With recent wlroots changes, backends which don't support output
modes can now support being disabled.
We were always marking mode-less outputs as disabled. Stop doing
that, check whether the output takes up some space in the layout
instead.
In case a display is unplugged, the sway output may be removed from the
userdata before the gamma_control can be reset. In this case we can't
schedule a commit on the output, simply return within the function.
backtrace full:
#0 handle_gamma_control_set_gamma (listener=0x4856a8 <server+616>, data=0x7ffce1ed59c0) at ../sway/desktop/output.c:1105
server = 0x485440 <server>
event = 0x7ffce1ed59c0
output = 0x0
#1 0x00007f430d1dca0c in wl_signal_emit_mutable ()
from /nix/store/ky1g6ylzr2m4bq8fy0gzrnqmjr6948k5-wayland-1.22.0/lib/libwayland-server.so.0
No symbol table info available.
#2 0x00007f430d142370 in gamma_control_destroy (gamma_control=0x29eb9b0) at ../types/wlr_gamma_control_v1.c:37
manager = 0x27e33e0
output = 0x2a10770
event = {output = 0x2a10770, control = 0x0}
#3 0x00007f430d14239b in gamma_control_handle_output_destroy (listener=<optimized out>, data=<optimized out>)
at ../types/wlr_gamma_control_v1.c:59
gamma_control = <optimized out>
#4 0x00007f430d1dca0c in wl_signal_emit_mutable ()
from /nix/store/ky1g6ylzr2m4bq8fy0gzrnqmjr6948k5-wayland-1.22.0/lib/libwayland-server.so.0
No symbol table info available.
#5 0x00007f430d12a0e0 in wlr_output_destroy (output=output@entry=0x2a10770) at ../types/output/output.c:384
cursor = <optimized out>
tmp_cursor = <optimized out>
layer = <optimized out>
tmp_layer = <optimized out>
#6 0x00007f430d114ecf in disconnect_drm_connector (conn=conn@entry=0x2a10770) at ../backend/drm/drm.c:1757
__PRETTY_FUNCTION__ = "disconnect_drm_connector"
#7 0x00007f430d117078 in scan_drm_connectors (drm=drm@entry=0x1eebab0, event=event@entry=0x7ffce1ed5c1c) at ../backend/drm/drm.c:1597
c = <optimized out>
wlr_conn = 0x2a10770
drm_conn = 0x2e760d0
conn_id = <optimized out>
index = 4
i = 4
res = 0x2e761f0
seen_len = 5
seen = {true, true, true, true, true, false}
new_outputs_len = 0
new_outputs = 0x7ffce1ed5ab0
conn = <optimized out>
tmp_conn = <optimized out>
index = <optimized out>
#8 0x00007f430d113425 in handle_dev_change (listener=0x1eebbb0, data=0x7ffce1ed5c18) at ../backend/drm/backend.c:157
drm = 0x1eebab0
change = 0x7ffce1ed5c18
#9 0x00007f430d1dca0c in wl_signal_emit_mutable ()
from /nix/store/ky1g6ylzr2m4bq8fy0gzrnqmjr6948k5-wayland-1.22.0/lib/libwayland-server.so.0
No symbol table info available.
#10 0x00007f430d111696 in handle_udev_event (fd=<optimized out>, mask=<optimized out>, data=<optimized out>)
at ../backend/session/session.c:213
event = {type = WLR_DEVICE_HOTPLUG, {hotplug = {connector_id = 0, prop_id = 0}}}
devnum = <optimized out>
dev = 0x1ed9460
session = <optimized out>
udev_dev = 0x2e70db0
sysname = 0x2e73c60 "card0"
devnode = <optimized out>
action = 0x7f430d6677b5 "change"
seat = <optimized out>
__PRETTY_FUNCTION__ = "handle_udev_event"
#11 0x00007f430d1de8e2 in wl_event_loop_dispatch ()
from /nix/store/ky1g6ylzr2m4bq8fy0gzrnqmjr6948k5-wayland-1.22.0/lib/libwayland-server.so.0
No symbol table info available.
#12 0x00007f430d1dc445 in wl_display_run () from /nix/store/ky1g6ylzr2m4bq8fy0gzrnqmjr6948k5-wayland-1.22.0/lib/libwayland-server.so.0
No symbol table info available.
#13 0x000000000041daa5 in server_run (server=server@entry=0x485440 <server>) at ../sway/server.c:338
No locals.
#14 0x000000000041cf4d in main (argc=<optimized out>, argv=0x7ffce1ed5fe8) at ../sway/main.c:415
verbose = false
debug = false
validate = false
allow_unsupported_gpu = false
config_path = 0x0
c = <optimized out>
where event->output->data is NULL:
(gdb) p event->output->data
$5 = (void *) 0x0
This allows for layer shell surfaces to receive focus while the surface is explicitly focused, i.e allowing
text fields to receive keyboard input just like a regular surface.
Clear was done using sway_output's logical dimensions, instead of the
wlr_output physical dimensions. This meant that when output scaling was
applied, only a part of the screen would be cleared.
Use the wlr_output dimensions instead.
Regressed by: https://github.com/swaywm/sway/pull/7552
The new wlr_render_pass API provides src_box, dst_box and clip
parameters for texture rendition. Rather than clipping the dst_box,
which control the projection matrix and leads to compression, intersect
the damage and clip box and pass these as a clip parameter.
Fixes: https://github.com/swaywm/sway/issues/7579
Regressed by: https://github.com/swaywm/sway/pull/7552
Check whether output->damage_ring.current is empty before calling
wlr_output_attach_render(). Saves us from having to un-do that
via wlr_output_rollback().
fixes#7394
Test cases:
* zwlr_output_configuration_head_v1_set_adaptive_sync 0->0, no change
* 0->1, enabled
* 1->0, disabled
* 1->1, no change
Similar tests with an incapable display resulted in `"Adaptive sync
failed, ignoring"` messages as expected.
Since [1], wlr_renderer_begin() can fail. Check its return value
and bail.
This fixes an assertion error (when begin() fails and then we try
to render something) after a GPU reset.
[1]: a541c9510a
Views now maintain a reference to a launch context which, as a last
resort, is populated at map time with a context associated with its pid.
This opens the possibility of populating it before map via another
source, e.g. xdga-tokens or configuration.
This removes the need to rename the pid_workspaces when a workspace
is renamed.
It also opens the possibility of tracking other node types. Tracking
containers would allow application to be placed correctly in the
container tree even if the user has moved their focus elsewhere since
it was launched.
Currently, when encountering a non-desktop display, sway offers the
output for leasing and returns without storing it in a sway specific
output type like `struct sway_output`. Additionally, running
`swaymsg -t get_outputs` doesn't show non-desktop outputs.
This commit stores the non-desktop outputs into a struct called
`sway_output_non_desktop`, and adds them to a list on `sway_root`
Our layer shell implementation assigns every layer surface to an output
on creation. It tracks this output using the output field on the
underlying wlr_layer_surface_v1 structure. As such, much of the existing
code assumes that output is always non-NULL and omits NULL checks
accordingly.
However, there are currently two cases where we destroy a
sway_layer_surface and output is NULL. The first is when we can't find
an output to assign the surface to and destroy it immediately after
creation. The second is when we destroy a surface in response to its
output getting destroyed, as we set output to NULL in
handle_output_destroy() before we call wlr_layer_surface_v1_destroy(),
which is what calls the appropriate unmap and destroy callbacks.
The former case doesn't cause any problems, since we haven't even
allocated a sway_layer_surface at that point or registered any
callbacks. The latter case, however, currently triggers a crash (#6120)
if a popup is visible, since our popup_handle_unmap() implementation
can't handle a NULL output.
To fix this issue, keep output set until right before we free the
sway_layer_surface. All we need to do is remove some of the cleanup
logic from handle_output_destroy(), since as of commit c9060bcc12
("layer-shell: replace close() with destroy()") that same logic is
guaranteed to be happen later when wlroots calls handle_destroy() as
part of wlr_layer_surface_v1_destroy().
This lets us remove some NULL checks from other unmap/destroy callbacks,
which is nice. We also don't need to check that the wlr_output points to
a valid sway_output anymore, since we unset that pointer after disabling
the output as of commit a0bbe67076 ("Address emersions comments on
output re-enabling") Just to be safe, I've added assertions that the
wlr_output is non-NULL wherever we use it.
Fixes#6120.
Currently, a floating window that's been fullscreened can send us
xdg_toplevel::move, and we'll enter seatop_move_floating, which lets us
drag the surface around while it's fullscreen. We don't want
this--fullscreen surfaces should always be aligned to the screen--so add
the same check that seatop_default already does when entering this mode.
Tested with Weston's weston-fullscreen demo, which sends a move request
if you click anywhere on its surface.
When REAPER submenu is closed `XCB_CLIENT_MESSAGE` with type
`NET_ACTIVE_WINDOW` is sent to set focus to parent menu.
Closes: https://github.com/swaywm/sway/issues/6324
Commit 37d7bc6998 ("transaction: Only wait for ack from visible
views") introduced a check which uses view_is_visible() to check if a view
is still visible on the screen. However view_is_visible() will early
return in case the node is in the destroying state. This is incorrect
for transactions, since a destroying view which is visible will trigger
configure events for other clients. This bug was visible when repeatedly
opening and closing two views side by side, since we ignore the
destroying node we get a frame where the still open view is shown with
the old configure values and the rest is the desktop background. The
next frame is than correct again.
Fix this by considering destroying views as visible, we correctly wait
for them and send the configure events to other views in time, fixing
the background flicker.
Fixes#6473
`popup_unconstrain` uses view coordinates to init the output box for
popups. However wlroots expects the box to be set in a toplevel surface
coordinate system, which is not always equal to view. The difference
between those is a window geometry set via xdg-shell.
GTK4 reserves some space for client-side decoration and thus has a
window with top left corner not matching to (0, 0) of a surface. The box
calculated without taking that into account was slightly shifted
compared to the actual output and allowed to position part of the popup
off screen.
We use the headless backend to create a special fallback output
used when no other output is connected. However this messes up the
"real" headless output names users have come to expect (e.g.
currently the first headless output will be named "HEADLESS-2"
instead of "HEADLESS-1").
Fix this by setting the output name with [1].
[1]: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/3395
If the destroyed xwayland view is in transaction, it won't
be destroyed immediately. wlr_xwayland_surface then becomes
dangling pointer.
Closes#6605Closes#5884
Commit 152a559e replaced the view pointer in the inhibitor struct with a
pointer to the wlr_inhibitor for application inhibitors. But this was not
changed in the sway_idle_inhibit_v1_application_inhibitor_for_view function.
This caused a bug in the sway tree view where the application inhibitor is
always "none".
This commit makes sure the extents are kept up-to-date, fixes not
damaging the surface if its layer shell-specific state didn't change,
and adds a check if the layer shell-specific state didn't change but the
surface got mapped/unmapped, which could affect keyboard focus.
Simon Ser
Artturin
Alexander Orzechowski
Rouven Czerwinski
Erik Reider
Kirill Primak
Kenny Levinsen
Alexander Orzechowski
Elyes Haouas
novenary
Ronan Pigott
Alexander Courtis
Carl Smedstad
Simon Zeni
Alex Maese
Daniel De Graaf
kraftwerk28
Thomas Hebb
Kirill Primak
Tuomas Yrjölä
Aleksei Bavshin
Ronan Pigott
David Rosca
Tassilo Horn
Bartel Sielski