- Restore old one if we weren't part of a block (should be NULL anyway)
- Check current_input_config got properly allocated
- free temporary current_input_config when done using it
Sometimes it doesn't really make sense to quote them (numeric values for
example)
In that case, the value is parsed until the next space or the end of the
whole criteria expression
`workspace_next_name` parses workspace commands to find the default
workspace names. It handled " " as a separator, which prevents the use
of workspace names with spaces.
When killing views with `close_views` a use-after-free can sometimes
occur because parent views are killed before their children. This commit
makes `container_map` run functions on child containers before their
parent, fixing the race.
Fixes#1302
This commit implements the StatusNotifierItem protocol, and enables
swaybar to show tray icons. It also uses `xembedsniproxy` in order to
communicate with xembed applications.
The tray is completely optional, and can be disabled on compile time
with the `enable-tray` option. Or on runtime with the bar config option
`tray_output none`.
Overview of changes:
In swaybar very little is changed outside the tray subfolder except
that all events are now polled in `event_loop.c`, this creates no
functional difference.
Six bar configuration options were added, these are detailed in
sway-bar(5)
The tray subfolder is where all protocol implementation takes place and
is organised as follows:
tray/sni_watcher.c:
This file contains the StatusNotifierWatcher. It keeps track of
items and hosts and reports when they come or go.
tray/tray.c
This file contains the StatusNotifierHost. It keeps track of
sway's version of the items and represents the tray itself.
tray/sni.c
This file contains the StatusNotifierItem struct and all
communication with individual items.
tray/icon.c
This file implements the icon theme protocol. It allows for
finding icons by name, rather than by pixmap.
tray/dbus.c
This file allows for asynchronous DBus communication.
See #986#343
Increase _POSIX_SOURCE value where needed.
Increase _XOPEN_SOURCE value where needed.
Conditionally link to libcap (only on Linux).
Possibly some trailing whitespace fixes (automatic).
- When policies are allocated, the ipc target path goes
through symlink resolution. The result is used as
the canonical for matching pids to policies at runtime.
In particular, this matches up with the target of
the `/proc/<pid>/exe`.
- There's a possible race condition if this isn't done
correctly, read below.
Originally, validate_ipc_target() always tried to resolve
its argument for symlinks, and returned a parogram target string
if it validates. This created a possible race condition with
security implications. The problem is that get_feature_policy()
first independently resolved the policy target in order to check
whether a policy already exists. If it didn't find any, it called
alloc_feature_policy() which called validate_ipc_target() which
resolved the policy target again. In the time between the two
checks, the symlink could be altered, and a lucky attacker could
fool the program into thinking that a policy doesn't exist
for a target, and then switch the symlink to point at another file.
At the very least this could allow him to create two policies
for the same program target, and possibly to bypass security
by associating the permissions for one target with another,
or force default permissions to apply to a target for which
a more specific rule has been configured. So we don't that.
Instead, the policy target is resolved once and that result is
used for the rest of the lookup/creation process.
In i3 every mark is unique and one mark cannot be used in more than one
window, sway behavior has been amended to match this.
`swaymsg -t get_marks` will now return an array of all marks used in sway.
See #98
- Moved ``<sys/capability.h>`` include inside `__linux__` guard,
because all uses are similarly guarded.
- <sys/capability.h> is part of an optional devel package, at least
in fedora. CMake now explicitly checks that libcap devel files
are available.
- Added libcap to the list of install packages in .travis.yml, to
make the dependency explicit. travis-ci installs the package by
default, which is why this hasn't surfaced previously.
This commit changes how commands decide what container to act on.
Commands get the current container though `current_container`, a global
defined in sway/commands.c. If a criteria is given before a command,
then the following command will be run once for every container the
criteria matches with a reference to the matching container in
'current_container'. Commands should use this instead of
`get_focused_container()` from now on.
This commit also fixes a few (minor) mistakes made in implementing marks
such as non-escaped arrows in sway(5) and calling the "mark" command
"floating" by accident. It also cleans up `criteria.c` in a few places.
This commit adds three commands to sway: `show_marks`, `mark` and
`unmark`. Marks are displayed right-aligned in the window border as i3
does. Marks may be found using criteria.
Fixes#1007
Fixes#1120
When the parent of a view is C_WORKSPACE and the movement direction
is either MOVE_PREV or MOVE_NEXT, the code would attempt to move the
views to the next output, but swayc_adjacent_output can't accept
non-directional movement commands and causes undefined behaviour and
a segfault.
If the code is simply skipped, we end up in an infinite loop.
Instead, we can allow containers whose parent is a C_WORKSPACE take the
path that handles MOVE_PREV and MOVE_NEXT, which behaves as you would
expect.
I'm not certain that this fix is entirely correct as the desired behaviour
of move_container is not very well defined, but it seems to work.
Hardcoding it to L_HORIZ does not make sense to me,
as you get the unexpected behaviour that windows will be
arranged horizontally until you switch the layout.
As best I can tell this todo was intended to add workspace movement to
the given output with the `workspace <ws> output <op>` command, but i3
does not behave this way.
This commit allows unquoted spaces in worspace names in order to keep
compatability with i3. The names _must not_ contain the string "output"
which is documented in 'sway.5' because how sway detects the `move
<workspace> output <output>` command. Also I documented that "number"
may be used before the worspace name without affecting how the name is
evaluated.
This commit lets the 'move' command apply to floating containers as well
as tiled ones. The command may be appended with a number of pixels and
then optionally the string `px` (like '10 px') in order to move the
container more or fewer than the standard ten pixels.
Previous implementation would not preserve dimension of groups
along the major axis. This should avoid weird behavior when
using container motion commands.
This fixes issue #733. Now if the user focuses output right but is at
the rightmost monitor, the focus will wrap the the leftmost monitor.
This commit adds a new function, swayc_opposite_output, which selects
the opposite output given a position and a direction. Now, when calling
output_by_name, we first check if there is an adjacent output to switch
to. If that fails, we call swayc_opposite_output to handle wrapping.
- "layout auto_left|auto_xxx" are now "layout auto xxx"
- "layout incmaster <n>" is now "layout auto master [set|inc] <n>"
- "layout incncol <n>" is now "layout auto ncol [set|inc] <n>"
- prior to this modification, the requested pixels were added/removed
to both edges of the modified container. To preserve sizes,
only half the pixels should be added/removed to each edge.
- added L_AUTO_FIRST/LAST instead of using explicit layouts.
- when switching between auto layout that don't share the same major axis, invert the
width/height of their child views to preserve their relative proportions.
Don't switch the internal tracking of focus to the swaylock surface,
to allow for switching back to the previously active window (or the
currently active window, if some new process changed).
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
When destroying lock surfaces, we really should only unlock a
desktop_shell if the set of lock surfaces has dropped to zero (since
callers need to do a set_lock_surface for every output).
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Exherbo installs architecture dependent data in a different place than architecture
independent data. More concretely: binaries go in /usr/$chost/{bin,lib},
data goes in /usr/share and configs in /etc, /etc is already configurable
through CMAKE_INSTALL_FULL_SYSCONFDIR but the datadir was not. This
patch fixes it so that things can be pushed in the right places.
- Make sure CMake always finds absolute paths for Cairo, Pango and GdkPixbuf
- Add forgotten json-c include path to swaymsg/CMakeLists.txt
- Disable -Werror because of assert warnings
- Add correct /proc/pid/file path for FreeBSD
- Use libepoll-shim on FreeBSD
- Only use Linux capabilities on, well, Linux
For workspace containers, swayc_change_layout also changes ->layout alongside
->workspace_layout when it's a sensible thing to do. There is an additional test
for 'layout toggle' command which ensures that containers will be tiled
horizontally after toggling from tabbed or stacked.
If workspace layout is set to tabbed or stacked, its C_VIEW children
should get wrapped in a container. Alongside that, move_container was
modified to retain previous functionality.
LD_PRELOAD enables keyloggers to easily be made. This solution isn't
perfect - really a secure system wouldn't have LD_PRELOAD at all. It was
a stupid idea in the first place.
Some users may want to switch buttons on their input devices, turns out
libinput already supports it. Let's add a support for it in our config.
Signed-off-by: Michał Winiarski <knr@hardline.pl>
This does two important things when using alpha:
1. At corners, borders don't double in opacity
2. Foreground elements (text) can be made transparent and you can see
fully through to the wallpaper
Add swayc_change_layout function, which changes either layout or
workspace_layout, depending on the container type. Workspace being
always L_HORIZ makes this much more i3-compatible.
This is necessary because commands in the config file (mode for
instance) emit ipc events, and if ipc_init has not been called the
ipc_clients_list is not initialized, and we segfault. This fixes that
bug.
This implements commands such as:
workspace number 9: test
If a workspace with the given number exists then it will be focused,
otherwise a new workspace with the given name will be created.
When using a bar on a named output, load_swaybars() requires the
output to be active (ie. in the root container), but this is not the case if
the bar is added to the last output. To fix this, load_swaybars() is now
called after the output has been added to the root container.
After fixing that, swaybar would segfault due to using the wrong index
variable when loading outputs and config.
Indicator border color is now used only when a container is the only
child. Reason for the change? i3 does it this way. Sway container
borders are now a bit more similar to i3 ones.
This patch makes it possible to move views between outputs using the
`move left|right|up|down` commands.
It behaves similar to i3 with one important difference. The focus will
always follow the view being moved, unlike i3 where the focus doesn't
always follow the view to a new output (I assume that's a bug in i3).
`vertical` and `horizontal` should be swapped.
If border_left and border_right were set to 0, the vertical borders
instead of the horizontal borders would be hidden.
i3 handles this command equally.
Fixes#819. If workspace is focused and command 'move container to
workspace/output' is issued, workspace child containers are wrapped in a
new container and moved according to command.
This is a feature that can't work the same as i3, because there is no
real window classes in wayland. This way, we avoid null titles as much
as possible.
When workspace_auto_back_and_forth is enabled, workspaces get switched
twice with previously mentioned command, which is not the expected
behavior.
Removes one redundant creation of previous workspace.
Focus the container on the output (not the output itself) when an output is
focused.
This is intended to fix a bug where borders are not updated correctly when
switching the vt away/back to sway.
When switching back to a workspace after new window creation, it is now
necessary to descend the focus stack into the focused container of the
workspace to determine which container should get the focus. This is because
the `set_focused_container()` function no longer automatically descends into
the focus stack to find the correct view to focus.
Replace `update_view_border()` with `update_container_border()`. The latter
should handle both the case where the container is a view or if the container
has children.
The previous implementation of focus handling assumed that only views can be
focused. Containers can also be focused with a command like `focus parent` or
`focus child`.
Change `set_focused_container()` to handle the case of the given container
being a container with children and update borders accordingly.
Deeply nested containers which had their layouts changed didn't update
their actual_geometry, this messed up their child containers. Those got
width and height of 0, which was then decreased for stacked/tabbed
containers by title height. Underflow ensued, these containers suddenly
had height 4294967273. In short, not updating actual_geometry didn't
play nicely with nested containers.
When titlebar is hidden, top border of the topmost view inside
tabbed/stacked container will not be drawn. This is changed in layout.c
On the other hand, top border should be drawn sometimes, for example
when titlebar is hidden on a view that is not the topmost inside
tabbed/stacked container. This is changed in border.c
Previously, cmd_kill only closed a focused view, while containers were
not affected. Now it closes all views that are children of the focused
container.
Whenever a stacked or tabbed container has focused, paint the titlebars of all
its child windows to be focused as well to indicate the parent stack/tab
container has the focus.
In `move_focus()`, when given an output, set the focus to the workspace of that
output instead of the output itself.
This fixes a bug that did not allow users to switch between outputs introduced
in afc6ad6.
It also fixes other issues before that commit when a workspace with children
was selected and the user tried to switch focus in the direction of another
output.
In the `focus parent` command, do not set focus above the workspace level.
These containers are not meant to be focused.
This prevents a crash on repeated `focus parent` commands.
Panels were explicitly rendered by calling wlc_surface_render in
handle_output_pre_render. Calling wlc_surface_render does not set the
surface's geometry (like wlc_view_set_geometry does). Sway did not call
wlc_view_set_geometry for panels, so wlc defaulted their geometry to be at
the origin. This is not correct for bars unless their location is top.
Furthermore, for a surface to receive pointer events, its mask has to be
set to visible. This causes wlc to render these surfaces, causing panels
and backgrounds to be rendered twice.
This commit makes panels and surfaces visible, sets the correct geometries
and removes the code that explicitly rendered them.
Tabbed/stacked containers are now created only if a view is present on
the workspace. If a view is created on previously empty tabbed/stacked
workspace, it gets wrapped in a container.
Prior to this commit all windows (e.g. shell surfaces) were handled the same
way in handle_view_created. Since backgrounds and panels have to be treated
differently, they could not be shell surfaces. This changes checks whether
a client is a background or a panel in handle_view_created and exists to
let them be dealt with elsewhere.
This fixes a segfault, when trying to get parent of the workspace/root container/(?), as it is not assuered that the view's parent node is not null in the loop
Escape line return when reading from a file with the '\' character.
Similar to shell scripts.
Signed-off-by: Roosembert Palacios <roosembert.palacios@epfl.ch>
Escape line return in configuration file with the '\' character. Similar
to shell scripts.
Signed-off-by: Roosembert Palacios <roosembert.palacios@epfl.ch>
Values cannot be negative or 0; if so uses the default 75x50.
Uses the same syntax as i3: floating_minimum_size <width> x <height>, although the x can be anything.
when creating a new output, move to that output all extant workspaces
that are assigned to that output.
(unrelated) remove comment that was no longer applicable, fix spacing in
an assignment
When headers were installed in more sofisticated places (but package
config knows it right), it revealed missing paths in CMake
configuration. Lets fix it.
This patch makes sure to clear the border buffer of fullscreen view so
the border doesn't get drawn behind a fullscreen view, which would be
visible if the view was transparent.
When creating a new view, wlc usually returns an initial geometry with
size 1x1. Setting those values as desired width/height causes a problem
for some windows (QT5) because they don't request a new geometry for
instance when made floating, so the floating window becomes 1x1.
To fix this problem we can just omit setting the desired width/height on
new_view and instead let the clients request a certain size if they feel
like it. e.i. gnome-calculator.
Fix#578
I made this configurable but I didn't make the command for it. That's
left as an exercise to an eager contributor.
mod_scroll_behavior [gaps inner|gaps outer]
Would merge implementions of more behaviors for mod+scroll, if anyone
has some neato ideas.
The borders are implemented as a surface/buffer attached to each view
which is sent to and rendered by wlc in the view_pre_render callback.
All the drawing logic is handled in sway/border.c and all the logic for
calculating the geometry of the border/view is handled in
`update_geometry` in sway/layout.c (same place as gaps are calculated).
The include command (`include <path>`) makes it possible to include sub
config files from the main config file (or from within other sub config
files).
The include command uses the following rules for including config files:
* the `path` can be either a full path or a path that is relative to the
parent config. Shell expansion is supported, so it's possible to do
`include ~/.config/sway.d/*`.
* The same config file can only be included once (to prevent include
cycles). If a config is included multiple times it will just be
ignored after it has been included once.
* Including a sub config file is the same as inserting the content of
that file into the parent config, thus rules about overwriting
bindsyms etc. works the same as for a single config.
Implement #542
Sway has been very strict when it comes to key handling. Only on an
exact match would a bindsym be triggered.
This patch makes it less strict by for instance allowing the key combo
`$mod+1+2` to act as `$mod+2` if 2 was the last pressed key and `$mod+1`
if 1 was the last pressed key.
The new key handling uses the following algorithm:
1. List of bindings sorted by number of keys in binding (already the
default)
2. Find all bindings covered by the current keyboard state and list them
by same order as in 1.
3. Select the first binding from the list where the last pressed key is
part of the binding.
Addresses #452
Before passing a command to a command handler the quotes are stripped
from each argument in the command. This is usually the wanted behavior
but causes a problem in the case of `exec` where quoted arguments can be
required when passing the exec command to `/bin/sh -c`.
This patch makes `exec` a special case and doesn't strip quotes from the
arguments. It will just pass the exec command verbatim to the exec
command handler.
Fix#518
desktop_shell.panel_size was only used to determine if sway should
rearrange the output when rendering the panel in the output_pre_render
hook. This is not needed since the output will have been arranged at
that point.
It also caused sway to rearrange all the time when running with two
or more different monitors/resolutions because panel_size kept changing
with every output_pre_render callback.
Should fix#514
Swaylock spawns and focuses a view for each output in sway. This can
sometimes move the focus to a new output after locking and unlocking the
screens.
This patch makes sure that the output which had focus when swaylock
was invoked, will regain focus once swaylock is closed/unlocked.
Fix#499
Documents most of the bar commands in sway-bar(5) manpage.
The following command has not been document because they haven't been
fully implemented yet:
* mode
* hidden_state
* modifier
* tray_output
* tray_padding
Close#375
This should be a real fix for #509
This schedules a render when a background or panel is added to sway
through the desktop shell interface, that makes sure the render isn't
scheduled before the bg or panel is ready and you don't end up with a
black screen until the cursor is moved.
This makes sure that the outputs are rendered when sway is launched, so
the user doesn't have to move the cursor before the background and bar
gets rendered on screen.
Fixes#509
It's possible to assign workspaces to certain outputs using the command:
workspace <name> output <output>
However, this did not work in some cases where the workspace was
assigned before the given output was made available to sway.
This patch fixes those cases.
In anticipation for #375, reorganized and augmented slightly sway(5)
so it makes a difference between commands intended for configuration,
commands intended for control, and those that can serve as both.
This patch aims to correctly handle moving focus <left|right|up|down>
between outputs.
For instance, if moving from one output to a new output at the left of
the current one, it should focus the right-most view/container on the
new output, and the opposite if moving from right to left. This should
happen regardless of the previously stored focus of the new output.
This also handles moving to a new output above or below the current one.
Calling `exit` in sway_terminate prevents sway from correctly shutting
down (freeing data, cleanly terminating the ipc server, etc.).
A better way is to exit straight away if the failure occurs before
`wlc_run` and use sway_abort as usual if it occur when wlc is running.
Sway used to attempt sending an IPC command composed of every argument
after the first non-option argument encountered.
Now, raises an error if an option is encountered before the intended command.
Some options such as -h or -v take effect when parsing, so they still
apply.
The get-socketpath long option had an undocumented short alternative
as `p`. It has been removed.
However, the code in the options array is still the 'p' char.
This makes sure that a named output config is applied before the
general wildcard config when a new output is created. This ensures that
the config:
output * ...
output NAME ...
behaves the same way as:
output NAME ...
output * ...
This makes IPC GET_PIXELS use the new `wlc_pixels_read` call instead of
the deprecated `wlc_output_get_pixels`.
The old version worked by passing a callback function to wlc which would
grab the pixels and send them to the IPC client.
The new version works by maintaining a list of clients who have
requested the pixels of some output and then grap and send the pixels in
the output_post_render hook of the `wlc_interface`.
This adds quotes around multiword arguments before they are passed to
`/bin/sh -c` in an exec command.
Example:
I connect to irc like this:
exec termite -e "mosh server tmux a"
Without this patch the arguments are passed to sh as:
termite -e mosh server tmux a
When it should be:
termite -e "mosh server tmux a"
For the command to work.
This is a possible fix for #384.
To be honest I don't fully understand why this bug is happening, but I
have narrowed it down to the view stack in wlc and how sway orders views
in very specific situations (those described in #384).
Anyway this should fix the problem by eliminating the call to
`wlc_view_bring_to_front` which isn't really needed anyway since sending
all invisible views to the back is the same as bringing all visible
views to the front (rotating the view stack).
CMAKE_INSTALL_FULL_SYSCONFIG is not actually passed to
the C preprocessor. I remember it working, so I must have
messed up somewhere last time I touched this.
This is fixed by manually passing its value to the C preprocessor
through the SYSCONFDIR definition
Fix#444
This is a temporary fix, the real fix is to store the commands as a
formatted argv array, so they don't have to be reformatted all over the
place.
Dominique Martinet
Drew DeVault
Tony Crisci
Calvin Lee
emersion
Dan Robertson
Mykyta Holubakha
David Hurst
madblobfish
Johannes Lundberg
David Zero
lbonn
Zuzana Svetlikova
Jonas Karlsson
azarus
Ilya Lukyanov
Scott Anderson
nyorain
Tobias Blass
wdbw
Josip Janzic
Zandr Martin
Sebastian Noack
Tomáš Čech
Vasilij Schneidermann
Jerzi Kaminsky
Jarkko Oranen
Jaanus Torp
John Chen
Frantisek Fladung
wil
willakat
Daniel Kessler
Aleksa Sarai
Nicolas Cornu
Wouter van Kesteren
Greg V
D.B
Michał Winiarski
Nicolas Cornu
Zandr Martin
Patrick Sauter
Ryan Dwyer
Mikkel Oscar Lyderik
Drew DeVault
Lukas Lihotzki
James Murphy
Götz Christ
Guillaume Brogi
Manuel Mendez
minus
David Eklov
Zandr Martin
thuck
Roosembert Palacios
Eric Engestrom
Jasen Borisov
Daniel Lockyer
Raman Varabets
Tomáš Čech
Chang Liu
Kevin Hamacher
crondog
Kevin Hamacher
Yacine Hmito
progandy
Quentin Glidic
Christoph Gysin
Cole Mickens