, add scene-graph buffers to a pending list and try to import
them in wlr_scene_output_commit.
References: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3354
Commit 498f30aad1 changed the logic of
get_mapping() in types/wlr_cursor.c to use updated version of
wlr_output_layout_get_box(). However, the case where c_device isn't NULL
but doesn't have output or geometry mappings wasn't handled properly,
resulting in leaving the output value uninitialized. This commit fixes
`c_device != NULL` branch by returning from the function only when a
mapping is found.
Fixes https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3369
wl_subsurface::set_desync description states: "If cached state exists when
wl_surface.commit is called in desynchronized mode, the pending state is
added to the cached state, and applied as a whole."
This commit reintroduces an implementation of said behavior, previously
removed in 7daf6da9ac05be2cb74c0983e3caee0b21db75d4.
Strictly speaking, this logic isn't fully correct, as the cached state
and the pending state are applied individually instead, if the cached
state isn't locked by anything else. However, the end result is still
the same.
This commit fixes the issue with Firefox permission popups.
wp_viewporter protocol doesn't seem to say anything about damage, but
Firefox assumes that wp_viewport::set_source alone is enough to damage
the whole surface, and that assumption kinda makes sense, so let's do
that.
Currently the output enter event is never sent if the client has not
yet bound the output, which happens every time the compositor creates a
new output.
To fix this, listen for the output bind event and inform clients as
if needed.
This commit renames map/unmap listeners to clarify that they handle
subsurface events, and ensures the node is always destroyed before
the subsurface.
Without this patch, wl_list_remove() would operate on listener links in
already freed memory. glibc is usually lenient to bugs like this, but
musl isn't.
Allows the compositor to submit tokens to the pool of
currently active tokens. This can be useful when the
launcher doesn't use or support xdg-activation-v1 by
itself - e.g. when it is X11 based or use gtk_shell1.
This doesn't work if scene outputs are not used as the primary output of
scene surfaces will always be NULL.
Therefore, take a wlr_scene_output instead of separate wlr_scene and
wlr_output arguments and rename the function to
wlr_scene_output_send_frame_done().
The actual behavior of the function is unchanged.
This allows compositors to avoid sending multiple frame done events
to a surface that is rendered on multiple outputs at once. This may
also be used in the same way for presentation feedback.
wlroots picks names for all outputs, but it might be desirable for
compositor to override it.
For instance, Sway will use a headless output as a fallback in
case no outputs are connected. Sway wants to clearly label the
fallback output as such and label "real" headless outputs starting
from HEADLESS-1.
Implement a basic version of linux-dmabuf-unstable-v1 version 4.
Only default hints are implemented.
The new wlr_linux_dmabuf_feedback_v1 data structure will allow
compositors to define their own custom hints in the future. This
data structure makes it easy to describe feedback metadata.
It's converted to a "compiled" form suitable for marshalling over
the Wayland socket via feedback_compile.
This allows output commit listeners to access the newly committed
buffer. Currently wlr_output.front_buffer is used but it'll get
removed in the next commit.
DRM formats with an empty modifier list are invalid. Instead of
emptying the list, reduce it to { INVALID }.
Add a check to make sure the renderer and backend support implicit
modifiers, so that we don't fallback on e.g. Vulkan.
Closes: https://github.com/swaywm/sway/issues/6692
This allows getting a wlr_scene_output from a wlr_output. Since an
output can only be added once to a scene-graph there's no ambiguity.
This is useful for compositors using wlr_scene_attach_output_layout:
the output layout integration automatically creates a scene-graph
output for each wlr_output added to the layout.
This allows compositors to get primary formats without manually
calling wlr_output_impl.get_primary_formats.
For example, the Sway patch for linux-dmabuf feedback [1] needs
this.
[1]: https://github.com/swaywm/sway/pull/6313
Sometimes we were calling wlr_output_impl.set_cursor with a NULL
buffer, but we weren't clearing wlr_output.cursor_front_buffer.
Avoid leaving a dangling buffer behind.
Introduce a helper function output_set_hardware_cursor which calls
wlr_output_impl.set_cursor and keeps cursor_front_buffer in sync.
The implicit check to filter out LINEAR for dmabuf checked for INVALID
twice instead of checking for INVALID & LINEAR. Fix this.
Fixes: d37eb5c2ea ("linux-dmabuf-v1: filter out LINEAR if implicit")
Reported-by: Dawid Czeluśniak <czelusniakdawid@gmail.com>
If only INVALID and LINEAR are valid modifiers, we need to filter out
LINEAR since Xwayland won't be able to allocate a BO with the explicit
linear modifier on hardware that does not support explicit modifiers.
The addition of LINEAR is an internal implementation detail which
simplifies the wlroots architecture for now.
Evntually Xwayland should be fixed to filter out modifiers that are not
supported by the GBM implementation, see [1]. This could be done by
querying EGL for the supported modifiers.
[1]: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1166
This allows compositors to easily add an xdg_surface to the
scene-graph while retaining the ability to unconstraint popups
and decide their final position.
Compositors can handle new popups with the wlr_xdg_shell.new_surface
event, get the parent scene-graph node via wlr_xdg_popup.parent.data,
create a new scene-graph node via wlr_scene_xdg_surface_tree_create,
and unconstraint the popup if they want to.
The parameters are used when the client is in the process of
building a buffer. There's no reason why this internal
implementation detail should be exposed in our public header.
All graphics drivers supporting cursor planes support ARGB8888,
the default cursor format, so this fallback is almost certainly
unused.
Essentially all cursor themes use alpha transparency to make it
clearer where relative to the screen content the cursor hotspot is.
It is better to fall back to a slightly slower software cursor than
it is to fall back to the opaque square that is a hardware cursor
without an alpha channel.
This change introduces new double buffered state to the wlr_output,
corresponding to the buffer format to render to.
The format being rendered to does not control the bit depth of colors
being sent to the display; it does generally determine the format with
which screenshot data is provided. The DRM backend _may_ sent higher
bit depths if the render format depth is increased, but hardware and
other limitations may apply.
Most (and possibly all) compositors using wlroots only ever render
fully opaque content. To provide better performance, this change
switches the default format used by wlr_output buffers from
ARGB8888 to the opaque XRGB8888.
Compositors like mutter, kwin, and weston already default to
XRGB8888, so this change is unlikely to expose any new bugs in
underlying drivers and hardware.
This does not affect the hardware cursor's buffer format, which is
still ARGB8888 by default.
As part of this change, the X11 backend (which does not support
changing format at runtime) now picks a true color, 24 bit depth
visual (i.e. XRGB8888) instead of a 32 bit depth (ARGB8888) one.
This makes it possible for the two functions using output_pick_format
(output_pick_cursor_format and output_create_swapchain) to select
different buffer formats.
The backend and renderer don't directly interact together, so there's
no point in checking that their buffer caps intersect. What we want to
check is that:
- The backend and allocator buffer caps are compatible, because the
backend consumes buffers to display them.
- The renderer and allocator buffer caps are compatible, because the
renderer imports buffers to sample them or render to them.
For instance, when running with the DRM backend and the Pixman renderer,
the (backend & renderer) check will fail because backend = DMABUF and
renderer = DATA_PTR.
They are never used in practice, which makes all of our flag
handling effectively dead code. Also, APIs such as KMS don't
provide a good way to deal with the flags. Let's just fail the
DMA-BUF import when clients provide flags.
We were send a protocol error if INTERLACED or BOTTOM_FIRST was
set. This is incorrect for the zwp_linux_dmabuf_params.create
code-path because this kills the client without allowing it to
gracefully handle the error.
We should only send a protocol error if the client provides a bit
not listed in the protocol definition.
The protocol uses a signed integer here, which is also what the
wlr_input_method_v2_preedit_string struct provides to compositors from
the input method protocol. Sway currently just passes those int32_t
values directly to this function leading to an implicit conversion.
The data field is useful to track metadata about a token. The destroy
events are useful for compositors that track application startup to
let them know they can stop doing that.
These new functions allow a compositor to request new managed tokens
without participating in the xdg-activation procedure as a wayland
client.
This enables the compositor itself to behave as a launcher
application.
Variables on the stack are released when the parent block is closed.
Here, `now` is used outside of the `if` block, causing the following
crash when starting Sway with the headless backend:
==49606==ERROR: AddressSanitizer: stack-use-after-scope on address 0x7fff94645f90 at pc 0x5558aeae9e29 bp 0x7fff94645df0 sp 0x7fff94645de0
READ of size 16 at 0x7fff94645f90 thread T0
#0 0x5558aeae9e28 in handle_present ../sway/desktop/output.c:834
#1 0x7fdc8d6792fb in wlr_signal_emit_safe ../subprojects/wlroots/util/signal.c:29
#2 0x7fdc8d54f77f in wlr_output_send_present ../subprojects/wlroots/types/output/output.c:766
#3 0x7fdc8d524a28 in output_commit ../subprojects/wlroots/backend/headless/output.c:71
#4 0x7fdc8d54d2db in wlr_output_commit ../subprojects/wlroots/types/output/output.c:629
#5 0x5558aeb013cb in output_render ../sway/desktop/render.c:1157
#6 0x5558aeae549e in output_repaint_timer_handler ../sway/desktop/output.c:544
#7 0x5558aeae5f8a in damage_handle_frame ../sway/desktop/output.c:606
#8 0x7fdc8d6792fb in wlr_signal_emit_safe ../subprojects/wlroots/util/signal.c:29
#9 0x7fdc8d6007d5 in output_handle_frame ../subprojects/wlroots/types/wlr_output_damage.c:44
#10 0x7fdc8d6792fb in wlr_signal_emit_safe ../subprojects/wlroots/util/signal.c:29
#11 0x7fdc8d54ee84 in wlr_output_send_frame ../subprojects/wlroots/types/output/output.c:720
#12 0x7fdc8d54efc3 in schedule_frame_handle_idle_timer ../subprojects/wlroots/types/output/output.c:728
#13 0x7fdc8c9dcf5a in wl_event_loop_dispatch_idle (/usr/lib/libwayland-server.so.0+0xaf5a)
#14 0x7fdc8c9dcfb4 in wl_event_loop_dispatch (/usr/lib/libwayland-server.so.0+0xafb4)
#15 0x7fdc8c9dabc6 in wl_display_run (/usr/lib/libwayland-server.so.0+0x8bc6)
#16 0x5558aeac8e30 in server_run ../sway/server.c:285
#17 0x5558aeac3c7d in main ../sway/main.c:396
#18 0x7fdc8be35b24 in __libc_start_main (/usr/lib/libc.so.6+0x27b24)
#19 0x5558aea8686d in _start (/home/simon/src/sway/build/sway/sway+0x33f86d)
If the output is destroyed after capture_output but before
frame_handle_copy, it'll have a dangling output pointer. Add the
output destroy listener in capture_output.
Closes: https://github.com/swaywm/wlroots/issues/3284
This is only called from one function.
To destroy the wlr_scene_subsurface_tree from elsewhere, callers
can destroy the scene-graph node returned by
wlr_scene_subsurface_tree_create instead (just like a compositor
would do). subsurface_tree_handle_surface_destroy does exactly this.
Inlining avoids calling subsurface_tree_destroy by mistake.
This organizes the wlr_output implementation into separate files.
This avoids having a single mega-file with lots of unrelated parts
and makes it more obvious what the interactions between all the
parts are.
No functional changes, just moving code around.
Currently these functions remove the node from the scene if the sibling
argument is the same node as the node. To prevent confusion when
misusing this API, assert that the nodes are distinct and document this.
These functions are used mostly for rendering, where including unmapped
surfaces is undesired.
This is a breaking change. However, few to no usages will have to be
updated.
struct wlr_xdg_surface_state is introduced to hold the geometry
and configure serial to be applied on next wl_surface.commit.
This commit fixes our handling for ack_configure: instead of making
the request mutate our current state, it mutates the pending state
only.
Co-authored-by: Simon Ser <contact@emersion.fr>
As touchpad touches are generally fully abstracted, a client cannot
currently know when a user is interacting with the touchpad without
moving. This is solved by hold gestures.
Hold gestures are notifications about one or more fingers being held
down on the touchpad without significant movement.
Hold gestures are primarily designed for two interactions:
- Hold to interact: where a hold gesture is active for some time a
menu could pop up, some object could be selected, etc.
- Hold to cancel: where e.g. kinetic scrolling is currently active,
the start of a hold gesture can be used to stop the scroll.
Unlike swipe and pinch, hold gestures, by definition, do not have
movement, so there is no need for an "update" stage in the gesture.
Create two structs, wlr_event_pointer_hold_begin and
wlr_event_pointer_hold_end, to represent hold gesture events and the
signals to emit them: wlr_pointer->pointer.hold_begin/hold_end.
This allows the compiler to error out if we haven't enumerated all
of the cases. This is useful to avoid a missing implementation when
adding a new node type.
This commit removes any checks whether a configure will change anything
and makes configures be sent unconditionally. Additionally, configures
are scheduled on xdg_toplevel.{un,}set_{maximized,fullscreen} events.
Previously, `wlr_xdg_toplevel` didn't follow the usual "current state +
pending state" pattern and instead had confusingly named
`client_pending` and `server_pending`. This commit removes them, and
instead introduces `wlr_xdg_toplevel.scheduled` to store the properties
that are yet to be sent to a client, and `wlr_xdg_toplevel.requested`
to store the properties that a client has requested. They have different
types to emphasize that they aren't actual states.
This allows callers to specify the operations they'll perform on
the returned data pointer. The motivations for this are:
- The upcoming Linux MAP_NOSIGBUS flag may only be usable on
read-only mappings.
- gbm_bo_map with GBM_BO_TRANSFER_READ hurts performance.
This will allow more scene-graph extensions to be added without
cluttering wlr_scene.c, for instance for sub-surface handling and
wlr_output_layout integration.
When providing non-zero layout-local coordinates to
wlr_scene_render_output, the viewport should be translated by the
given values. However the viewport was translated by the opposite
values: when giving 42,42 the viewport's position would be set to
-42,-42.
On modeset wlr_output will internally allocate a buffer. The
backend will emit a "mode" output event, then wlr_output will
emit a "commit" event.
wlr_output_damage handles the "mode" event by damaging the whole
output, and then handles the "commit" event. However the commit
event has a buffer, so wlr_output_damage rotates the damage in its
ring buffer, thinking the compositor has rendered a frame. The
compositor hasn't rendered a frame, what wlr_output_damage sees is
the internal wlr_output black buffer used for the modeset.
Let's fix this by damaging the whole output in the "commit" event
handler if the mode has changed. Additionally, damage the whole
output after rotating the damage ring buffer.
Caching frame callback lists is actually the correct behavior, because
if a surface is locked because of e.g. subsurface synchronization,
clients would expect to receive frame done events only after the
pending state is actually committed.
With the addition of a non-surface node type, it was unclear how such
nodes should interact with scene_node_surface_at(). For example, if the
topmost node at the given point is a RECT, should the function treat
that node as transparent and continue searching, or as opaque and return
(probably) NULL?
Instead, replace the function with one returning a scene_node, which
will allow for more consistent behavior across different node types.
Compositors can downcast scene_surface nodes via the now-public
wlr_scene_surface_from_node() if they need access to the surface itself.
RECT is a solid-colored rectangle, useful for simple borders or other
decoration. This can be rendered directly using the wlr_renderer,
without needing to create a surface.
For consistency with the rest of the scene-graph API, prevent detaching
a subtree by giving NULL for the new parent, and don't allow ROOT nodes
to be grafted into another tree.
If nodes are arranged in a tree rather than at a single level, then it
makes sense that there should be a way to move them to a completely
different parent in addition to moving up or down among siblings.
This allows compositors to easily enable or disable a scene-graph node.
This can be used to show/hide a surface when the xdg_surface is
mapped/unmapped.
A new wlr_scene API has been added, following the design ideas from [1].
The new API contains the minimal set of features required to make the
API useful. The goal is to design a solid fundation and add more
features in the future.
[1]: https://github.com/swaywm/wlroots/issues/1826#issuecomment-564601757
If a subsurface is being placed below a subsurface right above it, this
should be a noop. However, `node` pointed to the subsurface that was
moved, which resulted in `subsurface->parent_pending_link` being
inserted into itself, breaking parent's pending subsurface list.
This commit separates finding the requested node and getting it's `prev`
field, fixing the issue.
Similar to commit 85757665e6 ("backend/drm: Check if output is enabled
before sending frame event"), check if the output is still enabled
before sending the frame event. This fixes the bug not only for the DRM
backend, but for wayland and X11 as well.
The protocol specifies that all requests (aside from destroy) are
ignored after the compositor sends the closed event. Therefore,
destroying the wlroots object and rendering the resource inert
when sending the closed event keeps things simpler for wlroots and
compositors.
This wlr_surface_state field was a special case because we don't
want to save the whole current state: for instance, the wlr_buffer
must not be saved or else wouldn't get released soon enough.
Let's just inline the state fields we need instead.
wl_fixed_t is a 32-bit data type, but our doubles are 64-bit. This meant
that two doubles that would map to the same wl_fixed_t could compare
unequal, and send a duplicate motion event.
Refs swaywm/sway#4632.
The protocol allows compositors to not send any keymap to Wayland
clients. Handle a keymap-less keyboard correctly by sending
WL_KEYBOARD_KEYMAP_FORMAT_NO_KEYMAP instead of erroring out in the
mmap call.
When enabling an output, skip the empty buffer allocation if the
backend accepts modesets without a buffer.
This fixes mode-setting with the noop backend.
According to the viewport protocol, upon wp_viewport::destroy():
> The associated wl_surface's crop and scale state is removed.
> The change is applied on the next wl_surface.commit.
Therefore, wp_viewport_destroy(viewport) should remove all viewport state.
Currently, wlroots does not remove the crop and scale state. Instead, a
client must do:
wl_fixed_t clear = wl_fixed_from_int(-1);
wp_viewport_set_source(viewport, clear, clear, clear, clear);
wp_viewport_set_destination(viewport, -1, -1);
wp_viewport_destroy(viewport);
This commit adds the necessary logic into viewport_destroy and makes
wlroots comply with the protocol.
Sometimes we allocate a buffer with modifiers but then fail to
perform a modeset with it. This can happen on Intel because of
bandwidth limitations. To mitigate this issue, it's possible to
re-allocate the buffer with modifiers.
Add the logic to do so in wlr_output.
Adds `wlr_buffer_resource_interface` and `wlr_buffer_register_resource_interface`,
which allows a user to register a way to create a wlr_buffer from a specific
wl_resource.
The first time wlr_buffer_from_resource is called with a wl_buffer
resource that originates from wl_shm, create a new
wlr_shm_client_buffer as usual. If wlr_buffer_from_resource is called
multiple times, re-use the existing wlr_shm_client_buffer.
This commit changes how the wlr_shm_client_buffer lifetime is managed:
previously it was destroyed as soon as the wlr_buffer was released.
With this commit it's destroyed when the wl_buffer resource is.
Apart from de-duplicating wlr_shm_client_buffer creations, this allows
to easily track when a wlr_shm_client_buffer is re-used. This is useful
for the renderer and the backends, e.g. the Pixman renderer can keep
using the same Pixman image if the buffer is re-used. In the future,
this will also allow to re-use resources in the Wayland and X11 backends
(remote wl_buffer objects for Wayland, pixmaps for X11).
When wlr_output manages its own swap-chain, there's no need to
hook into the backend to grab DMA-BUFs. Instead, maintain a
wlr_output.front_buffer field with the latest committed buffer.
This function doesn't need the wl_resource anymore.
In the failure paths, wlr_buffer_unlock in surface_apply_damage
will take care of sending wl_buffer.release.
We often juggle between wlr_buffer and wlr_client_buffer variables.
Use a consistent naming: "buffer" for wlr_buffer and "client_buffer"
for wlr_client_buffer.
`wlr_client_buffer_import` is splitted in two distincts function:
- wlr_buffer_from_resource, which transforms a wl_resource into
a wlr_buffer
- wlr_client_buffer_create, which creates a wlr_client_buffer
from a wlr_buffer by creating a texture from it and copying its
wl_resource
[1] and [2] have introduced new wl_array usage in wlroots, but
contains a mistake: wl_array_for_each iterates over pointers to
the wl_array entries, not over entries themselves.
Fix all wl_array_for_each call sites. Name the variables "ptr"
to avoid confusion.
Found via ASan:
==148752==ERROR: AddressSanitizer: attempting free on address which was not malloc()-ed: 0x602000214111 in thread T0
#0 0x7f6ff2235f19 in __interceptor_free /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cpp:127
#1 0x7f6ff1c04004 in wlr_tablet_destroy ../subprojects/wlroots/types/wlr_tablet_tool.c:24
#2 0x7f6ff1b8463c in wlr_input_device_destroy ../subprojects/wlroots/types/wlr_input_device.c:51
#3 0x7f6ff1ab9941 in backend_destroy ../subprojects/wlroots/backend/wayland/backend.c:306
#4 0x7f6ff1a68323 in wlr_backend_destroy ../subprojects/wlroots/backend/backend.c:57
#5 0x7f6ff1ab36b4 in multi_backend_destroy ../subprojects/wlroots/backend/multi/backend.c:57
#6 0x7f6ff1ab417c in handle_display_destroy ../subprojects/wlroots/backend/multi/backend.c:124
#7 0x7f6ff106184e in wl_display_destroy (/usr/lib/libwayland-server.so.0+0x884e)
#8 0x55cd1a77c9e5 in server_fini ../sway/server.c:218
#9 0x55cd1a77893f in main ../sway/main.c:400
#10 0x7f6ff04bdb24 in __libc_start_main (/usr/lib/libc.so.6+0x27b24)
#11 0x55cd1a73a7ad in _start (/home/simon/src/sway/build/sway/sway+0x33a7ad)
0x602000214111 is located 1 bytes inside of 16-byte region [0x602000214110,0x602000214120)
freed by thread T0 here:
#0 0x7f6ff2235f19 in __interceptor_free /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cpp:127
#1 0x7f6ff1c04004 in wlr_tablet_destroy ../subprojects/wlroots/types/wlr_tablet_tool.c:24
#2 0x7f6ff1b8463c in wlr_input_device_destroy ../subprojects/wlroots/types/wlr_input_device.c:51
#3 0x7f6ff1ab9941 in backend_destroy ../subprojects/wlroots/backend/wayland/backend.c:306
#4 0x7f6ff1a68323 in wlr_backend_destroy ../subprojects/wlroots/backend/backend.c:57
#5 0x7f6ff1ab36b4 in multi_backend_destroy ../subprojects/wlroots/backend/multi/backend.c:57
#6 0x7f6ff1ab417c in handle_display_destroy ../subprojects/wlroots/backend/multi/backend.c:124
#7 0x7f6ff106184e in wl_display_destroy (/usr/lib/libwayland-server.so.0+0x884e)
previously allocated by thread T0 here:
#0 0x7f6ff2236279 in __interceptor_malloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x7f6ff1066d03 in wl_array_add (/usr/lib/libwayland-server.so.0+0xdd03)
[1]: https://github.com/swaywm/wlroots/pull/3002
[2]: https://github.com/swaywm/wlroots/pull/3004
The wl_touch.frame event is used to group multiple touch events
together. Instead of sending it immediately after each touch event,
rely on the backend to send it (and on the compositor to relay it).
This is a breaking change because compositors now need to manually
send touch frame events instead of relying on wlr_seat to do it.
When wlr_output.swapchain is used instead of the backend's, the
buffer_type will be set to SCANOUT even if wlr_output_attach_render
has been called. This tricks wlr_output_damage into thinking the
whole output needs to be repainted.
Workaround this issue by forcing buffer_type to RENDER when the
output has a back-buffer set.
Will clean all of that up when removing the precommit event handler
altogether.
This commit fixes damage tracking on the Wayland, X11 and headless
backends.
Right now we rely entirely on implicit sync for synchronizing
access to GPU buffers. Implicit sync works by setting
synchronization points on the buffer in writers, and letting
readers wait on these sync points before accessing the buffer.
With OpenGL, sync points are created using functions such as
eglSwapBuffers or glFlush. If none of these special functions
are called, no sync point will be created and readers will
potentially access a buffer that hasn't finished rendering yet.
In the context of wlroots, OpenGL is the writer and the backend
(KMS or parent Wayland/X11 session) is the reader. After we're
done rendering a frame, and before passing that frame to the
backend, we need to call glFlush.
glFlush is called when the buffer is detached from the renderer.
This is a task done by output_clear_back_buffer. So let's call
this function before invoking the impl->commit hook, instead of
calling it after.
All of this is maybe a little tricky to get right with the
current renderer_bind_buffer API. The new
wlr_renderer_begin_with_buffer API is much better, because glFlush
is called on wlr_renderer_end, so it's more intuitive.
Closes: https://github.com/swaywm/wlroots/issues/3020
Everything needs to go through the unified wlr_buffer interface
now.
If necessary, there are two ways support for
EGL_WL_bind_wayland_display could be restored by compositors:
- Either by using GBM to convert back EGL Wayland buffers to
DMA-BUFs, then wrap the DMA-BUF into a wlr_buffer.
- Or by wrapping the EGL Wayland buffer into a special wlr_buffer
that doesn't implement any wlr_buffer_impl hook, and special-case
that buffer type in the renderer.
This allows renderers to choose between implementing the old
wlr_renderer_impl.texture_from_wl_drm hook, or opt for the new
wlr_drm stub. The stub has the advantage of not requiring any
special support code: stubbed wl_drm buffers look exactly like
DMA-BUFs from linux-dmabuf-unstable-v1.
This will allow us to remove all of our EGL wl_drm support code
and remove some weird stuff we need just for wl_drm support. In
particular, wl_drm buffers coming from the EGL implementation
can't easily be wrapped into a wlr_buffer properly.
We were bumping the pending sequence number after emitting the
commit event, so commit handlers were seeing inconsistent state
where current.seq == pending.seq. This prevents commit handlers
from immediately locking the pending state.
Fix this by bumping the pending sequence number before firing the
commit event.
There are still many situations where the buffer scale is not
divisible by scale. The fix will require a tad more work, so
let's just log the client error for now and continue handling
the surface commit as usual.
Closes: https://github.com/swaywm/sway/issues/6352
On commit failure, we need to unbind the back buffer from the
renderer.
This fixes assertions triggered on commits following a failed commit
where the compositor called wlr_output_attach_render.
Introduce wlr_shm_client_buffer, which provides a wlr_buffer wrapper
around wl_shm_buffer.
Because the client can destroy the wl_buffer while we still are using
it, we need to do some libwayland tricks to still be able to continue
accessing its underlying storage. We need to reference the wl_shm_pool
and save the data pointer.
This new API allows buffer implementations to know when a user is
actively accessing the buffer's underlying storage. This is
important for the upcoming client-backed wlr_buffer implementation.
Prior to this commit, subsurfaces could only be placed above their
parent. Any place_{above,below} request involving the parent would
fail with a protocol error.
However the Wayland protocol allows using the parent surface in the
place_{above,below} requests, and allows subsurfaces to be placed
below their parent.
Weston's implementation adds a dummy wl_list node in the subsurface
list. However this is potentially dangerous: iterating the list
requires making sure the dummy wl_list node is checked for, otherwise
memory corruption will happen.
Instead, split the list in two: one for subsurfaces above the parent,
the other for subsurfaces below.
Tested with wleird's subsurfaces demo client.
Closes: https://github.com/swaywm/wlroots/issues/1865
There isn't always a good time to prune old tokens. Compositors
which only implement a "give focus on activation" logic can prune
tokens on focus change. However other compositors might want to
implement other semantics, e.g. "mark urgent on activation". In this
case a focus change shouldn't invalidate other tokens.
Additionally, some tokens aren't necessarily tied to a seat.
To avoid ending up with an ever-growing list of tokens, add a timeout.
Instead of passing a wlr_texture to the backend, directly pass a
wlr_buffer. Use get_cursor_size and get_cursor_formats to create
a wlr_buffer that can be used as a cursor.
We don't want to pass a wlr_texture because we want to remove as
many rendering bits from the backend as possible.
According to libinput, release events are generated when device is unplugged,
and libinput copies this behavior for device removal. Let's do the same for
our virtual keyboard.
8f846a41fa
This is another attempt to fix#2034 and the following sway issue:
https://github.com/swaywm/sway/issues/6254
Note that we have other key repeating issues in sway, which aren't addressed
by this patch. Since the virtual keyboard itself isn't destroyed when the
keyboard grab is destroyed, we'll probably need some trick to reset the state
of the corresponding virtual keyboard when the grab is released.
https://github.com/swaywm/sway/issues/6095https://github.com/swaywm/sway/issues/6193
Previously, the same struct was used for linux-dmabuf-v1 params
and buffer. This made the whole logic a little bit awkward, because
a wlr_dmabuf_v1_buffer could either be still being constructed, or
be a complete buffer.
Introduce a separate wlr_linux_buffer_params_v1 struct for buffer
params still being constructed. Once the params are complete (ie.
once the create request is sent), the params struct is destroyed
and the buffer struct is created.
This will help with [1] as well.
[1]: https://github.com/swaywm/wlroots/issues/2664
Drop wlr_dmabuf_v1_buffer_from_params_resource and
wlr_linux_dmabuf_v1_from_resource. Contrary to wl_buffer, these
resources are internal linux-dmabuf-v1 implementation details and
should not be shared with other interfaces.
Use 128-bit hexadecimal string tokens generated with /dev/urandom
instead of UUIDs for xdg-foreign handles, removing the libuuid
dependency. Update readme and CI. Closes#2830.
build: remove xdg-foreign feature
With no external dependencies required, there's no reason not to always
build it. Remove WLR_HAS_XDG_FOREIGN as well.
Some clients (like Xwayland) will fallback to wl_drm if the compositor
doesn't explicitly advertise support for implicit modifiers, even when
the compositor supports explicit modifiers. This behavior sounds correct
from a protocol point of view.
The original motivation is the following crash:
#0 0x00007f0ddeddeef5 in raise () at /usr/lib/libc.so.6
#1 0x00007f0ddedc8862 in abort () at /usr/lib/libc.so.6
#2 0x00007f0ddedc8747 in _nl_load_domain.cold () at /usr/lib/libc.so.6
#3 0x00007f0ddedd7646 in () at /usr/lib/libc.so.6
#4 0x00007f0de033f8de in gles2_get_renderer_in_context (wlr_renderer=0x612000003640) at ../subprojects/wlroots/render/gles2/renderer.c:38
#5 0x00007f0de0341675 in gles2_begin (wlr_renderer=0x612000003640, width=3840, height=2160) at ../subprojects/wlroots/render/gles2/renderer.c:186
#6 0x00007f0de033b100 in wlr_renderer_begin (r=0x612000003640, width=3840, height=2160) at ../subprojects/wlroots/render/wlr_renderer.c:56
#7 0x00007f0de03466ed in gles2_blit_dmabuf (wlr_renderer=0x612000003640, dst_attr=0x60b000150148, src_attr=0x7fff9f9bfde0) at ../subprojects/wlroots/render/gles2/renderer.c:591
#8 0x00007f0de033d717 in wlr_renderer_blit_dmabuf (r=0x612000003640, dst=0x60b000150148, src=0x7fff9f9bfde0) at ../subprojects/wlroots/render/wlr_renderer.c:210
#9 0x00007f0de04cbc3b in frame_handle_output_commit (listener=0x611000220bc8, data=0x7fff9f9c0050) at ../subprojects/wlroots/types/wlr_screencopy_v1.c:303
The GLES2 renderer assumes it'll have a wlr_buffer to render to.
Instead of accomodating for the edge-case of rendering without a
wlr_buffer, drop wlr_renderer_blit_dmabuf calls and instead use
wlr_renderer_bind_buffer just like the rest of the wlr_renderer users.
wlr_renderer_blit_dmabuf is now unused in wlroots.
The upside is that the new blit_dmabuf function in screencopy is
renderer-agnostic.
Compute only the transform matrix in the output. The projection matrix
will be calculated inside the gles2 renderer when we start rendering.
The goal is to help the pixman rendering process.
Store the previously focused surface in `state->focused` as well as in
`state->original` when starting an implicit grab. That way at the end
of an implicit grab, the detection whether the grab started and ended
on the same surface works as intended, even if the original surface was
never left at all.
Since output_destroy() calls wl_list_remove() on the output's link,
the manager must still be valid. This is the same bug fixed in bf926e3
but with a different interface.
Value is now an enum with a new value ("on-demand") that compositors can use to allow "normal" keyboard focus semantics regardless of the layer the client surface is on. An error is sent for invalid keyboard interactivity values. The old behavior is retained for clients using the previous version of the protocol.
Also adjusted the layer-shell example program to use the new keyboard interactivity options.
This function is inferior to wlr_xdg_surface_for_each_popup_surface()
for rendering as it does not iterate over subsurfaces. Furthermore,
no compositor is known to use this to iterate popups for any purpose
other than rendering. Therefore remove the function, which may of course
be reintroduced at a later date if a use-case is found.
Instead of relying on output.pending.committed, use
wlr_output_event_commit to find out whether a buffer was committed.
Eventually output.pending will be cleared before the commit event is
emitted.
References: https://github.com/swaywm/wlroots/issues/2098
This function will allow compositors to implement input handling in a
way consistent with rendering more easily.
Calling wlr_layer_surface_v1_surface_at() and checking if the result is
a wlr_xdg_popup is flawed as there may be subsurfaces in the popup tree.
This function will allow compositors to implement input handling in a
way consistent with rendering more easily.
Calling wlr_xdg_surface_surface_at() and checking if the result is a
wlr_xdg_popup is flawed as there may be subsurfaces in the popup tree.
Since device_destroy() calls wl_list_remove() on the device's link,
the manager must still be valid. However if the manager is destroyed
before the seat as the wl_display destroy handlers are called, devices
listening for the seat to be destroyed will access free'd memory in
wl_list_remove().
Since device_destroy() calls wl_list_remove() on the device's link,
the manager must still be valid. However if the manager is destroyed
before the seat as the wl_display destroy handlers are called, devices
listening for the seat to be destroyed will access free'd memory in
wl_list_remove().
- The DRM backend initially doesn't have a frame scheduled initially.
However the compositor is expected to set a mode to start the
rendering loop (frame_pending is set to true in drm_crtc_pageflip).
- The headless and X11 backends have a timer to schedule frames, so they
ignore this hint completely.
- The Wayland backend renders a fake frame to start the rendering loop.
It's the only case where a frame is pending on init, move the
assumption there.
The DRM backend adds custom modes to wlr_output.modes
Currently modes that are added after the first occurence of
wlr_output_configuration_head_v1 are not added to wlr_output_head.mode_resources.
Only wlr_output_damage works in transformed coordinates,
wlr_output->damage is in output-buffer-local coordinates.
This essentially reverts 1ecc1b5 and fixes 1477401.
Rename wlr_renderer_get_dmabuf_formats to
wlr_renderer_get_dmabuf_texture_formats. This makes it clear the formats
are only suitable for creating wlr_textures.
wlr_surface_send_enter now stores outputs that have been entered.
Combined with a new 'bind' event on wlr_output, this allows us to delay
enter events as necessary until the respective wl_output global has been
bound.
Closes: https://github.com/swaywm/wlroots/issues/2466
xdg_popups can be destroyed by the compositor when closed. When this happens,
wlroots makes the xdg_popup surface inert and resets the xdg_surface role to
NONE.
Currently, wlroots sends a protocol error and asserts that an xdg_surface has
a role when committed. This is racy if at the same time the client commits an
xdg_popup and the compositor closes it. This patch removes the assertion and
ignores commits on xdg_surfaces without a role set.
We were previously exporting DMA-BUFs when receiving the capture_output
request, and sending a done event on wlr_output.events.precommit. Instead,
export and send done on wlr_output.events.commit.
The data of a head is only sent when it is enabled. While the head was disabled
data might have been changed. In this case clients were not informed about this
change. A later enable change that does not also update the other data must
still lead to the propagation of this data.
Since we do not know what other data was changed while the head was disabled
just send together with an enable change all current data.
The protocol requires clients to set opposing anchors when requesting
a width or height of 0.
The goal of this patch is not to break clients that rely on this
behavior but to improve the consistency of the layer shell ecosystem
through adherence to the protocol.
This brings the layer-shell api in line with that of xdg-shell and
avoids reimplementing this function in every compositor in order to
render layer shell popups correctly.
This event contains a `committed` bitfield, which allows callers to know
which output fields changed during the commit.
This allows users to setup a single atomic commit listener, instead of
setting up one listener for each event (mode, scale, transform, and so
on).
References: https://github.com/swaywm/wlroots/issues/2098
These states are distinct in the time period between the ack_configure
and the next commit on the surface. Splitting these states avoids the
following race for example:
- client starts at 1000x1000
- wlr_xdg_toplevel_set_size 500x500
- size is different -> configure sent
- client acks the configure
- wlr_xdg_toplevel_set_size 1000x1000
- compare_xdg_toplevel_state returns true since there is no pending
configure and the currently committed size is still 1000x1000
- no new configure is sent
- client commits at the size it last acked, 500x500
Because wlr_renderer_blit_dmabuf() undoes y-inversion on the source
buffer, it is incorrect to pass the y-inversion flag of the source
buffer to the user.
wlr_drag sets up keyboard, pointer and touch grabs, which block 'enter'
events (and thus focus changes). For the compositor to be able to update
focus (e.g. to focus the drop target) from the destroy handler, the
grabs must be released before the destroy event is signalled.
The output backend API is now mostly state-less thanks to the atomic
hooks (commit and test). There is one exception though: attach_render.
This function makes the rendering context current. However sometimes the
compositor might decide not to render after attach_render (e.g. when
there's nothing new to render to the back buffer). Thus
wlr_output_rollback has been introduced to revert the pending state.
Because the output backend API is mostly state-less, the only thing
wlr_output_impl.rollback needs to do is revert the current rendering
context. Rename the function to rollback_render to make this clear. Add
a check in the common wlr_output code to only call rollback_render when
attach_buffer has been previously called.
On the long term, we'll be able to remove attach_render and
rollback_render together.
During surface finalization we may not have received a new buffer,
resetting width and height in this case is wrong since we display the
old buffer in this case.
This is necessary for some grabs, which currently have no way of knowing
when the pointer/keyboard focus has left a surface. For example, without
this, a drag-and-drop grab can erroneously drop into a window that the
cursor is no longer over.
This is the plumbing needed to properly fix swaywm/sway#5220. The
existing fix, swaywm/sway#5222, relies on every grab's `enter()` hook
allowing a `NULL` surface. This is not guaranteed by the API and, in
fact, is not the case for the xdg-shell popup grab and results in a
crash when the cursor leaves a surface and does not immediately enter
another one while a popup is open (#2161).
This fix also adds an assertion to wlr_seat_pointer_notify_enter() that
ensures it's never called with a `NULL` surface. This will make Sway
crash much more until it fixes its usage of the API, so we should land
this at the same time as a fix in Sway (which I haven't posted yet).
This fixes a crash that happens when a client requests a frame on a
backend that does not implement export_dmabuf.
An assertion fails with the message:
sway: types/wlr_output.c:777: wlr_output_lock_attach_render: Assertion
`output->attach_render_locks > 0' failed.
This introduces the enter and leave events for wlr_keyboard_group.
The enter event is emitted when a keyboard is added to the group while a
key is pressed that is not pressed by any other keyboard in the group.
The data is a wl_array of the pressed key codes unique to the keyboard
that should now be considered pressed.
Similarly the leave event is emitted when a keyboard is removed from the
group while at least one key is pressed that is not pressed by any other
keyboard in the group. The data is a wl_array of the pressed key codes
unique to the keyboard that should now be considered released.
The purpose of these events are to allow the compositor to update its
state to avoid corruption. Additionally, for the leave event, the
focused surface may have been notified of a key press for some or all of
the key codes and needs to be notified of a key release to avoid state
corruption.
These were previously emitted as normal key events, but they are not
normal key events. There is no actual key press or release associated
with the events. It's purely for state keeping purposes. Emitting them
as separate events allows the compositor to handle them differently.
Since these are purely for state keeping purposes and are not associated
with an actual key being pressed or released, bindings should not be
triggered as a result of these events.
We should throw a protocol error if the relevant capability has never
existed when get_(pointer|keyboard|touch) is called. Otherwise, it
should succeed, even if the capability is not currently present.
This follows the spec, and avoids possible races with the client when
capabilities are lost.
Closes: https://github.com/swaywm/wlroots/issues/2227
When calling assert(0) instead of returning a value, -Wreturn-type
warnings are triggered because assertions can be disabled. Replace these
assertions with abort().
This is currently inconsistent with the rest of the library and a bit of
a footgun for new compositors. However, this breaks the API in a very
unfortunate way for existing compositors.
This is necessary so that sway can determine when to start emulating
pointer events -- it shouldn't start doing so during an implicit grab,
even if the pen is over a surface that doesn't bind tablet input.
Refs swaywm/sway#5302.
In the case that only one axis received an event, rotating the input can
cause the change to actually happen on the other axis, as far as clients
are concerned.
This commit updates the axes flags to be consistent post-rotation.
Fixesswaywm/sway#4776.
A client requesting frames in the ready callback may miss frames that
happen while it is waiting to receive the event or sending the request.
If that happens, the client will have an outdated frame for an
indefinite period. A new frame might not be scheduled for a very long
time.
With this change, clients will receive new frames immediately upon
request.
Check for a NULL keyboard_state.keyboard value in
seat_client_create_keyboard() before trying to use it, as is done in
other functions like seat_client_send_repeat_info(). Prevents a segfault
in certain situations on keyboard removal, as seen in the sway issue.
Closes: https://github.com/swaywm/sway/issues/5205
Closes: https://github.com/swaywm/wlroots/issues/2073
GCC is complaining about a maybe-uninitialized variable when doing a
release build. Even if that can't actually happen because all enum
values are handled, add an abort call to silence the warning.
Most of the pending output state is not forwarded to the backend prior
to an output commit. For instance, wlr_output_set_mode just stashes the
mode without calling any wlr_output_impl function.
wlr_output_impl.commit is responsible for applying the pending mode.
However, there are exceptions to this rule. The first one is
wlr_output_attach_render. It won't go away before renderer v6 is
complete, because it needs to set the current EGL surface.
The second one is wlr_output_attach_buffer.
wlr_output_impl.attach_buffer is removed in [1].
When wlr_output_rollback is called, all pending state is supposed to be
cleared. This works for all the state except the two exceptions
mentionned above. To fix this, introduce wlr_output_impl.rollback.
Right now, the backend resets the current EGL surface. This prevents GL
commands from affecting the output after wlr_output_rollback.
This patch is required for FBO-based outputs to work properly. The
compositor might be using FBOs for its own purposes [2], having leftover
FBO state can have bad consequences.
[1]: https://github.com/swaywm/wlroots/pull/2097
[2]: https://github.com/swaywm/wlroots/pull/2063#issuecomment-597614312
Check that buffer can be scanned out in wlr_output_test instead of
wlr_output_attach_buffer. This allows the backend to have access to the
whole pending state when performing the check.
This brings the wlr_output API more in line with the KMS API.
This removes the need for wlr_output_attach_buffer to return a value,
and for wlr_output_impl.attach_buffer.
Consumers call wlr_buffer_lock. Once all consumers are done with the
buffer, only the producer should have a reference to the buffer. In this
case, we can release the buffer (and let the producer re-use it).
This fixes an assertion failure if a client tries to do this, e.g. by
creating multiple toplevel objects for the same surface. If the same
role data is set multiple times, this does not cause an error, which is
how cursors use this interface.
This patch disambiguates the needs_frame event by uncoupling it from
damage. A new separate damage event is emitted when the backend damages
the output (this happens e.g. VT is changed or software cursors are
used). The event specifies the damaged region.
The wlr_output.damage field is removed. wlr_output is no longer
responsible for tracking its own damage, this is wlr_output_damage's
job.
This is a breaking change, but wlr_output_damage users shouldn't need an
update.
Bugs fixed:
- Screen flashes on VT switch
- Cursor damage issues on the X11 and headless backends
Closes: https://github.com/swaywm/sway/issues/5086
This way, wlr_output_schedule_frame will always be followed by a
wlr_output_commit. This forces the compositor to render an extra
frame before stopping the rendering loop.
To test, run wleird's frame-callback [1], make sure it's the only
visible client on the output and check the interval between frame
events is the output's refresh period instead of zero.
[1]: https://github.com/emersion/wleird/blob/master/frame-callback.c
Closes: https://github.com/swaywm/wlroots/issues/2051
Split out the client/resource handling out of wlr_buffer by introducing
wlr_client_buffer. Make wlr_buffer an interface so that compositors can
create their own wlr_buffers (e.g. backed by GBM, like glider [1]).
[1]: c66847dd1c/include/gbm_allocator.h (L7)
This function allowed backends to provide a custom function for frame
scheduling. Before resuming the rendering loop, the DRM and Wayland
backends would wait for vsync.
There isn't a clear benefit of doing this. The only upside is that we
get more stable timings: the delay between two repaints doesn't change too
much and is close to a mutliple of the refresh rate.
However this introduces latency, especially when a client misses a
frame. For instance a fullscreen game missing vblank will need to wait
more than a whole frame before being able to display new content. This
worst case scenario happens as follows:
- Client is still rendering its frame and cannot submit it in time
- Deadline is reached
- Compositor decides to stop the rendering loop since nothing changed on
screen
- Client finally manages to render its frame, submits it
- Compositor calls wlr_output_schedule_frame
- DRM backend waits for next vblank
- The wlr_output frame event is fired, compositor draws new content on screen
- On the second next vblank, the new content reaches the screen
With this patch, the wlr_output frame event is fired immediately when
the client submits its late frame.
This change also makes it easier to support variable refresh rate, since
VRR is all about being able to present too-late frames earlier.
References: https://github.com/swaywm/wlroots/issues/1925
This makes sure the `wl_list_remove(&output_power->link)` in
`output_power_destroy()` does not crash even when the output_power never
got added to a list. This can e.g. happen in the `mgmt->output ==
output` error path of `output_power_manager_get_output_power`.
Leave positioner inverted on the individual axis if it's no longer
constrained. Otherwise constraint adjustment like `slide_x & flip_y`
could render popup outside of the screen when both axes are constrained.
FixesAlexays/Waybar#532
Port back style and naming improvements suggested in
https://github.com/swaywm/wlroots/pull/2026 for
keyboard-shortcuts-inhibit. These are all internal to the implementation
and therefore unproblematic.
Also, retrieve the inhibitor resource version from the manager resource
instead of setting it statically.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
The keyboard shortcuts inhibitor protocol is useful for remote desktop
and virtualization software in order to request all keyboard events to
be passed to it and (almost) none being resonded to by the compositor.
This allows the session at the other end of the remote desktop
connection or inside the virtual machine to be interacted with as usual
(e.g. Alt+Tab to switch windows on the remote system instead of
locally).
Add the wayland protocol to the meson build files.
Copy'n'search'n'replace the very similar idle inhibit protocol
implementation. This already provides all the basic functionality:
- creating and destroying inhibitors upon request by a client,
- destruction in reaction to destruction of surfaces or displays,
- a list of inhibitors to search through for existing ones as well as
- a signal to be sent to the compositor upon registration of a new
inhibitor.
Beyond that we add the active and inactive events to be sent to the
client and wire those to activate and deactivate functions for the
compositor to call in confirmation of activation of a new inhibitor or
(un-)suspending of an existing inhibitor e.g. in response to a special
key combination entered by the user as suggested by the protocol.
As mandated by the protocol, we check the existance of an inhibitor for
a given surface and seat upon creation and return the error provided by
the protocol for that purpose.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Closes: https://github.com/swaywm/wlroots/issues/1817
Previously, if the current configuration contains an output X which is
destroyed, its head is automatically removed. If the compositor submits
the new configuration after X was removed, the current output
configuration is incorrectly detected to be the same as the previous
one, and no done event is sent. To prevent this, we can just keep track
of whether the current configuration is dirty, i.e whether we have sent
a done event for it.
This change ensures that wlr_output_transform_compose correctly composes
transforms when the first transform includes a rotation and the second
transform includes a flip.
The Wayland protocol specifies output transform rotations to be
counterclockwise and applied to the surface. Previously, wlroots
copied Weston and incorrectly made rotations act clockwise on
surfaces. This commit fixes that.
This change will break compositors which expect transform rotations
to be clockwise, and the rare applications that make use of surface
transforms.
Having 1.16 results in the following error when running the compositor:
2019-04-27 17:30:50 - [wayland] wl_global_create: implemented version for 'wl_seat' higher than interface version (7 > 6)
2019-04-27 17:30:50 - [sway/input/seat.c:428] seat_create:could not allocate seat
We require wayland-server >= 1.17 for wl_seat version 7.
Fixes: a671fc51d2 ("Advertise wl_seat version 7")
Fixes: a656e486f4 ("seat: fallback to v6 if libwayland 1.17 isn't available")
Most resources must not be NULL. Make it so callers need to check for
NULL explicitly. This makes it clearer in the handlers code that the
NULL wl_resource case needs to be handled, and allows callers to make a
difference between a NULL wl_resource and an inert resource.
This fixes a memory leak the refresh_state function for
wlr_keyboard_group. The event struct was being dynamically allocated and
never free'd. This changes it to a static allocation.
Since [1], the xdg-output description is mutable. Listen to output
description changes and send the new output description when updated.
[1]: 048102f21a
wlr_output.description is a string containing a human-readable string
identifying the output. Compositors can customise it via
wlr_output_set_description, for instance to make the name more
user-friendly.
References: https://github.com/swaywm/wlroots/issues/1623
Bumps minimum version to 0.51.0
- Remove all intermediate static libraries.
They serve no purpose and are just add a bunch of boilerplate for
managing dependencies and options. It's now managed as a list of
files which are compiled into libwlroots directly.
- Use install_subdir instead of installing headers individually.
I've changed my mind since I did that. Listing them out is annoying as
hell, and it's easy to forget to do it.
- Add not_found_message for all of our optional dependencies that have a
meson option. It gives some hints about what option to pass and what
the optional dependency is for.
- Move all backend subdirectories into their own meson.build. This
keeps some of the backend-specific build logic (especially rdp and
session) more neatly separated off.
- Don't overlink example clients with code they're not using.
This was done by merging the protocol dictionaries and setting some
variables containing the code and client header file.
Example clients now explicitly mention what extension protocols they
want to link to.
- Split compositor example logic from client example logic.
- Minor formatting changes
In case the texture can't be imported, release the buffer so that the
client can submit another one. In case the allocation fails, disconnect
the client.
Some globals are static and it doesn't make sense to destroy them before
the wl_display. For instance, wl_compositor should be created before the
display is started and shouldn't be destroyed.
For these globals, we can simplify the code by removing the destructor
and stop keeping track of wl_resources (these will be destroyed with the
wl_display by libwayland).
Most of the time, compositors just display the surface's current buffer
on an output. Add an helper to make it easy to support presentation-time
in this case.
The wlr_presentation_feedback struct now tracks presentation feedback
for multiple resources (but still a single surface content update). This
allows the compositor to properly send presentation events even when
there is more than one frame of latency or when it references a
surface's buffer.
Backends not supporting presentation feedback call
wlr_output_send_present with a NULL event in their commit handler. Since
the commit hasn't been applied yet, commit_seq still has its old value.
We need to increment it.
An alternative would be to move commit_seq in wlr_output_state. This
would allow to have a pending and a current commit_seq.
wlr_output_send_present could take the pending commit_seq when called
with a NULL event.
This requires functions without a prototype definition to be static.
This allows to detect dead code, export less symbols and put shared
functions in headers.
This is set to the value of wlr_output.commit_seq when the frame has
been submitted. This allows tracking presentation with more then 1 full
frame of latency.
References: https://github.com/swaywm/wlroots/issues/1917
A wlr_keyboard_group allows for multiple keyboard devices to be
combined into one logical keyboard. Each keyboard device can only be
added to one keyboard group. This helps with the situation where one
physical keyboard is exposed as multiple keyboard devices. It is up to
the compositors on how they group keyboards together, if at all.
Since a wlr_keyboard_group is one logical keyboard, the keys are a set.
This means that if a key is pressed on multiple keyboard devices, the
key event will only be emitted once, but the internal state will count
the number of devices that the key is pressed on. Likewise, the key
release will not be emitted until the key is released from all devices.
If the compositor wants access to which keys are pressed and released
on each keyboard device, the events for those devices can be listened
to, as they currently are, in addition to the group keyboard's events.
Also, all keyboard devices in the group must share the same keymap. If
the keymap's differ, the keyboard device will not be able to be added
to the group. Once in the group, if the keymap or effective layout for
one keyboard device changes, it will be synced to all keyboard devices
in the group. The repeat info and keyboard modifiers are also synced
If box->width/height is <= 0, the box doesn't contain any points, and so
there is no closest point. wlr_box_closest_point should return NAN in this
case.
In addition, we need to handle empty boxes in a few other
output-layout-related places, because outputs can have size 0x0 when
they are created or destroyed.
Since e26217c51e3a5e1d7dfc95a8a76299e056497981, touchpoints can outlive
surfaces. This works fine as long as the client stays around, but fails
horribly otherwise; therefore we have to make sure that touchpoints don't
outlive their clients.
Fixes#1788
When the surface is closed, we destroy all pending serials waiting to be
accepted. This means we need to ignore any future ack events, because we
can have the following events:
1. -> configure()
2. -> close()
3. <- ack_configure()
At point 3, wlroots will error the client because of invalid serial,
however the client hasn't processed close() yet.
This destroys the xdg popups associated with a layer surface when the
layer surface is unmapped. It does not make sense to keep the popups
open when unmapped.
From the xdg-shell specification:
If the parent is unmapped then its children are managed as
though the parent of the now-unmapped parent has become the
parent of this surface. If no parent exists for the now-unmapped
parent then the children are managed as though they have no
parent surface.
It's added to manager->input_methods list in manager_get_input_method, but
wasn't removed anywhere, leading to possible use-after-free in
wlr_input_method_manager_v2_destroy.
This adds support for xdg-output-unstable-v1 version 3, added in [1].
The xdg_output.done event is now deprecated and is replaced with
wl_output.done.
[1]: 962dd53537
This commit makes more output properties (mode, enabled, scale and transform)
atomic. This means that they are double-buffered and only applied on commit.
Compositors now need to call wlr_output_commit after setting any of those
properties.
Internally, backends still apply properties sequentially. The behaviour should
be exactly the same as before. Future commits will update some backends to take
advantage of the atomic interface. Some backends are non-atomic by design, e.g.
the X11 backend or the legacy DRM backend.
Updates: https://github.com/swaywm/wlroots/issues/1640
Isaac Freund
Alexander Orzechowski
Kenny Levinsen
Mark Bolhuis
yiqiang
Simon Ser
Quantum
Kirill Primak
José Expósito
Rouven Czerwinski
Johan Malm
Consolatis
Manuel Stoeckl
Guido Günther
Ferdinand Bachmann
Leonardo Hernández Hernández
Simon Zeni
David96
Sebastian Krzyszkowiak
Roman Gilg
Tadeo Kondrak
Stacy Harper
David Rosca
Kirill Primak
tiosgz
John Lindgren
Jonathan Wong
Ronan Pigott
Andri Yngvason
Devin J. Pohly
Isaac Freund
Tudor Brindus
zccrs
Yuya Nishihara
Ryan Farley
Justus Rossmeier
Daniel Kondor
Ilia Bozhinov
Marten Ringwelski
Drew DeVault
Daniel De Graaf
Antonin Décimo
xdavidwu
Greg V
Thomas Hebb
Brian Ashworth
Kalyan Sriram
Scott Anderson
Aleksei Bavshin
Michael Weiser
Dorota Czaplejewicz
Josef Gajdusek
Timidger
Alynx Zhou
György Kurucz
Ivan Molodetskikh
amingin
Markus Ongyerth
Versus Void
Sebastian Krzyszkowiak
Jason Francis