We were relying on the fact that we wouldn't paint anything on top
of the black background in the region of a black rect. However
when fractional scaling is used the repaint region might get
expanded to nearby pixels by scale_output_damage(). As a result
the neighbour scene nodes might leak into the skipped black rect's
region.
Avoid this by using this optimization for bottom-most black rects
only when fractional scaling is used.
References: https://github.com/swaywm/sway/issues/8233
If we need to apply a color transform to rendered content, we will not
be able to use direct scanout. Explicitly skip it to not accidentally
show frames lacking the color transform.
The DRM backend's set_cursor function always return true if the
buffer is NULL. If using a NULL cursor's buffer on startup, the
wlr_output_cursor will be marked as a hardware cursor. If the
cursor later gains a non-NULL buffer and the DRM backend rejects
that buffer, the cursor will remain marked as a hardware cursor,
despite the backend not displaying it as such. As a result, the
cursor will not be displayed at all. Fix this by always resetting
the hardware_cursor field in output_cursor_attempt_hardware().
Instead of having separate getters for shm formats and DMA-BUF
formats, use the same pattern as wlr_output_impl.get_primary_formats
with a single function which takes buffer caps as input.
Clients may, for example, commit an exclusive zone larger than the
output dimensions. Compositors must handle this gracefully, which likely
requires more work on the compositor side but returning a usable area
with negative width or height in wlr_scene_layer_surface_v1_configure()
is nonsensical.
When a wlr_gamma_control client calls set_gamma, we allocate a LUT based
on the value returned from wlr_output_get_gamma_size at the time of the
call.
If the output is off and has no CRTC, such as if gamma changes in the
background while a display is disabled for idle reasons,
wlr_output_get_gamma_size returns 0. This leads to a zero-sized table,
which the drm backend interprets as a request to reset gamma tables to
their default.
Store the gamma size when the gamma control was created. Even if the
size changes, this is the size the client was sent and uses to create
the LUTs it sends.
The surface argument is only used to obtain a wlr_seat_client and
semantically makes no sense. The wl_touch.cancel event applies to all
touch points and all surfaces of a client.
I decided to make the functions accept a wlr_seat_client rather than a
wl_client as it is directly available in the wlr_touch_point struct and
simplifies the implementation.
Previously, cases when a viewport source box was updated without attaching
a buffer weren't checked for correctness properly because the state's buffer
would be NULL. Use wlr_surface_state_has_buffer() instead.
This is worth doing despite wl_client_get_destroy_listener() incorrectly
accepting a mutable wl_client pointer since this lookup_client()
function will primarily be used with a wl_display_global_filter_func_t
which only provides a const wl_client pointer.
Work around this libwayland API wart in wlroots so compositors don't
have to.
I wish to use a allowlist of globals for my security context
implementation rather than a blocklist, which means I need access to
the wp_single_pixel_buffer_manager_v1 global in order to allowlist it.
I think using a allowlist will make it harder for me to accidentally
expose globals to a security context that were meant to be restricted.
I wish to use a allowlist of globals for my security context
implementation rather than a blocklist, which means I need access to
the ext_idle_notifier_v1 global in order to allowlist it.
I think using a allowlist will make it harder for me to accidentally
expose globals to a security context that were meant to be restricted.
I wish to use a allowlist of globals for my security context
implementation rather than a blocklist, which means I need access to
the wl_shm global in order to allowlist it.
I think using a allowlist will make it harder for me to accidentally
expose globals to a security context that were meant to be restricted.
This new helper assists compositors in allocating buffers for
modesets. It degrades to different allocation parameters as
needed, and should help with screens not turning on when multiple
outputs are connected on some hardware (e.g. Intel).
For simplicity, the old logic to try allocating with explicit
modifiers first and then fallback to implicit modifiers later is
left as-is. We'll probably want to have more complicated logic
instead in the future: try the fallback on one output at a time,
and try dropping modifiers one by one instead of using implicit
modifiers (at the cost of some combinatorial explosion).
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/1873
Co-authored-by: Kenny Levinsen <kl@kl.wtf>
This allows us to remove the renderer destroy listener. The
listener was buggy: compositors can't destroy surface resources on
their own.
The wlr_compositor will always outlive the wlr_surface, so no need
for a destroy listener.
If we hit this case, we effectively failed to render something, this might
be because a texture failed to upload or the texture is momentarily
unavailable after a GPU reset. If we fail to render, we have to continue
to track damage for the next frame in hopes that the texture becomes
available then.
An alternative approach would be to fail the commit completely if we
find this case, but in the case of gpu resets, clients may not commit
a new buffer for a while, and a frozen display does not help.
This fixes damage tracking issues after a gpu reset.
We will soon support custom swapchains. In order to track output damage
we should instead use the damage_ring which will hold all the buffers
we are currently tracking anyway across an arbitrary amount of swapchains.
We would fail to call scene_node_update() which would then call output
events for us. We need to make sure to update the node when we first map
a buffer, as the comment explained.
Stop trying to maintain a per-file _POSIX_C_SOURCE. Instead,
require POSIX.1-2008 globally. A lot of core source files depend
on that already.
Some care must be taken on a few select files where we need a bit
more than POSIX. Some files need XSI extensions (_XOPEN_SOURCE) and
some files need BSD extensions (_DEFAULT_SOURCE). In both cases,
these feature test macros imply _POSIX_C_SOURCE. Make sure to not
define both these macros and _POSIX_C_SOURCE explicitly to avoid
POSIX requirement conflicts (e.g. _POSIX_C_SOURCE says POSIX.1-2001
but _XOPEN_SOURCE says POSIX.1-2008).
Additionally, there is one special case in render/vulkan/vulkan.c.
That file needs major()/minor(), and these are system-specific.
On FreeBSD, _POSIX_C_SOURCE hides system-specific symbols so we need
to make sure it's not defined for this file. On Linux, we can
explicitly include <sys/sysmacros.h> and ensure that apart from
symbols defined there the file only uses POSIX toys.
- Add POSIX 1993.09 compliance macro in source files that use
"struct timespec";
- Add POSIX 2001.12 compliance macro in source files that use
"struct sigaction" and the SA_SIGINFO macro, or the fchmod()
function;
- Add POSIX 2008.09 compliance macro in source files that use the
getline() function.
These compliance macros are enough for wlroots to compile with the
git-master version of uClibc-ng.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
This implements the new ext-foreign-toplevel-list-v1 protocol [1].
Implemented analog to the zwlr-foreign-toplevel-management-v1 implementation.
The additional _ext_ in the names was added to avoid name collisions.
[1]: https://gitlab.freedesktop.org/wayland/wayland-protocols/-/merge_requests/187
Co-authored-by: Leon Henrik Plickat <leonhenrik.plickat@stud.uni-goettingen.de>
Compositors now are expected to wait for an initial commit by checking
wlr_xdg_surface.initial_commit on every surface commit and send
(schedule) configure events manually.
Some opaque pixel formats (nv12, p010) require per-plane bytes_per_block
info. However, it doesn't make sense to store them in
wlr_pixel_format_info, as they will never be useful (currently, this
info is used for shm, which doesn't have a concept of multi-planar
buffers.)
Let's define a separate array and function for determining whether a
pixel format has alpha.
Simon Ser
Alexander Orzechowski
Kirill Primak
Kenny Levinsen
JiDe Zhang
groveer
Manuel Stoeckl
Consolatis
Ilia Bozhinov
Isaac Freund
Vaxry
Paul Cercueil
columbarius
Austin Shafer
Leo Li
Andri Yngvason