Adds detection code to handle pci-*-platform-* strings
in ID_PATH
References: https://github.com/swaywm/sway/issues/6590
Signed-off-by: Jari Ronkainen <ronchaine@gmail.com>
If the surface the pointer started to interact with is destroyed we also
want the seatop_down to end. In case a drag is initiated we receive a
call to handle_end.
This solves an issue where layer-shell items would not receive a button
release event when the pointer left them while being pressed. The
default seatop changes focus immediately while seatop_down defers any
focus changes until the pointer is released or seatop_down is destroyed.
Losing the precision resulted in wlr_cursor and wlr_seat::pointer_state
getting out of sync during pointer motion in seatop_down.
Since the difference was always under 1 px, it was practically
impossible to notice in normal use.
But because of being out of sync, cursor_rebase would always end up
incorrectly calling wlr_seat_pointer_notify_motion from
seatop_default_begin (on releasing mouse button) which broke cursor
locking.
See #5405Closes#4632
When emulating touch, the simulating_pointer_from_touch field is
set to true. It's switched back to false when a touch_up event is
received. However we need to ensure we always send a wl_pointer.frame
event following a group of other wl_pointer events.
Since a touch_frame event is always guaranteed to come after a group
of touch events, unset simulating_pointer_from_touch in the touch_frame
handler instead of the touch_up handler. Add a new field to know whether
the touch_frame handler should stop emulation.
get_current_time_msec is only used in cursor.c, so we can move it in and
make it static. This is primarily intended to avoid a symbol collision
with wlroots, which we unfortunately do not have a good solution for
yet.
Implements functionality described in [1]. Please see the issue for a
video with a demonstration of the new behavior.
An issue is that titlebars cover up a significant portion of the top
edge drop area. The solution is simply to change the edge drop area
hitbox to start at the contents instead of the container.
[1] https://github.com/swaywm/sway/issues/6218
When issuing a focus command on a specific container, users expect to
proceed it even if is hidden by a fullscreen window.
This matches the behavior of i3.
Pending state is currently inlined directly in the container struct,
while the current state is in a state struct. A side-effect of this is
that it is not immediately obvious that pending double-buffered state is
accessed, nor is it obvious what state is double-buffered.
Instead, use the state struct for both current and pending.
Every seat_set_focus* should be followed by a transaction_commit_dirty.
In cases where the focus change is followed by a seatop_begin* this is
not needed, as transaction_commit_dirty is then called by the
seatop_begin* function.
Fixes#6034
Before this commit, there would be cases where focus changes from one
window to another, the new window activates text_input, then the old
window sends a deactivate request, making text_input unfocused
completely.
There is no need to check for transactions at the end of every user
input, as the vast majority of input will not issue transactions. This
implementation can also hide where changes are made without an
appropriate transaction commit, as a future unrelated input would issue
the commit instead.
Instead, commit transactions in places where changes are made or are
likely to be made.
In i3, the workspace_layout command does not affect the
workspace layout. Instead, new workspace level containers
are wrapped in the desired layout and the workspace layout
always defaults to the output orientation.
The keyboard group's effective keyboard layout was never being changed
due to a condition that incorrectly preventing it from being performed.
The IPC event that follows the change was correctly being prevented.
To query whether a container is sticky, checking `con->is_sticky` is
insufficient. `container_is_floating_or_child` must also return true;
this led to a lot of repetition.
This commit introduces `container_is_sticky[_or_child]` functions, and
switches all stickiness checks to use them. (Including ones where the
container is already known to be floating, for consistency.)
Previously, `find_edge` on a single fullscreen view would occasionally
return an edge rather than `WLR_EDGE_NONE`. This would trigger entry
into `seatop_resize_tiling`, which doesn't have meaning for a fullscreen
view.
The result was that the fullscreen container hitbox was considered to be
that of where it'd be if it were tiling, so most clicks would not go
through.
Fixes#5792.
When scrolling on a tabbed/stacked container, i3 focuses its
inactive-focused focused child. Sway does the same, but then resets the
focus to whatever was focused previously.
Ref e5992eed16/src/click.c (L207-L219)
We can't arm the timer during cursor creation since the config may not
be ready yet. Instead arm the timer while applying the input
configuration, by this time the configuration has been parsed and we can
arm the hide timer.
Fixes#5686
According to the wayland docs, wayland timers are disarmed on creation.
This leads to the cursor not being hidden if there is no activity after
creation, since the timer is armed on activity, but not at creation.
Arm the timer after creation to ensure the cursor is hidden even if
there is no cursor activity after creation.
Fixes#5684
Reset the event source after unhiding the cursor, to ensure that the
timeout starts after showing the cursor. Also remove the open coded
variant in seat_consider_warp_to_focus().
Fixes#5679
This changes it so all libinput config options are set on any device
that supports it. Previously, only a subset of libinput config options
were being considered depending on the input type. Instead of trying to
guess which properties the device may support, attempt to set any
configured property regardless of the device type. All of the functions
already have early returns in them for when the device does not actually
support the property. This brings the configuration side inline with
describe_libinput_device for the IPC side. This change was prompted
by a tablet tool showing the calibration matrix property in the IPC
message, but not being able to actually change it since that property
was only being considered for the touch input type.
On warping to a cursor hint, update the pointer position we track as
well, so that on the next pointer rebase we don't send an unexpected
synthetic motion event to clients.
Fixes#5405.
Previously, we called output_disable prior to wlr_output_commit. This
mutates Sway's output state before the output commit actually succeeds.
This results in Sway's state getting out-of-sync with wlroots'.
An alternative fix [1] was to revert the changes made by output_disable
in case of failure. This is a little complicated. Instead, this patch
makes it so Sway's internal state is never changed before a successful
wlr_output commit.
We had two output flags: enabled and configured. However enabled was set
prior to the output becoming enabled, and was used to prevent the output
event handlers (specifically, the mode handler) from calling
apply_output_config again (infinite loop).
Rename enabled to enabling and use it exclusively for this purpose.
Rename configure to enabled, because that's what it really means.
[1]: https://github.com/swaywm/sway/pull/5521
Closes: https://github.com/swaywm/sway/issues/5483
As per the Wayland spec [1]:
> The icon surface is an optional (can be NULL) surface that provides an
> icon to be moved around with the cursor.
However, as of now Sway "start_drag" signal handler does not starts the
DND session unless a non-NULL drag icons is provided. This patch fixes
it by skipping handling of the drag icon if it is null.
Fixes#5509
[1] https://wayland.freedesktop.org/docs/html/apa.html#protocol-spec-wl_data_device
Signed-off-by: Nick Diego Yamane <nickdiego@igalia.com>
wlr_drag installs grabs for the full duration of the drag, leading to
the drag target not being focused when the drag ends. This leads to
unexpected focus behavior, especially for the keyboard which requires
toggling focus away and back to set.
We can only fix the focus once the grabs are released, so refocus the
seat when the wlr_drag destroy event is received.
Closes: https://github.com/swaywm/sway/issues/5116
Prior to this commit, a tablet device could trigger mouse button down
bindings if the pen was pressed on a surface that didn't bind tablet
handlers -- but it wouldn't if the surface did bind tablet handlers.
We should expose consistent behavior to users so that they don't have to
care about emulated vs. non-emulated input, so stop triggering bindings
for any non-pointer devices.
Previously, a tablet or touch device could report activity as a pointer
device if it went through pointer emulation. This commit refactors idle
sources to be consistently reported based on the type of the device that
generated an input event, and now how that input event is being
processed.
Prior to this commit, a tablet device could trigger mouse button down
bindings if the pen was pressed on a surface that didn't bind tablet
handlers -- but it wouldn't if the surface did bind tablet handlers.
We should expose consistent behavior to users so that they don't have to
care about emulated vs. non-emulated input, so stop triggering bindings
for any non-pointer devices.
This commit makes tablet input more usable when `focus_follows_mouse` is
set to `no`.
Previously, tapping down on surfaces that bound tablet input would not
switch focus, whereas tapping on surfaces that didn't (and hence went
through pointer emulation) did.
This adds support for wlr_keyboard_group's enter and leave events. The
enter event just updates the keyboard's state. The leave event updates
the keyboard's state and if the surface was notified of a press event
for any of the keycodes, it is refocused so that it can pick up the
current keyboard state without triggering any keybinds.
If a resize is triggered on a tabbed or stacked container, change focus
to the tab which already had inactive focus, rather than to the tab
whose border was clicked -- otherwise, we'd change the active tab when
the user probably just wanted to resize.
This commit makes `get_current_time_msec` correctly return milliseconds
as opposed to microseconds. It also considers the value of `tv_sec`, so
we don't lose occasionally go back in time by one second. Finally, the
function is moved into `util.c` so that it can be reused elsewhere
without having to consider these pitfalls.
We are not allowed to do what we did in #5222 and pass a `NULL` surface
wlr_seat_pointer_notify_enter(), and it's causing crashes when an
xdg-shell popup is active (see #5294 and swaywm/wlroots#2161).
Instead, solve #5220 using the new wlroots API introduced in
swaywm/wlroots#2217.
This commit moves tool tip event generation into seatops. In doing so,
some corner cases where we'd erroneously (but likely harmlessly)
generate both tablet and pointer events simultaneously are eliminated.
This is a tiny cleanup commit that renames `simulated_tool_tip_down` to
`simulating_pointer_from_tool_tip`, making it match
`simulating_pointer_from_touch`.
This is a better name since it makes it clear that it's the *pointer*
that's being simulated, not the tool tip.
The spec has this to say about sending events on confine creation:
Whenever the confinement is activated, it is guaranteed that the
surface the pointer is confined to will already have received pointer
focus and that the pointer will be within the region passed to the
request creating this object.
...and on region update:
If warped, a wl_pointer.motion event will be emitted, but no
wp_relative_pointer.relative_motion event.
Prior to this patch, sway did neither, and updated the hardware cursor
position without notifying the underlying surface until the next motion
event. This led to inconsistent results, especially in applications that
draw their own software cursor.
Currently, when tablet input exits a window during an implicit grab, it
passes focus to another window.
For instance, this is problematic when trying to drag a scrollbar, and
exiting the window — the scrollbar motion stops. Additionally,
without `focus_follows_mouse no`, the tablet passes focus to whatever
surface it goes over regardless of if there is an active implicit.
If the tablet is over a surface that does not bind tablet handlers, sway
will fall back to pointer emulation, and all of this works fine. It
probably should have consistent behavior between emulated and
not-emulated input, though.
This commit adds a condition for entering seatop_down when a tablet's
tool tip goes down, and exiting when it goes up. Since events won't be
routed through seatop_default, this prevents windows losing focus during
implicit grabs.
Closes#5302.
Keyboard group keyboards should not call sway_keyboard_configure. They
do not have an input config and they derive their state from the
keyboards within the group.
For some reason, I got sway_keyboard_configure and
seat_configure_keyboard mixed up and thought seat_reset_device called
the latter.
Calling sway_keyboard_configure with a keyboard group's keyboard is not
supported and can cause issues. If any clients are listening to the ipc
input event, a sigsegv will occur due to not every property - such as
identifier - being wired up for keyboard group keyboard's.
This also adds an assertion to sway_keyboard_configure to ensure that
this does not occur in the future and any instances are quickly caught.
If the keyboard that triggers the reload binding is using the default
keymap, default repeat delay, and default repeat rate, the associated
keyboard group is never being destroyed on reload. This was causing the
keyboard group's keyboard not to get disarmed and result in a
use-after-free in handle_keyboard_repeat.
If the keyboard was not using the defaults for all three settings, then
it's associated keyboard would get destroyed during the reset - which
did disarm the keyboard group's keyboard. In this case, the
use-after-free would not occur.
This adds a block to input_manager_reset_all_inputs that resets the
keyboard for all keyboard groups in all seats, which will disarm them.
Since the inputs are all being reset anyway, which will reset all
individual keyboards, it is not necessary to be selective on which ones
get reset.
Add a separate per-view shortcuts_inhibitor command that can be used
with criteria to override the per-seat defaults. This allows to e.g.
disable shortcuts inhibiting globally but enable it for specific,
known-good virtualization and remote desktop software or, alternatively,
to blacklist that one slightly broken piece of software that just
doesn't seem to get it right but insists on trying.
Add a flag to sway_view and handling logic in the input manager that
respects that flag if configured but falls back to per-seat config
otherwise. Add the actual command but with just enable and disable
subcommands since there's no value in duplicating the per-seat
activate/deactivate/toggle logic here. Split the inhibitor retrieval
helper in two so we can use the backend half in the command to retrieve
inhibitors for a specific surface and not just the currently focused
one. Extend the manual page with documentation of the command and
references to its per-seat sibling and usefulness with criteria.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
This is a small cleanup commit for removing `sway_tablet` parameters
from functions that already accept `sway_tablet_tool`, since the tablet
reference can be accessed through `tool->tablet`.
This commit renames `motion` and `axis` handlers to `pointer_motion` and
`pointer_axis`, respectively, to disambiguate them from their tablet
(and future touch) handlers. `button` is left as-is, as it is generic
across input devices.
This commit moves tablet motion logic into a seatop handler.
As a side-effect of seatop implementations being able to receive
tablet motion events, fixes#5232.
This commit refactors `cursor_rebase` into `cursor_update_image`, and
moves sending pointer events to the two existing call sites. This will
enable this code to be reused for tablets.
Refs #5232
Currently, clients receive wl_data_device::leave events only when the
pointer enters another surface, which leads to issues, such as #5220.
This happens because wlr_seat_pointer_notify_enter() is called when
handling motion events only for non-NULL surfaces.
Fixes#5220
`handle_tablet_tool_set_cursor` was copied from input/cursor.c's
`handle_request_set_cursor`, but the focused surface check was not
adjusted appropriately.
Fixes#5257.
Fixes#4819.
This commit ensures that `seat_set_focus` is called to transfer focus
when a window is selected via a pen. Previously, it would race with
`node_at_coords`, and only properly transfer focus if its returned
`surface` was NULL.
Some input rules, like `map_to_output`, are dependent on a specific
screen being present. This currently does not work for hotplugged
outputs, or outputs that are processed after the input device is
initially probed.
This commit fixes both cases, by reconfiguring inputs on each output
addition.
Fixes#5231.
This commit refactors `cursor_handle_activity` to also take the idle
source, so that it can be reused for tablet and touch activity.
Previously, the timeouts would be tracked, but the cursor would never be
un-hidden for anything but pointers.
Fixes#5169.
If we started holding the tool tip down on a surface that accepts tablet
v2, we should notify that surface if it gets released over a surface
that doesn't support v2.
Since GTK supports tablet v2, this fixes the common case of starting a
drag over a GTK surface (e.g. scrollbar) and releasing it outside (e.g.
over the gaps between sway containers, or in a terminal).
Refs #5230.
Jari Ronkainen
Simon Plakolb
David Rosca
Simon Ser
Kenny Levinsen
tomKPZ
xdavidwu
lbonn
David96
Tadeo Kondrak
Andri Yngvason
Ronan Pigott
Tudor Brindus
Brian Ashworth
Tamir Zahavi-Brunner
Rouven Czerwinski
Antonin Décimo
Nick Diego Yamane
wb9688
Thomas Hebb
Michael Weiser
Adam Kürthy