Usually it should be enough to simply not grant a client's
minimize request, however some applications (Steam, fullscreen
games in Wine) don't wait for the compositor and minimize anyway,
getting them stuck in an unrecoverable state.
Restoring them immediately lead to heavy flickering when unfocused
on my test application (Earth Defense Force 5 via Steam), so it's
preferable to grant their request without actually minimizing and
then restoring them once they are in focus again.
Previously, we called output_disable prior to wlr_output_commit. This
mutates Sway's output state before the output commit actually succeeds.
This results in Sway's state getting out-of-sync with wlroots'.
An alternative fix [1] was to revert the changes made by output_disable
in case of failure. This is a little complicated. Instead, this patch
makes it so Sway's internal state is never changed before a successful
wlr_output commit.
We had two output flags: enabled and configured. However enabled was set
prior to the output becoming enabled, and was used to prevent the output
event handlers (specifically, the mode handler) from calling
apply_output_config again (infinite loop).
Rename enabled to enabling and use it exclusively for this purpose.
Rename configure to enabled, because that's what it really means.
[1]: https://github.com/swaywm/sway/pull/5521
Closes: https://github.com/swaywm/sway/issues/5483
If moving e.g. `T[app app]` into a new workspace with `workspace_layout
tabbed`, then post-move the tree in that workspace will be `T[T[app
app]]`. This still happens with horizontal or vertical workspace layout,
but is less visible since those containers have no decorations.
Fixes#5426.
wlr_drag installs grabs for the full duration of the drag, leading to
the drag target not being focused when the drag ends. This leads to
unexpected focus behavior, especially for the keyboard which requires
toggling focus away and back to set.
We can only fix the focus once the grabs are released, so refocus the
seat when the wlr_drag destroy event is received.
Closes: https://github.com/swaywm/sway/issues/5116
Prior to this commit, a tablet device could trigger mouse button down
bindings if the pen was pressed on a surface that didn't bind tablet
handlers -- but it wouldn't if the surface did bind tablet handlers.
We should expose consistent behavior to users so that they don't have to
care about emulated vs. non-emulated input, so stop triggering bindings
for any non-pointer devices.
Previously, a tablet or touch device could report activity as a pointer
device if it went through pointer emulation. This commit refactors idle
sources to be consistently reported based on the type of the device that
generated an input event, and now how that input event is being
processed.
This adds support for wlr_keyboard_group's enter and leave events. The
enter event just updates the keyboard's state. The leave event updates
the keyboard's state and if the surface was notified of a press event
for any of the keycodes, it is refocused so that it can pick up the
current keyboard state without triggering any keybinds.
During the execution of a resize transaction, the buffer associated
with a view's surface is saved and reused until the client acknowledges
the resulting configure event.
However, only one the main buffer of the main surface was stored and
rendered, meaning that subsurfaces disappear during resize.
Iterate over all, store and render buffers from all surfaces in the view
to ensure that correct rendering is preserved.
This is a tiny cleanup commit that renames `simulated_tool_tip_down` to
`simulating_pointer_from_tool_tip`, making it match
`simulating_pointer_from_touch`.
This is a better name since it makes it clear that it's the *pointer*
that's being simulated, not the tool tip.
Currently, when tablet input exits a window during an implicit grab, it
passes focus to another window.
For instance, this is problematic when trying to drag a scrollbar, and
exiting the window — the scrollbar motion stops. Additionally,
without `focus_follows_mouse no`, the tablet passes focus to whatever
surface it goes over regardless of if there is an active implicit.
If the tablet is over a surface that does not bind tablet handlers, sway
will fall back to pointer emulation, and all of this works fine. It
probably should have consistent behavior between emulated and
not-emulated input, though.
This commit adds a condition for entering seatop_down when a tablet's
tool tip goes down, and exiting when it goes up. Since events won't be
routed through seatop_default, this prevents windows losing focus during
implicit grabs.
Closes#5302.
Add a separate per-view shortcuts_inhibitor command that can be used
with criteria to override the per-seat defaults. This allows to e.g.
disable shortcuts inhibiting globally but enable it for specific,
known-good virtualization and remote desktop software or, alternatively,
to blacklist that one slightly broken piece of software that just
doesn't seem to get it right but insists on trying.
Add a flag to sway_view and handling logic in the input manager that
respects that flag if configured but falls back to per-seat config
otherwise. Add the actual command but with just enable and disable
subcommands since there's no value in duplicating the per-seat
activate/deactivate/toggle logic here. Split the inhibitor retrieval
helper in two so we can use the backend half in the command to retrieve
inhibitors for a specific surface and not just the currently focused
one. Extend the manual page with documentation of the command and
references to its per-seat sibling and usefulness with criteria.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
This is a small cleanup commit for removing `sway_tablet` parameters
from functions that already accept `sway_tablet_tool`, since the tablet
reference can be accessed through `tool->tablet`.
This commit renames `motion` and `axis` handlers to `pointer_motion` and
`pointer_axis`, respectively, to disambiguate them from their tablet
(and future touch) handlers. `button` is left as-is, as it is generic
across input devices.
This commit moves tablet motion logic into a seatop handler.
As a side-effect of seatop implementations being able to receive
tablet motion events, fixes#5232.
This commit refactors `cursor_rebase` into `cursor_update_image`, and
moves sending pointer events to the two existing call sites. This will
enable this code to be reused for tablets.
Refs #5232
This commit refactors `cursor_handle_activity` to also take the idle
source, so that it can be reused for tablet and touch activity.
Previously, the timeouts would be tracked, but the cursor would never be
un-hidden for anything but pointers.
Fixes#5169.
Instead of hardcoded power of 2 values, use bitshifts. This makes the
enums more readable, avoids mistakes, and makes it clear how much of the
int32_t bit space we have left.
While at it, fix other minor style issues.
This allows e.g. triggering one command while a key is held, then
triggering another to undo the change performed by it afterwards. One
use case for this is triggering push-to-talk functionality for VoIP
tools without granting them full access to all input events.
Fixes#3151
Add a command to influence keyboard shortcuts inhibitors. In its current
form it can be used to activate, deactivate or toggle an existing
inhibitor on the surface currently receiving input. This can be used to
define an escape shortcut such as:
bindsym --inhibited $mod+Escape seat - shortcuts_inhibitor deactivate
It also allows the user to configure a per-seat default of whether
keyboard inhibitors are honoured by default (the default) or not. Using
the activate/toggle command they can then enable the lingering inhibitor
at a later time of their choosing.
As a side effect this allows to specifically address a named seat for
actions as well, whatever use-case that might serve.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Adding support for the keyboard shortcuts inhibit protocol allows remote
desktop and virtualisation software to receive all keyboard input in
order to pass it through to their clients so users can fully interact
the their remote/virtual session. The software usually provides its own
key combination to release its "grab" to all keyboard input. The
inhibitor can be deactivated by the user by removing focus from the
surface using another input device such as the pointer.
Use support for the procotol in wlroots to add support to sway. Extend
the input manager with handlers for inhibitor creation and destruction
and appropriate bookkeeping. Attach the inhibitors to the seats they
apply to to avoid having to search the list of all currently existing
inhibitors on every keystroke and passing the inhibitor manager around.
Add a helper function to retrieve the inhibitor applying to the
currently focused surface of a seat, if one exists.
Extend bindsym with a flag for bindings that should be processed even if
an inhibitor is active. Conversely this disables all normal shortcuts if
an inhibitor is found for the currently focused surface in
keyboard::handle_key_event() since they don't have that flag set. Use
above helper function to determine if an inhibitor exists for the
surface that would eventually receive input.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Fix a typo in the bit mask value of the BINDING_RELOAD flag introduced
in commit 152e30c37 so it can work as intended.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
This enables/disables adaptive synchronization on the output.
For now, the default is disabled because it might cause flickering on
some hardware if clients don't submit frames at regular enough
intervals. In the future an "auto" option will only enable adaptive sync
if a fullscreen client opts-in via a Wayland protocol.
This can be used as a workaround to flag terminal windows as urgent when
commands are completed, until urgency is introduced in the Wayland
protocol.
Configure your shell to run `swaymsg "[pid=$PPID] urgent enable"` when
commands are completed, and use a terminal which uses one process per
window.
The output manager config is created when the output is created. It is
updated when the mode, transform, scale, or layout for the output
changes, as well as, when the output is destroyed.
Since the output->enabled property was not being set before calling
apply_output_config, the output event handlers were early returning and
never updating the output manager config when the output state was
committed.
This fixes the issue by setting output->enabled in apply_output_config
below the output disabling section. There are also a few other minor
changes that are required to function.
Additionally, this renames output_enable to output_configure to better
describe the recent changes.
The only output_enable caller is now apply_output_config. Stop calling
apply_output_config from output_enable to simplify the code and avoid
the back-and-forth between these two functions.
output_enable is now the symmetric of output_disable: it just marks the
output as enabled and performs bookkeeping (e.g. creating teh default
workspace). It is called from apply_output_config after the output
commit, so that it can read the current output state and act
accordingly.
This change also allows us to avoid an extraneous wlr_output_commit.
References: https://github.com/swaywm/sway/issues/4921
Closes#4929
Replaces criteria_get_views with criteria_get_containers which can
return containers without views when the criteria only contains
container properties.
If a view is mapped to a workspace using an assign, the pid should still
be removed from the pid mapping list. This prevents child processes from
matching against it and mapping a view to a likely undesired workspace.
This adds a listener for the destroy event of the cursor image surface.
This prevents a use-after-free when the last visible image surface is
freed, there has not been a new cursor set, and the cursor is reshown.
Containers are always fixed to the pixel grid so position and size them
with integers instead of doubles.
Functionally this should be no different since rounding down is already
being done on things like layout. But it makes it clear what the
intention is and avoids bugs where fractional pixels are used. The
translating and moving code is still using doubles because the cursors
can have fractional pixels and thus the code is plumbed that way. But
that could also probably be changed easily by doing the integer
conversions earlier and plumbing with int.
Because the layout code rounds down the dimensions of the windows
resizing would often be off by one pixel. The width/height fraction
would not exactly reflect the final computed width and so the resize
code would end up calculating things wrong.
To fix this first snap the container size fractions to the pixel grid
and only then do the resize. Also use round() instead of floor() during
layout to avoid a slightly too small width. This applies in two cases:
1. For the container we are actually resizing using floor() might result
in being 1px too small.
2. For the other containers it might result in resizing them down by 1px
and then if the container being resized is the last all those extra
pixels would make the resize too large.
Fixes#4391
This is the third commit in a series of commits to refactor color
handling in sway. This removes add_color from commands.c. It was only
being used by bar_cmd_colors. This also changes the functions to use
parse_color which is used to validate rgb(a) colors throughout the code
base and is also what i3bar is using to parse the colors after they are
passed over ipc. After parsing the color and ensuring it is valid, the
rgba hex string is then generated using snprintf. This refactor also
ensures that all the colors for the command are valid before applying
any of them.
This removes `seat <seat> keyboard_grouping keymap` and replaces it with
`seat <seat> keyboard_grouping smart`. The smart keyboard grouping will
group based on both the keymap and repeat info. The reasoning for this
is that deciding what the repeat info should be for a group is either
arbitrary or non-deterministic when multiple keyboards in the group have
repeat info configured (unless somehow exposed to the user in a
reproducible uniquely identifiable fashion).
This adds seat configuration options which can be used to configure what
events affect the idle behavior of sway.
An example use-case is mobile devices: you would remove touch from the
list of idle_wake events. This allows the phone to stay on while you're
actively using it, but doesn't wake from idle on touch events while it's
sleeping in your pocket.
Some wayland clients (mostly GTK3 apps) like eog or evince support
gestures like pinch-to-zoom. These gestures are given to clients
via the pointer_gestures_v1 protocol. This is already supported in
wlroots, so we just need to hook up the events here in sway.
Fixes#4724
Repaint scheduling delays output render and frame done events from
output frame events, and block idle frame events from being scheduled in
between output frame done and output render in this period of time.
If a surface is committed after its frame done event, but before output
render, idle frame requests will be blocked, and the surface relies on
the upcoming render to schedule a frame.
If when the repaint timer expires, output render is deemed unnecessary,
no frame will be scheduled. This can lead to surfaces never having their
frame callbacks fire.
To fix this, we store that a surface has requested a frame in
surface_needs_frame. When the repaint expires, if no render is deemed
necessary, we check this flag and schedule an idle frame.
Fixes#4768
A wlr_keyboard_group allows for multiple keyboard devices to be
combined into one logical keyboard. This is useful for keyboards that
are split into multiple input devices despite appearing as one physical
keyboard in the user's mind.
This adds support for wlr_keyboard_groups to sway. There are two
keyboard groupings currently supported, which can be set on a per-seat
basis. The first keyboard grouping is none, which disables all grouping
and provides no functional change. The second is keymap, which groups
the keyboard devices in the seat by their keymap. With this grouping,
the effective layout and repeat info is also synced across keyboard
devices in the seat. Device specific bindings will still be executed as
normal, but everything else related to key and modifier events will be
handled by the keyboard group's keyboard.
Calling wlr_output_manager_v1_set_configuration with an enabled output
and a NULL mode is incorrect if the output doesn't support modes.
When DPMS'ing an output, wlr_output_enable(output, false) is called.
This de-allocates the CRTC and sets wlr_output.current_mode to NULL.
Because we mark DPMS'ed outputs as enabled, we also need to provide a
correct output mode. Add a field to sway_output to hold the current
mode.
Closes: https://github.com/swaywm/wlroots/issues/1867
Sway has basic support for drawing tablets, but does not expose
properties such as pressure sensitivity. This implements the wlr tablet
v2 protocol, providing tablet events to Wayland clients.
This just adds a force option to cmd_xwayland that allows for xwayland
to be immediately launched instead of lazily launched. This is useful
for slower machines so it can be part of the startup time instead of
when the user is actively trying to use it
This keeps track of whether surfaces received a key press event and
will only send a key release event if the pressed event was sent. This
also requires changing the keycodes that are sent via wl_keyboard_enter
to only include those that were previously sent. This makes it so
surfaces do not receive key release events for keys that they never
received a key press for and makes it so switching focus doesn't leak
keycodes that were consumed by bindings.
This adds support for specifying a binding for a specific group. Any
binding without a group listed will be available in all groups. The
priority for matching bindings is as follows: input device, group, and
locked state.
For full compatibility with i3, this also adds Mode_switch as an alias
for Group2. Since i3 only supports this for backwards compatibility
with older versions of i3, it is implemented here, but not documented.
The documentation for wayland-server.h says:
> Use of this header file is discouraged. Prefer including
> wayland-server-core.h instead, which does not include the server protocol
> header and as such only defines the library PI, excluding the deprecated API
> below.
Replacing wayland-server.h with wayland-server-core.h allows us to drop the
WL_HIDE_DEPRECATED declaration.
This commit si similar to wlroots' ca45f4490ccc ("Remove all wayland-server.h
includes").
This adds a libinput_config change type to the input event for when
the libinput config for a device changes
In order for this to be possible to track, the libinput config code
had to be refactored. It is now extracted into a separate file to
isolate it from the rest of the input management code.
This adds an ipc event related to input devices. Currently the
following changes are supported:
- added: when an input device becomes available
- removed: when an input device is no longer available
- xkb_keymap_changed: (keyboards only) the keymap changed
- xkb_layout_changed: (keyboards only) the effective layout changed
Adds a new commend "xkb_file", which constructs the internal
xkb_keymap from a xkb file rather than an RMLVO configuration.
This allows greater flexibility when specifying xkb configurations.
An xkb file can be dumped with the xkbcomp program.
Instead of tracking gaps per child apply gaps in two logical places:
1. In tiled containers use the layout code to add the gaps between
windows. This is much simpler and guarantees that the sizing of children
is correct.
2. In the workspace itself apply all the gaps around the edge. Here
we're in the correct position to size inner and outer gaps correctly and
decide on smart gaps in a single location.
Fixes#4296
Konstantin Pospelov
Ronan Pigott
Tobias Langendorf
Simon Ser
Geoffrey Casper
Tudor Brindus
Kenny Levinsen
Drew DeVault
Brian Ashworth
Jason Nader
Kalyan Sriram
Damien Tardy-Panis
Érico Rolim
Martin Michlmayr
Michael Weiser
David96
Andri Yngvason
xdavidwu
Linus Heckemann
Ryan Dwyer
Torstein Husebø
Anders
thermitegod
Pedro Côrte-Real
Josef Gajdusek
Benjamin Cheng
Ivan Molodetskikh
Tadeo Kondrak
lbonn
John Chadwick
Aleksis
Ben Brown
Ashkan Kiani
Ed Younis