If we can't create the XKB keymap used for keysym translation,
gracefully error out instead of crashing. This can happen if the
XKB_DEFAULT_LAYOUT is set to an invalid value, for instance.
Closes: https://github.com/swaywm/sway/issues/7789
My code archaeology isn't good enough to determine what this is here
for, but it isn't correct. We should be able to move containers in a
direction without focusing them. AFAICT i3 doesn't do this, so we
shouldn't either.
This fixes ipc commands like move <dir> with criteria that apply to
containers which are not the current focus.
i3 has had this property for over a decade but it wasn't documented
until a couple of years ago, so it was likely missed when developing
sway. Add the property to get us closer to ipc parity with i3.
Check if the app that requested a token has provided a valid input
serial and a focused surface. Downgrade activation request to urgency
otherwise.
This is mostly in line with what other Wayland compositors decided to
do, and offers a better security than the original logic.
We tried to synchronize layer shell popups with the parent layer shell
on commits, but this is subtly wrong because we would only update
the position for one layer shell that was committed, but not any other
layer that might be affected. By moving handling to the scene descriptor
we can iterate all popups and ensure they are synchronized.
This doesn't catch the error if a background changing command is
executed via swaymsg, but improves logging.
The additional checks at least propagate if e.g. forking failed.
```
Program terminated with signal SIGSEGV, Segmentation fault.
144 struct wlr_layer_surface_v1 *layer_surface = surface->layer_surface;
[Current thread is 1 (Thread 0x7f1f7c5b3ac0 (LWP 2473))]
(gdb) bt
```
Add a NULL check in `find_mapped_layer_by_client` like the one in `arrange_surface`.
7e69a7076f ("Drop wl_drm") has dropped wl_drm, however a lot of
software wasn't quite ready for this (Xwayland, libva, amdvlk).
Keep wl_drm disabled by default to pressure the wl_drm phase-out,
but add a -Dlegacy-wl-drm flag for users to restore the previous
behavior in the meantime.
References: https://github.com/swaywm/sway/issues/7897
```
Program terminated with signal SIGSEGV, Segmentation fault.
warning: Section `.reg-xstate/3960717' in core file too small.
0 container_get_siblings (container=0x55bcde4797f0) at ../sway/tree/container.c:1228
1228 if (list_find(container->pending.workspace->tiling, container) != -1) {
[Current thread is 1 (Thread 0x7fa23b4a2940 (LWP 3960717))]
(gdb) bt full=
No symbol "full" in current context.
(gdb) bt full
0 container_get_siblings (container=0x55bcde4797f0) at ../sway/tree/container.c:1228
1 0x000055bcdb62c704 in edge_is_external (cont=0x55bcde4797f0, edge=(WLR_EDGE_TOP | WLR_EDGE_LEFT))
at ../sway/input/seatop_default.c:54
siblings = 0x55bcde4797f0
index = 32766
layout = L_NONE
__PRETTY_FUNCTION__ = "edge_is_external"
2 0x000055bcdb62c96f in find_resize_edge (cont=0x55bcde4797f0, surface=0x0, cursor=0x55bcddd5c2e0)
at ../sway/input/seatop_default.c:106
edge = (WLR_EDGE_TOP | WLR_EDGE_LEFT)
3 0x000055bcdb620b3c in cursor_update_image (cursor=0x55bcddd5c2e0, node=0x55bcde4797f0) at ../sway/input/cursor.c:144
edge = WLR_EDGE_NONE
4 0x000055bcdb62eb8f in handle_rebase (seat=0x55bcddd5a740, time_msec=488992944) at ../sway/input/seatop_default.c:773
e = 0x55bcddd5c8e0
cursor = 0x55bcddd5c2e0
surface = 0x0
sx = 0
sy = 0
5 0x000055bcdb62c531 in seatop_rebase (seat=0x55bcddd5a740, time_msec=488992944) at ../sway/input/seat.c:1585
6 0x000055bcdb620a7d in cursor_rebase (cursor=0x55bcddd5c2e0) at ../sway/input/cursor.c:126
time_msec = 488992944
7 0x000055bcdb620ac4 in cursor_rebase_all () at ../sway/input/cursor.c:136
seat = 0x55bcddd5a740
8 0x000055bcdb61cc95 in transaction_apply (transaction=0x55bcde5b28c0) at ../sway/desktop/transaction.c:704
9 0x000055bcdb61ccdb in transaction_progress () at ../sway/desktop/transaction.c:716
10 0x000055bcdb61d1f9 in transaction_commit_pending () at ../sway/desktop/transaction.c:836
transaction = 0x55bcde5b28c0
11 0x000055bcdb61d596 in _transaction_commit_dirty (server_request=true) at ../sway/desktop/transaction.c:912
12 0x000055bcdb61d5ac in transaction_commit_dirty () at ../sway/desktop/transaction.c:916
13 0x000055bcdb65f579 in view_unmap (view=0x55bcde2ff180) at ../sway/tree/view.c:847
parent = 0x55bcde489010
ws = 0x55bcdde19080
seat = 0x55bcddd5a198
14 0x000055bcdb61e461 in handle_unmap (listener=0x55bcde2ff368, data=0x0) at ../sway/desktop/xdg_shell.c:394
xdg_shell_view = 0x55bcde2ff180
view = 0x55bcde2ff180
__PRETTY_FUNCTION__ = "handle_unmap"
15 0x00007fa23c4ae87f in wlr_signal_emit_safe (signal=0x55bcde46cf38, data=0x0) at ../util/signal.c:29
pos = 0x55bcde2ff368
l = 0x55bcde2ff368
cursor = {link = {prev = 0x55bcde2ff368, next = 0x7ffe240702a0}, notify = 0x7fa23c4ae7c9 <handle_noop>}
end = {link = {prev = 0x7ffe24070280, next = 0x55bcde46cf38}, notify = 0x7fa23c4ae7c9 <handle_noop>}
16 0x00007fa23c47c3c7 in unmap_xdg_surface (surface=0x55bcde46ce30) at ../types/xdg_shell/wlr_xdg_surface.c:40
__PRETTY_FUNCTION__ = "unmap_xdg_surface"
popup = 0x55bcde46ce60
popup_tmp = 0x55bcde46ce60
configure = 0x7ffe24070360
tmp = 0x55bcde488020
17 0x00007fa23c47cd47 in xdg_surface_role_precommit (wlr_surface=0x55bcde488020, state=0x55bcde4881a8)
at ../types/xdg_shell/wlr_xdg_surface.c:330
surface = 0x55bcde46ce30
18 0x00007fa23c4813b2 in surface_commit_state (surface=0x55bcde488020, next=0x55bcde4881a8) at ../types/wlr_compositor.c:407
__PRETTY_FUNCTION__ = "surface_commit_state"
invalid_buffer = false
subsurface = 0xbd8e9aecae023300
--Type <RET> for more, q to quit, c to continue without paging--
19 0x00007fa23c48192a in surface_handle_commit (client=0x55bcde488850, resource=0x55bcde2fdb80) at ../types/wlr_compositor.c:523
surface = 0x55bcde488020
20 0x00007fa23bb5ed4a in () at /usr/lib/libffi.so.8
21 0x00007fa23bb5e267 in () at /usr/lib/libffi.so.8
22 0x00007fa23c517323 in () at /usr/lib/libwayland-server.so.0
23 0x00007fa23c5125cc in () at /usr/lib/libwayland-server.so.0
24 0x00007fa23c5151ca in wl_event_loop_dispatch () at /usr/lib/libwayland-server.so.0
25 0x00007fa23c512d37 in wl_display_run () at /usr/lib/libwayland-server.so.0
26 0x000055bcdb616885 in server_run (server=0x55bcdb68c5c0 <server>) at ../sway/server.c:307
27 0x000055bcdb61594e in main (argc=3, argv=0x7ffe24070af8) at ../sway/main.c:433
```
It seems to be happening because of this set of events all happening
in the span of a single transaction:
1. You kill a tiled window that is the only window in a workplace.
2. Sway will destroy the workspace but not yet the container - this
makes `con->pending.workspace` NULL.
3. Cursor glyphs get recomputed causing sway to recompute if the cursor
is on a container edge.
4. That computation causes an access to the NULL workspace. Crash.
Instead of doing this roundabout thing where we get the surface from the
view, let's instead get it from the `wlr_surface_state` that we already
track in `handle_commit`. This makes the NULL state impossible which is
what the old `get_geometry` is checking for and generally cleans
things up a little bit.
Also don't check if the geometry x/y changed, those will always
be 0 for xwayland.
Across a wayland compositor, there are multiple shells: It can be
a toplevel, or a layer_shell, or even something more meta like a drag
icon or highlight indicators when dragging windows around.
This object lets us store values that represent these modes of operation
and keep track of what object is being represented.
Since output layout is destroyed when the wayland display is destroyed
we run into a destroy listener order problem: Either the display starts
destroying the outputs first, in which case we're good: The existing
handling will clean up. However, things go wrong if the display decides
to destroy the output layout first. In this case, sway will hold
invalid references to the output layout as part of each output so that
when it finally goes to destroy them, sway will dereference destroyed
output layout bits.
Ref: https://github.com/swaywm/sway/pull/6844#issuecomment-1843599513
`gcc-14` added a new warning around dangerous use of `strncpy()` withi
known overflow:
../sway/config.c: In function 'do_var_replacement':
../sway/config.c:983:33: error: '__builtin___strncpy_chk' specified bound depends on the length of the source argument [-Werror=stringop-truncation]
983 | strncpy(newptr, var->value, vvlen);
| ^
../sway/config.c:971:45: note: length computed here
971 | int vvlen = strlen(var->value);
| ^~~~~~~~~~~~~~~~~~
It's a bit fishy to rely on truncating behaviour of `strncpy()`. The
change uses `memcpy()` as more explicit way to express copy of `vvlen`
bytes.
Remove any existing executed criteria items at unmap time. If a window
gets unmapped but not destroyed, we want to reapply 'for_window'
criteria. Fixes#6905.
This reverts commit afde6369
"seat: avoid unneeded reloading xcursor theme".
Always avoiding to reload the xcursor theme prevents reloading the
cursor even when this is desired. Instead seat_configure_xcursor
can determine whether a full reload is necessary.
To stay with the spirit of the reverted change, cursors are only fully
reloaded, if the theme has changed.
Fixes#6931
3d5ae9813d added logic to change the
underlying wlr_toplevel size for floating containers, but it does it
even if the container has no actual coordinates yet. This doesn't really
make sense to update the toplevel size in this case since there's many
things that could affect the initial coordinates (sway commands,
fullscreen state, etc.). Skip this by doing a crude check to see if the
current container state has any width.
Previous behavior was that only if resolution and refresh rate match
exactly, the mode was accepted. As fallback, the mode with the highest
refresh rate and the same resolution was chosen.
New behavior is that the mode with the closest match for the refresh
rate is used with a limit of up to 1Hz. The fallback behavior stays the same.
Additionally, the logging was made more verbose.
When using the `map_from_region` for pen tables, we will usually make
the available area as big as possible while maintaining the proportions
with the screen.
As most of the tablets uses a 16:10 ratios while the most popular screen
ratios is still 16:9, the argument for most people should be `0x0 1x0.9`
to have the maximum effective area.
However, the argument above won't work because the current code will
treat `0x...` as a hexadecimal number, instead of setting both `x` and
`y` to `0`.
This fix allows the use of the following syntax:
```
input type:tablet_tool {
map_from_region 0x0 1x0.9
}
```
If a floating client resizes itself, sway updates several of its
internal dimensions to match but not wlr_toplevel. This means that the
next time wlroots sends a toplevel configure event, it can have wrong
coordinates that resize the client back to its old size. To fix this,
let's just use wlr_xdg_toplevel_set_size so the wlr_toplevel has the
same dimensions as sway.
Exactly the same as 0183b9d35d0ce750588e700e536b7d2e367b0d0a but the
logic is onlly applied to xdg_shell and not xwayland.
This isn't the right fix for this issue because the xwayland code also
uses this function and updating the wlr_toplevel there doesn't make
sense and also causes problems. Fixes#7722.
This reverts commit bf44690ee8.
If a floating client resizes itself, sway updates several of its
internal dimensions to match but not wlr_toplevel. This means that the
next time wlroots sends a toplevel configure event, it can have wrong
coordinates that resize the client back to its old size. To fix this,
let's just use wlr_xdg_toplevel_set_size so the wlr_toplevel has the
same dimensions as sway. Fixes#5266.
Regular clients are not allowed to use this interface. wlroots
already sends a protocol error if a non-Xwayland client tries to
use this interface, but let's remove all temptation by hiding it
completely.
With recent wlroots changes, backends which don't support output
modes can now support being disabled.
We were always marking mode-less outputs as disabled. Stop doing
that, check whether the output takes up some space in the layout
instead.
Sway has two knobs to control idling:
- seat idle_inhibit: when the seat is active (ie. not idle), this
extends the active state. When the seat is idle, this is
ignored.
- seat idle_wake: when the seat is idle, this wakes up the seat.
When the seat is active, this is ignored.
The motivation for the deprecation is two-fold:
- The concept of "seat idle state" is ill-defined. Each idle-notify-v1
client will pass a different idle timeout. With the old logic, a
seat was declared idle if and only if all idle-notify-v1 timeouts have
expired. However, if only a portion of the timeouts have expired,
then some clients would wake up, and the rest would stay active.
This is inconsistent with the definition of idle_inhibit/idle_wake:
idle_inhibit was used for clients which are waking up.
- It never worked properly with the new idle-notify-v1 protocol
and no-one noticed. Only the legacy KDE idle protocol is taken
into account, but that protocol is not used anymore.
On multi-seat configurations a zwp_pointer_gestures_v1 global was
created for every seat.
Instead, create the global once in the input manager, to be shared
across all seats.
In case a display is unplugged, the sway output may be removed from the
userdata before the gamma_control can be reset. In this case we can't
schedule a commit on the output, simply return within the function.
backtrace full:
#0 handle_gamma_control_set_gamma (listener=0x4856a8 <server+616>, data=0x7ffce1ed59c0) at ../sway/desktop/output.c:1105
server = 0x485440 <server>
event = 0x7ffce1ed59c0
output = 0x0
#1 0x00007f430d1dca0c in wl_signal_emit_mutable ()
from /nix/store/ky1g6ylzr2m4bq8fy0gzrnqmjr6948k5-wayland-1.22.0/lib/libwayland-server.so.0
No symbol table info available.
#2 0x00007f430d142370 in gamma_control_destroy (gamma_control=0x29eb9b0) at ../types/wlr_gamma_control_v1.c:37
manager = 0x27e33e0
output = 0x2a10770
event = {output = 0x2a10770, control = 0x0}
#3 0x00007f430d14239b in gamma_control_handle_output_destroy (listener=<optimized out>, data=<optimized out>)
at ../types/wlr_gamma_control_v1.c:59
gamma_control = <optimized out>
#4 0x00007f430d1dca0c in wl_signal_emit_mutable ()
from /nix/store/ky1g6ylzr2m4bq8fy0gzrnqmjr6948k5-wayland-1.22.0/lib/libwayland-server.so.0
No symbol table info available.
#5 0x00007f430d12a0e0 in wlr_output_destroy (output=output@entry=0x2a10770) at ../types/output/output.c:384
cursor = <optimized out>
tmp_cursor = <optimized out>
layer = <optimized out>
tmp_layer = <optimized out>
#6 0x00007f430d114ecf in disconnect_drm_connector (conn=conn@entry=0x2a10770) at ../backend/drm/drm.c:1757
__PRETTY_FUNCTION__ = "disconnect_drm_connector"
#7 0x00007f430d117078 in scan_drm_connectors (drm=drm@entry=0x1eebab0, event=event@entry=0x7ffce1ed5c1c) at ../backend/drm/drm.c:1597
c = <optimized out>
wlr_conn = 0x2a10770
drm_conn = 0x2e760d0
conn_id = <optimized out>
index = 4
i = 4
res = 0x2e761f0
seen_len = 5
seen = {true, true, true, true, true, false}
new_outputs_len = 0
new_outputs = 0x7ffce1ed5ab0
conn = <optimized out>
tmp_conn = <optimized out>
index = <optimized out>
#8 0x00007f430d113425 in handle_dev_change (listener=0x1eebbb0, data=0x7ffce1ed5c18) at ../backend/drm/backend.c:157
drm = 0x1eebab0
change = 0x7ffce1ed5c18
#9 0x00007f430d1dca0c in wl_signal_emit_mutable ()
from /nix/store/ky1g6ylzr2m4bq8fy0gzrnqmjr6948k5-wayland-1.22.0/lib/libwayland-server.so.0
No symbol table info available.
#10 0x00007f430d111696 in handle_udev_event (fd=<optimized out>, mask=<optimized out>, data=<optimized out>)
at ../backend/session/session.c:213
event = {type = WLR_DEVICE_HOTPLUG, {hotplug = {connector_id = 0, prop_id = 0}}}
devnum = <optimized out>
dev = 0x1ed9460
session = <optimized out>
udev_dev = 0x2e70db0
sysname = 0x2e73c60 "card0"
devnode = <optimized out>
action = 0x7f430d6677b5 "change"
seat = <optimized out>
__PRETTY_FUNCTION__ = "handle_udev_event"
#11 0x00007f430d1de8e2 in wl_event_loop_dispatch ()
from /nix/store/ky1g6ylzr2m4bq8fy0gzrnqmjr6948k5-wayland-1.22.0/lib/libwayland-server.so.0
No symbol table info available.
#12 0x00007f430d1dc445 in wl_display_run () from /nix/store/ky1g6ylzr2m4bq8fy0gzrnqmjr6948k5-wayland-1.22.0/lib/libwayland-server.so.0
No symbol table info available.
#13 0x000000000041daa5 in server_run (server=server@entry=0x485440 <server>) at ../sway/server.c:338
No locals.
#14 0x000000000041cf4d in main (argc=<optimized out>, argv=0x7ffce1ed5fe8) at ../sway/main.c:415
verbose = false
debug = false
validate = false
allow_unsupported_gpu = false
config_path = 0x0
c = <optimized out>
where event->output->data is NULL:
(gdb) p event->output->data
$5 = (void *) 0x0
This allows for layer shell surfaces to receive focus while the surface is explicitly focused, i.e allowing
text fields to receive keyboard input just like a regular surface.
Clear was done using sway_output's logical dimensions, instead of the
wlr_output physical dimensions. This meant that when output scaling was
applied, only a part of the screen would be cleared.
Use the wlr_output dimensions instead.
Regressed by: https://github.com/swaywm/sway/pull/7552
Simon Ser
Ronan Pigott
Luofan Chen
llyyr
llyyr
Access
Aleksei Bavshin
Kirill Primak
Alexander Orzechowski
Merlin Lex
Violet Purcell
Tamino Bauknecht
Daniel De Graaf
Alexander Orzechowski
Billli11
mrusme
Sergei Trofimovich
EBADBEEF
NemuiBanila
Lina Banik
Dudemanguy
iff
Manuel Stoeckl
Johan Sköld
Leonardo Hernández Hernández
ookami
bretello
Artturin
nukoseer
Mark Bolhuis
Cezary Drożak
Rouven Czerwinski
33KK
Shaked Flur
Erik Reider
hrdl
Kenny Levinsen