This change tracks, for each wlr_seat_client, the most recent serial
numbers which were sent to the client. When the client makes a
selection request, wlroots now verifies that the serial number
associated with the selection request was actually provided to that
specific client. This ensures that the client that was most
recently interacted with always has priority for its copy selection
requests, and that no other clients can incorrectly use a larger serial
value and "steal" the role of having the copy selection.
Also, the code used to determine when a given selection is superseded
by a newer request uses < instead of <= to allow clients to make
multiple selection requests with the same serial number and have the
last one hold.
To limit memory use, a ring buffer is used to store runs of sequential
serial numbers, and all serial numbers earlier than the start of the
ring buffer are assumed to be valid. Faking very old serials is
unlikely to be disruptive.
Assuming all clients are correctly written, the only additional
constraint which this patch should impose is that serial numbers
are now bound to seats: clients may not receive a serial number
from an input event on one seat and then use that to request
copy-selection on another seat.
The backend doesn't need to handle transform changes, since everything is done
in software. In fact, all of the implementations were all identical and just
set the transform.
We could add support for hardware transforms, but:
- This would require a different field (something like hardware_transform)
- Not all combinations are possible because there often are hardware
limitations
- The Wayland protocol isn't ready for this (in particular xdg-output, see [1])
This belongs to a different patch series anyway.
[1]: https://patchwork.freedesktop.org/series/52324/
It can be surprising for callers to stash pending changes, commit, get a
failure, then set some other pending changes, commit again, and get another
failure because of the previously-pending changes.
Instead, make commit reset the pending state on failure.
In addition to `button_count`, we keep track of the current buttons
pressed just as in `wlr_keyboard`.
Add `set_add` and `set_remove` to assist with this. These functions can
only be used with values greater than 0 (such as the button/key masks
for keyboards and pointers).
Partially addresses:
- https://github.com/swaywm/wlroots/issues/1716
- https://github.com/swaywm/wlroots/issues/1593
If mmap fails, it will return MAP_FAILED not NULL. Since the error
handling was incorrectly checking for NULL, MAP_FAILED was being passed
to xkb_keymap_new_from_string, on mmap failure, causing a segfault.
This just fixes the error checking.
If an output is destroyed while an idle_done event is scheduled, it
results in the following Address Sanitizer Output:
==1469==ERROR: AddressSanitizer: heap-use-after-free on address 0x6170000bb668 at pc 0x7f49aaa0c348 bp 0x7ffed5da35b0 sp 0x7ffed5da35a0
WRITE of size 8 at 0x6170000bb668 thread T0
#0 0x7f49aaa0c347 in schedule_done_handle_idle_timer ../subprojects/wlroots/types/wlr_output.c:265
#1 0x7f49aa2f875b in wl_event_loop_dispatch_idle (/usr/lib/libwayland-server.so.0+0xa75b)
#2 0x7f49aa2f8815 in wl_event_loop_dispatch (/usr/lib/libwayland-server.so.0+0xa815)
#3 0x7f49aa2f739b in wl_display_run (/usr/lib/libwayland-server.so.0+0x939b)
#4 0x556622dadd51 in server_run ../sway/server.c:216
#5 0x556622dac25d in main ../sway/main.c:397
#6 0x7f49aa0d0ce2 in __libc_start_main (/usr/lib/libc.so.6+0x23ce2)
#7 0x556622d8d09d in _start (/usr/local/bin/sway+0x3909d)
0x6170000bb668 is located 488 bytes inside of 672-byte region [0x6170000bb480,0x6170000bb720)
freed by thread T0 here:
#0 0x7f49aabc8f89 in __interceptor_free /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:66
#1 0x7f49aa968fc2 in drm_connector_destroy ../subprojects/wlroots/backend/drm/drm.c:829
#2 0x7f49aaa0cc52 in wlr_output_destroy ../subprojects/wlroots/types/wlr_output.c:357
#3 0x7f49aa96d2e9 in scan_drm_connectors ../subprojects/wlroots/backend/drm/drm.c:1265
#4 0x7f49aa961a59 in drm_invalidated ../subprojects/wlroots/backend/drm/backend.c:135
#5 0x7f49aaa2e1e9 in wlr_signal_emit_safe ../subprojects/wlroots/util/signal.c:29
#6 0x7f49aa98319f in udev_event ../subprojects/wlroots/backend/session/session.c:52
#7 0x7f49aa2f87f1 in wl_event_loop_dispatch (/usr/lib/libwayland-server.so.0+0xa7f1)
previously allocated by thread T0 here:
#0 0x7f49aabc95a1 in __interceptor_calloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:95
#1 0x7f49aa96b7a2 in scan_drm_connectors ../subprojects/wlroots/backend/drm/drm.c:1114
#2 0x7f49aa961a59 in drm_invalidated ../subprojects/wlroots/backend/drm/backend.c:135
#3 0x7f49aaa2e1e9 in wlr_signal_emit_safe ../subprojects/wlroots/util/signal.c:29
#4 0x7f49aa98319f in udev_event ../subprojects/wlroots/backend/session/session.c:52
#5 0x7f49aa2f87f1 in wl_event_loop_dispatch (/usr/lib/libwayland-server.so.0+0xa7f1)
SUMMARY: AddressSanitizer: heap-use-after-free ../subprojects/wlroots/types/wlr_output.c:265 in schedule_done_handle_idle_timer
Shadow bytes around the buggy address:
0x0c2e8000f670: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c2e8000f680: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c2e8000f690: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c2e8000f6a0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c2e8000f6b0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
=>0x0c2e8000f6c0: fd fd fd fd fd fd fd fd fd fd fd fd fd[fd]fd fd
0x0c2e8000f6d0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c2e8000f6e0: fd fd fd fd fa fa fa fa fa fa fa fa fa fa fa fa
0x0c2e8000f6f0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c2e8000f700: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c2e8000f710: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
Remove the idle_done idle timer when the output is destroyed
This commit introduces wlr_output_schedule_done and refactors the mechanism
used to send wl_output events to clients.
wlr_output_schedule_done schedules a wl_output.done event. This allows clients
to see wlr_output property changes as atomic.
This function is also useful for add-on interfaces like xdg_output which need
to trigger a wl_output.done event to apply their new state.
wlr_output_damage_make_current has been renamed to
wlr_output_damage_attach_render, since it's just a wrapper for
wlr_output_attach_render.
wlr_output_damage_swap_buffers has been removed completely. Instead,
wlr_output_damage now listens to successful wlr_output commits and updates its
internal state accordingly.
This updates the backend part of the output API. This is mostly renaming:
make_current becomes attach_render and swap_buffers becomes commit.
This also fixes the RDP backend to support NULL damage.
This is necessary for direct scan-out and other upcoming features. This patch
changes the output API to look like the wl_surface API.
Outputs now have some double-buffered state: the frame to be submitted
(currently only wlr_renderer frames are supported) and the damaged region.
To attach a pending frame, use wlr_output_attach_render. To set the pending
damaged region, use wlr_output_set_damage.
To submit the pending state, call wlr_output_commit. This will submit the
pending frame to the backend.
To migrate from the old API to the new one:
- Replace wlr_output_make_current calls by wlr_output_attach_render
- Replace wlr_output_swap_buffers calls by wlr_output_set_damage and
wlr_output_commit
It doesn't make sense for clients to send "accept" requests to offers that
aren't drag-and-drop. I discussed with Daniel Stone to make it a protocol
error [1] but too many clients send it (e.g. GTK+). Let's just log it for now.
[1]: https://gitlab.freedesktop.org/wayland/wayland/merge_requests/11#note_149710
* idle: enable the compositors to add custom idle timeouts
* idle: add a private constructor which also creates the resource
* idle: move resource creation to the idle implementation callback
When the proximity_in event is sent for tablet_v2 and there's already a
surface that currently has tablet (tool) focus, it should be told that
this is no longer the case, so we need to send the proximity_out event.
* Add compile args for libinput to lib_wlr_types
Fixes the build on openSUSE Tumbleweed
* Remove libinput include from wlr_tablet_v2.c
+ libinput isn't used in the file
+ Also remove libinput dependency from types/meson.build
Since the fullscreen request may be made before the toplevel's surface
is mapped, the requested fullscreen output needs to be stored so it
can be retrieved on map (along with the existing fullscreen property).
This commit makes the required changes for wlr_xdg_toplevel_v6.
Since the fullscreen request may be made before the toplevel's surface
is mapped, the requested fullscreen output needs to be stored so it
can be retrieved on map (along with the existing fullscreen property).
This commit makes the required changes for wlr_xdg_toplevel.
If there were no outputs in the output layout,
wlr_output_layout_get_box would return the box:
{
.x = INT_MIN,
.y = INT_MIN,
.width = INT_MIN - INT_MAX,
.height = INT_MIN - INT_MAX
}
which results in an integer underflow for both the width and height.
This changes the logic to have the box be all zeroes, since an empty
output layout does not have a width or height and the location of
something without a size is irrelevant so this just uses the origin.
The grab serial can be used to start a pointer grab. A button pressed event
should be used for this purpose.
Thus, we should only save the grab serial if it's the first button pressed
event we send. This commit makes it so the serial is not saved if a button is
released while another button is still pressed.
In case a tool was removed, but not yet destroyed by the client, the
tool_client's tool can be NULL. We have to check that as well in the
set_cursor handler to prevent using inert resources
This commit makes sure surface->mapped is true when the unmapped event is
emitted. This is necessary because listeners can only damage surfaces that are
mapped. This is similar to the fact that the destroy event is emitted before
any destruction is actually made.
Fixes https://github.com/swaywm/sway/issues/3568
There is no point in modesetting an output to a mode that it is already
set to. Modesetting will cause the output to briefly flicker which is
undesirable for a noop. This prevents modesetting any wlr_output,
regardless of the backend, to it's currently set mode.
data-control: separate out a data_offer struct
This is a prerequisite to adding primary selection support.
data-control: separate out data_control_source
This is a prerequisite to adding primary selection support, since that
doesn't use wlr_data_source, but rather wlr_primary_selection_source.
Update the data-control protocol
data-control: add primary selection support
Merge create_offer and create_primary_offer
Extract code into data_control_source_destroy()
Fix pointer style
Move resource neutralization to destructor
Store wl_resource in the data_offer
Extract data_offer destruction into a function
It doesn't make sense to keep popups opened when unmapped. We also need to do
so in wlr_xdg_popup_destroy so that popups are destroyed in the correct order.
This supersedes f24e17259e and
04c9ca4198. These commits were manually removing
wlr_data_source destroy handlers when starting a new drag. This is error-prone.
Instead, this commit destroys the previous source whenever we start a new drag.
Frame events group logically connected pointer events. It makes sense to make
the backend responsible for sending frame events, since once the events are
split (ie. once the frame events are stripped) it's not easy to figure out
which events belongs to which frame again.
This is also how Weston handles frame events.
Fixes https://github.com/swaywm/wlroots/issues/1468
This makes compositors able to block and/or customize set_selection requests
coming from clients. For instance, it's possible for a compositor to disable
rich selection content (by removing all MIME types except text/plain). This
commit implements the design proposed in [1].
Two new events are added to wlr_seat: request_set_selection and
request_set_primary_selection. Compositors need to listen to these events and
either destroy the source or effectively set the selection.
Fixes https://github.com/swaywm/wlroots/issues/1138
[1]: https://github.com/swaywm/wlroots/issues/1367#issuecomment-442403454
Fixes a crash in SDL2 applications when using locked pointer.
SDL2 expects a wl_pointer v1 interface and doesn't provide a handler for
the wl_pointer::frame event. This results in a "listener function for
opcode 5 of wl_pointer is NULL" abort in wayland-client.
Tested on Xonotic v0.8.2 with libSDL2 v2.0.9. Xonotic needs to be ran
with "SDL_VIDEODRIVER=wayland xonotic-sdl" for SDL2 to use the wayland
backend.
When there aren't enough CRTCs for all outputs, we try to move a CRTC from a
disabled output to an enabled one. When this happens, the old output's state
wasn't changed, so the compositor thought it was still enabled and rendering.
This commit marks the old output as WLR_DRM_CONN_NEEDS_MODESET and sets its
current mode to NULL.
Occurs on subsequent calls to
relative_pointer_manager_v1_handle_get_relative_pointer()
Steps to reproduce:
- run rootston
- run examples/relative-pointer
- switch to relative pointer more than once
Note: if done fast enough it may take more than two switches to crash.
In particular, modified public creator and destructor function names,
added a display destroy listener, safely extract user data from
resources, send correct time (in usecs) in rootston, etc.
This is a common interface that can be used for all primary selection
protocols, as discussed in [1]. A new function wlr_seat_set_primary_selection
is added to set the primary selection for all protocols.
The seat now owns again the source, and resets the selection to NULL when
destroyed.
[1]: https://github.com/swaywm/wlroots/issues/1367#issuecomment-442403454
This commits completely refactors wlr_gtk_primary_selection. The goal is to
remove gtk-primary-selection state from the seat and better handle inert
resources where it makes sense.
wlr_seat_client.primary_selection_devices has been removed and replaced by
wlr_gtk_primary_selection_device. This allows us to make offers inert when the
current selection is replaced.
wlr_seat_set_primary_selection has been removed because it relied on wlr_seat
instead of wlr_gtk_primary_selection_device_manager. A new function,
wlr_gtk_primary_selection_device_manager_set_selection (candidate for the
longest function name in wlroots) has been added. It doesn't take a serial
anymore as serial checking only makes sense for set_selection requests coming
from Wayland clients (serial checking is now done in the Wayland interface
implementation).
Since wlr_gtk_primary_selection_device_manager is now required to set the
selection, a new function wlr_xwayland_set_gtk_primary_selection_device_manager
(candidate number two for longest function name) has been added.
Devices are now made inert when the seat goes away.
Future work includes removing the last primary selection bits from the seat,
mainly wlr_seat.primary_selection_source and wlr_seat.events.primary_selection,
replacing those with new fields in wlr_gtk_primary_selection_device. Or maybe
we could keep those in the seat and replace them with a re-usable interface
(for future zwp_primary_selection_v1 support). We need to think how we'll sync
these three protocols (GTK, X11 and wayland-protocols).
See https://github.com/swaywm/wlroots/issues/1388
wlr_subsurface_from_wlr_surface can return NULL if the wl_surface is still
alive and if the wl_subsurface has been destroyed. Make sure we check for NULL.
Fixes https://github.com/swaywm/sway/issues/3195
This commit makes it possible for a single client to have multiple data devices
for the same seat. This fixes issues with Firefox.
This mainly removes wlr_data_source.offer. We make sure we create one data
offer per device. We now make the offer inert when the source is destroyed.
Fixes the second half of https://github.com/swaywm/wlroots/issues/1041
The read format is dependent on the output, so we first need to make it
current. This fixes a race condition in wlr-screencopy-v1 where a dmabuf
client would cause EGL_NO_SURFACE to be bound at the time when
screencopy needs to query for the preferred format, causing GL errors.
When a client was creating multiple data devices for the same seat, we were
only creating one resource. This is a protocol error.
Instead, create one offer per data device.
This commit also makes offers inert when their source is destroyed.
Fixes part of https://github.com/swaywm/wlroots/issues/1041
Supersedes https://github.com/swaywm/wlroots/pull/1113
ie. don't destroy surface->toplevel on xdg_toplevel destroy. Instead do this on
xdg_surface destroy.
This allows compositors to add toplevel listeners when the surface appears and
remove them when the surface is destroyed.
We were assuming GL_BGRA_EXT was always supported.
We now check that it's supported for rendering. We fail if it isn't because
this format is specified as "always supported" by the Wayland protocol.
We also check if it's supported for reading pixels. A new preferred_read_format
function returns the preferred format that can be used to read pixels. This is
used by the screencopy protocol.
There was a missing copy_drm_surface_mgpu call in drm_connector_schedule_frame
so we asked for a pageflip with an unknown BO, resulting in ENOENT.
Additionally, this commit makes schedule_frame return a bool indicating
failures. This allows schedule_frame_handle_idle_timer to only set
frame_pending to true if a frame has been successfully scheduled. Thus, if a
pageflip fails, rendering won't be blocked forever anymore.
In case a pageflip is already pending, true is returned because a frame has
already been scheduled and will be sent sometime soon.
shm_open is a POSIX function creating an in-memory file. Using it simplifies
the code and removes the dependency on XDG_RUNTIME_DIR. The only downside is
that we need to generate a random name for the shm file.
Prior to this commit, setting up a zero timeout resulted in a timer that never
expires, which isn't particularly useful.
This commit allows setting up timers that expire immediately, which is useful
to immediately enter idle state.
wlr_cursor: make sure the output doesn't have a cursor before
creating a new one
wlr_output_layout: don't emit the "add" event when the output is
already in the layout
The prevoius implementation would always raise an error in the following sequence:
-> enter
-> leave
<- enable
The text-input type is not equipped to manage the validity of clents' requests, which should be handled in the compositor, as rootston does.
Manuel Stoeckl
Ilia Bozhinov
Dorota Czaplejewicz
Simon Ser
Ashkan Kiani
Brian Ashworth
Rouven Czerwinski
Drew DeVault
Scott Anderson
Guido Günther
Markus Ongyerth
Stuart Dilts
Ryan Walklin
Ian Fan
Ivan Molodetskikh
Sebastian Krzyszkowiak
Geoff Greer
Connor E
John Chen
Greg V
Ilya Trukhanov
Alex Maese
Timidger
random human
Julio Galvan