This is necessary because commands in the config file (mode for
instance) emit ipc events, and if ipc_init has not been called the
ipc_clients_list is not initialized, and we segfault. This fixes that
bug.
This implements commands such as:
workspace number 9: test
If a workspace with the given number exists then it will be focused,
otherwise a new workspace with the given name will be created.
When using a bar on a named output, load_swaybars() requires the
output to be active (ie. in the root container), but this is not the case if
the bar is added to the last output. To fix this, load_swaybars() is now
called after the output has been added to the root container.
After fixing that, swaybar would segfault due to using the wrong index
variable when loading outputs and config.
Indicator border color is now used only when a container is the only
child. Reason for the change? i3 does it this way. Sway container
borders are now a bit more similar to i3 ones.
This patch makes it possible to move views between outputs using the
`move left|right|up|down` commands.
It behaves similar to i3 with one important difference. The focus will
always follow the view being moved, unlike i3 where the focus doesn't
always follow the view to a new output (I assume that's a bug in i3).
`vertical` and `horizontal` should be swapped.
If border_left and border_right were set to 0, the vertical borders
instead of the horizontal borders would be hidden.
i3 handles this command equally.
Fixes#819. If workspace is focused and command 'move container to
workspace/output' is issued, workspace child containers are wrapped in a
new container and moved according to command.
This is a feature that can't work the same as i3, because there is no
real window classes in wayland. This way, we avoid null titles as much
as possible.
When workspace_auto_back_and_forth is enabled, workspaces get switched
twice with previously mentioned command, which is not the expected
behavior.
Removes one redundant creation of previous workspace.
Focus the container on the output (not the output itself) when an output is
focused.
This is intended to fix a bug where borders are not updated correctly when
switching the vt away/back to sway.
When switching back to a workspace after new window creation, it is now
necessary to descend the focus stack into the focused container of the
workspace to determine which container should get the focus. This is because
the `set_focused_container()` function no longer automatically descends into
the focus stack to find the correct view to focus.
Replace `update_view_border()` with `update_container_border()`. The latter
should handle both the case where the container is a view or if the container
has children.
The previous implementation of focus handling assumed that only views can be
focused. Containers can also be focused with a command like `focus parent` or
`focus child`.
Change `set_focused_container()` to handle the case of the given container
being a container with children and update borders accordingly.
Deeply nested containers which had their layouts changed didn't update
their actual_geometry, this messed up their child containers. Those got
width and height of 0, which was then decreased for stacked/tabbed
containers by title height. Underflow ensued, these containers suddenly
had height 4294967273. In short, not updating actual_geometry didn't
play nicely with nested containers.
When titlebar is hidden, top border of the topmost view inside
tabbed/stacked container will not be drawn. This is changed in layout.c
On the other hand, top border should be drawn sometimes, for example
when titlebar is hidden on a view that is not the topmost inside
tabbed/stacked container. This is changed in border.c
Previously, cmd_kill only closed a focused view, while containers were
not affected. Now it closes all views that are children of the focused
container.
Whenever a stacked or tabbed container has focused, paint the titlebars of all
its child windows to be focused as well to indicate the parent stack/tab
container has the focus.
In `move_focus()`, when given an output, set the focus to the workspace of that
output instead of the output itself.
This fixes a bug that did not allow users to switch between outputs introduced
in afc6ad6.
It also fixes other issues before that commit when a workspace with children
was selected and the user tried to switch focus in the direction of another
output.
In the `focus parent` command, do not set focus above the workspace level.
These containers are not meant to be focused.
This prevents a crash on repeated `focus parent` commands.
Panels were explicitly rendered by calling wlc_surface_render in
handle_output_pre_render. Calling wlc_surface_render does not set the
surface's geometry (like wlc_view_set_geometry does). Sway did not call
wlc_view_set_geometry for panels, so wlc defaulted their geometry to be at
the origin. This is not correct for bars unless their location is top.
Furthermore, for a surface to receive pointer events, its mask has to be
set to visible. This causes wlc to render these surfaces, causing panels
and backgrounds to be rendered twice.
This commit makes panels and surfaces visible, sets the correct geometries
and removes the code that explicitly rendered them.
Tabbed/stacked containers are now created only if a view is present on
the workspace. If a view is created on previously empty tabbed/stacked
workspace, it gets wrapped in a container.
Prior to this commit all windows (e.g. shell surfaces) were handled the same
way in handle_view_created. Since backgrounds and panels have to be treated
differently, they could not be shell surfaces. This changes checks whether
a client is a background or a panel in handle_view_created and exists to
let them be dealt with elsewhere.
This fixes a segfault, when trying to get parent of the workspace/root container/(?), as it is not assuered that the view's parent node is not null in the loop
Escape line return when reading from a file with the '\' character.
Similar to shell scripts.
Signed-off-by: Roosembert Palacios <roosembert.palacios@epfl.ch>
Escape line return in configuration file with the '\' character. Similar
to shell scripts.
Signed-off-by: Roosembert Palacios <roosembert.palacios@epfl.ch>
Values cannot be negative or 0; if so uses the default 75x50.
Uses the same syntax as i3: floating_minimum_size <width> x <height>, although the x can be anything.
when creating a new output, move to that output all extant workspaces
that are assigned to that output.
(unrelated) remove comment that was no longer applicable, fix spacing in
an assignment
When headers were installed in more sofisticated places (but package
config knows it right), it revealed missing paths in CMake
configuration. Lets fix it.
This patch makes sure to clear the border buffer of fullscreen view so
the border doesn't get drawn behind a fullscreen view, which would be
visible if the view was transparent.
When creating a new view, wlc usually returns an initial geometry with
size 1x1. Setting those values as desired width/height causes a problem
for some windows (QT5) because they don't request a new geometry for
instance when made floating, so the floating window becomes 1x1.
To fix this problem we can just omit setting the desired width/height on
new_view and instead let the clients request a certain size if they feel
like it. e.i. gnome-calculator.
Fix#578
I made this configurable but I didn't make the command for it. That's
left as an exercise to an eager contributor.
mod_scroll_behavior [gaps inner|gaps outer]
Would merge implementions of more behaviors for mod+scroll, if anyone
has some neato ideas.
The borders are implemented as a surface/buffer attached to each view
which is sent to and rendered by wlc in the view_pre_render callback.
All the drawing logic is handled in sway/border.c and all the logic for
calculating the geometry of the border/view is handled in
`update_geometry` in sway/layout.c (same place as gaps are calculated).
The include command (`include <path>`) makes it possible to include sub
config files from the main config file (or from within other sub config
files).
The include command uses the following rules for including config files:
* the `path` can be either a full path or a path that is relative to the
parent config. Shell expansion is supported, so it's possible to do
`include ~/.config/sway.d/*`.
* The same config file can only be included once (to prevent include
cycles). If a config is included multiple times it will just be
ignored after it has been included once.
* Including a sub config file is the same as inserting the content of
that file into the parent config, thus rules about overwriting
bindsyms etc. works the same as for a single config.
Implement #542
Sway has been very strict when it comes to key handling. Only on an
exact match would a bindsym be triggered.
This patch makes it less strict by for instance allowing the key combo
`$mod+1+2` to act as `$mod+2` if 2 was the last pressed key and `$mod+1`
if 1 was the last pressed key.
The new key handling uses the following algorithm:
1. List of bindings sorted by number of keys in binding (already the
default)
2. Find all bindings covered by the current keyboard state and list them
by same order as in 1.
3. Select the first binding from the list where the last pressed key is
part of the binding.
Addresses #452
Before passing a command to a command handler the quotes are stripped
from each argument in the command. This is usually the wanted behavior
but causes a problem in the case of `exec` where quoted arguments can be
required when passing the exec command to `/bin/sh -c`.
This patch makes `exec` a special case and doesn't strip quotes from the
arguments. It will just pass the exec command verbatim to the exec
command handler.
Fix#518
desktop_shell.panel_size was only used to determine if sway should
rearrange the output when rendering the panel in the output_pre_render
hook. This is not needed since the output will have been arranged at
that point.
It also caused sway to rearrange all the time when running with two
or more different monitors/resolutions because panel_size kept changing
with every output_pre_render callback.
Should fix#514
Swaylock spawns and focuses a view for each output in sway. This can
sometimes move the focus to a new output after locking and unlocking the
screens.
This patch makes sure that the output which had focus when swaylock
was invoked, will regain focus once swaylock is closed/unlocked.
Fix#499
Documents most of the bar commands in sway-bar(5) manpage.
The following command has not been document because they haven't been
fully implemented yet:
* mode
* hidden_state
* modifier
* tray_output
* tray_padding
Close#375
This should be a real fix for #509
This schedules a render when a background or panel is added to sway
through the desktop shell interface, that makes sure the render isn't
scheduled before the bg or panel is ready and you don't end up with a
black screen until the cursor is moved.
This makes sure that the outputs are rendered when sway is launched, so
the user doesn't have to move the cursor before the background and bar
gets rendered on screen.
Fixes#509
It's possible to assign workspaces to certain outputs using the command:
workspace <name> output <output>
However, this did not work in some cases where the workspace was
assigned before the given output was made available to sway.
This patch fixes those cases.
D.B
Nicolas Cornu
Drew DeVault
Zandr Martin
Zandr Martin
Patrick Sauter
Ryan Dwyer
Mikkel Oscar Lyderik
Drew DeVault
Lukas Lihotzki
Hummer12007
James Murphy
Götz Christ
Guillaume Brogi
Manuel Mendez
minus
Tony Crisci
David Eklov
Zandr Martin
thuck
Roosembert Palacios
wdbw
Eric Engestrom
Jasen Borisov
Daniel Lockyer
Raman Varabets
Tomáš Čech
Chang Liu
Kevin Hamacher
crondog
Kevin Hamacher