This introduces a new view_impl function: is_transient_for. Similar to
container_has_ancestor but works using the surface parents rather than
the tree.
This patch modifies view_is_visible, container_at and so on to allow
transient views to function normally when they're in front of a
fullscreen view.
The previous behaviour was to damage the entire view, which would
recurse into each popup. This patch makes it damage only the popup's
surface, and respect the surface damage given by the client.
This adds listeners to the popup's map and unmap events rather than
doing the damage in the create and destroy functions. To get the popup's
position relative to the view, a new child_impl function get_root_coords
has been introduced, which traverses up the parents.
* Create a view on workspace 1
* Switch to workspace 2 (on the same output) and create a floating
sticky view
* Use criteria to focus the view on workspace 1
Previously, we only moved the sticky containers when using
workspace_switch, but the above method of focusing doesn't call it. This
patch relocates the sticky-moving code into seat_set_focus_warp.
A side effect of this patch is that if you have a sticky container
focused and then switch workspaces, the sticky container will no longer
be focused. It would previously retain focus.
In seat_set_focus_warp, new_output_last_ws was only set when changing
outputs, but now it's always set. This means new_output_last_ws and
last_workspace might point to the same workspace, which means we have to
make sure we don't destroy it twice. It now checks to make sure they're
different, and to make this more obvious I've moved both calls to
workspace_consider_destroy to be next to each other.
Re-focus on the container on which the cursor hovers over. A
special case is, if there are menus or other subsurfaces open
in the focused container. It will prefer the focused container
as long as there are subsurfaces.
This commit starts caching the previous node as well as the
previous x/y cursor position. Re-calculating the previous
focused node by looking at the current state of the cursor
position does not work, if the environment changes.
Fixes `hide_edge_borders smart` when gaps are in use.
Implements `hide_edge_borders smart_no_gaps` and `smart_borders
on|no_gaps|off`.
Since `smart_borders on` is equivalent to `hide_edge_borders smart`
and `smart_borders no_gaps` is equivalent to `hide_edge_borders
smart_no_gaps`, I opted to just save the last value set for
`hide_edge_borders` and restore that on `smart_borders off`. This
simplifies the conditions for setting the border.
When the last output is disconnected, output_disable is called like
usual and evacuates the output to the root->saved_workspaces list. It
then calls root_for_each_container to remove (untrack) the output from
each container's outputs list. However root_for_each_container did not
iterate the saved workspaces, so when the output gets freed the
containers would have a dangling pointer in their outputs list. Upon
reconnect, container_discover_outputs would attempt to use the dangling
pointer, causing a crash.
This makes root_for_each_container check the saved workspaces list,
which fixes the problem.
This changes our gaps implementation to behave like i3-gaps.
Our previous implementation allowed you to set gaps on a per container
basis. This isn't supported by i3-gaps and doesn't seem to have a
practical use case. The gaps_outer and gaps_inner properties on
containers are now removed as they just read the gaps_inner from the
workspace.
`gaps inner|outer <px>` no longer changes the gaps for all workspaces.
It only sets defaults for new workspaces.
`gaps inner|outer current|workspace|all set|plus|minus <px>` is now
runtime only, and the workspace option is now removed. `current` now
sets gaps for the current workspace as opposed to the current container.
`workspace <ws> gaps inner|outer <px>` is now implemented. This sets
defaults for a workspace.
This also fixes a bug where changing the layout of a split container
from linear to tabbed would cause gaps to not be applied to it until you
switch to another workspace and back.
When we eventually implement `workspace <ws> gaps inner|outer <px>`,
we'll need to store the gaps settings for workspaces before they're
created. Rather than create a workspace_gaps struct, the approach I'm
taking is to rename workspace_outputs to workspace_configs and then add
gaps settings to that.
I've added a lookup function workspace_find_config. Note that we have a
similar thing for outputs (output_config struct and output_find_config).
Lastly, when freeing config it would create a memory leak by freeing the
list items but not the workspace or output names inside them. This has
been rectified using a free_workspace_config function.
view_is_visible would return false, which meant the view wouldn't
receive a frame done event. view_is_visible needs to make an exception
for floating containers.
This also moves the workspace_is_visible check to an earlier location
for performance reasons.
This does the following:
* Removes the xdg-decoration surface_commit listener. I was under the
impression the client could ignore the server's preference and set
whatever decoration they like using this protocol, but I don't think
that's right.
* Adds a listener for the xdg-decoration request_mode signal. The
protocol states that the server should respond to this with its
preference. We'll always respond with SSD here.
* Makes it so tiled views which use CSD will still have sway decorations
rendered. To do this, using_csd had to be added back to the view struct,
and the border is changed when floating or unfloating a view.
This replaces view.using_csd with a new border mode: B_CSD. This also
removes sway_xdg_shell{_v6}_view.deco_mode and
view->has_client_side_decorations as we can now get these from the
border.
You can use `border toggle` to cycle through the modes including CSD, or
use `border csd` to set it directly. The client must support the
xdg-decoration protocol, and the only client I know of that does is the
example in wlroots.
If the client switches from SSD to CSD without us expecting it (via the
server-decoration protocol), we stash the previous border type into
view.saved_border so we can restore it if the client returns to SSD. I
haven't found a way to test this though.
When a view unmaps, we start a transaction to destroy the container,
then when the transaction completes we destroy the container and unset
the view's container pointer. But if the view has remapped in the
meantime, the view's container pointer will be pointing to a different
container which should not be cleared.
This adds a check to make sure the view is still pointing to the
container being destroyed before clearing the pointer. The freeing of
the title format is also removed as it is already freed when the view
destroys in view_destroy.
If the output being disconnected contains views, and the views are being
relocated to another output of a different size, a transaction must
occur to reconfigure them. This means by the time
container_discover_outputs is called, the output is already disabled and
wlr_output is NULL.
I considered making it check output->wlr_output, but output->enabled
should work just as well and is more descriptive.
If you have swaybar docked to the top, and you create a floating sticky
container and switch workspaces on the same output, the sticky container
would move down by the height of swaybar on each switch.
This happens because when creating the workspace we set the dimensions
to the same as the output, then the subsequent arrange corrects it.
During this arrange, floating containers are translated so they stay
relative to the workspace. This translation needs to not occur for the
initial arrange.
This patch makes workspaces have a zero width and height when first
created, so we can detect whether this is the initial arrange and avoid
translating the floating containers if so.
This adds a `con` argument to `execute_command` which allows you to
specify the container to execute the command on. In most cases it leaves
it as `NULL` which makes it use the focused node. We only set it when
executing `for_window` criteria such as when a view maps. This means we
don't send unnecessary IPC focus events, and fixes a crash when the
criteria command is `move scratchpad` (because we can't give focus to a
hidden scratchpad container).
Each of the shell map handlers now check to see if the view has a
workspace. It won't have a workspace if criteria has moved it to the
scratchpad.
Fixes#2674.
The cause of the issue was in get_pango_layout. When we call
pango_parse_markup, `text` is the escaped string, and the unescaped
string is then computed and written to `buf`. We were then passing the
unescaped string to pango_layout_set_markup, but this function needs the
escaped string. `buf` is not needed and has been removed.
The other part of this PR refactors escape_markup_text to remove the
dest_length argument and removes the -1 return value on error. It now
assumes that you've allocated dest to the correct length.
Firstly, a change had to be made to the container_at functions. If you
create layout `T[view H[view view]]` and hover the second tab, the
container_at functions would return the focus_inactive child. They now
return the split container itself. To compensate for this,
dispatch_cursor_button has been adjusted to find the focus_inactive
child before focusing it.
The actual implementation of wheel scrolling is pretty straightforward.
This uses handle_cursor_axis, so I took a similar approach to
handle_cursor_button (ie. creating a dispatch_cursor_axis function).
root_for_each_container and root_find_container were using incorrect
logic to determine if a container was hidden in the scratchpad.
Containers will have a NULL parent if they are a direct child of a
workspace. Containers will have a NULL workspace if they are hidden in
the scratchpad.
The incorrect check meant that root_for_each_container would run the
callback on scratchpad containers twice. This meant that executing a
command such as `[class="$something"] scratchpad show` would cause the
command to run twice, resulting in the container being shown and hidden
again which is effectively a no op.
Fixes#2655.
* Create layout T[view view]
* Move the cursor into the title bar area
* Close both views
Sway would crash because container_at_tabbed would attempt to divide by
zero when there are no children.
The children check isn't needed for the stacked function because it
doesn't divide anything by the number of children.
Fixes#2636.
* Make container_add_sibling's `after` argument a boolean.
* Use a constant for drop layout border
* Make thickness an int
* Add button state check
* Move comments in seat_end_move_tiling
When workspace_wrap_children is called on a workspace which has a
fullscreen child and the fullscreen child is a direct child of the
workspace, sway would crash.
The workspace's fullscreen pointer is unset when the fullscreen
container is detached and applied again when added to a parent, but in
this case the parent hadn't yet been added to the workspace which meant
con->workspace was NULL.
The fix makes container_handle_fullscreen_reparent return if there's no
workspace, and the fullscreen pointer is reapplied in
workspace_wrap_children.
Fixes#2401 (aka #2558)
Previously, when switching windows, pointer focus was not changed until the pointer was moved. This makes the pointer enter happen immediately, without the side effects of other attempted fixes.
This does the following:
* Adds a baseline argument to get_text_size (the baseline is the
distance from the top of the texture to the baseline).
* Stores the baseline in the container when calculating the title
height.
* Takes the baseline into account when calculating the config's max font
height.
* When rendering, pads the textures according to the baseline so they
line up.
To reproduce the problem this is fixing, create H[view view view],
fullscreen one of the views and close it. The entire workspace will be
given focus rather than one of the siblings.
This happens because we emit the destroy event, so the seat code tries
to find a new focus, but the view it finds is still believed to be
hidden by the fullscreen view so it's discarded and the workspace is
used instead.
This clears the workspace's fullscreen pointer prior to emitting the
destroy event so that the seat code finds an appropriate new focus.
These are the same as seat_set_focus, but accept a specific type rather
than using nodes. Doing this adds more typesafety and lets us avoid
using &con->node which looks a little ugly.
This fixes a crash that pretty much nobody would ever come across. If
you have a bindsym for "focus" with no arguments and run it from an
empty workspace, sway would crash because it assumes `container` is not
NULL.
Prior to f5b9815128, children of tabbed
and stacked containers would have their container size and position set
to the same as the tabbed/stacked container. Normally this would be a
problem for a layout such as T[V[view]], but there was some code in the
arrange functions which would check if the grandparent of the view was a
tabbed or stacked container and would offset the view's Y accordingly.
Commit f5b9815128 changed the box to
exclude the titlebar for all tabbed/stacked children so that the
grandparent check could be removed. But this meant the title was not
covered in the container and wasn't damaged when the child changed its
title.
This patch changes it so that a child of a tabbed/stacked container will
have its box include the title bar if the child is a view, but not if
it's a layout container. This fixes the title damage issue while
avoiding the grandparent check in the arrange functions, and matches
what we see visually.
* Was crashing when a view was moved to the scratchpad (prev focus had
no parent).
* Was crashing when a hidden scratchpad view unmaps because it has no
workspace.
This commit changes the meaning of sway_container so that it only refers
to layout containers and view containers. Workspaces, outputs and the
root are no longer known as containers. Instead, root, outputs,
workspaces and containers are all a type of node, and containers come in
two types: layout containers and view containers.
In addition to the above, this implements type safe variables. This
means we use specific types such as sway_output and sway_workspace
instead of generic containers or nodes. However, it's worth noting that
in a few places places (eg. seat focus and transactions) referring to
them in a generic way is unavoidable which is why we still use nodes in
some places.
If you want a TL;DR, look at node.h, as well as the struct definitions
for root, output, workspace and container. Note that sway_output now
contains a workspaces list, and workspaces now contain a tiling and
floating list, and containers now contain a pointer back to the
workspace.
There are now functions for seat_get_focused_workspace and
seat_get_focused_container. The latter will return NULL if a workspace
itself is focused. Most other seat functions like seat_get_focus and
seat_set_focus now accept and return nodes.
In the config->handler_context struct, current_container has been
replaced with three pointers: node, container and workspace. node is the
same as what current_container was, while workspace is the workspace
that the node resides on and container is the actual container, which
may be NULL if a workspace itself is focused.
The global root_container variable has been replaced with one simply
called root, which is a pointer to the sway_root instance.
The way outputs are created, enabled, disabled and destroyed has
changed. Previously we'd wrap the sway_output in a container when it is
enabled, but as we don't have containers any more it needs a different
approach. The output_create and output_destroy functions previously
created/destroyed the container, but now they create/destroy the
sway_output. There is a new function output_disable to disable an output
without destroying it.
Containers have a new view property. If this is populated then the
container is a view container, otherwise it's a layout container. Like
before, this property is immutable for the life of the container.
Containers have both a `sway_container *parent` and
`sway_workspace *workspace`. As we use specific types now, parent cannot
point to a workspace so it'll be NULL for containers which are direct
children of the workspace. The workspace property is set for all
containers, except those which are hidden in the scratchpad as they have
no workspace.
In some cases we need to refer to workspaces in a container-like way.
For example, workspaces have layout and children, but when using
specific types this makes it difficult. Likewise, it's difficult for a
container to get its parent's layout when the parent could be another
container or a workspace. To make it easier, some helper functions have
been created: container_parent_layout and container_get_siblings.
container_remove_child has been renamed to container_detach and
container_replace_child has been renamed to container_replace.
`container_handle_fullscreen_reparent(con, old_parent)` has had the
old_parent removed. We now unfullscreen the workspace when detaching the
container, so this function is simplified and only needs one argument
now.
container_notify_subtree_changed has been renamed to
container_update_representation. This is more descriptive of its
purpose. I also wanted to be able to call it with whatever container was
changed rather than the container's parent, which makes bubbling up to
the workspace easier.
There are now state structs per node thing. ie. sway_output_state,
sway_workspace_state and sway_container_state.
The focus, move and layout commands have been completely refactored to
work with the specific types. I considered making these a separate PR,
but I'd be backporting my changes only to replace them again, and it's
easier just to test everything at once.
* In layout command, arrange parent of parent - not sure why this is
needed but it is
* Remove gap adjustment when rendering
* Workspace should use outer gaps, not inner
* Add exceptions for tabbed and stacked containers
* Don't mess with gap state when splitting a container
This commit changes the arrange code in a way that will support type
safe arguments.
The arrange_output et al functions are now public, however I opted not
to use them directly yet. I've kept the generic arrange_windows there
for convenience until type safety is fully implemented. This means this
patch has much less risk of breaking things as it would otherwise.
To be type safe, arrange_children_of cannot exist in its previous form
because the thing passed to it could be either a workspace or a
container. So it's now renamed to arrange_children and accepts a list_t,
as well as the parent layout and parent's box.
There was some code which checked the grandparent's layout to see if it
was tabbed or stacked and adjusted the Y offset of the grandchild
accordingly. Accessing the grandparent layout isn't easy when using type
safe arguments, and it seemed odd to even need to do this. I determined
that this was needed because a child of a tabbed container would have a
swayc Y matching the top of the tab bar. I've changed this so a child of
a tabbed container will have a swayc Y matching the bottom of the tab
bar, which means we don't need to access the grandparent layout. Some
tweaks to the rendering and autoconfigure code have been made to
implement this, and the container_at code appears to work without
needing any changes.
arrange_children_of (now arrange_children) would check if the parent had
gaps and would copy them to the child, effectively making the
workspace's gaps recurse into all children. We can't do this any more
without passing has_gaps, gaps_inner and gaps_outer as arguments to
arrange_children, so I've changed the add_gaps function to retrieve it
from the workspace directly.
apply_tabbed_or_stacked_layout has been split into two functions, as it
had different logic depending on the layout.
Lastly, arrange.h had an unnecessary include of transaction.h. I've
removed it, which means I've had to add it to several other files.
When we have type safety we'll need to have functions for
workspace_add_tiling and so on. This means the existing container
functions will be just for containers, so they are being moved to
container.c. At this point layout.c doesn't contain much else, so I've
relocated everything and removed the file.
* container_swap and its static functions have been moved to the swap
command and made static.
* container_recursive_resize has been moved to the resize command and
made static.
* The following have been moved to container.c:
* container_handle_fullscreen_reparent
* container_insert_child
* container_add_sibling
* container_add_child
* container_remove_child
* container_replace_child
* container_split
* enum movement_direction and sway_dir_to_wlr have been moved to util.c.
Side note: Several commands included layout.h which then included
root.h. With layout.h gone, root.h has to be included by those commands.
This list includes disabled outputs.
When sway_container is demoted, we'll need to store the root's children
(ie. enabled outputs) in the sway_root. It makes sense to put these in a
list called `outputs`, so I'm renaming the existing list in advance.
* container_move is only called from the move command
* container_move_to was called from both the move command and the sticky
command, but the sticky command can easily not call it
* container_get_in_direction is only called from the focus command
Moving these functions to their respective commands gives better
separation of code and removes bloat from layout.c. These functions will
need to be refactored to take advantage of type safety, so separating
them will make this easier to refactor.
The following static functions have also been moved:
* is_parellel
* invert_movement
* move_offs
* container_limit
* workspace_rejigger
* move_out_of_tabs_stacks
* get_swayc_in_output_direction
They were all used by the move functions, except for the last one which
is used by focus.
Other changes:
* index_child has been renamed to container_sibling_index, moved to
container.c and made public
* sway_output_from_wlr has been renamed to output_from_wlr_output, moved
to output.c and made public
* container_handle_fullscreen_reparent has been made public
* sway_dir_to_wlr has been made public
No changes have been made to any of the moved functions, other than
updating calls to functions that have been renamed.
This changes the destroy functions to the following:
* output_begin_destroy
* output_destroy
* workspace_begin_destroy
* workspace_destroy
* container_begin_destroy
* container_destroy
* view_begin_destroy
* view_destroy
The terminology was `destroy` and `free`, and it has been changed to
`begin_destroy` and `destroy` respectively.
When the last output is disconnected, its workspaces will now be stashed
in the root. Upon connection of a new output they will be restored.
There is a new function `workspace_consider_destroy` which decides
whether the given workspace should be destroyed or not (ie. empty and
not visible).
Calling container_begin_destroy will no longer automatically reap the
parents. In some places we want to reap the parents and in some we
don't, so this is left to the caller.
container_reap_empty_recursive and container_reap_empty have been
combined into one function and it will recurse up the tree.
When a workspace is moved to another output, or the output it's on
changes its global layout position, the floating containers on that
workspace should be translated by the same amount as the workspace. This
keeps the floating containers in the same position relative to the
workspace.
A check is done to make sure the floating container's center point isn't
being moved off screen. If it is, it is centered within the workspace.
Fixes part of #2500.
Improves upon 18e425ed by using the first assigned workspace instead of
the last one. The order isn't explicitly guaranteed to be the same as in
the config, but in general works.
Fixes#2490.
To be honest I'm not sure why this fixes the issue.
I observed that I could only make the view jump if I resized it to the
smallest possible size first. Then I had a suspicion that we were
accidentally factoring in the title and border sizes into the view size
when it uses CSD. So I changed that and it appears to have fixed the
jumping issue.
I guess when we factor the title and borders in, we send a configure to
the surface with a size smaller than the minimum, and it comes back with
a surface at the minimum size. We interpret this as an unexpected
resize, and this somehow makes it jump.
Previously we used a reparent event to detect when a view changes
parent, then sent an output enter/leave to the surfaces if needed. This
worked for tiling views but not floating views, as floating views can
intersect another output without changing parent.
The solution implemented for floating views also applies cleanly to
tiling views, so the previous method has been completely replaced and
the reparent event has been removed.
This introduces a new function container_discover_outputs. This function
compares the container's `current` position to the outputs, sends enter
and leave events as needed, and keeps track of which outputs it's
intersecting in a new `container->outputs` list. If it has entered a new
output with a different scale then the title and marks textures will
also be recreated at the new scale.
The function is called when a transaction applies. This is convenient as
it means we don't have to call it from various places.
There is imperfect rendering when a floating view overlaps two outputs
with different scales. It renders correctly for the most recently
entered output, but there is only one title texture so it renders
incorrectly on the old output.
Fixes#2482
Workspaces previously had a magical `workspace->floating` container,
which had a layout of L_FLOATING and whose children were actual floating
views. This allowed some conveniences, but was a hacky solution because
the container has to be exempt from focus, coordinate transactions with
the workspace, and omit emitting IPC events (which we didn't do).
This commit changes it to be a list directly in the sway_workspace. The
L_FLOATING layout is no longer used so this has been removed as well.
* Fixes incorrect check in the swap command (it checked if the
containers had the L_FLOATING layout, but this layout applied to the
magical container).
* Introduces workspace_add_floating
This introduces the following `for_each` functions:
* root_for_each_workspace
* root_for_each_container
* output_for_each_workspace
* output_for_each_container
* workspace_for_each_container
And introduces the following `find` functions:
* root_find_output
* root_find_workspace
* root_find_container
* output_find_workspace
* output_find_container
* workspace_find_container
* container_find_child
And removes the following functions:
* container_descendants
* container_for_each_descendant
* container_find
This change is preparing the way for demoting sway_container. Eventually
these functions will accept and return sway_outputs, sway_workspaces and
sway_containers (meaning a C_CONTAINER or C_VIEW).
This change also makes it easy to handle abnormalities like the
workspace floating list, root's scratchpad list and (once implemented)
root's saved workspaces list for when there's no connected outputs.
This commit renames container_sort_workspaces to output_sort_workspaces
and moves it to output.c.
This also renames container_wrap_children to workspace_wrap_children and
moves it to workspace.c. This function is only called with workspaces.
The original purpose of this commit is to replace some for loops with
list_find. But while doing this I found the workspace_prev_next_impl
functions to be difficult to read and also contained a bug, so I
refactored them and fixed the bug.
To reproduce the bug:
* Have two outputs, where the left output has workspaces 1, 2, 3 and the
right output has workspaces 4, 5, 6. Make workspace 2 focused_inactive
and workspace 4 focused.
* Run `workspace prev`.
* Previously it would visit the left output, then apply `workspace prev`
to workspace 2, which focuses workspace 1.
* Now it will focus the rightmost workspace on the left output
(workspace 3).
The refactoring I made to the workspace functions are:
* Added the static keyword.
* They now accept an int dir rather than bool, to avoid an unnecessary
conversion.
* Rather than preparing start and end variables for the purpose of
iterating, just iterate everything.
* Replace for loops with list_find.
* Don't call workspace_output_prev_next_impl (this fixes the bug).
Commit 4b8e3a885b makes it so only one
transaction is committed (ie. configures sent) at a time. This commit
removes the now-unnecessary code which was used to support concurrent
committed transactions.
* Instead of containers storing a list of instructions which they've
been sent, it now stores a single instruction.
* Containers now have an ntxnrefs property. Previously we knew how many
references there were by the length of the instruction list.
* Instructions no longer need a ready property. It was used to avoid
marking an instruction ready twice when they were in a list, but this is
now avoided because there is only one instruction and we nullify the
container->instruction pointer when it's ready.
* When a transaction applies, we no longer need to consider releasing
and resaving the surface, as we know there are no other committed
transactions.
* transaction_notify_view_ready has been renamed to
view_notify_view_ready_by_serial to make it consistent with
transaction_notify_view_ready_by_size.
* Out-of-memory checks have been added when creating transactions and
instructions.
Rationale: Sticky containers are always assigned to the visible
workspace.
The basic idea here is to check the destination's output (move.c:190).
But if the command was `move container to workspace x` then a workspace
might have been created for it. We could destroy the workspace in this
case, but that results in unnecessary IPC events.
To avoid this, the logic for `move container to workspace x` has been
adjusted. It now delays creating the workspace until the end, and uses
`workspace_get_initial_output` to determine and check the output before
creating it.
* Removes container_floating_move_to_container, instead opting to put
that logic in container_move_to
* In the seat code, focusing a floating view now updates the pending
state only and lets the next transaction carry it over to the current
state. This is required, otherwise it would crash.
* When unfullscreening a floating container, an output check is now done
to see if it should center it.
In a multi-output setup, if a sticky container is on one output and
focus is on the other output, and you run (eg) `workspace 1` to focus
the workspace containing the sticky container, an infinite loop would
occur. It would loop infinitely because it would remove the sticky
container from the workspace, add it back to the same workspace, and
then decrement the iterator variable.
The fix just wraps the loop in a workspace comparison.
container_move_to handled moving containers to new parents, as well as
moving workspaces to new outputs.
This commit removes the workspace-moving code from this function and
introduces workspace_move_to_output. Moving workspaces using
container_move_to only happened from the move command, so it's been
implemented as a static function in that file.
Simplifying container_move_to makes it easier for me to fix some issues
in #2420.
I've got the following SIGSEGV when terminating sway:
```
Program terminated with signal SIGSEGV, Segmentation fault.
0x00005607dc603af5 in view_unmap (view=0x5607dcb3d350) at ../sway/tree/view.c:599
599 if (surviving_ancestor->type >= C_WORKSPACE) {
```
surviving_ancestor was NULL at that time
This commit is trying to fix this problem.
This creates a root.c and moves bits and pieces from elsewhere into it.
* layout_init has been renamed to root_create and moved into root.c
* root_destroy has been created and is called on shutdown
* scratchpad code has been moved into root.c, because hidden scratchpad
containers are stored in the root struct
Calling container_at_view fails an assertion if the container isn't a
view. Calling tiling_container_at works correctly, as that function
checks if the container is a view and calls container_at_view if so.
When a view unmaps, normally the surviving ancestor (ie. after reaping)
needs to be arranged. When a fullscreen view unmaps, it arranges the
workspace rather than the surviving ancestor, but didn't handle cases
where the workspace itself was reaped. This happens if the workspace is
not currently shown and the fullscreen view was the last container on
that workspace.
This commit rewrites this part of view_unmap so it's more readable, and
fixes the crash by not arranging the workspace if it's been reaped. Note
that it no longer arranges the output under any circumstance - this
wasn't required anyway.
* seat_set_focus_warp lacked a container NULL check
* view mapping code needs to use seat_get_focus_inactive
Also, seat_set_focus_warp triggered the wrong IPC event if focus was a
workspace, which resulted in swaybar not showing the workspace as
active.
When a container is moved from, say, workspace 1 to workspace 2, workspace 2 is focused in order to arrange the windows before focus is moved back to workspace 1, which caused a workspace:focus event from workspace 2 to workspace 1 to be emitted. This commit inhibits that event.
Fixes#2364.
Suppose a view is 600px wide, and we tell it to resize to 601px during a
resize operation. We create a transaction, save the 600px buffer and
send the configure. This buffer is saved into the associated
instruction, and is rendered while we wait for the view to commit a
601px buffer.
Before the view commits the 601px buffer, suppose we tell it to resize
to 602px. The new transaction will also save the buffer, but it's still
the 600px buffer because we haven't received a new one yet.
Then suppose the view commits its original 601px buffer. This completes
the first transaction, so we apply the 601px width to the container.
There's still the second (now only) transaction remaining, so we render
the saved buffer from that. But this is still the 600px buffer, and we
believe it's 601px. Whoops.
The problem here is we can't stack buffers like this. So this commit
removes the saved buffer from the instructions, places it in the view
instead, and re-saves the latest buffer every time the view completes a
transaction and still has further pending transactions.
As saved buffers are now specific to views rather than instructions, the
functions for saving and removing the saved buffer have been moved to
view.c.
The calls to save and restore the buffer have been relocated to more
appropriate functions too, favouring transaction_commit and
transaction_apply rather than transaction_add_container and
transaction_destroy.
Fixes the render and container_at order for popups.
Fixes#2210
For rendering:
* render_view_surfaces has been renamed to render_view_toplevels
* render_view_toplevels now uses output_surface_for_each_surface (which
is now public), as that function uses wlr_surface_for_each_surface which
doesn't descend into popups
* Views now have a for_each_popup iterator, which is used by the
renderer to render the focused view's popups
* When rendering a popup, toplevels (xdg subsurfaces) of that popup are
also rendered
For sending frame done, the logic has been updated to match the
rendering logic:
* send_frame_done_container no longer descends into popups
* for_each_popup is used to send frame done to the focused view's popups
and their child toplevels
For container_at:
* floating_container_at is now static, which means it had to be moved
higher in the file.
* container_at now considers popups for the focused view before checking
containers.
* tiling_container_at has been introduced, so that it doesn't call
container_at recursively (it would check popups recursively if it did)
Example config that produces the crash (with a single output):
workspace 1
workspace 2
Prior to this commit, container_workspace_free would manually mark the
L_FLOATING container as destroying and free it. This assumed the
L_FLOATING container would never be involved in a transaction. This was
a safe assumption when it was implemented, but became an incorrect
assumption once parent/child relationships became transactionised.
This commit removes the L_FLOATING free from container_workspace_free.
When the workspace is destroyed, it starts the normal destroy process on
the L_FLOATING container so it can be freed via transactions.
Also fixes a crash when unfloating a window. It needs to add it back to
the tiling tree as a sibling rather than a child, because the reference
container might be a view.
This introduces seat_get_focus_inactive_tiling and updates
`focus mode_toggle` to use it instead, because the previous method
wasn't guaranteed to return a tiling view.
Things worth noting:
* When a fullscreen view unmaps, the check to unset fullscreen on the
workspace has been moved out of view_unmap and into container_destroy,
because containers can be fullscreen too
* The calls to `container_reap_empty_recursive(workspace)` have been
removed from `container_set_floating`. That function reaps upwards so it
wouldn't do anything. I'm probably the one who originally added it...
* My fix (b14bd1b0b1) for the tabbed child
crash has a side effect where when you close a floating container, focus
is not given to the tiled container again. I've removed my fix and
removed the call to `send_cursor_motion` from `seat_set_focus_warp`. We
should consider calling it from somewhere earlier in the call stack.
* Move workspace selection into separate function
* Instead of keeping a `prev_focus` variable, do the check in
`should_focus` (ie. views can only take focus if they're mapped into the
active workspace)
* Fix assign-to-output - it previously set `prev_focus` but should be
`target_sibling`
* Remove call to `workspace_switch` as we'll only ever focus the view if
it's in the active workspace
when using 2 display, if scaling is different
`container_update_textures_recursive` is called when moving workspace on
different display.
We need to call `container_update_title_textures` only for container of type
"CONTAINER" or "VIEW" in order to be consistent with the assert in
`update_title_texture`.
Implements the following commands:
* move scratchpad
* scratchpad show
* [criteria] scratchpad show
Also fixes these:
* Fix memory leak when executing command with criteria
(use `list_free(views)` instead of `free(views)`)
* Fix crash when running `move to` with no further arguments
This implements the following:
* `floating_modifier` configuration directive
* Drag a floating window by its title bar
* Hold mod + drag a floating window from anywhere
* Resize a floating view by dragging the border
* Resize a floating view by holding mod and right clicking anywhere on
the view
* Resize a floating view and keep aspect ratio by holding shift while
resizing using either method
* Mouse cursor turns into resize when hovering floating border or corner
When an xwayland view is mapped, the IPC urgent event was being sent on
every surface commit.
I had intentionally ommitted the check because I figured an urgent
surface could update its urgent timestamp by sending urgent a second
time. But that's not how it works in xwayland's case, and it makes for
more complicated code.
Ryan Dwyer
emersion
minus
Jonathan Buch
Drew DeVault
Brian Ashworth
Arkadiusz Hiler
Ian Fan
Geoff Greer
William Wold
sghctoma
Ryan Dwyer
Donnie West
Brian Ashworth
Mariusz Bialonczyk
Mihai Coman
Cédric Cabessa
Pascal Pascher
Pascal Pascher
frsfnrrg