207678e809
Add support for running swaybar_command
9 years ago
7647762bab
Fix default workspace name generation
...
This fixes the issue where workspace 10 ends up being the default.
9 years ago
2ab4e5676e
Merge pull request #360 from sce/fix_arrange_windows
...
Fix arrange windows
9 years ago
b9f14cee41
Merge pull request #359 from mikkeloscar/i3bar-command
...
Add bar option: swaybar_command <command>
9 years ago
9d7f1afdfb
Add bar option: swaybar_command <command>
9 years ago
f0b3ee6d84
layout: arrange_windows: Partially fix swaybar irregularties.
9 years ago
0ad5059b6f
layout: arrange_windows: Fix/better debug output.
9 years ago
90ff36cab8
Terminate children when freeing output container
9 years ago
ede27eabc5
Reload swaybar/swaybg on config reload.
...
This works by tracking the pids of the child processes in the related
output container and terminating the processes and spawning new ones on
a config reload.
Should solve: #347
9 years ago
7558a274fa
Add shims for swaylock on compositor
9 years ago
ed730db11b
layout: Keep output at the correct size, workspace can be smaller.
...
If the output is not at the correct size then that info must be queried
from wlc. The output size is used by e.g. seamless mouse to detect
output edges.
With this patch the output size is now correct and the workspace size is
adjusted according to any panels.
Without this patch seamless mouse would fail to detect outputs
above/below each other if there was a panel in between because the
output would offically end where the panel started, not at the actual
screen edge.
9 years ago
18a7afa1b3
focus: Fix moving last workspace.
...
If there's only one workspace on an output and it's moved to a different
output then active workspace will be NULL.
9 years ago
76c520a04b
sway: insert numbered workspaces in order
...
fixes #308
Ordered by number ascending, with insert before same numbers.
Workspaces without numbers are appended at the end of the list.
Example order:
1 2:named 3:the_second 3:the_first 9 FIRST_NAME SECOND_NAME ...
9 years ago
8f1ac1ef2c
sway: enable workspace selection by number
9 years ago
03787871d0
Fix bar invocation for multihead setup
9 years ago
1a365f19c9
Use system swaybar instead of local swaybar
9 years ago
60c204a09b
Invoke swaybar when an output matches a bar config
9 years ago
f6da4dda4b
Bring unmanaged windows to front on output arrange
...
Fixes #312
9 years ago
01798a5ae2
Merge pull request #338 from mikkeloscar/bar-separator-symbol
...
Implement bar option: separator_symbol
9 years ago
053fb09d1e
Use free_flat_list for simple char* list.
...
No need to reimplement free_flat_list functionality.
9 years ago
2fd7dd64ec
Implement bar option: separator_symbol
9 years ago
473ac4531f
[swaybar] Get bar config via IPC
9 years ago
efff8e5ba5
Merge pull request #335 from mikkeloscar/bar-font
...
Implement bar option: font <font>
9 years ago
9316851715
Implement bar option: font <font>
9 years ago
ded8919c69
Implement bar option: binding_mode_indicator <yes|no>
9 years ago
47f4aea9e7
Correctly free bindings list
9 years ago
f59f5d27aa
Implement bar option: output <output>
9 years ago
05e7334106
Fix active_workspace_border color definition
9 years ago
809c251df8
Merge pull request #328 from mikkeloscar/bar-height
...
Add bar height option (Airblader/i3)
9 years ago
6834a33290
Add bar height option (Airblader/i3)
9 years ago
432e3310f6
Fix crash from ipc_json_describe_workspace
...
destroying workspace '10'
Error: Signal 11. Printing backtrace
Backtrace: sway(error_handler+0x2f) [0x41478f]
Backtrace: /usr/lib/libc.so.6(+0x33680) [0x7f06d9a99680]
Backtrace: /usr/lib/libc.so.6(strlen+0x2a) [0x7f06d9ae70ca]
Backtrace: /usr/lib/libc.so.6(__strdup+0xe) [0x7f06d9ae6dfe]
Backtrace: /usr/lib/libjson-c.so.2(json_object_new_string+0x39) [0x7f06da01ffe9]
Backtrace: sway(ipc_json_describe_workspace+0xd8) [0x410408]
Backtrace: sway(ipc_event_workspace+0x38) [0x410618]
Backtrace: sway(set_focused_container+0x190) [0x40daf0]
Backtrace: sway(workspace_switch+0x1a1) [0x4142b1]
Backtrace: sway() [0x4096c6]
Backtrace: sway(handle_command+0x178) [0x405eb8]
Backtrace: sway() [0x40e6ee]
Backtrace: /usr/lib/libwlc.so.0(+0x19a1b) [0x7f06da6f0a1b]
Backtrace: /usr/lib/libwlc.so.0(+0x11b0c) [0x7f06da6e8b0c]
Backtrace: /usr/lib/libwayland-server.so.0(wl_event_loop_dispatch+0x72) [0x7f06d9e13242]
Backtrace: /usr/lib/libwayland-server.so.0(wl_display_run+0x25) [0x7f06d9e119a5]
Backtrace: /usr/lib/libwlc.so.0(wlc_run+0xfc) [0x7f06da6fda1c]
Backtrace: sway(main+0x25f) [0x4125cf]
Backtrace: /usr/lib/libc.so.6(__libc_start_main+0xf0) [0x7f06d9a86610]
Backtrace: sway(_start+0x29) [0x405bf9]
9 years ago
b76acbaf4f
Implement IPC_GET_BAR_CONFIG
9 years ago
de1f625c27
Add rgba support for bar colors
9 years ago
8c1d56812b
Implement bar option: colors {}
9 years ago
71a25d5da7
Remove a couple of unwanted spaces
9 years ago
242da783f4
Merge pull request #324 from mikkeloscar/free-bar-bindings
...
Free bar->bindings
9 years ago
7b0ea051c6
Merge pull request #325 from gpyh/bar_cmd_modifier
...
Added bar_cmd_modifier
9 years ago
0ead9324dc
Added bar_cmd_modifier
9 years ago
95de999922
Free bar->bindings
9 years ago
9db15e29b1
Merge pull request #323 from gpyh/bar_cmd_status_command
...
Added bar_cmd_status_command
9 years ago
5786fa7e35
Added bar_cmd_status_command
9 years ago
0513322c03
Move default bar config to bar creation.
...
Get rid of `config->bar` and define the default bar config options when
a bar is initialized.
9 years ago
87126a9fc2
Added bar_cmd_bindsym
...
Defined a sway_mouse_binding for clicks on the swaybar
9 years ago
42a85431ee
Merge pull request #320 from mikkeloscar/configure-mouse-btn2
...
Lookup dragging key when in dragging mode
9 years ago
82af08d8e9
Lookup dragging key when in dragging mode
...
Fixes bug introduced in 22916e9
9 years ago
0aeee6963d
Make mouse key used for drag/resize configurable
...
This makes it possible to define what mouse button key (left|right) to
use for dragging/resizing.
9 years ago
0d1eb5553c
Implement bar option: mode <dock|hide|invisible>
9 years ago
d6cd37d873
Implement bar option: hidden_state <hide|show>
9 years ago
401333e7c7
Implement bar option: id <custom-id>
...
If the id is defined by another bar it will just use the default id for
the bar. Typically `bar-x`.
If the id command is used multiple times within a bar block, the last
one will 'win'.
9 years ago
2be742d02d
Merge pull request #314 from mikkeloscar/bar-id
...
Add initial support for custom bar-id
9 years ago
2cedf88273
Add bar id to debug logs
9 years ago
c6b13163c9
Add initial support for custom bar-id
9 years ago
cf56c41c10
Move sway/util.c to common/util.c
9 years ago
774ffbe0d5
Detect proprietary AMD drivers too
9 years ago
b65e348233
Fix crash in bar { } blocks
9 years ago
45b959f601
Move numlen(1) to sway/util.c
9 years ago
211bc71599
Use tabs instead of spaces
9 years ago
0b2cf8b65c
Merge pull request #313 from mikkeloscar/bar-confing-subcommands
...
Bar confing subcommands
9 years ago
b00c106460
Add more debug logging to bar option parsing
9 years ago
bd0c58e85a
Implement bar option: position <top|bottom|left|right>
9 years ago
cc08daded4
Implement bar option: strip_workspace_numbers <yes|no>
9 years ago
4d17aa9919
Revert "Make mouse key used for drag/resize configurable"
...
This reverts commit 22916e9ebc
9 years ago
cb9b157e03
Add tray_output not supported warning
9 years ago
3ef6173c15
Merge pull request #311 from mikkeloscar/bar-config-parser
...
Implement bar { } config parsing
9 years ago
0a8ec26383
Implement bar option: tray_padding <px> [px]
9 years ago
b9e8accc51
Implement bar option: workspace_buttons <yes|no>
9 years ago
74152043f4
Implement 'bar { }' block parsing
9 years ago
64a183b23d
Fix dangling pointer on focus swap/describe WS
9 years ago
0b6949df08
Merge pull request #305 from mikkeloscar/fix-window-start
...
Don't reset x,y position before use.
9 years ago
7868e44d3f
Notify IPC on workspace changes more frequently
9 years ago
3891a7c73f
Don't reset x,y position before use.
...
The x and y position is calculated based on the position of the bar, we
don't want to reset these values when we need them.
9 years ago
d77d03ce84
Make destroy_workspace behave as expected
9 years ago
2f89b7084d
Correctly handle moving between fullscreen views
...
If focus would move in an output with a fullscreen view, it always
leaves the output. If focus would enter an output with a fullscreen
view, it always focuses the fullscreened view.
9 years ago
d361ce656d
Track the fullscreen view on a workspace swayc_t
9 years ago
6655534feb
Fullscreen on top of bar
9 years ago
af80b12add
Implement invoking `sway` as IPC client
...
As an alternative to invoking swaymsg.
9 years ago
19fd979af4
Merge pull request #300 from mikkeloscar/configure-mouse-btn
...
[RFC] Make mouse key used for drag/resize configurable
9 years ago
bffbe11e53
Fix config.c strlen error
9 years ago
f28a1d9183
Add floating_modifier extension to manpage
9 years ago
22916e9ebc
Make mouse key used for drag/resize configurable
...
This makes it possible to define what mouse button key (left|right) to
use for dragging/resizing.
9 years ago
762a78be3c
Merge pull request #292 from christophgysin/man
...
move manpages to subfolders
9 years ago
71afa38890
Add swaylock protocol, add resource destructors
...
This prevents sway crashing if swaybg or swaybar dies.
9 years ago
bf5244b49c
Fix using last output config if none matched
9 years ago
99af7e7c9c
move manpages to subfolders
9 years ago
cce9c338c0
cmake: build common code only once
...
This creates (static) libraries for protocols/, common/, and wayland/.
9 years ago
9b9d968cbf
Fix for_window [...] move scratchpad correctly
9 years ago
d098c620fe
Revert "Fix bug with for_window [...] move scratchpad"
...
This reverts commit 0796b0c475
9 years ago
0796b0c475
Fix bug with for_window [...] move scratchpad
9 years ago
98ff23b497
Fix busted install of /etc/sway/config
9 years ago
92a3538381
cmake: extract sway
9 years ago
3658777e47
Use wlc_point instead of deprecated wlc_origin
...
Struct was renamed in wlc, use the new name.
9 years ago
f3f77f9ff1
FALLBACK_CONFIG_DIR did not work. Fixed.
...
- Flag was ignored. Now it's taken into account.
- Missing trailing slashes in path now behaves properly.
9 years ago
09feef89ee
Can customize config fallback directory
...
CMake takes a `FALLBACK_CONFIG_DIR` flag which is the directory where the
standard configuration file `config` is copied at installation.
If loading from typical configuration directories fails, sway loads
FALLBACK_CONFIG_DIR/config (/etc/sway/config by default).
9 years ago
44d0f731c3
Add framework for switching command sets
...
This will allow the bar {} block to have a different command set (and
also bar { colors { } }.
9 years ago
4f89735fc4
Add bar config struct and defaults
9 years ago
3f950b6e52
Merge pull request #278 from christophgysin/merge
...
cmd_output: Merge instead of replace output config
9 years ago
b1bd3ae6f3
cmd_output: Merge instead of replace output config
9 years ago
ae7ed79573
config: Store 'enabled' as int
9 years ago
3c8763af22
cmd_output: check for missing subcommand arguments
9 years ago
5a369b3132
Only strip comments at the start of a line
...
This is necessary because i3 config files use CSS notation for colors
(i.e. #rrggbb).
9 years ago
ef91764bc7
Fix output adjustment for panels
9 years ago
e59cffcea2
Support desktop shell panels in compositor
9 years ago
9d2bbe2640
Merge pull request #274 from sce/fix_stray_floats
...
cmd_floating: Don't add non-float as sibling to float.
9 years ago
25ad3181f5
Merge pull request #276 from sce/earlier_logging
...
main: Setup logging before wlc_init.
9 years ago
c942f1624e
Merge pull request #275 from christophgysin/cmd_output
...
refactor cmd_output
9 years ago
0af15cc19e
Merge pull request #269 from christophgysin/usage
...
Add --help to print usage
9 years ago
c26a4b42cf
main: Setup logging before wlc_init.
...
If `wlc_init` fails the error message will never be logged or printed
anywhere.
9 years ago
7059eccaa1
cmd_output: Log enable/disable state
9 years ago
ffdfaaa985
apply_output_config: use list_seq_find() to find config
9 years ago
7d82cd9c0a
cmd_output: Use list_seq_find() to find matching config
9 years ago
88f372a22a
cmd_output: Cleanup cmd_output argument handling
9 years ago
badfb4bb43
cmd_floating: Don't add non-float as sibling to float.
...
When turning a float to a non-float, `get_focused_container` might
return another floating view, causing the active view to be inserted
into the floating list on its workspace instead of the normal child list
which it should. (Since it has `is_floating` as false the resulting
discrepency triggered other bad behaviour eventually leading sway to
crash.)
This patch fixes that by simply checking floating status before making
it a sibling.
9 years ago
923c3245ac
Fix option parsing
...
Using 'flag' results in duplicate code paths for short and long options.
This broke the -q short option in swaymsg, because there was:
{"quiet", no_argument, &quiet, 'q'}
Which will set quiet to 'q' and return 0, not 'q'.
9 years ago
2f2e1f3fc7
sway: Add --help option that prints usage
9 years ago
e48a16ce5e
sway: Print usage and exit on unknown options
9 years ago
3ba33321de
Use macros for exit values
9 years ago
c477bbf345
Add warnings about invalid output commands
...
This handles some cases where sway will crash if an output command is
invalid/missing an argument.
9 years ago
20cb390323
sway/main: Move wlc init to after args are handled.
...
First of all because it's not needed that early, and second of all
because there's a bug where calling `sway --get-socketpath` via `popen`
causes the child sway process to spin/hang instead of returning EOF.
(Specifically `(unset SWAYSOCK; swaymsg)` hangs.) This patch fixes that.
(Also note that this patch moves the "detailed review" comment, so I
guess this patch requires extra detailed review?)
9 years ago
1661edee28
Allow output config for output named *
...
Which will match any output.
9 years ago
2f192cceca
Improve config file loading
...
This also makes it so that your i3 config is used before
/etc/sway/config.
9 years ago
2d0f78c0d6
workspace: Learn sticky.
...
A floating window that's sticky will move to the new active workspace
whenever the workspace on the same output changes.
9 years ago
db642fc8c5
commands: code formatting: Sort list of commands by alphabet.
9 years ago
cbd7348704
Merge pull request #265 from sce/better_logging
...
debug_log: Improve container_log so that debug lines are aligned.
9 years ago
cad2694a3c
Merge pull request #264 from sce/fix_ws_next_name
...
workspace: Improve workspace_next_name.
9 years ago
c1d88acf72
debug_log: Improve container_log so that debug lines are aligned.
...
Makes the log easier to read, and the developers more happy (this one at
least).
9 years ago
0a78af0acc
workspace: Improve workspace_next_name.
...
This function looks for bound commands that start with `workspace` (ie.
the commands that change to a static workspace) and fetches the
workspace name.
However, if it's actually a list of commands, then the parsing will pick
up the delimiter ("," or ";") and also fail to recognize keywords
("next" etc).
This patch fixes that by properly separating with delimiters.
9 years ago
d9770cc243
cmd_floating: Support `enable` and `disable` commands too.
...
This is especially relevant in combination with `for_window`, e.g.:
`for_window [title="Terminal"] floating enable`.
9 years ago
27f03c705d
Move IPC client into common, refactor IPC
9 years ago
53d353e6b4
Add "variant": "sway" to IPC version response
9 years ago
9a15371ba3
Parse command line args for swaymsg
9 years ago
206606b32c
Merge pull request #261 from christophgysin/exec
...
Call swaybg without invoking a shell
9 years ago
e362f871d9
Call swaybg without invoking a shell
...
This makes escaping the arguments obsolete.
Also avoid dynamic memory allocation for the output id. It only supported ids up
to 99. Now we support up to 999, and take 4 bytes off the stack instead.
9 years ago
be3fae148b
swaybg: implement scaling mode "fit"
9 years ago
9fb020d04c
Merge pull request #251 from sce/criteria_1
...
criteria: Add. Learn for_window command.
9 years ago
5483fe1883
criteria: Code formatting.
9 years ago
eeb7f5c036
config: print line number
9 years ago
a06cb7cd01
criteria: Add. Learn for_window command.
...
A criteria is a string in the form of `[class="regex.*" title="str"]`.
It is stored in a struct with a list of *tokens* which is a
attribute/value pair (stored as a `crit_token` struct). Most tokens will
also have a precompiled regex stored that will be used during criteria
matching.
for_window command: When a new view is created its metadata is tested
against all stored criteria, and if a match is found the associated
command list is executed.
Unfortunately some metadata is not available in sway at the moment
(specifically `instance`, `window_role` and `urgent`). Any criteria
string that tries to match an unsupported attribute will fail.
(Note that while the criteria code can be used to parse any criteria
string it is currently only used by the `for_window` command.)
9 years ago
a99aa92bc6
extensions: add missing include
...
This fixes a compiler warning:
../sway/extensions.c: In function ‘set_background’:
../sway/extensions.c:16:37: warning: implicit declaration of function ‘malloc’ [-Wimplicit-function-declaration]
struct background_config *config = malloc(sizeof(struct background_config));
^
../sway/extensions.c:16:37: warning: incompatible implicit declaration of built-in function ‘malloc’
../sway/extensions.c:16:37: note: include ‘<stdlib.h>’ or provide a declaration of ‘malloc’
9 years ago
e31a899841
layout: get_swayc_in_direction_under: Handle floating views.
9 years ago
b5ddad4bf6
layout: swap_container: Handle floating views.
9 years ago
ed1b0bffbc
layout: replace_child: Handle floating views.
9 years ago
8aef255d5f
layout: add_sibling: Handle floating views properly.
...
This should fix #241 .
9 years ago
a6c9f40b9a
sway_binding_cmp_keys: Differentiate between modifier keys.
...
Compare modifiers as well as keys when number of modifiers+keys are the
same (so that e.g. mod1+x != mod4+x).
9 years ago
db92920cf9
handle_command: Skip commands that has a criteria string.
...
We can't handle them currently (the criteria needs to e.g. be passed to
each command handler which then needs to do the right thing), so it's
better to just do nothing than to create unexpected results (because the
command was executed on the wrong view).
(Before this patch any command list with a criteria string would simply
fail to parse, so this is at least a step in the right direction.)
9 years ago
b7e3d05ace
stringop: Properly handle criteria strings.
...
A criteria string (e.g. '[class="something" title="something"]') is now
correctly treated as a single argument.
9 years ago
4367e6d3e3
container: Store app_id attribute for views.
9 years ago
47c313fe3e
container: Store class attribute for views.
9 years ago
9d50f88cef
fix list sorting
9 years ago
a0c5a0bb30
cmd_bindsym: Detect/handle duplicates.
...
Also replace `bindsym_sort` with function `sway_binding_cmp` that takes
all data into account when comparing.
9 years ago
9ce5d635f1
commands: Comment/doc for config_command.
9 years ago
Mikkel Oscar Lyderik
Drew DeVault
S. Christoffer Eliesen
progandy
Yacine Hmito
Streetwalrus Einstein
Drew DeVault
Kevin Hamacher
Christoph Gysin
taiyu