This new functions cleans up the common backend state. While this
currently only emits the destroy signal, this will also clean up
the renderer and allocator in upcoming patches.
Make it so wlr_gles2_texture is ref'counted (via wlr_buffer). This
is similar to wlr_gles2_buffer or wlr_drm_fb work.
When creating a wlr_texture from a wlr_buffer, first check if we
already have a texture for the buffer. If so, increase the
wlr_buffer ref'count and make sure any changes made by an external
process are made visible (by invalidating the texture).
When destroying a wlr_texture created from a wlr_buffer, decrease
the ref'count, but keep the wlr_texture around in case the caller
uses it again. When the wlr_buffer is destroyed, cleanup the
wlr_texture.
This adds a a function to create a wlr_texture from a wlr_buffer.
The main motivation for this is to allow the renderer to create a
single wlr_texture per wlr_buffer. This can avoid needless imports
by re-using existing textures.
Backend-initiated mode changes can use this function instead of
going through drm_connector_set_mode. drm_connector_set_mode becomes
a mere drm_connector_commit_state helper.
Replace it with a new drm_connector_state_is_modeset function that
decides whether a modeset is necessary directly from the
wlr_output_state which is going to be applied.
Stop assuming that the state to be applied is in output->pending in
crtc_commit. This will allow us to remove ephemeral fields in
wlr_drm_crtc, which are used scratch fields to stash temporary
per-commit data.
This function is only required because the DRM backend still needs
to perform multi-GPU magic under-the-hood. Remove the wlr_ prefix
to make it clear it's not a candidate for being made public.
`_NET_WM_PID` is unreliable: it is optional and even if set it may
contain PIDs from sandbox namespaces or remote systems.
Prefer XRes v1.2 QueryClientIds method which returns PIDs as seen by the
Xwayland server.
Previously, the same struct was used for linux-dmabuf-v1 params
and buffer. This made the whole logic a little bit awkward, because
a wlr_dmabuf_v1_buffer could either be still being constructed, or
be a complete buffer.
Introduce a separate wlr_linux_buffer_params_v1 struct for buffer
params still being constructed. Once the params are complete (ie.
once the create request is sent), the params struct is destroyed
and the buffer struct is created.
This will help with [1] as well.
[1]: https://github.com/swaywm/wlroots/issues/2664
Drop wlr_dmabuf_v1_buffer_from_params_resource and
wlr_linux_dmabuf_v1_from_resource. Contrary to wl_buffer, these
resources are internal linux-dmabuf-v1 implementation details and
should not be shared with other interfaces.
It allocates in local main memory via shm_open, and provides a FD
to allow sharing with other processes.
This is suitable for software rendering under the Wayland and X11
backends.
libseat provides all session functionality, so there is no longer need
for a session backend abstraction. The libseat device ID, seat handle
and event loop handle are moved to the main wlr_session and wlr_device
structs.
The get_drm_fd was made available in an internal header with a53ab146f. Move it
now to the public header so consumers opting in to the unstable interfaces can
make use of it.
Use 128-bit hexadecimal string tokens generated with /dev/urandom
instead of UUIDs for xdg-foreign handles, removing the libuuid
dependency. Update readme and CI. Closes#2830.
build: remove xdg-foreign feature
With no external dependencies required, there's no reason not to always
build it. Remove WLR_HAS_XDG_FOREIGN as well.
wlroots' dependency on this library doesn't change the features
exposed to compositors. It's purely a wlroots implementation detail.
Thus downstream compositors shouldn't really care about it.
Introduce an "internal_features" dictionary to store the status of
such internal dependencies.
This fixes the following warning:
WARNING: Project targeting '>=0.56.0' but tried to use feature deprecated since '0.56.0': Dependency.get_pkgconfig_variable. use Dependency.get_variable(pkgconfig : ...) instead
To unify the code style of the project, absolute paths have been used in
some places, such as '#include "render/allocator.h"' in
"render/gbm_allocator.h". Except for include the wayland protocol
headers should be consistent.
This dependency is already required by many other widely used X11
programs, such as i3, Qt, and other XWMs. So it should be available
on most systems.
X11 support can be pretty broken without xcb-icccm, with focus issues
for instance. Let's just remove this --please-break-my-desktop footgun
option.
Compute only the transform matrix in the output. The projection matrix
will be calculated inside the gles2 renderer when we start rendering.
The goal is to help the pixman rendering process.
Instead of walking PATH like a previous proposal [1], this one
checks that the Xwayland path specified in the pkg-config file
exists.
I think this is a reasonable compromise:
- Users that don't have Xwayland installed system-wide won't get
a bogus DISPLAY env variable set up.
- Users that have WLR_XWAYLAND set won't be affected by this check.
- Users that have Xwayland installed system-wide and a different
Xwayland in their PATH still get their custom Xwayland.
- Users that don't have Xwayland installed system-wide but have it
somewhere else in PATH are left out. But this is pretty niche,
and they can just set WLR_XWAYLAND.
[1]: https://github.com/swaywm/wlroots/pull/2314
Previously, the clipboard and primary selections shared the same window.
This was racey, and could have led to pasting failures.
On xfixes selection owner change notification, the logic for requesting
the supported mimetypes of the new owner's selection looks like:
xcb_convert_selection(
xwm->xcb_conn,
selection->window,
selection->atom,
xwm->atoms[TARGETS],
xwm->atoms[WL_SELECTION],
selection->timestamp
);
This means ask the selection owner to write its TARGETS for the
`selection->atom` selection (one of PRIMARY, CLIPBOARD, DND_SELECTION)
to `selection->window`'s WL_SELECTION atom.
However, `selection->window` is shared for both PRIMARY and CLIPBOARD
selections, and WL_SELECTION is used as the target atom in both cases.
So, there's a race when both selections change at the same time.
The CLIPBOARD selection might support mimetypes {A, B, C}, and the
PRIMARY only {A, B}. If the ConvertSelection requests/responses "cross
on the wire", so to speak, wlroots can end up believing that the PRIMARY
selection also supports C.
A Wayland client may then ask for the PRIMARY selection in C format,
which will fail with "convert selection failed".
This commit fixes this by using a separate window for PRIMARY and
CLIPBOARD target requests, so that WL_SELECTION can be used as the
target atom in both cases.
This commit introduces logic for using a new X11 window for each
incoming transfer, rather than having a global window for each selection
source.
This eliminates a whole class of bugs involving multiple concurrent
incoming transfers.
For now, we retain the outgoing transfer queue, and the selection
source-specific windows to support it. Source-specific windows are no
longer used in the incoming path, and will be removed in a future PR.
Refs #1497.
Previously, Xwayland could restart, and we'd get events for transfers
pointing to the previous (now freed) xwm instance. This led to
use-after-free segfaults.
Closes#2565.
Apart from reducing duplication, this has the positive side-effect of
allowing all deallocs to use
`xwm_selection_transfer_destroy_property_reply`, as opposed to the
latter and a mix of ad-hoc `free`s.
Previously, wlr_xwm_selection_transfer.source_fd meant:
- the source of data in a Wayland -> X11 copy (good)
- the destination of data in a X11 -> Wayland copy (confusing)
This made reading through xwayland/selection/incoming.c difficult: in
many places, "source" actually means "destination".
When we receive an Expose event, that means that we must redraw that
region of the X11 window. Keep track of these regions with pixman
regions, and merge them with the additional output damaged regions.
Fixes#2670
In certain situations windows can have their input field set to false
but still expect to receive input focus by passively listening to key
presses via a parent window. The ICCCM specification outlines how focus
should be given to clients.
Further reading: https://tronche.com/gui/x/icccm/sec-4.html#s-4.1.7
Relates to #2604
This actually simplifies the logic since we no longer have to wait for
enter/leave events, and also improves the UX when e.g. handling a crash
with gdb attached.
See #2659
This allows a compositor to get a KMS connector object ID from a
wlr_output. The compositor can then query more information about
the connector via libdrm.
This gives more freedom to compositors and allows them to read
KMS properties that wlroots doesn't know about. For instance,
they could read the EDID or the suggested_{X,Y} properties and
change their output configuration based on that.
The subconnector property indicates the connector sub-type. This is
useful because that usually indicates what kind of connector the user
has plugged in to their monitor, e.g. a DisplayPort-to-DVI cable will
indicate a DVI subconnector. Also some laptops have non-DP connectors
that are internally linked to a DP port on the GPU.
Set the output description accordingly.
See https://drmdb.emersion.fr/properties/3233857728/subconnector
Value is now an enum with a new value ("on-demand") that compositors can use to allow "normal" keyboard focus semantics regardless of the layer the client surface is on. An error is sent for invalid keyboard interactivity values. The old behavior is retained for clients using the previous version of the protocol.
Also adjusted the layer-shell example program to use the new keyboard interactivity options.
This function is inferior to wlr_xdg_surface_for_each_popup_surface()
for rendering as it does not iterate over subsurfaces. Furthermore,
no compositor is known to use this to iterate popups for any purpose
other than rendering. Therefore remove the function, which may of course
be reintroduced at a later date if a use-case is found.
Stop keeping track of buffers on the parent GPU when multi-GPU is used.
This removes support for export_dmabuf on secondary GPUs, but renderer
v6 will bring this back by managing the swapchains in wlr_output instead
of the backends.
This function will allow compositors to implement input handling in a
way consistent with rendering more easily.
Calling wlr_layer_surface_v1_surface_at() and checking if the result is
a wlr_xdg_popup is flawed as there may be subsurfaces in the popup tree.
This function will allow compositors to implement input handling in a
way consistent with rendering more easily.
Calling wlr_xdg_surface_surface_at() and checking if the result is a
wlr_xdg_popup is flawed as there may be subsurfaces in the popup tree.
Simon Ser
Simon Zeni
Aleksei Bavshin
Tadeo Kondrak
ayaka
Kenny Levinsen
Roman Gilg
Ryan Farley
Benoit Gschwind
Isaac Freund
zccrs
Brandon Dowdy
Ilia Mirkin
Manuel Stoeckl
Tudor Brindus
BrassyPanache
Daniel Kondor