The output backend API is now mostly state-less thanks to the atomic
hooks (commit and test). There is one exception though: attach_render.
This function makes the rendering context current. However sometimes the
compositor might decide not to render after attach_render (e.g. when
there's nothing new to render to the back buffer). Thus
wlr_output_rollback has been introduced to revert the pending state.
Because the output backend API is mostly state-less, the only thing
wlr_output_impl.rollback needs to do is revert the current rendering
context. Rename the function to rollback_render to make this clear. Add
a check in the common wlr_output code to only call rollback_render when
attach_buffer has been previously called.
On the long term, we'll be able to remove attach_render and
rollback_render together.
This is necessary for some grabs, which currently have no way of knowing
when the pointer/keyboard focus has left a surface. For example, without
this, a drag-and-drop grab can erroneously drop into a window that the
cursor is no longer over.
This is the plumbing needed to properly fix swaywm/sway#5220. The
existing fix, swaywm/sway#5222, relies on every grab's `enter()` hook
allowing a `NULL` surface. This is not guaranteed by the API and, in
fact, is not the case for the xdg-shell popup grab and results in a
crash when the cursor leaves a surface and does not immediately enter
another one while a popup is open (#2161).
This fix also adds an assertion to wlr_seat_pointer_notify_enter() that
ensures it's never called with a `NULL` surface. This will make Sway
crash much more until it fixes its usage of the API, so we should land
this at the same time as a fix in Sway (which I haven't posted yet).
I found the previous wording a bit confusing when I first read it.
Reword these comments to explicitly say that the grab-respecting
variants should be used in most cases.
This change has no functional effect.
These three APIs are very similar to one another, but they all had
slightly different function orderings. For consistency, always declare
the non_`notify` functions first, then the `notify` functions, then
`{start,end,has}_grab`.
This change has no functional effect.
This introduces the enter and leave events for wlr_keyboard_group.
The enter event is emitted when a keyboard is added to the group while a
key is pressed that is not pressed by any other keyboard in the group.
The data is a wl_array of the pressed key codes unique to the keyboard
that should now be considered pressed.
Similarly the leave event is emitted when a keyboard is removed from the
group while at least one key is pressed that is not pressed by any other
keyboard in the group. The data is a wl_array of the pressed key codes
unique to the keyboard that should now be considered released.
The purpose of these events are to allow the compositor to update its
state to avoid corruption. Additionally, for the leave event, the
focused surface may have been notified of a key press for some or all of
the key codes and needs to be notified of a key release to avoid state
corruption.
These were previously emitted as normal key events, but they are not
normal key events. There is no actual key press or release associated
with the events. It's purely for state keeping purposes. Emitting them
as separate events allows the compositor to handle them differently.
Since these are purely for state keeping purposes and are not associated
with an actual key being pressed or released, bindings should not be
triggered as a result of these events.
We should throw a protocol error if the relevant capability has never
existed when get_(pointer|keyboard|touch) is called. Otherwise, it
should succeed, even if the capability is not currently present.
This follows the spec, and avoids possible races with the client when
capabilities are lost.
Closes: https://github.com/swaywm/wlroots/issues/2227
This function can be called after wlr_egl_make_current to cleanup the
EGL context. This avoids having lingering EGL contexts that make things
work by chance.
Closes: https://github.com/swaywm/wlroots/issues/2197
This is currently inconsistent with the rest of the library and a bit of
a footgun for new compositors. However, this breaks the API in a very
unfortunate way for existing compositors.
This is necessary so that sway can determine when to start emulating
pointer events -- it shouldn't start doing so during an implicit grab,
even if the pen is over a surface that doesn't bind tablet input.
Refs swaywm/sway#5302.
This patch will make the EGL renderer work on any EGL/GLESv2 driver
providing the EGL_WL_bind_wayland_display extensions.
Mesa used to declare provisional EGL_WL_bind_wayland_display directly
in <EGL/eglext.h>. Then, all unofficial extensions were moved to
<EGL/eglmesaext.h>, to have a cleaner implementation. See:
ab7bb10a2a
The extension was then approved at Khronos Group, and reached the
official <EGL/eglext.h>. See:
https://www.khronos.org/registry/EGL/extensions/WL/EGL_WL_bind_wayland_display.txtaa9b63f3ab
In order to make sure the renderer will work on any version of any
implementation providing the extension, only include the mesa-specific
header if it's present.
Signed-off-by: Julien Olivain <juju@cotds.org>
Instead of requiring compositors to call wlr_texture_get_size each time
they want to access the texture's size, expose this information as
wlr_texture fields.
Most of the pending output state is not forwarded to the backend prior
to an output commit. For instance, wlr_output_set_mode just stashes the
mode without calling any wlr_output_impl function.
wlr_output_impl.commit is responsible for applying the pending mode.
However, there are exceptions to this rule. The first one is
wlr_output_attach_render. It won't go away before renderer v6 is
complete, because it needs to set the current EGL surface.
The second one is wlr_output_attach_buffer.
wlr_output_impl.attach_buffer is removed in [1].
When wlr_output_rollback is called, all pending state is supposed to be
cleared. This works for all the state except the two exceptions
mentionned above. To fix this, introduce wlr_output_impl.rollback.
Right now, the backend resets the current EGL surface. This prevents GL
commands from affecting the output after wlr_output_rollback.
This patch is required for FBO-based outputs to work properly. The
compositor might be using FBOs for its own purposes [2], having leftover
FBO state can have bad consequences.
[1]: https://github.com/swaywm/wlroots/pull/2097
[2]: https://github.com/swaywm/wlroots/pull/2063#issuecomment-597614312
Check that buffer can be scanned out in wlr_output_test instead of
wlr_output_attach_buffer. This allows the backend to have access to the
whole pending state when performing the check.
This brings the wlr_output API more in line with the KMS API.
This removes the need for wlr_output_attach_buffer to return a value,
and for wlr_output_impl.attach_buffer.
Consumers call wlr_buffer_lock. Once all consumers are done with the
buffer, only the producer should have a reference to the buffer. In this
case, we can release the buffer (and let the producer re-use it).
This makes it easier for the user of this library to properly handle
failure of this function.
The signature of wlr_renderer_impl.init_wl_display was also modified to
allow for proper error propagation.
This patch disambiguates the needs_frame event by uncoupling it from
damage. A new separate damage event is emitted when the backend damages
the output (this happens e.g. VT is changed or software cursors are
used). The event specifies the damaged region.
The wlr_output.damage field is removed. wlr_output is no longer
responsible for tracking its own damage, this is wlr_output_damage's
job.
This is a breaking change, but wlr_output_damage users shouldn't need an
update.
Bugs fixed:
- Screen flashes on VT switch
- Cursor damage issues on the X11 and headless backends
Closes: https://github.com/swaywm/sway/issues/5086
Split out the client/resource handling out of wlr_buffer by introducing
wlr_client_buffer. Make wlr_buffer an interface so that compositors can
create their own wlr_buffers (e.g. backed by GBM, like glider [1]).
[1]: c66847dd1c/include/gbm_allocator.h (L7)
This function allowed backends to provide a custom function for frame
scheduling. Before resuming the rendering loop, the DRM and Wayland
backends would wait for vsync.
There isn't a clear benefit of doing this. The only upside is that we
get more stable timings: the delay between two repaints doesn't change too
much and is close to a mutliple of the refresh rate.
However this introduces latency, especially when a client misses a
frame. For instance a fullscreen game missing vblank will need to wait
more than a whole frame before being able to display new content. This
worst case scenario happens as follows:
- Client is still rendering its frame and cannot submit it in time
- Deadline is reached
- Compositor decides to stop the rendering loop since nothing changed on
screen
- Client finally manages to render its frame, submits it
- Compositor calls wlr_output_schedule_frame
- DRM backend waits for next vblank
- The wlr_output frame event is fired, compositor draws new content on screen
- On the second next vblank, the new content reaches the screen
With this patch, the wlr_output frame event is fired immediately when
the client submits its late frame.
This change also makes it easier to support variable refresh rate, since
VRR is all about being able to present too-late frames earlier.
References: https://github.com/swaywm/wlroots/issues/1925
The keyboard shortcuts inhibitor protocol is useful for remote desktop
and virtualization software in order to request all keyboard events to
be passed to it and (almost) none being resonded to by the compositor.
This allows the session at the other end of the remote desktop
connection or inside the virtual machine to be interacted with as usual
(e.g. Alt+Tab to switch windows on the remote system instead of
locally).
Add the wayland protocol to the meson build files.
Copy'n'search'n'replace the very similar idle inhibit protocol
implementation. This already provides all the basic functionality:
- creating and destroying inhibitors upon request by a client,
- destruction in reaction to destruction of surfaces or displays,
- a list of inhibitors to search through for existing ones as well as
- a signal to be sent to the compositor upon registration of a new
inhibitor.
Beyond that we add the active and inactive events to be sent to the
client and wire those to activate and deactivate functions for the
compositor to call in confirmation of activation of a new inhibitor or
(un-)suspending of an existing inhibitor e.g. in response to a special
key combination entered by the user as suggested by the protocol.
As mandated by the protocol, we check the existance of an inhibitor for
a given surface and seat upon creation and return the error provided by
the protocol for that purpose.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Closes: https://github.com/swaywm/wlroots/issues/1817
Previously, if the current configuration contains an output X which is
destroyed, its head is automatically removed. If the compositor submits
the new configuration after X was removed, the current output
configuration is incorrectly detected to be the same as the previous
one, and no done event is sent. To prevent this, we can just keep track
of whether the current configuration is dirty, i.e whether we have sent
a done event for it.
Add a wlr_renderer.rendering bool, set it to true between
wlr_renderer_begin() and wlr_renderer_end(). Assert we're rendering when
calling functions that render.
Since [1], the xdg-output description is mutable. Listen to output
description changes and send the new output description when updated.
[1]: 048102f21a
wlr_output.description is a string containing a human-readable string
identifying the output. Compositors can customise it via
wlr_output_set_description, for instance to make the name more
user-friendly.
References: https://github.com/swaywm/wlroots/issues/1623
Bumps minimum version to 0.51.0
- Remove all intermediate static libraries.
They serve no purpose and are just add a bunch of boilerplate for
managing dependencies and options. It's now managed as a list of
files which are compiled into libwlroots directly.
- Use install_subdir instead of installing headers individually.
I've changed my mind since I did that. Listing them out is annoying as
hell, and it's easy to forget to do it.
- Add not_found_message for all of our optional dependencies that have a
meson option. It gives some hints about what option to pass and what
the optional dependency is for.
- Move all backend subdirectories into their own meson.build. This
keeps some of the backend-specific build logic (especially rdp and
session) more neatly separated off.
- Don't overlink example clients with code they're not using.
This was done by merging the protocol dictionaries and setting some
variables containing the code and client header file.
Example clients now explicitly mention what extension protocols they
want to link to.
- Split compositor example logic from client example logic.
- Minor formatting changes
Remove glapi.sh code generation, replace it with hand-written loading
code that checks extension strings before calling eglGetProcAddress.
The GLES2 renderer still uses global state because of:
- {PUSH,POP}_GLES2_DEBUG macros
- wlr_gles2_texture_from_* taking a wlr_egl instead of the renderer
Some globals are static and it doesn't make sense to destroy them before
the wl_display. For instance, wl_compositor should be created before the
display is started and shouldn't be destroyed.
For these globals, we can simplify the code by removing the destructor
and stop keeping track of wl_resources (these will be destroyed with the
wl_display by libwayland).
Most of the time, compositors just display the surface's current buffer
on an output. Add an helper to make it easy to support presentation-time
in this case.
The wlr_presentation_feedback struct now tracks presentation feedback
for multiple resources (but still a single surface content update). This
allows the compositor to properly send presentation events even when
there is more than one frame of latency or when it references a
surface's buffer.
This is set to the value of wlr_output.commit_seq when the frame has
been submitted. This allows tracking presentation with more then 1 full
frame of latency.
References: https://github.com/swaywm/wlroots/issues/1917
Expose the remote wl_display, wl_surface and wl_seat used by the Wayland
backend.
This allows compositors to customize the Wayland backend and to have
more freedom. For instance a compositor might want to handle clipboard
and drag-and-drop from the remote Wayland compositor. Another compositor
might want to setup pointer constraints.
Prior to this commit, compositors needed to render the texture to an
intermediate off-screen buffer using wlr_renderer APIs if they wanted to
use a custom rendering path (e.g. render to a 3D scene).
A new wlr_gles2_texture_get_attribs exposes the GL texture target and ID
so that compositors can render wlr_textures with their own shaders. An
example of a compositor doing so is available at [1].
[1]: 3db905b784/src/render.c (L227)
A wlr_keyboard_group allows for multiple keyboard devices to be
combined into one logical keyboard. Each keyboard device can only be
added to one keyboard group. This helps with the situation where one
physical keyboard is exposed as multiple keyboard devices. It is up to
the compositors on how they group keyboards together, if at all.
Since a wlr_keyboard_group is one logical keyboard, the keys are a set.
This means that if a key is pressed on multiple keyboard devices, the
key event will only be emitted once, but the internal state will count
the number of devices that the key is pressed on. Likewise, the key
release will not be emitted until the key is released from all devices.
If the compositor wants access to which keys are pressed and released
on each keyboard device, the events for those devices can be listened
to, as they currently are, in addition to the group keyboard's events.
Also, all keyboard devices in the group must share the same keymap. If
the keymap's differ, the keyboard device will not be able to be added
to the group. Once in the group, if the keymap or effective layout for
one keyboard device changes, it will be synced to all keyboard devices
in the group. The repeat info and keyboard modifiers are also synced
Without this information, compositors have no way to tell whether
or not to consider the position information valid. Most notably,
a compositor needs to know if it should pick a position for the
surface or use the position sent in the configure request.
Since e26217c51e3a5e1d7dfc95a8a76299e056497981, touchpoints can outlive
surfaces. This works fine as long as the client stays around, but fails
horribly otherwise; therefore we have to make sure that touchpoints don't
outlive their clients.
Fixes#1788
From the xdg-shell specification:
If the parent is unmapped then its children are managed as
though the parent of the now-unmapped parent has become the
parent of this surface. If no parent exists for the now-unmapped
parent then the children are managed as though they have no
parent surface.
This commit makes more output properties (mode, enabled, scale and transform)
atomic. This means that they are double-buffered and only applied on commit.
Compositors now need to call wlr_output_commit after setting any of those
properties.
Internally, backends still apply properties sequentially. The behaviour should
be exactly the same as before. Future commits will update some backends to take
advantage of the atomic interface. Some backends are non-atomic by design, e.g.
the X11 backend or the legacy DRM backend.
Updates: https://github.com/swaywm/wlroots/issues/1640
This prevents screencopy applications from hanging because a failed
event never got sent when the output was disconnected or disabled after
the call to buffer().
The documentation for wayland-server.h says:
> Use of this header file is discouraged. Prefer including
> wayland-server-core.h instead, which does not include the server protocol
> header and as such only defines the library PI, excluding the deprecated API
> below.
Replacing wayland-server.h with wayland-server-core.h allows us to drop the
WL_HIDE_DEPRECATED declaration.
AFAIK this was always set to zero. Instead, compute wl_output mode flags on the
fly.
Technically this is a breaking change, but I don't think anybody uses this
field.
This commit matches sway's 2dc4978d8af326c310057ca8fd22a4c7f5d09335.
To help ensure a reproducible build (when debug info is disabled),
the meson build script now uses the -fmacro-prefix-map command line
argument supported by GCC to strip the build-path dependent bytes
of each __FILE__ string used by wlr_log and related functions.
A rather ugly algorithm is used to compute the relative path between
the build and source folders, because meson has no specific function
for this.
When the compiler does not support -fmacro-prefix-map, fall back
to shifting the start of each __FILE__ string by the length of the
relative path to the source directory.
This change tracks, for each wlr_seat_client, the most recent serial
numbers which were sent to the client. When the client makes a
selection request, wlroots now verifies that the serial number
associated with the selection request was actually provided to that
specific client. This ensures that the client that was most
recently interacted with always has priority for its copy selection
requests, and that no other clients can incorrectly use a larger serial
value and "steal" the role of having the copy selection.
Also, the code used to determine when a given selection is superseded
by a newer request uses < instead of <= to allow clients to make
multiple selection requests with the same serial number and have the
last one hold.
To limit memory use, a ring buffer is used to store runs of sequential
serial numbers, and all serial numbers earlier than the start of the
ring buffer are assumed to be valid. Faking very old serials is
unlikely to be disruptive.
Assuming all clients are correctly written, the only additional
constraint which this patch should impose is that serial numbers
are now bound to seats: clients may not receive a serial number
from an input event on one seat and then use that to request
copy-selection on another seat.
The backend doesn't need to handle transform changes, since everything is done
in software. In fact, all of the implementations were all identical and just
set the transform.
We could add support for hardware transforms, but:
- This would require a different field (something like hardware_transform)
- Not all combinations are possible because there often are hardware
limitations
- The Wayland protocol isn't ready for this (in particular xdg-output, see [1])
This belongs to a different patch series anyway.
[1]: https://patchwork.freedesktop.org/series/52324/
In addition to `button_count`, we keep track of the current buttons
pressed just as in `wlr_keyboard`.
Add `set_add` and `set_remove` to assist with this. These functions can
only be used with values greater than 0 (such as the button/key masks
for keyboards and pointers).
Partially addresses:
- https://github.com/swaywm/wlroots/issues/1716
- https://github.com/swaywm/wlroots/issues/1593
This commit introduces wlr_output_schedule_done and refactors the mechanism
used to send wl_output events to clients.
wlr_output_schedule_done schedules a wl_output.done event. This allows clients
to see wlr_output property changes as atomic.
This function is also useful for add-on interfaces like xdg_output which need
to trigger a wl_output.done event to apply their new state.
wlr_output_damage_make_current has been renamed to
wlr_output_damage_attach_render, since it's just a wrapper for
wlr_output_attach_render.
wlr_output_damage_swap_buffers has been removed completely. Instead,
wlr_output_damage now listens to successful wlr_output commits and updates its
internal state accordingly.
This updates the backend part of the output API. This is mostly renaming:
make_current becomes attach_render and swap_buffers becomes commit.
This also fixes the RDP backend to support NULL damage.
This is necessary for direct scan-out and other upcoming features. This patch
changes the output API to look like the wl_surface API.
Outputs now have some double-buffered state: the frame to be submitted
(currently only wlr_renderer frames are supported) and the damaged region.
To attach a pending frame, use wlr_output_attach_render. To set the pending
damaged region, use wlr_output_set_damage.
To submit the pending state, call wlr_output_commit. This will submit the
pending frame to the backend.
To migrate from the old API to the new one:
- Replace wlr_output_make_current calls by wlr_output_attach_render
- Replace wlr_output_swap_buffers calls by wlr_output_set_damage and
wlr_output_commit
* idle: enable the compositors to add custom idle timeouts
* idle: add a private constructor which also creates the resource
* idle: move resource creation to the idle implementation callback
This types adds a container for formats + modifiers.
A list that is of [format [modifier]] was chosen instead of
[format modifer] because that is how GBM accepts them.
Co-Authored-By: emersion <contact@emersion.fr>
Since the fullscreen request may be made before the toplevel's surface
is mapped, the requested fullscreen output needs to be stored so it
can be retrieved on map (along with the existing fullscreen property).
This commit makes the required changes for wlr_xdg_toplevel_v6.
Since the fullscreen request may be made before the toplevel's surface
is mapped, the requested fullscreen output needs to be stored so it
can be retrieved on map (along with the existing fullscreen property).
This commit makes the required changes for wlr_xdg_toplevel.
* wlr_output: Indicate modes link
* wlr_output: Introduce preferred flag
This indicates an outputs preferred mode.
* drm: Set preferred flag for an outputs preferred mode
data-control: separate out a data_offer struct
This is a prerequisite to adding primary selection support.
data-control: separate out data_control_source
This is a prerequisite to adding primary selection support, since that
doesn't use wlr_data_source, but rather wlr_primary_selection_source.
Update the data-control protocol
data-control: add primary selection support
Merge create_offer and create_primary_offer
Extract code into data_control_source_destroy()
Fix pointer style
Move resource neutralization to destructor
Store wl_resource in the data_offer
Extract data_offer destruction into a function
Frame events group logically connected pointer events. It makes sense to make
the backend responsible for sending frame events, since once the events are
split (ie. once the frame events are stripped) it's not easy to figure out
which events belongs to which frame again.
This is also how Weston handles frame events.
Fixes https://github.com/swaywm/wlroots/issues/1468
This makes compositors able to block and/or customize set_selection requests
coming from clients. For instance, it's possible for a compositor to disable
rich selection content (by removing all MIME types except text/plain). This
commit implements the design proposed in [1].
Two new events are added to wlr_seat: request_set_selection and
request_set_primary_selection. Compositors need to listen to these events and
either destroy the source or effectively set the selection.
Fixes https://github.com/swaywm/wlroots/issues/1138
[1]: https://github.com/swaywm/wlroots/issues/1367#issuecomment-442403454
The noop backend is similar to headless, but it doesn't contain a
renderer. It can be used as a place to stash views for when there's no
physical outputs connected.
In particular, modified public creator and destructor function names,
added a display destroy listener, safely extract user data from
resources, send correct time (in usecs) in rootston, etc.
This is a common interface that can be used for all primary selection
protocols, as discussed in [1]. A new function wlr_seat_set_primary_selection
is added to set the primary selection for all protocols.
The seat now owns again the source, and resets the selection to NULL when
destroyed.
[1]: https://github.com/swaywm/wlroots/issues/1367#issuecomment-442403454
This commits completely refactors wlr_gtk_primary_selection. The goal is to
remove gtk-primary-selection state from the seat and better handle inert
resources where it makes sense.
wlr_seat_client.primary_selection_devices has been removed and replaced by
wlr_gtk_primary_selection_device. This allows us to make offers inert when the
current selection is replaced.
wlr_seat_set_primary_selection has been removed because it relied on wlr_seat
instead of wlr_gtk_primary_selection_device_manager. A new function,
wlr_gtk_primary_selection_device_manager_set_selection (candidate for the
longest function name in wlroots) has been added. It doesn't take a serial
anymore as serial checking only makes sense for set_selection requests coming
from Wayland clients (serial checking is now done in the Wayland interface
implementation).
Since wlr_gtk_primary_selection_device_manager is now required to set the
selection, a new function wlr_xwayland_set_gtk_primary_selection_device_manager
(candidate number two for longest function name) has been added.
Devices are now made inert when the seat goes away.
Future work includes removing the last primary selection bits from the seat,
mainly wlr_seat.primary_selection_source and wlr_seat.events.primary_selection,
replacing those with new fields in wlr_gtk_primary_selection_device. Or maybe
we could keep those in the seat and replace them with a re-usable interface
(for future zwp_primary_selection_v1 support). We need to think how we'll sync
these three protocols (GTK, X11 and wayland-protocols).
See https://github.com/swaywm/wlroots/issues/1388
wlr_subsurface_from_wlr_surface can return NULL if the wl_surface is still
alive and if the wl_subsurface has been destroyed. Make sure we check for NULL.
Fixes https://github.com/swaywm/sway/issues/3195
This commit makes it possible for a single client to have multiple data devices
for the same seat. This fixes issues with Firefox.
This mainly removes wlr_data_source.offer. We make sure we create one data
offer per device. We now make the offer inert when the source is destroyed.
Fixes the second half of https://github.com/swaywm/wlroots/issues/1041
The read format is dependent on the output, so we first need to make it
current. This fixes a race condition in wlr-screencopy-v1 where a dmabuf
client would cause EGL_NO_SURFACE to be bound at the time when
screencopy needs to query for the preferred format, causing GL errors.
When a client was creating multiple data devices for the same seat, we were
only creating one resource. This is a protocol error.
Instead, create one offer per data device.
This commit also makes offers inert when their source is destroyed.
Fixes part of https://github.com/swaywm/wlroots/issues/1041
Supersedes https://github.com/swaywm/wlroots/pull/1113
We were assuming GL_BGRA_EXT was always supported.
We now check that it's supported for rendering. We fail if it isn't because
this format is specified as "always supported" by the Wayland protocol.
We also check if it's supported for reading pixels. A new preferred_read_format
function returns the preferred format that can be used to read pixels. This is
used by the screencopy protocol.
There was a missing copy_drm_surface_mgpu call in drm_connector_schedule_frame
so we asked for a pageflip with an unknown BO, resulting in ENOENT.
Additionally, this commit makes schedule_frame return a bool indicating
failures. This allows schedule_frame_handle_idle_timer to only set
frame_pending to true if a frame has been successfully scheduled. Thus, if a
pageflip fails, rendering won't be blocked forever anymore.
In case a pageflip is already pending, true is returned because a frame has
already been scheduled and will be sent sometime soon.
If a client uses an older version of the dmabuf protocol, use the
`formats` event instead of `modifiers` (since that didn't exist in older
versions).
With a bit of necessary guessing, support dmabuf importing even when
EGL_EXT_image_dma_buf_import_modifiers isn't present instead of
failing up front.
Since the source doesn't always come from a client, this field
doesn't make sense. It is replaced by a new "finalized" field in
wlr_client_data_source. This is used to make sure set_actions is
not sent after start_drag has been sent.
A check in data_offer_choose_action has been removed: if an offer
has been sent then start_drag has been called, no need to check.
I also wanted to add a check for wl_data_source.offer, but it
turns out (1) this isn't in the spec (2) it breaks GTK+.
This is some preliminary work for Firefox on Wayland compatibility.
This desynchronizes our rendering loop with the vblank cycle.
In case a compositor doesn't swap buffers but schedules a frame,
emitting a frame event immediately enters a busy-loop.
Instead, ask the backend to send a frame when appropriate. On
Wayland we can just register a frame callback on our surface. On
DRM we can do a no-op pageflip.
Fixes#617Fixesswaywm/sway#2748
This calculates and returns the effective damage of the surface in
surface coordinates, including the client damage (in buffer
coordinates), and damage induced by resize or move events.
* Rename the constraint_create signal to new_constraint for
consistency
* Move the constraint_destroy signal to the constraint itself
* Use rotate_child_position instead of duplicating logic
* Fix inert constraint resource handling
* Style fixes
Sessions can now be retrieved from a backend in a more general manner.
Multi-backend gets back its `session` field that contains the session
if one was created, removing the interfacing from multi backend with the
drm backend directly. This adds the possibility to use sessions even
without the drm backend.
It additionally fixes the bug that 2 session objects got created when
WLR_BACKENDS were set to "libinput,drm".
To allow vt switching without drm backend (and drm fd) on logind, start
listening to PropertiesChanged signals from dbus and parse the session
"Active" property when no master fd was created (this does not change
current drm backend behaviour in any way).
To prevent wl_keyboard keymap being written to by clients, use a unique
file descriptor for each wl_keyboard resource.
Reference: weston, commit 76829fc4eaea329d2a525c3978271e13bd76c078
sx, sy used to store the buffer offset of the drag surface which was
then be added (by rootston) to the drag icon position.
Buffer offsets are handled already in surface_intersect_output
(output.c) so they were added twice for dnd surfaces.
This is so we can potentially add comments to it, and so if a user looks
at the installed header, they can see the /* #undef WLR_HAS_FEATURE */
line to see every option, even if not available.
Implement the tablet-v2 tablet tool's implicit grab semantics for
buttons and tip.
This avoids losing focus (to other [sub]surfaces) when a button is held,
or the tip is down.
This should help when the device is used close to a surface's border and
would otherwise have to be very precise.
This introduces -DWLR_USE_UNSTABLE and adds information regarding the
stability status to all headers. I started with a conservative set of
headers to mark as stable:
- types/wlr_matrix.h
- util/edges.h
- util/log.h
- util/region.h
- xcursor.h
153f37bdf5 (#1145) removed the
wlr_xwayland_is_unamanged function while fixing OR, because it was
belieived that it's supposed to work around the broken OR handling.
This was a misunderstanding. is_unmanaged is (while sort of a hack)
intended to work around inherent differences between "real" X sessions
and our Xwayland/wayland situation.
The main reason it exists is to support applications like rofi and dzen,
while not handing focus to other OR windows (which should *not* be
required).
Traditionally, these applications just grabbed input from X and didn't
need to be focused by any logic in the WM. Which of course doesn't work
in wayland compositors. So we have to give them focus in some way.
Giving *every* OR window focus, breaks other applications that don't
expect focus to change.
A testcase that was pointed out to me where wlr_xwayland_is_unamanged was
breaking things is https://github.com/swaywm/sway/issues/2128 (syncplay,
gitk, gitgui)
Supposedly it broke using keyboard to navigate the menus.
I can't reproduce this with this patch. The popups can be navigated as
long as the parent has focus.
Implement the basic logic for tablet-v2 tablet_pad's grabs. And plug in
the default grab.
Features like "holding" the focus should be implemented via grabs, like
they are for pointer and keyboard.
The override_redirect flag can change on configure notify and
on map notify. This adds an event to know when it changes.
This removes wlr_xwayland_surface_is_unmanaged which was wrongly
using the window type to decide whether the view should be
unmanaged.
A similar patch was proposed to Weston, but has never been
merged upstream [1].
[1]: https://patchwork.freedesktop.org/patch/211161/
There were a few issues after rebase, that the merge algorithm didn't
throw at my face:
wlr_output did a check on the actual role, not a string anymore, so that
had to go to allow tablet-v2 to set cursor surfaces.
A few L_DEBUG/L_ERRORs were still around
There was a user-after-free in tablet-group free()ing, probably after
insufficient testing from a previous feedback pass
The previous naming was based on the input-device capability names from
libinput.
With code that uses the libinput_tablet_tool and mapping into tablet-v2,
this is confusing, so the name is changed to follow the names used in
the protocol.
This adds the management code to manage tablet tools lifetimes from
libinput.
It follows the suggestion made in the tablet-unstable-v2.xml to destroy
tablet_tools once all tablets that it got into contact with were removed
from the system. This is implemented via a refcount.
If a tool is *not* unique, it will be destroyed on proximity out. This
is libinput specific and mentioned in libinput docs that tools will not
be found again, so we shouldn't keep a reference to them.
Also they can't be on other tablets as well, because they cannot be
tracked.
The naming in this commit is a bit off (to not break things).
The wlr names stay the same, tablet_tool is the libinput_device with
capaiblity LIBINPUT_DEVICE_CAP_TABLET_TOOL which is more akin to
"tablet" in the tablet-unstable-v2 protocol.
The struct that corresponds to the tablet_tool in tablet-unstable-v2 is
called tablet_tool_tool, a rename should be done at some point in the
future.
To begin with, no-op updates are unnecessary, so this patch is an
improvement on its own.
Then, this fixes hotplugging issues with xwayland. xwayland waits
for both wl_output and xdg_output to send a "done" event. However,
it doesn't handle well desynchronized "done" updates: if xdg-output
sends "done" twice, the second one will wait for the next wl_output
"done" event. This is an issue when the first is a no-op and the
second is a real update: the second isn't applied. I've considered
patching xwayland instead, but it seems pretty complicated.
It is common to want to iterate an xdg-surface's popups separately from
the toplevel and subsurfaces. For example, popups are typically rendered
on top of most other surfaces.
wlr_xdg_surface_for_each_surface continues to iterate both surfaces and
popups to maintain backwards compatibility.
There was no way to tell wlr_idle to stop processing input events
and rearm timers all the time, such an API is required to have
some form of idle inhibitor.
Detecting whether eglSwapBuffersWithDamageEXT or
eglSwapBuffersWithDamageKHR is used should be based on the extension
string, not only on the availability of the function.
This lets clients bind to a seat multiple times by re-using the existing
wlr_seat_client whenever a duplicate request happens.
Previously, an independant wlr_seat_client would be created and only
events from one would be processed.
Fixes#1023.
Compositors now have more control over how the backend creates its
renderer. Currently all backends create an EGL/GLES2 renderer, so
the necessary attributes for creating the context are passed to a
user-provided callback function. It is responsible for initializing
provided wlr_egl and to return a renderer. On fail, return 0.
Fixes#987
Makes the xwayland startup process two phased.
The first phase just initialises the X11 sockets.
The second phase starts the Xwayland server itself.
When starting xwayland lazily the second phase will be postponed until
a client has connected to the X11 socket.
Changes in behaviour:
The DISPLAY environment is now set immediately after the X11 sockets
are created.
When the Xwayland server is killed or crashes, the sockets will not be
recreated, but reused.
Fixes#849: Start up Xwayland lazily
This changes the `wlr_output_impl.set_cursor` function to take a
`wlr_texture` instead of a byte buffer. This simplifies the
DRM and Wayland backends since they were creating textures from
the byte buffer anyway.
With this commit, performance should be improved when moving the
cursor since outputs don't need to be re-rendered anymore.
All public resource creators now take a new ID for the resource
and an optional list where the resource link is added. When the
resource is destroyed it is its own responsibility to remove
itself from the list. This removes the need for the caller to add
a destroy listener.
This commit fixes a few segfaults with resources not removed from
the list when destroyed.
Simon Ser
Andri Yngvason
Thomas Hebb
Brian Ashworth
Kenny Levinsen
Isaac Freund
Tudor Brindus
Julien Olivain
David96
Tudor Roman
Michael Weiser
Guido Günther
Dorota Czaplejewicz
Ilia Bozhinov
Drew DeVault
Josef Gajdusek
Scott Anderson
Jason
Timidger
Ivan Molodetskikh
Danilo Spinella
Scott Moreau
Markus Ongyerth
Sebastian Krzyszkowiak
Sebastian Krzyszkowiak
Rouven Czerwinski
Jason Francis
Manuel Stoeckl
Ashkan Kiani
Scott Anderson
Ryan Walklin
Geoff Greer
Greg V
Jente Hidskes
Ryan Dwyer
Connor E
Alex Maese
random human
Duncaen
Cedric Sodhi
sghctoma
nyorain
Aidan Epstein
Las
Alexander Bakker
Brian Ashworth
Armin Preiml
Dominique Martinet
Vincent Vanlaer
Tony Crisci
morganamilo