GUD devices uses RGB565 by default for performance reasons. Allow
specifying render_bit_depth 6 to pick this format. The definition works
out if you consider the maximum number of bits per channel instead of
the average.
Arranging lock surfaces rely on the sway_output width and height being
updated, but these are only updated after the commit has been completed
and all commit listeners have executed. This means that the lock
surfaces will not be appropriately scaled to match a change in output
dimensions, and may reveal what is under the lock background.
Replace the implicit arrange through the output commit listener with an
explicit arrange after the output configuration is finalized.
This might have regressed by other transition away from output commit
listeners for other arrange tasks, but even then it would have
erroneously relied on signalling order.
Some display output hardware [1] doesn't support any of the current
formats, but works with ARGB8888. Fall back to it if available.
[1] 196145c606/drivers/gpu/drm/xlnx/zynqmp_disp.c (L313)
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Instead of using a single finalized output config per output, accept a
regular list of output configs like the one ultimately stored for
configuration purposes. This allows the output management code to test
an augmented configuration while still using the same output config
logic, without having to mutate the stored configuration.
This in turn allows us to make a few APIs private. A bug note about an
existing issue with derade to off is added as well.
We always need to start out with the default configuration, regardless
of whether the config is reloading or not to ensure that config
decisions are stable given a specific configuration.
Simplify find_output_config and inline the search through the output
configs instead of using list_seq_find with a comparator function. The
new implementation will merge any amount of matched configs in order,
which will be relied upon in a future commit.
Previously, we incorrectly only set active keyboard for non-virtual
devices. 4c3c060211 incorrectly put
unrelated code in `sway_keyboard_set_layout`.
Fixes: 4c3c060211
If the output is not active, it might not have a valid geometry to
arrange for. Outputs do not gain a geometry until modeset, so if an
output is connected with a configuration present to disable it, it will
not have a geometry. If the output has a past workspace restored, this
will be attemtped arranged to fit a 0x0 rectangle, which asserts when
trying to sort out borders.
Consider the workspace activated only if the output itself is active to
get the scene nodes disabled.
The else condition was missed here and we would never skip the % char
if it didn't end up matching with any property. Since we fail to skip
we would re-evaluate the % in an infinite loop never achieving any
forward-progress.
Fixes: https://github.com/swaywm/sway/issues/8333
Output layout changes originate from the centralized modeset
infrastructure and request_state which already takes care of arranging
and updating outputs as needed.
output_enable/output_disable are only called from modeset, and from
output destroy which requests modeset. As such, they can rely on the
modeset handling arrange.
The reasoning for using a commit handler is to ensure that all paths for
output changes are correctly handled. With the centralized modeset
infrastructure in place, we can move the logic there. This allows us to
be smarter and avoid extraneous arranges, output manager updates and
transaction commits.
The side-effect is a minor duplication for the special-case
request_state, but the shared path will be relied upon further in future
commits to justify this duplication.
This can cause issues such as the window not being shown at the exact
same coordinates when the old and new wlr_box aren't the same
dimensions and the container is being moved back-and-forth between them.
For example, in the case where a floating window gets moved
from one output to another but the outputs aren't the same resolution.
For e.g. have two displays that aren't the same resolution then:
1. Open a floating window and set it to pos 0,0 on output 2
2. Send it to scratchpad then `scratchpad show` on output 1
3. `scratchpad show` on output 2 again
Observe that the window isn't at 0,0 on output 2 anymore.
When moving a container to a new workspace, the workspace's dimension
are left unset. Usually this doesn't matter, but when moving a floating
container to a new workspace on a different output, this leads to the
position of the container being calculated with 0, so the container ends
up halfway offscreen on the leftmost topmost monitor.
Signed-off-by: Anna (navi) Figueiredo Gomes <navi@vlhl.dev>
When doing an output configuration search, the intent is to only look
for modes if the output's configuration does not contain a specific
mode. This was done by testing if config_has_auto_mode returned false.
config_has_auto_mode had its return values backwards, leading to other
modes being tested if the output configuration had specified modes or
modelines, leading to unwanted modes being selected.
Invert the function to config_has_manual_mode to give it a clearer name,
and fix the return values in the process.
After 4e38f93f36 ("config/output: Skip VRR tests when not supported"),
the configuration search no longer touches VRR state for outputs that
are known to not support it. This also means that it will not remove VRR
if already set, which could cause output configuration to fail.
Ensure that VRR state is never set for outputs that do not support it by
adding the same test for support to queue_output_config.
Fixes: 4e38f93f36 ("config/output: Skip VRR tests when not supported")
Fixes: https://github.com/swaywm/sway/issues/8296
Note that in the `sway_keyboard_configure` function of sway/input/keyboard.c,
we have skipped the `sway_keyboard_set_layout` function for virtual
keyboards, which then have null keymaps.
Hence, a null-safety check is needed at runtime.
When attempting to use Git to populate commit/branch information in a
version string, it is possible through repository discovery that it
uses Git information not relevant to project. For example, if
repository content is extract into an interim build location when using
an embedded build framework (e.g. Buildroot), the project will not have
its Git repository to refer to. When it cannot find its repository, it
will look into its parent folders and may find the Git repository of
another project and use its branch/commit information.
This commit provides an explicit path to the project's Git repository
when consider commit/branch information. This will prevent any
repository discovery from occurring.
Signed-off-by: James Knight <james.d.knight@live.com>
daaec72ac0 ("desktop/xwayland: restack surface upon activation")
has updated Sway for wlroots commit bfc69decdd04 ("xwm: do not
restack surfaces on activation"). However, it unconditionally
restacks the window above all other windows even if marking the
window as inactive.
Closes: https://github.com/swaywm/sway/issues/7974
Commit 188811f808 ("scene_graph: Port layer_shell") accidentally
removed code in `arrange_layers` to handle focus on layer shell
surfaces with keyboard interactivity.
Due to this, layer shell surfaces requesting exclusive keyboard
interactivity may not get automatically focused, and layer shell
surfaces giving up exclusive keyboard interactivity can remain focused.
Add the previous code back to fix the problem.
Note the non-rename change included in b4d7e84d38 ("desktop: Rename
layers to shell_layers") is not included as it also seems accidental.
Fixes: #7936
1e0031781f refactored repaint to accumulate all changes in a single
wlr_output_state and commit them at the end of the repaint loop,
replacing a call to wlr_scene_output_commit. wlr_scene_output_commit
contains an early bail-out when no frame has been requested and no
damage has accumulated, which was not replicated as part of this
refactor, causing the repaint loop to never pause.
Replicate the logic to stop the repaint loop as needed.
Fixes: 1e0031781f ("desktop/output: unify page-flip codepath")
Emil Engberg
Kenny Levinsen
Steffen Dirkwinkel
Adam Chovanec
llyyr
Alexander Orzechowski
Norbert Bolanowski
Jon Wallace
Anna (navi) Figueiredo Gomes
Kirill Primak
Felix Pehla
Simon Ser
JingMatrix
Ricardo Steijn
James Knight
Joan Bruguera Micó
Bill Li