Expose the panel orientation with wlr_drm_connector_get_panel_orientation.
Leave it to the compositor to consume this information and configure the
output accordingly.
Closes: https://github.com/swaywm/wlroots/issues/1581
Modesets require a buffer. The DRM backend tried to auto-enable
outputs when a CRTC becomes available in the past, but now that
fails because no buffer is available.
Instead of having this magic inside the DRM backend, a better
approach is to do it in the compositor or in an optional helper.
Previously, we were copying wlr_output_state on the stack and
patching it up to be guaranteed to have a proper drmModeModeInfo
stored in it (and not a custom mode). Also, we had a bunch of
helpers deriving DRM-specific information from the generic
wlr_output_state.
Copying the wlr_output_state worked fine so far, but with output
layers we'll be getting a wl_list in there. An empty wl_list stores
two pointers to itself, copying it on the stack blindly results in
infinite loops in wl_list_for_each.
To fix this, rework our DRM backend to stop copying wlr_output_state,
instead add a new struct wlr_drm_connector_state which holds both
the wlr_output_state and additional DRM-specific information.
Using GBM to import DRM dumb buffers tends to not work well. By
using GBM we're calling some driver-specific functions in Mesa.
These functions check whether Mesa can work with the buffer.
Sometimes Mesa has requirements which differ from DRM dumb buffers
and the GBM import will fail (e.g. on amdgpu).
Instead, drop GBM and use drmPrimeFDToHandle directly. But there's
a twist: BO handles are not ref'counted by the kernel and need to
be ref'counted in user-space [1]. libdrm usually performs this
bookkeeping and is used under-the-hood by Mesa.
We can't re-use libdrm for this task without using driver-specific
APIs. So let's just re-implement the ref'counting logic in wlroots.
The wlroots implementation is inspired from amdgpu's in libdrm [2].
Closes: https://github.com/swaywm/wlroots/issues/2916
[1]: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/110
[2]: 1a4c0ec9ae/amdgpu/handle_table.c
The Coordinated Video Timings (CVT) spec [1] defines two types of
timings: the "CVT standard CRT" timings and the "CVT reduced blanking"
timings (see section 3.6).
The standard CRT timings include pauses in the video stream to allow
CRT displays to reposition their electron beam at the end of each
horizontal scan line [2]. While this was desirable a few decades ago,
nowadays we can just generate a CVT reduced blanking timing by default.
wlroots users can still set full custom DRM modes via
wlr_drm_connector_add_mode.
[1]: https://glenwing.github.io/docs/VESA-CVT-1.2.pdf
[2]: https://en.wikipedia.org/wiki/Coordinated_Video_Timings#Reduced_blanking
To retrieve the formats, an allocated crtc is required. If there is no
currently no crtc available, try to allocate it. This reproducable by
having a disabled output and going through a suspend cycle with amdgpu.
On start CRTCs look like this:
00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1099] Reallocating CRTCs
00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1110] State before reallocation:
00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1116] 'DP-1' crtc=0 state=1 desired_enabled=1
00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1116] 'DP-2' crtc=1 state=1 desired_enabled=1
00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1116] 'HDMI-A-1' crtc=-1 state=0 desired_enabled=0
00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1116] 'HDMI-A-2' crtc=-1 state=0 desired_enabled=0
00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1116] 'DVI-D-1' crtc=-1 state=0 desired_enabled=0
00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1167] State after reallocation:
00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1174] 'DP-1' crtc=0 state=1 desired_enabled=1
00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1174] 'DP-2' crtc=1 state=1 desired_enabled=1
00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1174] 'HDMI-A-1' crtc=-1 state=0 desired_enabled=0
00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1174] 'HDMI-A-2' crtc=-1 state=0 desired_enabled=0
00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1174] 'DVI-D-1' crtc=-1 state=0 desired_enabled=0
where DP-1 is than disabled. After suspend/resume, allocation turns into:
00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1099] Reallocating CRTCs
00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1110] State before reallocation:
00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1116] 'DP-1' crtc=-1 state=1 desired_enabled=0
00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1116] 'DP-2' crtc=1 state=3 desired_enabled=1
00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1116] 'HDMI-A-1' crtc=-1 state=0 desired_enabled=0
00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1116] 'HDMI-A-2' crtc=-1 state=0 desired_enabled=0
00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1116] 'DVI-D-1' crtc=-1 state=0 desired_enabled=0
00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1167] State after reallocation:
00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1174] 'DP-1' crtc=-1 state=1 desired_enabled=0
00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1174] 'DP-2' crtc=1 state=3 desired_enabled=1
00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1174] 'HDMI-A-1' crtc=-1 state=0 desired_enabled=0
00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1174] 'HDMI-A-2' crtc=-1 state=0 desired_enabled=0
00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1174] 'DVI-D-1' crtc=-1 state=0 desired_enabled=0
where the crtc for DP-1 is now NULL. Trying to enable the output results
in:
10:43:36.906 [DEBUG] [sway/config/output.c:351] Turning on output DP-1
10:43:36.906 [DEBUG] [sway/config/output.c:360] Set preferred mode
10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.906 [DEBUG] [sway/config/output.c:366] Preferred mode rejected, falling back to another mode
10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.907 [DEBUG] [sway/config/output.c:400] Auto-detected output scale: 1.000000
10:43:36.907 [DEBUG] [sway/config/output.c:430] Committing output DP-1
10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer
10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats
10:43:36.907 [ERROR] [sway/config/output.c:435] Failed to commit output DP-1
where the primary format can't be queried since there is no crtc
allocated for the connector. Allocating the connector inside
drm_connector_get_primary_formats() fixes this issue. This is possible
since the only user of get_primary_formats() is the swapchain allocation
function, which is only called on output enable. Do the same thing for
the cursor formats in case the user queries them before the output is
enabled.
This reverts commit 85757665e6.
We now check if the output is enabled within wlr_output_send_frame, no
need to handle this explicitly in the DRM backend. This also fixes a
race which was introduced with this commit: if we schedule the flip,
disable and commit the output before the flip happens,
output.frame_pending will not be reset to false. We than always fail to
enable the output subsequently:
00:07:13.276 [INFO] [sway/commands.c:257] Handling command 'output DP-2 enable'
00:07:13.276 [DEBUG] [sway/commands.c:428] Subcommand: enable
00:07:13.276 [DEBUG] [sway/config/output.c:204] Merging on top of existing output config
00:07:13.276 [DEBUG] [sway/config/output.c:227] Config stored for output DP-2 (enabled: 1) (-1x-1@-1.000000Hz position 0,0 scale -1.000000 subpixel unknown transform -1) (bg /home/phoenix/Pictures/Wallpapers/mine/oper.jpg fill) (dpms 1) (max render time: -1)
00:07:13.276 [DEBUG] [sway/config/output.c:351] Turning on output DP-2
00:07:13.276 [DEBUG] [sway/config/output.c:360] Set preferred mode
00:07:13.276 [DEBUG] [wlr] [backend/drm/drm.c:465] connector DP-2: Can't enable an output without a buffer
00:07:13.276 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset
00:07:13.277 [DEBUG] [sway/config/output.c:329] Output DPI: 162.560000x161.364706
00:07:13.277 [DEBUG] [sway/config/output.c:400] Auto-detected output scale: 1.000000
00:07:13.277 [DEBUG] [sway/config/output.c:430] Committing output DP-2
00:07:13.277 [DEBUG] [wlr] [types/wlr_output.c:729] Tried to commit a buffer while a frame is pending
since the basic_output_test will always fail.
Reset frame_pending to false even if the output has been disabled in the
meantime.
Fixes https://github.com/swaywm/wlroots/issues/3109
When testing a modeset, make sure the caller has also provided a
buffer. This allows df0e75ba05 ("output: try skipping buffer
allocation if the backend allows it") to work as expected with the
DRM backend.
Closes: https://github.com/swaywm/wlroots/issues/3086
Unless we're dealing with a multi-GPU setup and the backend being
initialized is secondary, we don't need a renderer nor an allocator.
Stop initializing these.
This is the cause of the spurious "drmHandleEvent failed" messages
at exit. restore_drm_outputs calls handle_drm_event in a loop without
checking whether the FD is readable, so drmHandleEvent ends up with a
short read (0 bytes) and returns an error.
The loop's goal is to wait for all queued page-flip events to complete,
to allow drmModeSetCrtc calls to succeed without EBUSY. The
drmModeSetCrtc calls are supposed to restore whatever KMS state we were
started with. But it's not clear from my PoV that restoring the KMS
state on exit is desirable.
KMS clients are supposed to save and restore the (full) KMS state on VT
switch, but not on exit. Leaving our KMS state on exit avoids unnecessary
modesets and allows flicker-free transitions between clients. See [1]
for more details, and note that with Pekka we've concluded that a new
flag to reset some KMS props to their default value on compositor
start-up is the best way forward. As a side note, Weston doesn't restore
the CRTC by does disable the cursor plane on exit (see
drm_output_deinit_planes, I still think disabling the cursor plane
shouldn't be necessary on exit).
Additionally, restore_drm_outputs only a subset of the KMS state.
Gamma and other atomic properties aren't accounted for. If the previous
KMS client had some outputs disabled, restore_drm_outputs would restore
a garbage mode.
[1]: https://blog.ffwll.ch/2016/01/vt-switching-with-atomic-modeset.html
Right now callers of drm_crtc_commit need to check whether the
interface is legacy or atomic before passing the TEST_ONLY flag.
Additionally, the fallbacks for legacy are in-place in the common
code.
Add a test_only arg to the crtc_commit hook. This way, there's no
risk to pass atomic-only flags to the legacy function (add an assert
to ensure this) and all of the legacy-specific logic can be put back
into legacy.c (done in next commit).
The previous fix tried to side-step cursor->pending_fb completely.
However that messes up our buffer locking mechanism.
Instead, stop clearing the pending cursor FB on a failed commit. The
pending cursor FB will remain for the next commit.
Fixes: 6c3d080e25 ("backend/drm: populate cursor plane's current_fb")
This reverts commit 6c3d080e25.
Populating wlr_drm_plane.current_fb messes up the buffer's locking.
The previous buffer is released while it's still being displayed
on-screen.
Custom backends and renderers need to implement
wlr_backend_impl.get_buffer_caps and
wlr_renderer_impl.get_render_buffer_caps. They can't if enum
wlr_buffer_cap isn't made public.
Right now, when a new output state field is added, all backends by
default won't reject it. This means we need to add new checks to
each and every backend when we introduce a new state field.
Instead, introduce a bitmask of supported output state fields in
each backend, and error out if the user has submitted an unknown
field.
Some fields don't need any backend involvment to work. These are
listed in WLR_OUTPUT_STATE_BACKEND_OPTIONAL as a convenience.
The set_cursor() hook is a little bit special: it's not really
synchronized to commit() or test(). Once set_cursor() returns true,
the new cursor is part of the current state.
This fixes a state where wlr_drm_connector.cursor_enabled is true
but there is no FB available. This is triggered by set_cursor()
followed by a failed commit(), which resets pending_fb.
We should definitely fix the output interface to make the cursor part
of the pending state, but that's a more involved change.
Instead of trying to perform a real modeset in init_renderer,
perform an atomic test-only commit to find out whether disabling
modifiers is necessary because of bandwidth limitations.
This decouples init_renderer from the actual commit, making it
possible to modeset an output with a user-supplied buffer instead
of a black frame.
We loose the ability to make sure the buffers coming from the
swapchain will work fine when using the legacy interface. This
can break i915 when atomic is disabled and modifiers enabled.
But i915 always has atomic (so the user must explicitly disable it
to run into potential bandwidth limitations) and is the only known
problematic driver.
Instead of passing a wlr_texture to the backend, directly pass a
wlr_buffer. Use get_cursor_size and get_cursor_formats to create
a wlr_buffer that can be used as a cursor.
We don't want to pass a wlr_texture because we want to remove as
many rendering bits from the backend as possible.
Backend-initiated mode changes can use this function instead of
going through drm_connector_set_mode. drm_connector_set_mode becomes
a mere drm_connector_commit_state helper.
Replace it with a new drm_connector_state_is_modeset function that
decides whether a modeset is necessary directly from the
wlr_output_state which is going to be applied.
Populate the wlr_output_state when setting a mode. This will allow
drm_connector_set_mode to stop relying on ephemeral fields in
wlr_drm_crtc. Also drm_connector_set_mode will be able to apply
both a new buffer and a new mode atomically.
Stop assuming that the state to be applied is in output->pending in
crtc_commit. This will allow us to remove ephemeral fields in
wlr_drm_crtc, which are used scratch fields to stash temporary
per-commit data.
PRIME support for buffer sharing has become mandatory since the renderer
rewrite. Make sure we check for the appropriate capabilities in backend,
allocator and renderer.
See also #2819.
Downgrade errors to DEBUG level, because drm_fb_create is used in
test_buffer, so errors aren't always fatal. Add ERROR logs at call
sites where a failure is fatal, to make it clear something wrong
happened.
If the import to KMS succeeds, we have a better chance to be able to
scan it out.
Importing is also necessary for test-only commits, which we want to
add in the future.
Compute only the transform matrix in the output. The projection matrix
will be calculated inside the gles2 renderer when we start rendering.
The goal is to help the pixman rendering process.
In 93cd3a79b2 ("backend/drm: stop using GBM flags"), we stopped
using the GBM_BO_USE_LINEAR flag in favor of a modifier list set
to { DRM_FORMAT_MOD_LINEAR }. However, the last argument of
drm_plane_init_surface disables modifiers -- so the buffer will just
get allocated with an implicit modifier, without necessarily being
LINEAR.
To fix this, allow modifiers when allocating the cursor buffers.
wlr_drm_plane.formats should already have the necessary LINEAR
restrictions.
Fixes: 93cd3a79b2 ("backend/drm: stop using GBM flags")
This allows a compositor to get a KMS connector object ID from a
wlr_output. The compositor can then query more information about
the connector via libdrm.
This gives more freedom to compositors and allows them to read
KMS properties that wlroots doesn't know about. For instance,
they could read the EDID or the suggested_{X,Y} properties and
change their output configuration based on that.
The subconnector property indicates the connector sub-type. This is
useful because that usually indicates what kind of connector the user
has plugged in to their monitor, e.g. a DisplayPort-to-DVI cable will
indicate a DVI subconnector. Also some laptops have non-DP connectors
that are internally linked to a DP port on the GPU.
Set the output description accordingly.
See https://drmdb.emersion.fr/properties/3233857728/subconnector
Since 5b1b43c68c ("backend/drm: make wlr_drm_plane.{pending,queued,current}_fb
pointers"), current_fb can be NULL if there's no buffer. If current_fb
is not NULL, current_fb->wlr_buf is guaranteed to not be NULL.
Closes: https://github.com/swaywm/wlroots/issues/2634
Stop keeping track of buffers on the parent GPU when multi-GPU is used.
This removes support for export_dmabuf on secondary GPUs, but renderer
v6 will bring this back by managing the swapchains in wlr_output instead
of the backends.
wlr_drm_connector.crtc may be updated by the DRM backend while a
page-flip is pending. In this case, the page-flip handler won't be able
to find the right wlr_drm_connector from the CRTC ID.
Save the CRTC when performing a page-flip to ensure we always find the
right connector when we get the event.
We now properly mark the cursor plane's formats as linear-only, and we
now have a version of wlr_drm_format_intersect that handles the case of
linear-only formats and implicit modifiers.
We can remove the special drm_plane_init_surface flag we had for cursor
planes. This also allows us to use a non-linear layout for cursor planes
on drivers that support it.
Tested on amdgpu GFX9.
If the kernel driver doesn't support modifiers, it still expects cursor
FBs to have a LINEAR layout. See [1] for expectations for framebuffers
attached to the cursor plane.
[1]: https://patchwork.freedesktop.org/patch/408512/
Parse WLR_DRM_NO_MODIFIERS at startup. Don't parse IN_FORMATS when
WLR_DRM_NO_MODIFIERS is set, so that the legacy behaviour is better
reproduced.
When modifiers aren't supported, try the initial page-flip once only.
This was lost during the refactoring. We were previously calling
wlr_output_destroy, which destroyed the connector as well.
Fixes: 248c7787c7 ("backend/drm: refactor wlr_output destruction")
The DRM backend is a little special when it comes to wlr_outputs: the
wlr_drm_connectors are long-lived and are created even when no screen is
connected.
A wlr_drm_connector only advertises a wlr_output to the compositor when
a screen is connected. As such, most of wlr_output's state is invalid
when the connector is disconnected.
We want to stop using wlr_output state on disconnected connectors.
Introduce wlr_drm_connector.name which is always valid regardless of the
connector status to avoid reading wlr_output.name when disconnected.
Simplify and unify connector-specific logging with a new
wlr_drm_conn_log macro. This makes it easier to understand which
connector a failure is about, without having to explicitly integrate the
connector name in each log message.
The workaround is broken because drm_fb_acquire doesn't leave the EGL
context current anymore. We'll need to re-introduce it.
References: https://github.com/swaywm/wlroots/issues/2525
gbm_bo_create_with_modifiers doesn't take GBM flags, so our
wlr_gbm_allocator interface doesn't either. We were still internally
using GBM flags in the DRM backend, leading to awkward back-and-forth
conversions.
The only flag passed to drm_plane_init_surface was GBM_BO_USE_LINEAR, so
turn that into a bool to make sure other flags can't be passed in.
Move the "force linear" logic out of init_drm_surface, because the
supplied wlr_drm_format should already contain that information.
After discussing with Pekka and Daniel on #dri-devel, we concluded [1]
that user-space shouldn't need to force-probe connectors. Force-probing
can take some time, so using drmModeGetConnectorCurrent can result in
faster start-up.
Users can manually trigger a force-probe if necessary:
echo detect | sudo tee /sys/class/drm/card0-DP-1/status
Or just by running a tool like drm_info.
A similar change has been submitted to Weston [2].
[1]: https://lists.freedesktop.org/archives/dri-devel/2020-November/287728.html
[2]: https://gitlab.freedesktop.org/wayland/weston/-/issues/437
We would always return the GAMMA_LUT_SIZE property if available, and
only fall back to legacy gamma size otherwise. This leads to issues if
both are available in differs in size while we use the legacy backend.
Ensure that we only return the legacy size if we're using the legacy
backend.
Closes: https://github.com/swaywm/wlroots/issues/2429
When performing a modeset, the DRM backend will request a page-flip
event. However frame_pending wasn't set to true, so any subsequent
wlr_output_schedule_frame calls would imemdiately trigger a synthetic
frame event, asking the compositor to submit a new frame. Committing the
new frame fails with "a page-flip is already pending" error in the DRM
backend.
When an output is disabled one last pageflip will happen to disable it.
Currently this pageflip causes a frame event.
Since the output is disabled we don't want to send this frame event.
get_drm_prop_blob does not set path_len if it returns NULL. Check the
return value before path_len to avoid reading uninitialized memory.
(Granted, this doesn't change the logic at all, but it does make
Valgrind a bit happier.)
drm_connector_set_cursor wasn't checking the return value of the
drm_surface_make_current call. On failure, this results in a failed
assertion in wlr_renderer_begin (because no rendering context is
current).
The output backend API is now mostly state-less thanks to the atomic
hooks (commit and test). There is one exception though: attach_render.
This function makes the rendering context current. However sometimes the
compositor might decide not to render after attach_render (e.g. when
there's nothing new to render to the back buffer). Thus
wlr_output_rollback has been introduced to revert the pending state.
Because the output backend API is mostly state-less, the only thing
wlr_output_impl.rollback needs to do is revert the current rendering
context. Rename the function to rollback_render to make this clear. Add
a check in the common wlr_output code to only call rollback_render when
attach_buffer has been previously called.
On the long term, we'll be able to remove attach_render and
rollback_render together.
This patch fixes this failure:
01:57:16.642 [ERROR] [backend/drm/drm.c:360] Failed to page-flip output 'eDP-1': a page-flip is already pending
01:57:16.684 [ERROR] [backend/drm/drm.c:360] Failed to page-flip output 'eDP-1': a page-flip is already pending
01:57:16.684 [ERROR] [backend/drm/drm.c:732] Failed to initialize renderer on connector 'eDP-1': initial page-flip failed
01:57:16.684 [ERROR] [backend/drm/drm.c:805] Failed to initialize renderer for plane
01:57:16.684 [sway/config/output.c:423] Failed to commit output eDP-1
References: https://github.com/swaywm/sway/issues/5101
When the mode, status or buffer hasn't changed, drm_connector_commit was
a no-op. Because of this individual changes to the gamma LUT or adaptive
sync status were ignored (if committed without a buffer).
Instead, perform a commit to apply the changes.
A test commit doesn't apply the pending state.
The CRTC state will be populated again if the compositor decides to
perform a regular commit afterwards.
Previously, we only had the pending state (crtc->pending, crtc->mode and
crtc->active). This causes issues when a commit fails: the pending state
is left as-is, and the next commit may read stale data from it.
This will also cause issues when implementing test-only commits: we need
to rollback the pending CRTC state after a test-only commit.
Introduce separate pending and current CRTC states. Properly update the
current state after a commit.
retry_pageflip is now dead code, since drm_connector_start_renderer
isn't called anymore. It was previously called when enabling an output.
The name "retry_pageflip" was a little confusing because the function
retried a modeset and the timer wasn't set up while performing a simple
page-flip.
Let's just remove this altogether for now. We can discuss whether it's
worth it to bring it back. Should we only do it on failed page-flips?
Should we only do it on EBUSY?
After swapping buffers, it doesn't make sense to perform more rendering
operations. Unset the context to reflect this.
This commit makes it so the context is always only current between
wlr_egl_make_current and wlr_egl_swap_buffers.
This is an alternative to [1].
[1]: https://github.com/swaywm/wlroots/pull/2212
This function can be called after wlr_egl_make_current to cleanup the
EGL context. This avoids having lingering EGL contexts that make things
work by chance.
Closes: https://github.com/swaywm/wlroots/issues/2197
dealloc_crtc was destroying GBM surfaces, but the cursor_enabled flag
was left as-is. When re-enabling the output, atomic_crtc_pageflip would
try enabling the cursor plane, but would fail because no framebuffer is
available.
Closes: https://github.com/swaywm/wlroots/issues/2150
When an output is enabled and modeset at the same time,
drm_connector_commit would first try to modeset then try to commit. This
won't work because both will trigger a page-flip. KMS will reject that.
Change the logic to only enable an output if no modeset has been
requested. The logic in wlr_output already checks that the user isn't
doing a modeset and disabling the output at the same time.
We have a workaround for legacy drivers that support drmModeSetCursor
without exposing a cursor plane. It doesn't work anymore now that we've
moved to a more atomic interface.
Let's just remove this workaround and fallback to software cursors.
Closes: https://github.com/swaywm/wlroots/issues/2166
We don't need a per-CRTC atomic request anymore. Let's make the request
per-commit so that it's easier to debug.
This is also groundwork for supporting wlr_output_test properly.
GAMMA_LUT_SIZE isn't an atomic property. It can be used with the legacy
interface too. So we can unify both codepaths and remove
wlr_drm_interface.crtc_get_gamma_size.
It's no guaranteed to exist though, so we still need to keep the
fallback.
The logs don't currently display the importance of a line. It's easy to
read "skipping page-flip" as a debug message instead of an error
message.
Change the error message to make it more explicit.
References: https://github.com/swaywm/wlroots/pull/2147
Reconnecting an external display fails on initial
page-flip. This occurs when the pageflip_pending flag
has been set on the connector at the time the monitor
is removed. Once the connector's CRTC has been deallocated,
page_flip_handler cannot find the connector by its crtc_id,
so pageflip_pending will remain set. This causes
initialization to fail when the monitor is reconnected
with the error messages:
Skipping pageflip on output 'X'
Failed to initialize renderer on connector 'X': initial page-flip failed
To fix this problem, clear the pageflip_pending flag
when cleaning up the connector.
This is a type which manages gbm_surfaces and imported dmabufs in the
same place, and makes the lifetime management between the two shared. It
should lead to easier to understand code, and fewer special cases.
This also contains a fair bit of refactoring to start using this new
type.
Co-authored-by: Simon Ser <contact@emersion.fr>
Most of the pending output state is not forwarded to the backend prior
to an output commit. For instance, wlr_output_set_mode just stashes the
mode without calling any wlr_output_impl function.
wlr_output_impl.commit is responsible for applying the pending mode.
However, there are exceptions to this rule. The first one is
wlr_output_attach_render. It won't go away before renderer v6 is
complete, because it needs to set the current EGL surface.
The second one is wlr_output_attach_buffer.
wlr_output_impl.attach_buffer is removed in [1].
When wlr_output_rollback is called, all pending state is supposed to be
cleared. This works for all the state except the two exceptions
mentionned above. To fix this, introduce wlr_output_impl.rollback.
Right now, the backend resets the current EGL surface. This prevents GL
commands from affecting the output after wlr_output_rollback.
This patch is required for FBO-based outputs to work properly. The
compositor might be using FBOs for its own purposes [2], having leftover
FBO state can have bad consequences.
[1]: https://github.com/swaywm/wlroots/pull/2097
[2]: https://github.com/swaywm/wlroots/pull/2063#issuecomment-597614312
Check that buffer can be scanned out in wlr_output_test instead of
wlr_output_attach_buffer. This allows the backend to have access to the
whole pending state when performing the check.
This brings the wlr_output API more in line with the KMS API.
This removes the need for wlr_output_attach_buffer to return a value,
and for wlr_output_impl.attach_buffer.
Consumers call wlr_buffer_lock. Once all consumers are done with the
buffer, only the producer should have a reference to the buffer. In this
case, we can release the buffer (and let the producer re-use it).
This function allowed backends to provide a custom function for frame
scheduling. Before resuming the rendering loop, the DRM and Wayland
backends would wait for vsync.
There isn't a clear benefit of doing this. The only upside is that we
get more stable timings: the delay between two repaints doesn't change too
much and is close to a mutliple of the refresh rate.
However this introduces latency, especially when a client misses a
frame. For instance a fullscreen game missing vblank will need to wait
more than a whole frame before being able to display new content. This
worst case scenario happens as follows:
- Client is still rendering its frame and cannot submit it in time
- Deadline is reached
- Compositor decides to stop the rendering loop since nothing changed on
screen
- Client finally manages to render its frame, submits it
- Compositor calls wlr_output_schedule_frame
- DRM backend waits for next vblank
- The wlr_output frame event is fired, compositor draws new content on screen
- On the second next vblank, the new content reaches the screen
With this patch, the wlr_output frame event is fired immediately when
the client submits its late frame.
This change also makes it easier to support variable refresh rate, since
VRR is all about being able to present too-late frames earlier.
References: https://github.com/swaywm/wlroots/issues/1925
The previous PR was overzealous in adding a finish_drm_surface call
which was also done by the caller. Remove the call and also move the
comment to the correct code location.
In some cases modesets fail if the planes are initialized with
modifiers. Since in this case possibly all planes need to reinitialized,
which is not possible in the current wlroots design, add an environment
variable for affected users.
This fixes a segfault in drm_connector_set_mode (mode = NULL).
This happens because we set wlr_output.enabled to true if the connector
is attached to the CRTC. When the user disables an output in the
wlroots-based compositor, switches to another VT (enabling the output),
then switches back, wlroots sets wlr_output.enabled to true but
wlr_output.current_mode is NULL.
We should consider not reading properties from KMS after a TTY switch,
disabling all connectors. However this may result in flickering (outputs
being disabled then re-enabled).
Closes: https://github.com/swaywm/wlroots/issues/1874
wlr_output.description is a string containing a human-readable string
identifying the output. Compositors can customise it via
wlr_output_set_description, for instance to make the name more
user-friendly.
References: https://github.com/swaywm/wlroots/issues/1623
This is set to the value of wlr_output.commit_seq when the frame has
been submitted. This allows tracking presentation with more then 1 full
frame of latency.
References: https://github.com/swaywm/wlroots/issues/1917
Instead of checking that the path property is not 0 to determine if the
connector is an MST connector, check if the path contains the mst:
string.
Fixes#1813
Instead of waiting for the next pageflip, destroy the output immediately
since we can now handle flips for outputs which no longer exist.
Also demote the missing crtc on flip to debug.
Fixes#1739
This commit makes more output properties (mode, enabled, scale and transform)
atomic. This means that they are double-buffered and only applied on commit.
Compositors now need to call wlr_output_commit after setting any of those
properties.
Internally, backends still apply properties sequentially. The behaviour should
be exactly the same as before. Future commits will update some backends to take
advantage of the atomic interface. Some backends are non-atomic by design, e.g.
the X11 backend or the legacy DRM backend.
Updates: https://github.com/swaywm/wlroots/issues/1640
The documentation for wayland-server.h says:
> Use of this header file is discouraged. Prefer including
> wayland-server-core.h instead, which does not include the server protocol
> header and as such only defines the library PI, excluding the deprecated API
> below.
Replacing wayland-server.h with wayland-server-core.h allows us to drop the
WL_HIDE_DEPRECATED declaration.
atomic and legacy now both pass the backend as the user data for the
pageflip event. We than retrieve the correct connector by matching on
the crtc_id passed to the page_flip_handler2.
Wlroots also requires the DRM_CRTC_IN_VBLANK_EVENT capability now.
Fixes#1297
The backend doesn't need to handle transform changes, since everything is done
in software. In fact, all of the implementations were all identical and just
set the transform.
We could add support for hardware transforms, but:
- This would require a different field (something like hardware_transform)
- Not all combinations are possible because there often are hardware
limitations
- The Wayland protocol isn't ready for this (in particular xdg-output, see [1])
This belongs to a different patch series anyway.
[1]: https://patchwork.freedesktop.org/series/52324/
Simon Ser
Kirill Primak
Simon Zeni
Rouven Czerwinski
Kenny Levinsen
Stephan Hilb
Ronan Pigott
Stephane Chauveau
Ilia Bozhinov
Marten Ringwelski
Devin J. Pohly
Antonin Décimo
JonnyMako
Will Daly
Scott Anderson
Filip Sandborg
Jason