This isn't the right fix for this issue because the xwayland code also
uses this function and updating the wlr_toplevel there doesn't make
sense and also causes problems. Fixes#7722.
This reverts commit bf44690ee8.
If a floating client resizes itself, sway updates several of its
internal dimensions to match but not wlr_toplevel. This means that the
next time wlroots sends a toplevel configure event, it can have wrong
coordinates that resize the client back to its old size. To fix this,
let's just use wlr_xdg_toplevel_set_size so the wlr_toplevel has the
same dimensions as sway. Fixes#5266.
Regular clients are not allowed to use this interface. wlroots
already sends a protocol error if a non-Xwayland client tries to
use this interface, but let's remove all temptation by hiding it
completely.
With recent wlroots changes, backends which don't support output
modes can now support being disabled.
We were always marking mode-less outputs as disabled. Stop doing
that, check whether the output takes up some space in the layout
instead.
Sway has two knobs to control idling:
- seat idle_inhibit: when the seat is active (ie. not idle), this
extends the active state. When the seat is idle, this is
ignored.
- seat idle_wake: when the seat is idle, this wakes up the seat.
When the seat is active, this is ignored.
The motivation for the deprecation is two-fold:
- The concept of "seat idle state" is ill-defined. Each idle-notify-v1
client will pass a different idle timeout. With the old logic, a
seat was declared idle if and only if all idle-notify-v1 timeouts have
expired. However, if only a portion of the timeouts have expired,
then some clients would wake up, and the rest would stay active.
This is inconsistent with the definition of idle_inhibit/idle_wake:
idle_inhibit was used for clients which are waking up.
- It never worked properly with the new idle-notify-v1 protocol
and no-one noticed. Only the legacy KDE idle protocol is taken
into account, but that protocol is not used anymore.
On multi-seat configurations a zwp_pointer_gestures_v1 global was
created for every seat.
Instead, create the global once in the input manager, to be shared
across all seats.
In case a display is unplugged, the sway output may be removed from the
userdata before the gamma_control can be reset. In this case we can't
schedule a commit on the output, simply return within the function.
backtrace full:
#0 handle_gamma_control_set_gamma (listener=0x4856a8 <server+616>, data=0x7ffce1ed59c0) at ../sway/desktop/output.c:1105
server = 0x485440 <server>
event = 0x7ffce1ed59c0
output = 0x0
#1 0x00007f430d1dca0c in wl_signal_emit_mutable ()
from /nix/store/ky1g6ylzr2m4bq8fy0gzrnqmjr6948k5-wayland-1.22.0/lib/libwayland-server.so.0
No symbol table info available.
#2 0x00007f430d142370 in gamma_control_destroy (gamma_control=0x29eb9b0) at ../types/wlr_gamma_control_v1.c:37
manager = 0x27e33e0
output = 0x2a10770
event = {output = 0x2a10770, control = 0x0}
#3 0x00007f430d14239b in gamma_control_handle_output_destroy (listener=<optimized out>, data=<optimized out>)
at ../types/wlr_gamma_control_v1.c:59
gamma_control = <optimized out>
#4 0x00007f430d1dca0c in wl_signal_emit_mutable ()
from /nix/store/ky1g6ylzr2m4bq8fy0gzrnqmjr6948k5-wayland-1.22.0/lib/libwayland-server.so.0
No symbol table info available.
#5 0x00007f430d12a0e0 in wlr_output_destroy (output=output@entry=0x2a10770) at ../types/output/output.c:384
cursor = <optimized out>
tmp_cursor = <optimized out>
layer = <optimized out>
tmp_layer = <optimized out>
#6 0x00007f430d114ecf in disconnect_drm_connector (conn=conn@entry=0x2a10770) at ../backend/drm/drm.c:1757
__PRETTY_FUNCTION__ = "disconnect_drm_connector"
#7 0x00007f430d117078 in scan_drm_connectors (drm=drm@entry=0x1eebab0, event=event@entry=0x7ffce1ed5c1c) at ../backend/drm/drm.c:1597
c = <optimized out>
wlr_conn = 0x2a10770
drm_conn = 0x2e760d0
conn_id = <optimized out>
index = 4
i = 4
res = 0x2e761f0
seen_len = 5
seen = {true, true, true, true, true, false}
new_outputs_len = 0
new_outputs = 0x7ffce1ed5ab0
conn = <optimized out>
tmp_conn = <optimized out>
index = <optimized out>
#8 0x00007f430d113425 in handle_dev_change (listener=0x1eebbb0, data=0x7ffce1ed5c18) at ../backend/drm/backend.c:157
drm = 0x1eebab0
change = 0x7ffce1ed5c18
#9 0x00007f430d1dca0c in wl_signal_emit_mutable ()
from /nix/store/ky1g6ylzr2m4bq8fy0gzrnqmjr6948k5-wayland-1.22.0/lib/libwayland-server.so.0
No symbol table info available.
#10 0x00007f430d111696 in handle_udev_event (fd=<optimized out>, mask=<optimized out>, data=<optimized out>)
at ../backend/session/session.c:213
event = {type = WLR_DEVICE_HOTPLUG, {hotplug = {connector_id = 0, prop_id = 0}}}
devnum = <optimized out>
dev = 0x1ed9460
session = <optimized out>
udev_dev = 0x2e70db0
sysname = 0x2e73c60 "card0"
devnode = <optimized out>
action = 0x7f430d6677b5 "change"
seat = <optimized out>
__PRETTY_FUNCTION__ = "handle_udev_event"
#11 0x00007f430d1de8e2 in wl_event_loop_dispatch ()
from /nix/store/ky1g6ylzr2m4bq8fy0gzrnqmjr6948k5-wayland-1.22.0/lib/libwayland-server.so.0
No symbol table info available.
#12 0x00007f430d1dc445 in wl_display_run () from /nix/store/ky1g6ylzr2m4bq8fy0gzrnqmjr6948k5-wayland-1.22.0/lib/libwayland-server.so.0
No symbol table info available.
#13 0x000000000041daa5 in server_run (server=server@entry=0x485440 <server>) at ../sway/server.c:338
No locals.
#14 0x000000000041cf4d in main (argc=<optimized out>, argv=0x7ffce1ed5fe8) at ../sway/main.c:415
verbose = false
debug = false
validate = false
allow_unsupported_gpu = false
config_path = 0x0
c = <optimized out>
where event->output->data is NULL:
(gdb) p event->output->data
$5 = (void *) 0x0
This allows for layer shell surfaces to receive focus while the surface is explicitly focused, i.e allowing
text fields to receive keyboard input just like a regular surface.
Clear was done using sway_output's logical dimensions, instead of the
wlr_output physical dimensions. This meant that when output scaling was
applied, only a part of the screen would be cleared.
Use the wlr_output dimensions instead.
Regressed by: https://github.com/swaywm/sway/pull/7552
The new wlr_render_pass API provides src_box, dst_box and clip
parameters for texture rendition. Rather than clipping the dst_box,
which control the projection matrix and leads to compression, intersect
the damage and clip box and pass these as a clip parameter.
Fixes: https://github.com/swaywm/sway/issues/7579
Regressed by: https://github.com/swaywm/sway/pull/7552
This was introduced in the last libinput release.
Fixes the following error:
../sway/ipc-json.c:928:17: error: enumeration value 'LIBINPUT_CONFIG_ACCEL_PROFILE_CUSTOM' not handled in switch [-Werror=switch]
928 | switch (libinput_device_config_accel_get_profile(device)) {
| ^~~~~~
Fixes an issue where an already visible scratchpad window being moved due to
'scratchpad show' leaves the entire workspace at the top of the focus stack in
the old workspace. Moving by 'focus output' back to the old workspace would
focus the entire workspace instead of just the last active container.
This makes the behavior of floating containers more consistent with i3.
The coordinates of the container are scaled when the size of the
workspace it is on changes or when the container is moved
between workspaces on different outputs.
For scratchpad containers, add a new state that preserves the dimensions
of the last output the window appeared on. This is necessary because
after a container is hidden in the scratchpad, we expect it to be in the
same relative position on the output when it reappears. We can't just
use the container's attached workspace because that workspace's
dimensions might have been changed or the workspace as a whole could
have been destroyed.
CAIRO_HINT_STYLE_FULL attempts to maximize contrast at the expense
of fidelity, this makes most fonts that haven't been hand hinted,
which makes up the majority of fonts out there, appear much worse.
In the absence of explicitly set hint style, cairo will default to
CAIRO_HINT_STYLE_SLIGHT, which attempts to improve contrast while
retaining fidelity to the original shapes, which is what we want.
When a window in the scratchpad container requests for
xdg_activation_v1, it is ignored no matter what the value of
focus_on_window_activation is.
At least allow windows in the scratchpad to set the urgent flag. When
focus_on_window_activation is set to "focus", show the parent scratchpad
where the contained requested for xdg_activation_v1.
Check whether output->damage_ring.current is empty before calling
wlr_output_attach_render(). Saves us from having to un-do that
via wlr_output_rollback().
Atm we got issue with the touch position sent to the clients. While
holding contact, leaving the initial container will continue to send
motion event to the client but with the new local position from the new
container.
This seatop goal is to send the position of the touch event, relatively
to the initial container layout position.
This function was already declared in container.h but defined in
commands/swap.c for some unknown reason. Everything in commands/ assumes
the handler context has been set appropriately by the command preludes
but this function snuck its way into seatop_* which doesn't set anything
in the handler context.
The fact that the seatop drag actions manipulate the focus without
custody of the seat means they are definitely very broken in multiseat.
With `hide_edge_borders both` (or at least `vertical`),
`window_rect.y` will equal `border_thickness` for SOME windows,
but it will be 0 for windows adjacent to top screen edge.
Therefore setting it to `border_thickness` is not sufficient.
This commit changes it to the actual y offset of content
into the container.
xdg-activation is now too strict in only allowing tokens with a seat to
activate a surface. Clients may rely on this behavior for urgency hints.
The seat argument is still useful in case the client does provide a seat
so we can activate it on the desired seat.
Fixes: 842609da64 (view: make request_activate take a seat, 2022-11-30)
fixes#7394
Test cases:
* zwlr_output_configuration_head_v1_set_adaptive_sync 0->0, no change
* 0->1, enabled
* 1->0, disabled
* 1->1, no change
Similar tests with an incapable display resulted in `"Adaptive sync
failed, ignoring"` messages as expected.
Since [1], wlr_renderer_begin() can fail. Check its return value
and bail.
This fixes an assertion error (when begin() fails and then we try
to render something) after a GPU reset.
[1]: a541c9510a
Dudemanguy
Simon Ser
Kirill Primak
Leonardo Hernández Hernández
ookami
bretello
Artturin
nukoseer
Mark Bolhuis
Alexander Orzechowski
Cezary Drożak
Rouven Czerwinski
33KK
Shaked Flur
Erik Reider
hrdl
Kenny Levinsen
Alexander Orzechowski
Elyes Haouas
Ankit Pandey
Stanislav Ochotnický
novenary
llyyr
Robin Jarry
Stacy Harper
Ronan Pigott
Daniel Hill
Łukasz Adamczak
Baltazár Radics
Tobias Predel
Alexander Courtis
Tobias Bengfort