Currently commented lines ending in the backslash character will be
concatenated with the following line.
```
# with this comment \
exec swaynag -m 'will not run'
```
This change modifies `getline_with_cont` to stop reading when the
initial character is a '#'.
Calling wlr_output_manager_v1_set_configuration with an enabled output
and a NULL mode is incorrect if the output doesn't support modes.
When DPMS'ing an output, wlr_output_enable(output, false) is called.
This de-allocates the CRTC and sets wlr_output.current_mode to NULL.
Because we mark DPMS'ed outputs as enabled, we also need to provide a
correct output mode. Add a field to sway_output to hold the current
mode.
Closes: https://github.com/swaywm/wlroots/issues/1867
When applying config, value mode->refresh is mHz; convert it to Hz before
assigning it to the temporary output config. oc->refresh_rate will
be converted back to mHz in set_mode function.
Fix debug log printing GHz instead of Hz.
When changing a surface from managed to unmanaged in handle_map(), the
call to handle_destroy(.., view) causes the sway_xwayland_view pointed
to by the untyped wlr_xwayland_surface.data field to become invalid
garbage, yet the untyped wlr_xwayland_surface.data continues to point
at it. In particular: view_get_*(view_from_wlr_surface(..)), even
with appropriate NULL checking, will crash sway when this codepath is
exercised (reliable test case: drop-down menus in Google Earth).
Some examples use comma to separate x and y for setting the output
position which is wrong.
Let's change it to spaces, as correctly demonstrated in the
`output <name> position|pos <X> <Y>` section.
Popups are positioned relative to local surface coordinates of the
parent surface. There's no need to consider values set with
xdg_surface.set_window_geometry for parent surfaces.
Sometimes when using direct scan-out, some flickering between the
fullscreen app and the regular desktop could be seen.
This happened because we called wlr_output_attach_render and then
wlr_output_attach_buffer for direct scan-out. wlr_output_attach_render
makes the OpenGL context current but also attaches the OpenGL buffer to
the primary plane apparently (all of this happens inside
eglMakeCurrent).
This patch moves the scan-out logic outside of output_render, before
wlr_output_attach_render. This lines it up with rootston's
implementation. This also makes more sense since no rendering is
involved when using direct scan-out.
Sorry about that, I should've tested this with more clients. The new
code has been tested with mpv and a GLFW demo.
Sway has basic support for drawing tablets, but does not expose
properties such as pressure sensitivity. This implements the wlr tablet
v2 protocol, providing tablet events to Wayland clients.
If the view was mapped as fullscreen or the view was assigned either a
workspace or output, the pid was not being populated since it was
occurring as part of the pid mapping check in select_workspace. This
extracts the pid population and makes it so it is always executed
Subsurfaces (in most cases popups) aren't decorated by sway
and will never have any borders, but may be drawn beyond container
boundaries producing false positive when searching for edge.
So we want to skip edge search when handling mouse event on subsurface.
This adds complete support for the barconfig_update ipc event. This also
changes the bar command and subcommand handlers to correctly emit the
event. This makes it so all bar subcommands other than id and
swaybar_command are dynamically changeable at runtime. sway-bar.5 has
been updated accordingly
This matches i3's behavior of only focusing a container when pressed.
This allows for `bindsym button1 nop`, `bindsym BTN_LEFT nop`, or
`bindcode 272 nop` to be used to disable focusing when clicking on the
title (or with additional flags to bind{code,sym} other portions of
the container).
Without this additional condition, the user would need both
`bindsym button1 nop` and `bindsym --release button1 nop` to override
both the pressed and released behavior.
Focused layers are not cleared when destroyed, they are cleared on unmap.
Giving focus to an unmapped layer surface is (1) incorrect and (2) triggers a
use-after-free.
Closes: https://github.com/swaywm/sway/issues/4517
This make seat_update_capabilities set cursor image only if
there was no pointer cap before update. This avoid resetting
cursor to left_ptr if an input device is removed.
In cmd_mode, the mode is currently being reset to the default mode after
a mode subcommand handler is executed. This stores and restores the mode
instead
When moving to a scratchpad hidden container (using `move
[window|container] [to] mark <mark>`), this moves the container to the
scratchpad (equivalent to `move [window|container] [to] scratchpad`).
Previously, this would crash since the destination did not have a
workspace.
Match i3's behavior and only return one status response per command,
even if it applies to several nodes.
Also returns an error if the criteria returns an empty match.
Closes#4483
It looks like floating_scroll was still in the sway(5) man page as a
remnant of the 0.x era. This just removes it from the man page since it
is no longer a valid command. Mouse bindings with Button4-7 can be used
instead
This just adds a force option to cmd_xwayland that allows for xwayland
to be immediately launched instead of lazily launched. This is useful
for slower machines so it can be part of the startup time instead of
when the user is actively trying to use it
This keeps track of whether surfaces received a key press event and
will only send a key release event if the pressed event was sent. This
also requires changing the keycodes that are sent via wl_keyboard_enter
to only include those that were previously sent. This makes it so
surfaces do not receive key release events for keys that they never
received a key press for and makes it so switching focus doesn't leak
keycodes that were consumed by bindings.
This adds an axis handler to seatop_down so that it is possible to
manually scroll while having a mouse button down. This is mainly useful
for selecting text. Some applications may not automatically scroll when
the cursor is near the edge of the application or the user may just
prefer manually scrolling for more control over the scrolling speed.
This just specifies that both cmd_font and bar_cmd_font should be
specified using the pango font description and adds a link to the pango
documentation regarding the font description
This copies the width and height fractions from the container to the
container replacing it. Without setting these values, the container
is treated as a new container and throws off the existing sizing. Since
one container is replacing the other, it makes sense for the sizing to
remain the same.
Since each seat has its own focus, do not destroy a workspace until it
is no longer focused by any seat. This prevents seats from being forced
to evacuate the workspace just because another seat switched focus away
from it
In handle_seat_node_destroy, it was possible to focus the node attached
to the seat node that is being destroyed when an empty workspace was
being destroyed in a multiple seat environment. This resulted in
infinite recursion when attempting to destroy the workspace. This just
moves the seat node destruction higher so it cannot be the focus
inactive for the seat. This is the same ordering that is applied to
destruction of seat nodes for containers
Since output names can change in various configurations, including
DisplayPort MST, prefer output identifiers for the output priority.
Users can still use `workspace <ws> output <names-or-ids>`, but any
output that is programmatically added to the list will be added under
the output identifier. If the output name exists in the list (from the
user workspace output configs), then that will be retained instead of
switching to the output identifier for that output.
When applying an output config, an output may transform or be altered
in some way that effects the cursor. In order for the cursor images to
be updated properly, all cursors need to be rebased after applying
output configs.
This just adds a small quality of life improvement to the cursor hiding
functionality. The cursor will no longer be hidden unless all buttons
are released.
This enhances the opacity command to support relative assignment as well
as the currently implemented absolute assignment. The syntax is copied
from the same format that gaps uses for relative and absolute setting.
An example usage in a sway config looks like:
// relative change (this feature)
bindsym button4 opacity plus .1
bindsym button5 opacity minus .1
// absolute change (this feature)
bindsym button4 opacity set 1
bindsym button5 opacity set .3
// old way, still supported
bindsym button4 opacity 1
bindsym button5 opacity .3
This adds support for specifying a binding for a specific group. Any
binding without a group listed will be available in all groups. The
priority for matching bindings is as follows: input device, group, and
locked state.
For full compatibility with i3, this also adds Mode_switch as an alias
for Group2. Since i3 only supports this for backwards compatibility
with older versions of i3, it is implemented here, but not documented.
In sway_keyboard_config, do not change the keymap when the new keymap
is unchanged, unless this is during a config reload. The reasoning for
this is to prevent the effective layout from being reset to index 0 for
input config changes unrelated to the keymap.
This just fixes the check in set_send_events for whether the mode has
changed. LIBINPUT_CONFIG_SEND_EVENTS_ENABLED is 0 so the bitmask check
cannot be fixed, but Sway doesn't allow multiple modes to be set anyway
(not really sure why you would need to) so a basic equality check works
Sibling amounts were being calculated after the original fraction had
been altered. This led to broken resize amounts. Fix that by calculating
things upfront before adjusting values which also makes the code
cleaner.
For sanity checks also calculate the sibling amount with the
ceiling so we never go below the sanity check even by one pixel.
Fixes#4386
The documentation for wayland-server.h says:
> Use of this header file is discouraged. Prefer including
> wayland-server-core.h instead, which does not include the server protocol
> header and as such only defines the library PI, excluding the deprecated API
> below.
Replacing wayland-server.h with wayland-server-core.h allows us to drop the
WL_HIDE_DEPRECATED declaration.
This commit si similar to wlroots' ca45f4490ccc ("Remove all wayland-server.h
includes").
When arranging the workspace, prev_x and prev_y should be ignoring the
current gaps otherwise the workspace diff_x and diff_y location deltas
will be off. When the deltas are off, each arrangement of the workspace
would incorrectly move floaters an extra -workspace->current_gaps.left
along the x-axis and an extra -workspace->current_gaps.top along the
y-axis.
This adds a libinput_config change type to the input event for when
the libinput config for a device changes
In order for this to be possible to track, the libinput config code
had to be refactored. It is now extracted into a separate file to
isolate it from the rest of the input management code.
This adds an ipc event related to input devices. Currently the
following changes are supported:
- added: when an input device becomes available
- removed: when an input device is no longer available
- xkb_keymap_changed: (keyboards only) the keymap changed
- xkb_layout_changed: (keyboards only) the effective layout changed
Similar to seat command, this provides an alias for the current output.
Instead of the output name or identifier, `-` can be used to operate on
the focused output by name and `--` can be used to operate on the
focused output by its identifier. This will prevent operating on the
no-op output when using either alias.
Adds a new commend "xkb_file", which constructs the internal
xkb_keymap from a xkb file rather than an RMLVO configuration.
This allows greater flexibility when specifying xkb configurations.
An xkb file can be dumped with the xkbcomp program.
Instead of tracking gaps per child apply gaps in two logical places:
1. In tiled containers use the layout code to add the gaps between
windows. This is much simpler and guarantees that the sizing of children
is correct.
2. In the workspace itself apply all the gaps around the edge. Here
we're in the correct position to size inner and outer gaps correctly and
decide on smart gaps in a single location.
Fixes#4296
Instead of using container->width/height as both the input and output
of the layout calculation have container->width_fraction/height_fraction
as the share of the parent this container occupies and calculate the
layout based on that. That way the container arrangement can always be
recalculated even if width/height have been altered by things like
fullscreen.
To do this several parts are reworked:
- The vertical and horizontal arrangement code is ajusted to work with
fractions instead of directly with width/height
- The resize code is then changed to manipulate the fractions when
working on tiled containers.
- Finally the places that manipulated width/height are adjusted to
match. The adjusted parts are container split, swap, and the input
seat code.
It's possible that some parts of the code are now adjusting width and
height only for those to be immediately recalculated. That's harmless
and since non-tiled containers are still sized with width/height
directly it may avoid breaking other corner cases.
Fixes#3547Fixes#4297
If there is more than one new window layout correctly by calculating the
default size of the new windows using the information of how many of
them there are in total.
This helps with issue #3547 but doesn't fix it in all situations. Things
now work correctly if the first layout of new windows happens after
leaving fullscreen. But if for some reason an arrange_container() gets
called while we are fullscreen the windows will still be incorrectly
sized after saved_width/saved_height get used to restore the first
window's size before going fullscreen.
Previously, `layout toggle` and `layout toggle split` would set L_VERT
when layout was L_HORIZ, otherwise it would set L_HORIZ. This meant
that when the layout was L_TABBED or L_STACKED, it would always be
L_HORIZ. This extends #4315 (which corrects the handling when multiple
layouts are given) to try prev_split_layout,
config->default_orientation, and then falling back to L_VERT when the
output is taller than wide and L_HORIZ when wider than tall.
This fixes the logic of split for layout toggle when the default
layout is L_TABBED or L_STACKED. When the default layout is L_TABBED
or L_STACKED, the container/workspace may not have a prev_split_layout.
This was causing L_NONE to be returned by get_layout_toggle, which was
being handled as a syntax error. This adds logic to try
config->default_orientation when prev_split_layout is L_NONE. If that
is also L_NONE, then L_VERT is used when the output is taller than
wide, otherwise, L_HORIZ is used.
In apply_output_config, this sets output->{width,height} using the
values in the output box. Previously, they were being set using
wlr_output_transformed_resolution, which takes the width and height
from the wlr_output and just checks whether they should be swapped
based on the transform. This did not take into account the output's
scale. wlr_output_effective_resolution could be used instead, which
handles both transform and scale. However, the values in the output box
have already been processed by wlr_output_effective_resolution so they
can just be used directly
This adds checks to the input_manager_libinput_reset_* functions to
only attempt resetting supported options on reload. This should have no
functional difference to the user, but will remove several `Failed to
apply libinput config: Unsupported configuration option` lines from the
log that can be noisy and potential red herrings.
This adds a --reload flag to cmd_bindswitch that allows for the binding
to be executed on reload. One possible use case for this is to allow
users to disable outputs when the lid closes and enable them when the
lid opens without having to open and re-close the lid after a reload.
The function used for comparing two output names in the workspace
output priority lists was inverted. This was causing priority to not be
stored correctly resulting in workspaces not always being restored or
moved to the desired outputs
This allows for modes to be created, bindings to be added to modes, and
bindings to be removed from modes at runtime. Additionally, this also
allows for `mode <mode>` to be deferred in the config to set an initial
mode.
This separates the logic for seat subcommand handlers that only perform
actions on the seat and handlers that alter the seat config. The former
group can immediately free the seat config after running the command as
it is only used by the subcommand to find the name of the seat to
operate on. The latter group alters the seat config so it will need to
go through the storage and application stage (assuming success).
Without this change, the handlers listed in the config_handlers or
command_handlers arrays (depending on reading or active) in commands.c
would be valid subcommands. To make matters worse, they would also take
precedence over the defined subcommand handlers.
This corrects find_handler to only work on the handler array given
instead of implicitly trying others.
Since xwayland can only be enabled/disabled at launch, the xwayland
status should be retained on reload. Having `xwayland enabled|disabled`
in the config, should not cause `config->xwayland` to be invalid on
reload. This also returns `CMD_FAILURE` with a message that xwayland
can only be enabled/disabled on launch when trying to set the invalid
status on reload. This allows swaynag to notify the user that the
change will not take effect until sway is restarted.
Currently container_replace removes the container from the scratchpad
and re-adds it afterwards. For the split commands this results in the
container being send to the scratchpad, which results in a NULL segfault
if the same container should be shown.
Pass an optional workspace to root_scratchpad_add_container, if the
workspace is passed the window will continue to show on the workspace.
If NULL is passed it is sent to the scratchpad.
This was an issue if no other window except the scratchpad container was
on the workspace.
Fixes#4240
This adds the logic to defer binding execution while sway is still
initializing. Without this, the binding command would be executed, but
the command handler would return CMD_DEFER, which was being treated as
a failure to run. To avoid partial executions, this will defer all
bindings while config->active is false.
This patch fixes faulty command parsing introduced by
f0f5de9a9e. When that commit allowed
criteria reset on ';' delimeters in commands lists, it failed to account
for its inner ','-parsing loop eating threw the entire rest of the
string.
This patch refactors argsep to use a list of multiple separators, and
(optionally) return the separator that it matched against in this
iteration via a pointer. This allows it to hint at the command parser
which separator was used at the end of the last command, allowing it to
trigger a potential secondary read of the criteria.
Fixes#4239
This allows for an optional validation stage when storing an input
config. Currently, only the xkb keymap is validated. If storing the
delta input config will result in any invalid xkb keymaps, the input
config will not be stored and error will be populated with the first
line of the xkbcommon log.
Before the delta input config is stored, this attempts to compile a
keymap with it. If the keymap fails to compile, then the first line of
the xkbcommon log entry will be included with a `CMD_FAILURE`, the
entire xkbcommon log entry will be included in the sway error log, and
the delta will not be stored.
This only handles basic issues such as a layouts not existing. This
will NOT catch more complex issues such as when a variant does
exist, but not for the given layout (ex: `azerty` is a valid variant,
but the `us` layout does not have a `azerty` variant).
Commit 190546fd31 failed to consider the
edge case where xwayland is disabled via the sway config. This leads to
a SEGFAULT when setting the xwayland cursor since the xwayland server is
not running.
This matches i3's behavior of only retaining criteria across comma
separated commands. When separating commands with a semicolon, the
criteria is reset and allows for new criteria to be set, if desired.
New 'seat <name> xcursor_theme <theme> [<size>]' command that
configures the default xcursor theme.
The default seat's xcursor theme is also propagated to XWayland, and
exported through the XCURSOR_THEME and XCURSOR_SIZE environment
variables. This is done every time the default seat's configuration is
changed.
This adds the missing argument count check after the --i3 flag
processing in cmd_hide_edge_borders. Without the check,
`hide_edge_borders --i3` would result in a SIGSEGV instead of a syntax
error. There are some minor adjustments to make it so nothing gets
altered if this check fails
handle_destroy would mark the output es being destroyed and commit the
transaction. Committing the transaction results in the output being
freed, the output manager can not retrieve the server reference
afterwards, resulting in the following use-after-free:
==22746==ERROR: AddressSanitizer: heap-use-after-free on address 0x614000017088 at pc 0x560c1ac17136 bp 0x7ffeab146f20 sp 0x7ffeab146f10
READ of size 8 at 0x614000017088 thread T0
#0 0x560c1ac17135 in handle_destroy ../sway/desktop/output.c:566
#1 0x7f38af69330e in wlr_signal_emit_safe ../subprojects/wlroots/util/signal.c:29
#2 0x7f38af5d3dfc in drm_connector_cleanup ../subprojects/wlroots/backend/drm/drm.c:1448
#3 0x7f38af5d2058 in scan_drm_connectors ../subprojects/wlroots/backend/drm/drm.c:1240
#4 0x7f38af5c6a59 in drm_invalidated ../subprojects/wlroots/backend/drm/backend.c:135
#5 0x7f38af69330e in wlr_signal_emit_safe ../subprojects/wlroots/util/signal.c:29
#6 0x7f38af5e827a in udev_event ../subprojects/wlroots/backend/session/session.c:52
#7 0x7f38aef5d7f1 in wl_event_loop_dispatch (/usr/lib/libwayland-server.so.0+0xa7f1)
#8 0x7f38aef5c39b in wl_display_run (/usr/lib/libwayland-server.so.0+0x939b)
#9 0x560c1ac0afbe in server_run ../sway/server.c:225
#10 0x560c1ac09382 in main ../sway/main.c:397
#11 0x7f38aed35ce2 in __libc_start_main (/usr/lib/libc.so.6+0x23ce2)
#12 0x560c1abea10d in _start (/usr/local/bin/sway+0x3910d)
0x614000017088 is located 72 bytes inside of 432-byte region [0x614000017040,0x6140000171f0)
freed by thread T0 here:
#0 0x7f38af82df89 in __interceptor_free /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:66
#1 0x560c1acbd1ed in output_destroy ../sway/tree/output.c:243
#2 0x560c1ac23ce5 in transaction_destroy ../sway/desktop/transaction.c:66
#3 0x560c1ac26b71 in transaction_progress_queue ../sway/desktop/transaction.c:348
#4 0x560c1ac284ca in transaction_commit_dirty ../sway/desktop/transaction.c:539
#5 0x560c1ac17110 in handle_destroy ../sway/desktop/output.c:564
#6 0x7f38af69330e in wlr_signal_emit_safe ../subprojects/wlroots/util/signal.c:29
#7 0x7f38af5d3dfc in drm_connector_cleanup ../subprojects/wlroots/backend/drm/drm.c:1448
#8 0x7f38af5d2058 in scan_drm_connectors ../subprojects/wlroots/backend/drm/drm.c:1240
#9 0x7f38af5c6a59 in drm_invalidated ../subprojects/wlroots/backend/drm/backend.c:135
#10 0x7f38af69330e in wlr_signal_emit_safe ../subprojects/wlroots/util/signal.c:29
#11 0x7f38af5e827a in udev_event ../subprojects/wlroots/backend/session/session.c:52
#12 0x7f38aef5d7f1 in wl_event_loop_dispatch (/usr/lib/libwayland-server.so.0+0xa7f1)
previously allocated by thread T0 here:
#0 0x7f38af82e5a1 in __interceptor_calloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:95
#1 0x560c1acbc228 in output_create ../sway/tree/output.c:91
#2 0x560c1ac17ba2 in handle_new_output ../sway/desktop/output.c:656
#3 0x7f38af69330e in wlr_signal_emit_safe ../subprojects/wlroots/util/signal.c:29
#4 0x7f38af5e4ce8 in new_output_reemit ../subprojects/wlroots/backend/multi/backend.c:143
#5 0x7f38af69330e in wlr_signal_emit_safe ../subprojects/wlroots/util/signal.c:29
#6 0x7f38af5d26d4 in scan_drm_connectors ../subprojects/wlroots/backend/drm/drm.c:1294
#7 0x7f38af5c6a59 in drm_invalidated ../subprojects/wlroots/backend/drm/backend.c:135
#8 0x7f38af69330e in wlr_signal_emit_safe ../subprojects/wlroots/util/signal.c:29
#9 0x7f38af5e827a in udev_event ../subprojects/wlroots/backend/session/session.c:52
#10 0x7f38aef5d7f1 in wl_event_loop_dispatch (/usr/lib/libwayland-server.so.0+0xa7f1)
SUMMARY: AddressSanitizer: heap-use-after-free ../sway/desktop/output.c:566 in handle_destroy
Shadow bytes around the buggy address:
0x0c287fffadc0: fa fa fa fa fa fa fa fa fd fd fd fd fd fd fd fd
0x0c287fffadd0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c287fffade0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c287fffadf0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c287fffae00: fa fa fa fa fa fa fa fa fd fd fd fd fd fd fd fd
=>0x0c287fffae10: fd[fd]fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c287fffae20: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c287fffae30: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fa fa
0x0c287fffae40: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
0x0c287fffae50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c287fffae60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Retrieve the reference before the output is destroyed and update the
output_management state with the saved reference.
Subsurfaces need access to the parent get_root_coords impl for positioning in
popups. To do this, we store a reference to the parent view_child where
applicable.
Fixes#4191.
This changes the behavior of bindings to make the `BINDING_LOCKED` flag
conflicting, which will allow for both unlocked and locked bindings.
If there are two matching bindings and one has `--locked` and the other
does not, the one with `--locked` will be preferred when locked and
the one without will be preferred when unlocked.
If there are two matching bindings and one has both a matching
`--input-device=<input>` and `--locked` and the other has neither, the
former will be preferred for both unlocked and locked.
This also refactors `get_active_binding` in `sway/input/keyboard.c`
to make it easier to read.
This just changes the indentation of `sway/input/switch.c` to use
tabs instead of spaces since I messed up and missed it when approving
the PR that added the file.
For compatibility with i3, `bar mode` and `bar hidden_state` do not
require bar-ids (in the normal location) at runtime since they follow
the alternative syntax: `bar mode|hidden_state <option> [<bar-id>]`
This removes the incorrect error that the bar-id is missing for those
two bar subcommands
Running a command like this produced a confusing error message:
$ swaymsg bar bar-0 colors background #ff0000
Error: Unknown/invalid command 'bar-0'
This patch makes the error message use argv[1] instead of argv[0] (from
config_subcommand's implementation), so it actually uses the name of the
command, rather than the id of the bar.
Prior to this patch, if I ran something like this, sway would crash:
swaymsg bar height 50
or
swaymsg bar not-a-bar-id color bg #ff0000
This was in contrast to other bar subcommands, like status_command,
which would exit with a "No bar defined" message.
The difference between the subcommands that crashed and the ones that
exited was that some subcommands had a check to see if a bar was
specified, while others just assumed that it had been and carried on
until they segfaulted.
Because this check was identical in every subcommand it was present in,
and I couldn't think of a case where it would be valid to run a bar
subcommand without specifying which bar to apply it to, I moved this
check from individual subcommands into the bar command, which is already
responsible for actually setting the specified bar. This reduced code
duplication, and fixed the crash for the subcommands that were missing
this check.
This attempts to use the default keymap when the one defined in the
input config fails to compile. The goal is to make it so the keyboard
is always in a usable state, even if it is not the user's requested
settings as usability is more important.
This also removes the calls to `getenv` for the `XKB_DEFAULT_*` family
of environment variables. The reasoning is libxkbcommon will fallback
to using those (and then the system defaults) when any of the rule
names are `NULL` or an empty string anyway so there is no need for
sway to duplicate the efforts.
This fixes a typo in `merge_id_on_name` for output configs that
resulted in incorrect id-on-name output configs being generated.
Instead of using the output that matched the name or identifier, the
first output in the list was being used instead. This could cause
merging across unrelated output configs and preventing output configs
from being applied correctly
When reloading, this destroys the old config's swaybg client before
spawning the new config's swaybg. This fixes a race condition where the
old config's swaybg client's destroy was being called after the new
config's swaybg client was being spawned. This was causing the
reference to the new swaybg client to be removed and never destroyed.
This also modifies handle_swaybg_client_destroy to grab the config
reference using wl_container_of on the listener since the swaybg client
may be the old config swaybg client and should be used instead of the
global config instance
In case a set_mode/unset_mode request is sent before the first commit, we need
to handle the value and send our preference accordingly.
This fixes xdg-decoration support for Qt apps.
This clarifies that `workspace <name> output <outputs...>` and
`workspace <name> gaps ...` do not operate on existing workspaces.
Additionally, alternate commands/solutions that operate on existing
workspaces are listed.
This adds support for the following commands for i3 compatibility:
- `move [window|container] [to] output current`
- `move workspace to [output] current`
- `move workspace [to] output current`
The above commands are only useful when used with criteria.
* `bindsym --to-code` enables keysym to keycode translation.
* If there are no `xkb_layout` commands in the config file, the translation
uses the XKB_DEFAULT_LAYOUT value.
* It there is one or more `xkb_layout` command, the translation uses
the first one.
* If the translation is unsuccessful, a message is logged and the binding
is stored as BINDING_KEYSYM.
* The binding keysyms are stored and re-translated when a change in the input
configuration may affect the translated bindings.
The new upstream is https://github.com/swaywm/swaybg
This commit also refactors our use of gdk-pixbuf a bit, since the only
remaining reverse dependency is swaybar tray support.
When moving a container to become a direct child of the workspace and
the workspace's layout is tabbed or stacked, wrap it in a container
with the same layout. This allows for the following:
- Run `layout tabbed|stacked` on an empty workspace (or use
`workspace_layout tabbed|stacked` in the config)
- Open some views
- Move one of the views in any direction
- Open another view
- The new container should also be `tabbed`/`stacked`
This fixes the criteria for emitting a `bar_state_update` event to
notify swaybar (and any other bars utilizing the event) on whether the
bar is visible by modifier. It is not enough to only emit the event
when both the bar mode and bar hidden state are `hide` since it is
possible to release the modifier while hidden state is `show` and then
change hidden state to `hide` without pressing the modifier. This also
emits the event whenever visible by modifier is set and should no
longer be regardless of the mode and state to ensure that it gets
properly cleared. If visible by modifier is not set and the bar is not
in `hide`/`hide`, then no events will be sent and visible by modifier
will not be set
This modifies cmd_move to allow for the syntax options allowed by i3.
The following syntaxes are supported:
- `move left|right|up|down [<amount> [px]]`
- `move [--no-auto-back-and-forth] [window|container] [to] workspace
<name>|next|prev|next_on_output|prev_on_output|current|number <num>`
- `move [window|container] [to] output <name/id>|left|right|up|down`
- `move [window|container] [to] mark <mark>`
- `move workspace to [output] <name/id>|left|right|up|down`
- `move [window|container] [to] [absolute] position <x> [px] <y> [px]`
- `move [window|container] [to] [absolute] position center`
- `move [window|container] [to] position mouse|cursor|pointer`
This also allows retains the following syntax option that is not
supported by i3, but is supported in sway 1.0:
- `move workspace [to] output <name/id>|left|right|up|down`
The changes are:
- `window` and `container` are now optional
- `output` is now optional for `move workspace` when `to` is given
There is also stricter command checking now. If `absolute` or
`--no-auto-back-and-forth` are given for commands that do not support
them, it will be treated as invalid syntax instead of being silently
ignored.
Disable the i3-compatible behavior if the option '--i3' is not given.
Previously it was only possible to disable it by changing the config
file. Now it also works via swaymsg.
If a client is subscribed and sends a subsequent ipc command which
causes event updates, then those event updates override the
`client->current_command` and send the incorrect type for the payload
associated with the command.
Example:
SUBSCRIBE {window}
RUN_COMMAND focus -> PAYLOAD_TYPE is 0x80000002 for window events
Therefore, we decouple the `client->current_command` by passing it as an
argument to the ipc_send_reply function, avoiding a data race. The same
is done for the `client->payload_length` as a precautionary measure for
the same reason.
Add support for configurations that apply to a type of inputs
(i.e. natural scrolling on all touchpads). A type config is
differentiated by a `type:` prefix followed by the type it
corresponds to.
When new devices appear, the device config is merged on top of its
type config (if it exists). New type configs are applied on top of
existing configs.
Use libinput_device_config_tap_get_finger_count to determine whether
a pointer is a touchpad.
swaymsg is also updated to reflect the new touchpad type.
When setting fullscreen on a hidden scratchpad container, there was a
check to see if there was an existing fullscreen container on the
workspace so it could be fullscreen disabled first. Since the workspace
is NULL, it would cause a SIGSEGV. This adds a NULL check to avoid the
crash.
This also changes the behavior of how fullscreen is handled when adding
a container to the scratchpad or changing visibility of a scratchpad
container to match i3's. The behavior is as follows:
- When adding a container to the scratchpad or hiding a container back
into the scratchpad, there is an implicit fullscreen disable
- When setting fullscreen on a container that is hidden in the
scratchpad, it will be fullscreen when shown (and fullscreen disabled
when hidden as stated above)
- When setting fullscreen global on a container that is hidden in the
scratchpad, it will be shown immediately as fullscreen global. The
container is not moved to a workspace and remains in the
scratchpad. The container will be visible until fullscreen disabled
or killed. Since the container is in the scratchpad, running
`scratchpad show` or `move container to scratchpad` will have no
effect
This also changes `container_replace` to transfer fullscreen and
scratchpad status.
When a tiled window is sent to the scratchpad, we want to use sane
defaults, which is to center it and resize it to the default.
For floating windows, we want to use their existing geometry.
This honors the fullscreen output request for
`xdg_toplevel_set_fullscreen` and `zxdg_toplevel_v6_set_fullscreen`.
If the request was sent before mapping, the fullscreen output request
will be retrieved from the client_pending state for the toplevel. The
output will be passed to `view_map` and if there is a workspace on the
output, the view will be placed on that workspace.
If the request comes in after being mapped, the view will be moved to
the workspace on the output (if there is one) before becoming
fullscreen.
This makes it so there will only be one swaybg instance running
instead of one per output. swaybg's cli has been changed to a xrandr
like interface, where you select an output and then change properties
for that output and then select another output and repeat. This also
makes it so swaybg is only killed and respawned when a background
changes or when reloading.
This fixes a crash for application set idle inhibitors when their
associated view is being destroyed. There is a call to
`view_is_visible` to determine is the view is visible and it assumes
that the view has an container, but it is possible for the container
to already have been destroyed at this point. There is a NULL check for
the view in `check_active` and this re-adds the NULL check for the
container that I accidentally dropped when refactoring during the
inhibit_idle command PR
This fixes a crash in `root_scratchpad_hide` when a layer surface is
focused. Since `seat_get_focus` is NULL when a layer surface is
focused, the call to `node_has_ancestor` was causing a SIGSEGV since it
was attempting to access the parent of NULL. This changes the call to
`seat_get_focus_inactive`, which will return a node even when a layer
surface is focused and is also guaranteed to have something in the
focus stack if a scratchpad container is being hidden (otherwise there
would not be any containers yet).
This matches i3's behavior of setting scratchpad containers to 50% of
the workspace's width and 75% of the workspace's height, bound by the
minimum and maximum floating width/height.
This fixes the sizing of floating non-view containers. On master, the
floater will get set to the maximum width and height, which by default
is the entire output layout. When setting a non-view container to
floating, this will set a sane default size of 50% of the workspace
width and 75% of the workspace height, or whatever the closest is that
the minimum and maximum floating width/height values allow for. On all
future calls to `floating_natural_resize`, the width and height will be
kept unless they need to be changed to respect the min/max floating
width/height values.
This fixes a crash in `container_init_floating` when a xwayland view
sends a configure request while in the scratchpad.
`container_init_floating` gets called so the configured minimum and
maximum sizes gets respected when resizing to the requested size. Since
the workspace was NULL, it would SIGSEGV when attempting to get the
workspace's output for the output box retrieval.
This extracts the resizing portion of `container_init_floating` into a
separate function. If the container is in the scratchpad, it will just
be resized and skip the centering.
Additionally, `container_init_floating` has been renamed to
`container_floating_resize_and_center` to more accurately describe what
it does.
This implements the following command to set/unset a user idle
inhibitor for a view:
`inhibit_idle focus|fullscreen|open|none|visible`
The modes are as follows:
- focus: inhibited when the view is focused by any seat
- fullscreen: inhibited when the view is fullscreen (or a descendant of
a fullscreen container) and is visible on any output
- open: inhibited until the view is closed or the inhibitor is unset or
changed
- none: unsets any user set idle inhibitors for the view
- visible: inhibited when the view is visible on any output
This should have no effect on idle inhibitors set by the applications
themselves and those should still work as intended.
Since this operates on the view in the handler context, it is possible
to set it on the currently focused view, on any existing view with
criteria, or for any future view with for_window.
Removes "unescape_string(argv[i]);".
Since "do_var_replacement(argv[i])" never adds escape
characters, it is both wrong and unnecessary to remove escape characters
on the next line.
This caused characters that were meant to be escaped to not be anymore.
Many laptop screens report unknown subpixel order. Allow users to manually set subpixel hinting to work around this.
Addresses https://github.com/swaywm/sway/issues/3163
This change adds support for renaming a workspace when `exec` command
is being processed by keeping sway_workspace and pid_workspace names in
sync.
The change can be verified by running following command:
swaymsg exec <application>; swaymsg rename workspace number 1 to 5
Fixes: #3952
Since the NOOP output has no size, the minimum floating size is greater
than the workspace size for the NOOP output. In this case, the floater
gets centered in the output instead of the workspace. However, the
NOOP output is not part of the output layout and thus has a NULL box.
Attempting to access the properties of this box was causing a segfault.
This fixes the issue by just setting the floater's box to all zeroes
when mapping on the NOOP output. When the workspace gets moved from the
NOOP output to a new output, any floater whose width or height is zero
or has an x or y location outside of the output, gets passed to
`container_init_floating` again. This will then set the appropriate
size and centering. For any floater that has a valid size and location,
they are preserved.
This fixes the behavior of `__focused__` when there is no focused view
to match i3's behavior of successfully matching no views instead of
returning an error of a missing value. It also applies the same logic
when a token is not applicable (or unset) for a view such as `app_id`
for a focused xwayland view or `class` for a focused xdg-shell view.
This adds an `autofail` boolean to `struct criteria`. If it is set to
`true`, then `criteria_matches_view` will immediately bail out as a
no match. If `autofail` is set, the criteria will also not be
considered empty by `criteria_is_empty`.
To set this new `autofail` property, `get_focused_prop` will now take
in a boolean pointer of the same name. If `__focused__` is supported
for the token and there is no focused view or the focused view does not
have a value for the token, then the boolean will be set to true. In
`parse_token`, the boolean value will be checked and if set to true,
then `criteria->autofail` will be set to true and `parse_token` will
bail successfully. Tokens will still be parsed to make sure the whole
criteria is syntactically valid, which is also why
`&criteria->autofail` is not passed to `get_focused_prop` and a local
boolean is declared in `parse_token`.
This kind of worked before in that focus would change, but it wasn't
intentionally supported and had side effects such as not raising
the container, and being unable to cycle through all floaters depending
on the direction used.
This commit makes it properly supported. The new focus is chosen based
on the distance to the center point of each floating container in the
workspace, and the container is raised.
In a multi output setup, if both visible workspaces have floating
containers, focus will NOT cross into the other output. It is assumed
the user will use a workspace binding in this case.
If two floating containers occupy the exact same center point and you
try to focus in a direction, the behaviour is undefined.
This commit adds support for laptop lid and tablet
mode switches as provided by evdev/libinput and
handled by wlroots.
Adds a new bindswitch command with syntax:
bindswitch <switch>:<state> <command>
Where <switch> is one of:
tablet for WLR_SWITCH_TYPE_TABLET_MODE
lid for WLR_SWITCH_TYPE_LID
<state> is one of:
on for WLR_SWITCH_STATE_ON
off for WLR_SWITCH_STATE_OFF
toggle for WLR_SWITCH_STATE_TOGGLE
(Note that WLR_SWITCH_STATE_TOGGLE doesn't map to
libinput and will trigger at both on and off events)
Firstly, this fixes a recent regression where having
`focus_follows_mouse yes` and hovering an inactive tab caused it to gain
focus. The code was missing a view_is_visible check.
The code is handling the logic for both focus_follows_mouse yes and
focus_follows_mouse always, where the latter will apply when nudging the
mouse after a workspace switch. However, the view_is_visible check
didn't apply when using focus_follows_mouse always, so hovering a tab
with that configuration would cause is to focus. This was a bug. When
adding the view_is_visible check, it now applies to both yes and always.
Note that the comment about the split container was wrong. At this point
the hovered node cannot be a split container because it passed the
node_is_view check. The comment has been removed.
Lastly, the else condition is completely removed. This didn't appear to
have any practical use. Setting focus to the result of
seat_get_focus_inactive is very likely going to be a no op. There is a
slim chance that this will break something, and if so I'd like to find
out what so it can be properly documented in the code.
In #3916, I overlooked that `get_output_config` does not handle
wildcards unless the config is reloading, which is a remnant of older
iterations of the output config handling that went unnoticed due to
`output_find_config` handling it. With the current version of the
output config handling, having `get_output_config` handle wildcard
configs is actually preferable. This fixes having only a wildcard
output config in the config file or when connecting/enabling a new
output with only a wildcard config existing.
This introduces a `default` seat operation which is used when no mouse
buttons are being held. This means there is now always a seat operation
in progress. It allows us to separate `default` code from the standard
cursor management code.
The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and
`end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are
only used by the default seatop. `end` is called when a seatop is being
replaced by another one and allows the seatop to free any resources,
though no seatop currently needs to do this. `finish` is no longer
required, as each seatop can gracefully finish in their `button`
callback. And `abort` is not needed, as calling `end` would achieve the
same thing. The struct has also gained a bool named allow_set_cursor
which allows the client to set a new cursor during `default` and `down`
seatops.
Seatops would previously store which button they were started with and
stop when that button was released. This behaviour is changed so that it
only ends once all buttons are released. So you can start a drag with
$mod+left, then click and hold right, release left and it'll continue
dragging while the right button is held.
The motion callback now accepts dx and dy. Most seatops don't use this
as they store the cursor position when the seatop is started and compare
it with the current cursor position. This approach doesn't make sense
for the default seatop though, hence why dx and dy are needed.
The pressed_buttons array has been moved from the sway_cursor struct to
the default seatop's data. This is only used for the default seatop to
check bindings. The total pressed button count remains in the
sway_cursor struct though, because all the other seatops check it to
know if they should end.
The `down` seatop no longer has a `moved` property. This was used to
track if the cursor moved and to recheck focus_follows_mouse, but seems
to work without it.
The logic for focus_follows_mouse has been refactored. As part of this
I've removed the call to wlr_seat_keyboard_has_grab as we don't appear
to use keyboard grabs.
The functions for handling relative motion, absolute motion and tool
axis have been changed. Previously the handler functions were
handle_cursor_motion, handle_cursor_motion_absolute and
handle_tool_axis. The latter two both called cursor_motion_absolute.
Both handle_cursor_motion and cursor_motion_absolute did very similar
things. These are now simplified into three handlers and a single common
function called cursor_motion. All three handlers call cursor_motion. As
cursor_motion works with relative distances, the absolute and tool axis
handlers convert them to relative first.
This revamps the way that output configs are handled when referencing
an output by both identifier and name. If an output is always referred
to by name or by identifier, this should have no noticeable change. As
soon as there is a name output config and an identifier output config
that matches an output, an output config is generated that is named
`<identifier> on <name>` that is generated with the identifier output
config merged on top of the name output config and stored. When a
change to either is stored, the delta is merged on top of that
"id on name" output config, as well. If the "id on name" output config
exists, it has the highest precedence and will be used when applying
a config to the output.
This fixes the following case:
- `swaymsg output <name> bg /path/to/wallpaper1 fill`
- `swaymsg output <identifier> bg /path/to/wallpaper2 fill`
- `swaymsg output <name> dpms on`
Without this, the wallpaper is changed to `/path/to/wallpaper1`. With
this, the wallpaper remains `/path/to/wallpaper2`.
This removes `output_find_config`, which would take the first matching
output config it found. This is fine if only a name output config,
identifier output config, or even just wildcard exist, but if there is
a name output config and identifier output config, they are not merged.
Instead, this introduces find_output_config, which is just a wrapper
for `get_output_config`. This ensures that both the name and identifier
output configs are respected.
This fixes the following case:
- For simplicity in this example, remove all output configs from config
- Run `swaymsg output <name> bg #ff0000 solid_color`
- Run `swaymsg output <identifier> scale 2`
- Disconnect and reconnect output
Without this, the output will have the background, but not the scale.
With this, the output will have both the background and scale
E.g. `for_window [class="mpv"] move container to output "Dell Inc. ..."`
does not work because the executed move command only uses `Dell` as
output name.
This moves setting `seat->prev_workspace_name` from `workspace_switch`
to `set_workspace`. `workspace_switch` is only called when using a
`workspace` command to change the workspace so any workspace change
based on criteria was not altering `seat->prev_workspace_name`. By
moving it to `set_workspace`, which is called by `seat_set_focus`, it
will change any time focus changes to a node on a different workspace
This makes it so the container gets resized by a configure request for
xwayland floating views. The minimum and maximum sizes are also
respected. Previously, the configure request was resizing the surface
to the size requested, but never changing the container size. This
caused the surface to be rendered outside of the container or to be
smaller than the container. The former is never ideal and the latter
makes no sense for floating views since the container itself can just
be shrunk.
This fixes the decoration rects for floating containers on a workspace
that is either tabbed or stacked. Without this, the floater would
incorrectly try to calculate where it's tab or stack decorations were
on the workspace. This would cause a SIGFPE (due to a divide-by-zero)
when the floater was on a tabbed workspace without any tiling children.
Furthermore, the floater does not care what the workspace's layout is
and should just use the location relative to the workspace. This should
have no effect on children of a floating container.
By the time seatop_allows_events was called, seatop_impl was already
NULL, causing the function to always return false. This means a press
event was sent to clients without a corresponding release event.
This patch moves the call to seatop_finish to after the
seatop_allows_events check.
It turns out sending button events during all seat operations is not
desirable. This patch introduces a new property
`seatop_impl.allows_events` which allows each operation to define
whether button events should be passed to the surface or not.
The `down` seat operation is the only one that supports this. As all the
other seatops don't support it, the calls to seat_pointer_notify_button
prior to starting them have been removed.
Since not all child views's have an unmap event, it is possible for it
to still be mapped (default state) in the destruction handler. When
the destruction handler is called, the corresponding view may have
already been freed and the memory location reallocated. This adds a
listener for the view unmapping and removes the mapped status. This
ensures that the child view is damaged due to destruction while the
view still exists and not after.
If a container gets mapped as fullscreen and set to floating by
criteria, the size and location are never set for the floating
container. This adds a check in container_fullscreen_disable for a
width or height of 0 and calls container_init_floating
This changes `apply_tabbed_layout` and `apply_stacked_layout` to use
`int` instead of `size_t`. This is necessary for tabbed and stacked
containers to be positioned correctly when the y-location is negative.
The reasoning for this is signed plus unsigned is always an unsigned
value. This was causing the y-location of the container to be
positioned near `INT_MIN` due to an unsigned integer underflow
This removes `output_damage_view` since it is unnecessary. The logic
has been moved into its only caller `output_damage_from_view`. When
damaging the whole view, `output_damage_whole_container` should be used
instead
This adds an iterative call in `output_damage_whole_container` to
damage the subsurfaces for all visible views that are inside of the
container. This is needed to damage subsurfaces that extend outside the
box of the container. Without this, those subsurfaces will create
artifacts when moving or resizing.
This adds the device configurations to the ipc response for libinput
devices. Only supported configuration options for the device will be
added. This also moves `libinput_send_events` inside a new `libinput`
object that contains the rest of the configuration options. sway-ipc(7)
has been updated to reflect the changes and document the new additions.
This fixes the deco_rect reported by the ipc for fullscreen containers
to be all zeroes. Children of the fullscreen container should still
have their decorations reported correctly
This fixes the `deco_rect` and `rect` properties in the IPC responses
to match i3's behavior.
`deco_rect` should be relative to the parent node, not the current
node. This also takes tabbed and stacked decorations into account and
will calculate `deco_rect` for all containers since tabbed and stacked
child containers will have decorations.
`rect` should exclude the window decorations.
If two cursor buttons are pressed at the same time, the client will now
be notified of the second button press.
The main reason for not sending the concurrent presses was due to an
early return in dispatch_cursor_button if a seatop is in progress. This
patch makes it call seat_pointer_notify_button prior to returning. But
it also has to make sure there's not a mismatch in events such as a
release without a press.
Prior to this patch, the down seatop would send press and release events
in its begin and finish functions. No other seatops did this. A press
event would be sent prior to starting tiling drag, but never an
associated release.
After this patch, no seatops send their own press or release events. We
send them prior to calling the seatop begin functions, then the first
part of dispatch_cursor_button handles all presses during seatops and
when releasing the seatop.
If a floater is fullscreen either on a workspace or globally, it
should not be rendered on any output is is not fullscreened on. When
rendering it on an output it should not be rendered on, there will be
an extraneous border along the adjacent side of the output. This adds
a check in render_floating to skip all fullscreened floaters
This changes the way zero (which is the default) is interpreted for both
the width and height of `floating_maximum_size`. It now refers to the
width and height of the entire output layout, which matches i3's
behavior.
This also removes duplicated code to calculate the floating constraints
in three files. Before this, `container_init_floating` used two-thirds
of the workspace width/height as the max and the entire workspace
width/height was used everywhere else. Now, all callers use a single
function `floating_calculate_constraints`.
All seat operations except "down" eat the button pressed event and don't send
it to clients. Thus, when ending such seat operations we shouldn't send the
button released event.
This commit moves the logic used to send pressed/released into the "down"
operation.
According to the i3 ipc documentation, `window_rect` excludes the window
decorations from the calculation. This just clarifies that in
`sway-ipc.7.scd`
This add `sway-ipc.7.scd` that documents the IPC protocol.
This also increased the minimum scdoc version from 1.8.1 to 1.9.0 to
allow for table cells to be continued on the following line
`cmd_mode` performs its own quote stripping for the mode string to
avoid double stripping quotes for `cmd_bindcode` and `cmd_bindsym` in
`config_command` and `execute_command`. Stripping quotes in
`execute_command` for `cmd_mode` will also result in double stripping,
which will cause issues for any mode string with spaces, such as pango
markup.
Enables i3-compatible behavior regarding hiding the title bar on tabbed and
stacked containers with one child.
Related issues and merge requests: #3031, #3002, #2912, #2987.
container_floating_move_to_center and container_fullscreen_disable were
calling recursively when the container spawned as a fullscreen floating
container (via for_window). Such a window now doesn't crash sway anymore
but is still configured with a wrong, zero size, making it not directly
usable.
i3 requires all outputs to have certain fields, including 'primary', 'current_workspace', and 'rect' which were missing on disabled outputs.
https://i3wm.org/docs/ipc.html#_outputs_reply
If an unmanaged or layer surface is focused when an output gets
disabled and an empty workspace on the output was focused by the seat,
the seat needs to refocus it's focus inactive to update the value of
`seat->workspace`.
If the noop output is focused (all other outputs disabled/disconnected),
do not auto assign a layer surface to it. The noop output is not enabled
and does not have the `output->layers` list initialized. It also does
not make sense to map the layer surfaces to something that is not
visible.
Fixes heap-use-after-free:
==32046==ERROR: AddressSanitizer: heap-use-after-free on address 0x615000064d20 at pc 0x55571ce4d303 bp 0x7fff545c64c0 sp 0x7fff545c64b0
WRITE of size 8 at 0x615000064d20 thread T0
#0 0x55571ce4d302 in xdg_decoration_handle_destroy ../sway/xdg_decoration.c:13
#1 0x7f64009d6f36 in wlr_signal_emit_safe ../util/signal.c:29
#2 0x7f64009d3c46 in toplevel_decoration_handle_resource_destroy ../types/wlr_xdg_decoration_v1.c:65
#3 0x7f6400a19f8d (/usr/lib/x86_64-linux-gnu/libwayland-server.so.0+0x7f8d)
#4 0x7f6400a19fed in wl_resource_destroy (/usr/lib/x86_64-linux-gnu/libwayland-server.so.0+0x7fed)
#5 0x7f64009d3d1f in toplevel_decoration_handle_surface_destroy ../types/wlr_xdg_decoration_v1.c:82
#6 0x7f64009d6f36 in wlr_signal_emit_safe ../util/signal.c:29
#7 0x7f64009b059c in reset_xdg_surface ../types/xdg_shell/wlr_xdg_surface.c:453
#8 0x7f64009b0688 in destroy_xdg_surface ../types/xdg_shell/wlr_xdg_surface.c:483
#9 0x7f64009af08c in xdg_client_handle_resource_destroy ../types/xdg_shell/wlr_xdg_shell.c:71
#10 0x7f6400a19f8d (/usr/lib/x86_64-linux-gnu/libwayland-server.so.0+0x7f8d)
#11 0x7f6400a1e211 (/usr/lib/x86_64-linux-gnu/libwayland-server.so.0+0xc211)
#12 0x7f6400a1e6fe (/usr/lib/x86_64-linux-gnu/libwayland-server.so.0+0xc6fe)
#13 0x7f6400a1a0ec in wl_client_destroy (/usr/lib/x86_64-linux-gnu/libwayland-server.so.0+0x80ec)
#14 0x7f6400a1a1c4 (/usr/lib/x86_64-linux-gnu/libwayland-server.so.0+0x81c4)
#15 0x7f6400a1b941 in wl_event_loop_dispatch (/usr/lib/x86_64-linux-gnu/libwayland-server.so.0+0x9941)
#16 0x7f6400a1a569 in wl_display_run (/usr/lib/x86_64-linux-gnu/libwayland-server.so.0+0x8569)
#17 0x55571ce4c7fd in server_run ../sway/server.c:214
#18 0x55571ce4ad59 in main ../sway/main.c:405
#19 0x7f640071109a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)
#20 0x55571ce2cfa9 in _start (/usr/local/bin/sway+0x35fa9)
0x615000064d20 is located 32 bytes inside of 504-byte region [0x615000064d00,0x615000064ef8)
freed by thread T0 here:
#0 0x7f6401531b70 in free (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedb70)
#1 0x55571ce6c72b in destroy ../sway/desktop/xdg_shell.c:252
#2 0x55571cee3f7b in view_destroy ../sway/tree/view.c:60
#3 0x55571cee4090 in view_begin_destroy ../sway/tree/view.c:73
#4 0x55571ce6dd95 in handle_destroy ../sway/desktop/xdg_shell.c:464
#5 0x7f64009d6f36 in wlr_signal_emit_safe ../util/signal.c:29
#6 0x7f64009b059c in reset_xdg_surface ../types/xdg_shell/wlr_xdg_surface.c:453
#7 0x7f64009b0688 in destroy_xdg_surface ../types/xdg_shell/wlr_xdg_surface.c:483
#8 0x7f64009af08c in xdg_client_handle_resource_destroy ../types/xdg_shell/wlr_xdg_shell.c:71
#9 0x7f6400a19f8d (/usr/lib/x86_64-linux-gnu/libwayland-server.so.0+0x7f8d)
previously allocated by thread T0 here:
#0 0x7f6401532138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138)
#1 0x55571ce6df39 in handle_xdg_shell_surface ../sway/desktop/xdg_shell.c:485
#2 0x7f64009d6f36 in wlr_signal_emit_safe ../util/signal.c:29
#3 0x7f64009b0167 in handle_xdg_surface_commit ../types/xdg_shell/wlr_xdg_surface.c:350
#4 0x7f64009ce2a5 in surface_commit_pending ../types/wlr_surface.c:372
#5 0x7f64009ce523 in surface_commit ../types/wlr_surface.c:444
#6 0x7f63ff63ddad in ffi_call_unix64 (/usr/lib/x86_64-linux-gnu/libffi.so.6+0x5dad)
Fixes#3759
This makes it so running `move [to] scratchpad` on a container already
in the scratchpad does not return an error. To match i3's behavior, a
visible scratchpad container will be hidden and a hidden scratchpad
container will be treated as a noop.
This modifies the places where output_get_active_workspace is called to
handle a NULL result. Some places already handled it and did not need a
change, some just have guard off code blocks, others return errors, and
some have sway_asserts since the case should never happen. A lot of this
is probably just safety precautions since they probably will never be
called when `output_get_active_workspace` is not fully configured with a
workspace.
If an output's node was dirty and the transaction was committed before a
workspace was moved to or created for the output, the instruction would
have a bad value for `state->active_workspace` due to a missing
length check in `output_get_active_workspace`. If there was no focus on
the output, the first workspace was being returned. If the workspace
list was currently empty, the value was either garbage, or in the case of
an output being disabled and re-enabled, a workspace that may have been
previously freed. This just adds the length check to avoid returning out
of bounds value.
Fixes memory leaks in the form of:
Direct leak of 24 byte(s) in 1 object(s) allocated from:
#0 0x7f5f7c2f4f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30)
#1 0x563c799569f2 in ipc_recv_response ../common/ipc-client.c:94
#2 0x563c79957062 in ipc_single_command ../common/ipc-client.c:138
#3 0x563c798a56cc in run_as_ipc_client ../sway/main.c:127
#4 0x563c798a6a3a in main ../sway/main.c:349
#5 0x7f5f7b4d609a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)
Fixes memory leaks in the form of:
Direct leak of 20 byte(s) in 1 object(s) allocated from:
#0 0x7f5f7c2f4f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30)
#1 0x563c7995b36a in join_args ../common/stringop.c:268
#2 0x563c798a6a1a in main ../sway/main.c:348
#3 0x7f5f7b4d609a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)
This calls `workspace_consider_destroy` on the workspace that was
visible on an output that a workspace was just evacuated to. This
prevents having hidden empty workspaces.
This changes `workspace_next_name` to use the next available number as
the workspace name instead of the number of outputs. This fixes the case
where a number that is already in use could be returned. The workspace
numbers in use have no relation to the number of outputs so it makes
more sense to use the lowest available number
This documents the wildcard character for both inputs and seats. There
is also a tip added on trying the wildcard to verify a setting if the
identifier does not appear to be working.
This fixes the issue of the display freezing on reload with
wlroots#1545.
On master, all output configs are applied on reload. This may cause an
output to have its config applied up to three times, instead of just
once. The three cases are: output name, output identifier, and wildcard.
Not only is this inefficient, but it can cause swaybg to be spawned and
immediately killed.
However, swaybg requires two roundtrips of wl_display (to obtain needed
globals) before it enters its normal event loop. Modesetting will
roundtrip the wl_display. Without modesetting, waitpid for killing
swaybg could block infinitely due to swaybg being blocked by
wl_display_roundtrip.
This only configured an output once. It either uses the wildcard config
or creates an empty wildcard config and applies that. This also fixes a
bug where an output would not be reset when there is no output config to
apply to it.
On the DRM backend, if an output is dpms'd off and a different output is
hotplugged, the CRTC for the output is reclaimed. When modesetting an
output without a CRTC, a CRTC will not be given to an output that is not
desired to be enabled. This splits setting the dpms state in
apply_output_config. If the output should be dpms on, the it is enabled
before attempting to modeset. Otherwise, it is dpms'd off after setting
everything else.
This also adds DPMS_ON to the default output configs.
In seatop_move_tiling, it is possible to cause a stack overflow by
dragging a container into one of its descendants. This disables the
ability to move into a descendant.
This allows the focused inactive tree node and visible workspaces to be
changed while a surface layer has focus. The layer temporarily loses
focus, the tree focus changes, and the layer gets refocused.
When moving a descendant of a tabbed or stacked container, it is possible
for the target node to be the node being moved. This causes a segfault in
`handle_finish` since the node will be detached and then attempted to be
attached to it own parent, which is NULL due to the detach. In this
case, the target node should not be set to the node being moved, but the
parent of the node. This also allows for a descendant of a tabbed or
stacked container to be dragged out of the tabs/stacks and to be a
sibling of the tabbbed/stacked container, which was not previously
possible.
lbonn
Robert Günzler
Simon Ser
Ronan Pigott
Kirill Chibisov
Danilo Spinella
A. M. Joseph
Drew DeVault
Rouven Czerwinski
Wieland Hoffmann
Arkadiusz Hiler
Sebastian Krzyszkowiak
John Chadwick
Brian Ashworth
Ivan Molodetskikh
Martin Michlmayr
Nils ANDRÉ-CHANG
Versus Void
xPMo
Ben Brown
Kenny Levinsen
xdavidwu
asdfjkluiop
Michael Aquilina
Dark
Laurent Bonnans
Ilia Bozhinov
Antonin Décimo
Jeff Peeler
Paul Ouellette
Pedro Côrte-Real
Ashkan Kiani
Ed Younis
Josef Gajdusek
Sauyon Lee
Sebastian Parborg
Sergei Dolgov
random human
murray
Robert Sacks
Matt Coffin
Alex Maese
Aidan Harris
Daniel Eklöf
Alyssa Ross
Nomeji
Moelf
Lane Surface
Konstantin Pospelov
Scott Anderson
mwenzkowski
Ranieri Althoff
Connor E
Benjamin Cheng
Benjamin Cheng
Jan Beich
Ryan Dwyer
Jan Pokorný
Philipe Goulet
Geoff Greer
mliszcz
Ryan Walklin
minus
Ian Fan
Ben Challenor
Noam Preil
hugbubby
Carlo Abelli
Milkey Mouse
db
Caleb Bassi
Eric Drechsel
Yorick van Pelt
Vincent Vanlaer