Some wayland clients (mostly GTK3 apps) like eog or evince support
gestures like pinch-to-zoom. These gestures are given to clients
via the pointer_gestures_v1 protocol. This is already supported in
wlroots, so we just need to hook up the events here in sway.
Fixes#4724
Sway has basic support for drawing tablets, but does not expose
properties such as pressure sensitivity. This implements the wlr tablet
v2 protocol, providing tablet events to Wayland clients.
This just adds a small quality of life improvement to the cursor hiding
functionality. The cursor will no longer be hidden unless all buttons
are released.
This introduces a `default` seat operation which is used when no mouse
buttons are being held. This means there is now always a seat operation
in progress. It allows us to separate `default` code from the standard
cursor management code.
The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and
`end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are
only used by the default seatop. `end` is called when a seatop is being
replaced by another one and allows the seatop to free any resources,
though no seatop currently needs to do this. `finish` is no longer
required, as each seatop can gracefully finish in their `button`
callback. And `abort` is not needed, as calling `end` would achieve the
same thing. The struct has also gained a bool named allow_set_cursor
which allows the client to set a new cursor during `default` and `down`
seatops.
Seatops would previously store which button they were started with and
stop when that button was released. This behaviour is changed so that it
only ends once all buttons are released. So you can start a drag with
$mod+left, then click and hold right, release left and it'll continue
dragging while the right button is held.
The motion callback now accepts dx and dy. Most seatops don't use this
as they store the cursor position when the seatop is started and compare
it with the current cursor position. This approach doesn't make sense
for the default seatop though, hence why dx and dy are needed.
The pressed_buttons array has been moved from the sway_cursor struct to
the default seatop's data. This is only used for the default seatop to
check bindings. The total pressed button count remains in the
sway_cursor struct though, because all the other seatops check it to
know if they should end.
The `down` seatop no longer has a `moved` property. This was used to
track if the cursor moved and to recheck focus_follows_mouse, but seems
to work without it.
The logic for focus_follows_mouse has been refactored. As part of this
I've removed the call to wlr_seat_keyboard_has_grab as we don't appear
to use keyboard grabs.
The functions for handling relative motion, absolute motion and tool
axis have been changed. Previously the handler functions were
handle_cursor_motion, handle_cursor_motion_absolute and
handle_tool_axis. The latter two both called cursor_motion_absolute.
Both handle_cursor_motion and cursor_motion_absolute did very similar
things. These are now simplified into three handlers and a single common
function called cursor_motion. All three handlers call cursor_motion. As
cursor_motion works with relative distances, the absolute and tool axis
handlers convert them to relative first.
By the time seatop_allows_events was called, seatop_impl was already
NULL, causing the function to always return false. This means a press
event was sent to clients without a corresponding release event.
This patch moves the call to seatop_finish to after the
seatop_allows_events check.
It turns out sending button events during all seat operations is not
desirable. This patch introduces a new property
`seatop_impl.allows_events` which allows each operation to define
whether button events should be passed to the surface or not.
The `down` seat operation is the only one that supports this. As all the
other seatops don't support it, the calls to seat_pointer_notify_button
prior to starting them have been removed.
If two cursor buttons are pressed at the same time, the client will now
be notified of the second button press.
The main reason for not sending the concurrent presses was due to an
early return in dispatch_cursor_button if a seatop is in progress. This
patch makes it call seat_pointer_notify_button prior to returning. But
it also has to make sure there's not a mismatch in events such as a
release without a press.
Prior to this patch, the down seatop would send press and release events
in its begin and finish functions. No other seatops did this. A press
event would be sent prior to starting tiling drag, but never an
associated release.
After this patch, no seatops send their own press or release events. We
send them prior to calling the seatop begin functions, then the first
part of dispatch_cursor_button handles all presses during seatops and
when releasing the seatop.
All seat operations except "down" eat the button pressed event and don't send
it to clients. Thus, when ending such seat operations we shouldn't send the
button released event.
This commit moves the logic used to send pressed/released into the "down"
operation.
This modifies the places where output_get_active_workspace is called to
handle a NULL result. Some places already handled it and did not need a
change, some just have guard off code blocks, others return errors, and
some have sway_asserts since the case should never happen. A lot of this
is probably just safety precautions since they probably will never be
called when `output_get_active_workspace` is not fully configured with a
workspace.
In handle_cursor_motion, the timestamp passed to
`wlr_relative_pointer_manager_v1_send_relative_motion` should be
microseconds (not milliseconds) according to relative-pointer-v1 spec.
This changes the `pointer_constraint` command to be a subcommand of seat
to allow for per-seat settings. The current implementation that is not a
seat subcommand will only operate on the current seat and will segfault
in the config due to `config->handler_context.seat` only being set at
runtime.
This also allows for the wildcard identifier to be used to alter the
pointer constraint settings on all seats and allows for the setting to
be merged with the rest of the seat config.
This commit mostly duplicates the wlr_log functions, although
with a sway_* prefix. (This is very similar to PR #2009.)
However, the logging function no longer needs to be replaceable,
so sway_log_init's second argument is used to set the exit
callback for sway_abort.
wlr_log_init is still invoked in sway/main.c
This commit makes it easier to remove the wlroots dependency for
the helper programs swaymsg, swaybg, swaybar, and swaynag.
Designing the output configuration sequence without invalid state is tricky.
We have one function, apply_output_config, that takes an output and (besides
other things) performs a modeset and inserts the output in the output layout.
The modeset can fail, in which case we don't want the output to be enabled.
We also have an output_enable function, which calls output_apply_config and
also configures the output's workspace and inserts it in the root container.
Now, we have two choices.
Either we configure the output before it's been inserted in the root container
and then, if the modeset was successful, we insert it and create the workspace.
The main issue with this approach is that configuring the output triggers a
handful of signals, namely wlr_output.mode and wlr_output_layout.change. In
those event handlers, we need to make sure to ignore these outputs in the
process of being configured.
Either we first insert the output, create the workspace and then try to
configure it. It means we need to undo everything if the modeset fails. The
main issue with this solution is that it enables and disables the output very
quickly, creates a workspace and immediately destroys it, and maybe moves
views back and forth (see output_evacuate).
I've tried to make it so an output isn't enabled then immediately disabled. We
already have code for ignoring outputs when the output is being destructed.
Fixes https://github.com/swaywm/sway/issues/3462
This modifies `bar_cmd_tray_bindsym` to use `get_mouse_bindsym` for
parsing mouse buttons. This also introduces `bar_cmd_tray_bindcode`,
which will use `get_mouse_bindcode` for parsing mouse buttons. Like with
sway bindings, the two commands are encapsulated in a single file to
maximize shared code.
This also modifies tray bindings to work off of events codes rather than
x11 buttons, which allows for any mouse buttons to be used.
For `get_bar_config`, `event_code` has been added to the `tray_bindings`
section and will include to event code for the button. If the event code
can be mapped to a x11 button, `input_code` will still be the x11 button
number. Otherwise, `input_code` will be `0`.
Clear the focus when we hide the cursor and show it again during the unhide
action. The unhide function will rebase the cursor after the unhide.
Tested by looking at the WAYLAND_DEBUG=1 output of termite.
Also call cursor_handle_activity before sending pointer events to send the enter
events to the surface if the cursor was hidden before.
Fixes#3431
This modifies `input_cmd_scroll_button` to utilize the mouse button
helper `get_mouse_button` when parsing the button. x11 axis buttons are
not supported with this command and `CMD_INVALID` will be returned, but
all other x11 buttons, button event names, and button event codes should
be working
This modifies `seat_cmd_cursor` to utilize `get_mouse_button` when
parsing mouse buttons for the `press` and `release` operations. All x11
buttons, button event names, and button event codes are supported.
For x11 axis buttons, `dispatch_cursor_axis` is used instead of
`dispatch_cursor_button`. However the `press`/`release` state is ignored
and the either axis event is processed. This also removes support for
`left` and `right` in favor of `BTN_LEFT` and `BTN_RIGHT`.
This splits each seat operation (drag/move tiling/floating etc) into a
separate file and introduces a struct sway_seatop_impl to abstract the
operation.
The move_tiling_threshold operation has been merged into move_tiling.
The main logic for each operation is untouched aside from variable
renames.
The following previously-static functions have been made public:
* node_at_coords
* container_raise_floating
* render_rect
* premultiply_alpha
* scale_box
This fixes two causes of segfaulting when an output is destroyed.
The first occurred when an output was never enabled. The issue was that
the destroy signal was never initialized so when it was emitted, sway
segfaulted. This was fixed by moving the initialization into
`output_create` since all outputs, regardless of whether they have ever
been enabled, will be destroyed at some point.
The second occurred when the cursor was on an output that was being
destroyed. The sway output would have already been removed, but if there
are other outputs, a cursor rebase would still occur. Since the
wlr_output still existed and the sway output was destroyed, the cursor
could be over nothing, resulting in a segfault when trying to get the
sway output, which was destroyed.
This allows tabbed and stacked containers to be scrolled through when
the cursor is over the border of the title bar. The borders around the
other three edges of the contents should not be affected by this change.
The following helper functions have been added to aid with parsing mouse
buttons from a string:
1. `get_mouse_bindsym`: attempts to parse the string as an x11 button
(button[1-9]) or as an event name (ex BTN_LEFT or BTN_SIDE)
2. `get_mouse_bindcode`: attempts to parse the string as an event code
and validates that the event code is a button (starts with `BTN_`).
3. `get_mouse_button`: this is a conveniency function for callers that
do not care whether a bindsym or bindcode are used and attempts to parse
the string as a bindsym and then bindcode.
None of these functions are used in this commit. The sole purpose of
this commit is to make the larger set more granular and easier to
review/manipulate. There will be a series of commits following this one
that will modify any command which uses a mouse button to use these
helpers.
evdev-proto is installed by a dependency, so some files have been missed:
In file included from ../sway/input/cursor.c:3:
/usr/local/include/libevdev-1.0/libevdev/libevdev.h:30:10: fatal error: 'linux/input.h' file not found
#include <linux/input.h>
^~~~~~~~~~~~~~~
../swaybar/i3bar.c:3:10: fatal error: 'linux/input-event-codes.h' file not found
#include <linux/input-event-codes.h>
^~~~~~~~~~~~~~~~~~~~~~~~~~~
Implements `tiling_drag_threshold <threshold>` to prevent accidental
dragging of tiling containers. If a container (and all of its
descendants) are unfocused and the tile bar is pressed, a threshold
will be used before actually starting the drag. Once the threshold has
been exceeded, the cursor will change to the grab icon and the operation
will switch from `OP_MOVE_TILING_THRESHOLD` to `OP_MOVE_TILING`.
This fixes a bug in `dispatch_cursor_button` where if there was an
operation occurring, the button would not be removed from the state on
release. This resulted in the button appearing to be permanently pressed
and caused mouse bindings to not match correctly.
This modifies the way mouse bindings are parsed. Instead of adding to
BTN_LEFT, which results in button numbers that may not be expected,
buttons will be parsed in one of the following ways:
1. `button[1-9]` will now map to their x11 equivalents. This is already
the case for bar bindings. This adds support for binding to axis events,
which was not possible in the previous approach.
2. Anything that starts with `BTN_` will be parsed as an event code name
using `libevdev_event_code_from_name`. This allows for any button to be
mapped to instead of limiting usage to the ones near BTN_LEFT. This also
adds a dependency on libevdev, but since libevdev is already a dependency
of libinput, this should be fine. If needed, this option can have dependency
guards added.
Binding changes:
- button1: BTN_LEFT -> BTN_LEFT
- button2: BTN_RIGHT -> BTN_MIDDLE
- button3: BTN_MIDDLE -> BTN_RIGHT
- button4: BTN_SIDE -> SWAY_SCROLL_UP
- button5: BTN_EXTRA -> SWAY_SCROLL_DOWN
- button6: BTN_FORWARD -> SWAY_SCROLL_LEFT
- button7: BTN_BACK -> SWAY_SCROLL_RIGHT
- button8: BTN_TASK -> BTN_SIDE
- button9: BTN_JOYSTICK -> BTN_EXTRA
Since the axis events need to be mapped to an event code, this uses the
following mappings to avoid any conflicts:
- SWAY_SCROLL_UP: KEY_MAX + 1
- SWAY_SCROLL_DOWN: KEY_MAX + 2
- SWAY_SCROLL_LEFT: KEY_MAX + 3
- SWAY_SCROLL_RIGHT: KEY_MAX + 4
Enables titling views to be dragged by the titlebar. This is in addition
to using the modifier and dragging them from anywhere on the container
surface. Floating views already allow this behavior.
This renames/moves the following properties:
* sway_view.{x,y,width,height} ->
sway_container.content_{x,y,width,height}
* This is required to support placeholder containers as they don't
have a view.
* sway_container_state.view_{x,y,width,height} ->
sway_container_state.content_{x,y,width,height}
* To remain consistent with the above.
* sway_container_state.con_{x,y,width,height} ->
sway_container_state.{x,y,width,height}
* The con prefix was there to give it contrast from the view
properties, and is no longer useful.
The function container_set_geometry_from_floating_view has also been
renamed to container_set_geometry_from_content.
For example, create layout H[view T[view view view]], focus the view in
the hsplit and scroll the mouse wheel over the tab title bars. Prior to
this patch, focus would be given to a descendant of the tabbed
container. This patch keeps the focus on the hsplit view.
This also renames some of the variables used in this part of the code to
make it be easier to follow.
The cursor's image would be removed or set when the seat's capabilities
were updated, but there was nothing to prevent the image from being set
at other times.
The input manager is a singleton object. Passing the sway_input_manager
argument to each of its functions is unnecessary, while removing the
argument makes it obvious to the caller that it's a singleton. This
patch removes the argument and makes the input manager use server.input
instead.
On a similar note:
* sway_input_manager.server is removed in favour of using the server
global.
* seat.input is removed because it can get it from server.input.
Due to a circular dependency, creating seat0 is now done directly in
server_init rather than in input_manager_create. This is because
creating seats must be done after server.input is set.
Lastly, it now stores the default seat name using a constant and removes
a second reference to seat0 (in input_manager_get_default_seat).
Because cursor warping was the default behaviour in seat_set_focus,
there may be cases where we may have been warping the cursor
unintentionally. This patch removes cursor warping from seat_set_focus
and only does it in the focus command. This is managed by a static
function in focus.c.
To know whether to warp or not, we need to know which node had focus
previously. To keep track of this easily, seat->prev_focus has been
introduced and is set to the previous in seat_set_focus.
The new functions allow a cursor to be warped without changing the focus.
This is a preparation commit to handle cursor warping not only in
seat_set_focus_warp.
This introduces seat_set_raw_focus: a function that manipulates the
focus stack without doing any other behaviour whatsoever. There are a
few places where this is useful, such as where we set focus_inactive
followed by another call to set the real focus again. With this change,
the notify argument to seat_set_focus_warp is also removed as these
cases now use the raw function instead.
A bonus of this is we are no longer emitting window::focus IPC events
when setting focus_inactive, nor are we sending focus/unfocus events to
the surface.
This also fixes the following:
* When running `move workspace to output <name>` and moving the last
workspace from the source output, the workspace::focus IPC event is no
longer emitted for the newly created workspace.
* When splitting the currently focused container, unfocus/focus events
will not be sent to the surface when giving focus_inactive to the newly
created parent, and window::focus events will not be emitted.
* Set focus to a floating container when clicking its title bar.
* Raise floating when user clicks title bar or decorations (in the
seat_begin functions).
* In container_at, it only returned a floating container if the user had
clicked the surface. This makes it use floating_container_at instead.
This introduces a new view_impl function: is_transient_for. Similar to
container_has_ancestor but works using the surface parents rather than
the tree.
This patch modifies view_is_visible, container_at and so on to allow
transient views to function normally when they're in front of a
fullscreen view.
* Click and hold a scrollbar
* Drag the cursor onto another surface
* While still holding the original button, press and release another
cursor button
* Things get weird
There's two ways to fix this. Either cancel the seat operation and do
the other click, or continue the seat operation and ignore the other
click. I opted for the latter (ignoring the click) because it's easier
to implement, and I suspect a second click during a seat operation is
probably unintentional anyway.
Re-focus on the container on which the cursor hovers over. A
special case is, if there are menus or other subsurfaces open
in the focused container. It will prefer the focused container
as long as there are subsurfaces.
This commit starts caching the previous node as well as the
previous x/y cursor position. Re-calculating the previous
focused node by looking at the current state of the cursor
position does not work, if the environment changes.
This replaces view.using_csd with a new border mode: B_CSD. This also
removes sway_xdg_shell{_v6}_view.deco_mode and
view->has_client_side_decorations as we can now get these from the
border.
You can use `border toggle` to cycle through the modes including CSD, or
use `border csd` to set it directly. The client must support the
xdg-decoration protocol, and the only client I know of that does is the
example in wlroots.
If the client switches from SSD to CSD without us expecting it (via the
server-decoration protocol), we stash the previous border type into
view.saved_border so we can restore it if the client returns to SSD. I
haven't found a way to test this though.
Firstly, a change had to be made to the container_at functions. If you
create layout `T[view H[view view]]` and hover the second tab, the
container_at functions would return the focus_inactive child. They now
return the split container itself. To compensate for this,
dispatch_cursor_button has been adjusted to find the focus_inactive
child before focusing it.
The actual implementation of wheel scrolling is pretty straightforward.
This uses handle_cursor_axis, so I took a similar approach to
handle_cursor_button (ie. creating a dispatch_cursor_axis function).
* Make container_add_sibling's `after` argument a boolean.
* Use a constant for drop layout border
* Make thickness an int
* Add button state check
* Move comments in seat_end_move_tiling
These are the same as seat_set_focus, but accept a specific type rather
than using nodes. Doing this adds more typesafety and lets us avoid
using &con->node which looks a little ugly.
This fixes a crash that pretty much nobody would ever come across. If
you have a bindsym for "focus" with no arguments and run it from an
empty workspace, sway would crash because it assumes `container` is not
NULL.
This commit changes the meaning of sway_container so that it only refers
to layout containers and view containers. Workspaces, outputs and the
root are no longer known as containers. Instead, root, outputs,
workspaces and containers are all a type of node, and containers come in
two types: layout containers and view containers.
In addition to the above, this implements type safe variables. This
means we use specific types such as sway_output and sway_workspace
instead of generic containers or nodes. However, it's worth noting that
in a few places places (eg. seat focus and transactions) referring to
them in a generic way is unavoidable which is why we still use nodes in
some places.
If you want a TL;DR, look at node.h, as well as the struct definitions
for root, output, workspace and container. Note that sway_output now
contains a workspaces list, and workspaces now contain a tiling and
floating list, and containers now contain a pointer back to the
workspace.
There are now functions for seat_get_focused_workspace and
seat_get_focused_container. The latter will return NULL if a workspace
itself is focused. Most other seat functions like seat_get_focus and
seat_set_focus now accept and return nodes.
In the config->handler_context struct, current_container has been
replaced with three pointers: node, container and workspace. node is the
same as what current_container was, while workspace is the workspace
that the node resides on and container is the actual container, which
may be NULL if a workspace itself is focused.
The global root_container variable has been replaced with one simply
called root, which is a pointer to the sway_root instance.
The way outputs are created, enabled, disabled and destroyed has
changed. Previously we'd wrap the sway_output in a container when it is
enabled, but as we don't have containers any more it needs a different
approach. The output_create and output_destroy functions previously
created/destroyed the container, but now they create/destroy the
sway_output. There is a new function output_disable to disable an output
without destroying it.
Containers have a new view property. If this is populated then the
container is a view container, otherwise it's a layout container. Like
before, this property is immutable for the life of the container.
Containers have both a `sway_container *parent` and
`sway_workspace *workspace`. As we use specific types now, parent cannot
point to a workspace so it'll be NULL for containers which are direct
children of the workspace. The workspace property is set for all
containers, except those which are hidden in the scratchpad as they have
no workspace.
In some cases we need to refer to workspaces in a container-like way.
For example, workspaces have layout and children, but when using
specific types this makes it difficult. Likewise, it's difficult for a
container to get its parent's layout when the parent could be another
container or a workspace. To make it easier, some helper functions have
been created: container_parent_layout and container_get_siblings.
container_remove_child has been renamed to container_detach and
container_replace_child has been renamed to container_replace.
`container_handle_fullscreen_reparent(con, old_parent)` has had the
old_parent removed. We now unfullscreen the workspace when detaching the
container, so this function is simplified and only needs one argument
now.
container_notify_subtree_changed has been renamed to
container_update_representation. This is more descriptive of its
purpose. I also wanted to be able to call it with whatever container was
changed rather than the container's parent, which makes bubbling up to
the workspace easier.
There are now state structs per node thing. ie. sway_output_state,
sway_workspace_state and sway_container_state.
The focus, move and layout commands have been completely refactored to
work with the specific types. I considered making these a separate PR,
but I'd be backporting my changes only to replace them again, and it's
easier just to test everything at once.
When we have type safety we'll need to have functions for
workspace_add_tiling and so on. This means the existing container
functions will be just for containers, so they are being moved to
container.c. At this point layout.c doesn't contain much else, so I've
relocated everything and removed the file.
* container_swap and its static functions have been moved to the swap
command and made static.
* container_recursive_resize has been moved to the resize command and
made static.
* The following have been moved to container.c:
* container_handle_fullscreen_reparent
* container_insert_child
* container_add_sibling
* container_add_child
* container_remove_child
* container_replace_child
* container_split
* enum movement_direction and sway_dir_to_wlr have been moved to util.c.
Side note: Several commands included layout.h which then included
root.h. With layout.h gone, root.h has to be included by those commands.
Benjamin Cheng
John Chadwick
Drew DeVault
Brian Ashworth
Alex Maese
Ryan Dwyer
emersion
Rouven Czerwinski
Vincent Vanlaer
vilhalmer
absrd
Las
M Stoeckl
Ian Fan
Jan Beich
David96
Spencer Michaels
Connor E
mwenzkowski
Jonathan Buch
Arkadiusz Hiler
Alexander Bakker