Instead of tracking gaps per child apply gaps in two logical places:
1. In tiled containers use the layout code to add the gaps between
windows. This is much simpler and guarantees that the sizing of children
is correct.
2. In the workspace itself apply all the gaps around the edge. Here
we're in the correct position to size inner and outer gaps correctly and
decide on smart gaps in a single location.
Fixes#4296
Instead of using container->width/height as both the input and output
of the layout calculation have container->width_fraction/height_fraction
as the share of the parent this container occupies and calculate the
layout based on that. That way the container arrangement can always be
recalculated even if width/height have been altered by things like
fullscreen.
To do this several parts are reworked:
- The vertical and horizontal arrangement code is ajusted to work with
fractions instead of directly with width/height
- The resize code is then changed to manipulate the fractions when
working on tiled containers.
- Finally the places that manipulated width/height are adjusted to
match. The adjusted parts are container split, swap, and the input
seat code.
It's possible that some parts of the code are now adjusting width and
height only for those to be immediately recalculated. That's harmless
and since non-tiled containers are still sized with width/height
directly it may avoid breaking other corner cases.
Fixes#3547Fixes#4297
This adds a --reload flag to cmd_bindswitch that allows for the binding
to be executed on reload. One possible use case for this is to allow
users to disable outputs when the lid closes and enable them when the
lid opens without having to open and re-close the lid after a reload.
Without this change, the handlers listed in the config_handlers or
command_handlers arrays (depending on reading or active) in commands.c
would be valid subcommands. To make matters worse, they would also take
precedence over the defined subcommand handlers.
This corrects find_handler to only work on the handler array given
instead of implicitly trying others.
Currently container_replace removes the container from the scratchpad
and re-adds it afterwards. For the split commands this results in the
container being send to the scratchpad, which results in a NULL segfault
if the same container should be shown.
Pass an optional workspace to root_scratchpad_add_container, if the
workspace is passed the window will continue to show on the workspace.
If NULL is passed it is sent to the scratchpad.
This was an issue if no other window except the scratchpad container was
on the workspace.
Fixes#4240
This adds the logic to defer binding execution while sway is still
initializing. Without this, the binding command would be executed, but
the command handler would return CMD_DEFER, which was being treated as
a failure to run. To avoid partial executions, this will defer all
bindings while config->active is false.
This allows for an optional validation stage when storing an input
config. Currently, only the xkb keymap is validated. If storing the
delta input config will result in any invalid xkb keymaps, the input
config will not be stored and error will be populated with the first
line of the xkbcommon log.
Before the delta input config is stored, this attempts to compile a
keymap with it. If the keymap fails to compile, then the first line of
the xkbcommon log entry will be included with a `CMD_FAILURE`, the
entire xkbcommon log entry will be included in the sway error log, and
the delta will not be stored.
This only handles basic issues such as a layouts not existing. This
will NOT catch more complex issues such as when a variant does
exist, but not for the given layout (ex: `azerty` is a valid variant,
but the `us` layout does not have a `azerty` variant).
New 'seat <name> xcursor_theme <theme> [<size>]' command that
configures the default xcursor theme.
The default seat's xcursor theme is also propagated to XWayland, and
exported through the XCURSOR_THEME and XCURSOR_SIZE environment
variables. This is done every time the default seat's configuration is
changed.
Subsurfaces need access to the parent get_root_coords impl for positioning in
popups. To do this, we store a reference to the parent view_child where
applicable.
Fixes#4191.
This attempts to use the default keymap when the one defined in the
input config fails to compile. The goal is to make it so the keyboard
is always in a usable state, even if it is not the user's requested
settings as usability is more important.
This also removes the calls to `getenv` for the `XKB_DEFAULT_*` family
of environment variables. The reasoning is libxkbcommon will fallback
to using those (and then the system defaults) when any of the rule
names are `NULL` or an empty string anyway so there is no need for
sway to duplicate the efforts.
* `bindsym --to-code` enables keysym to keycode translation.
* If there are no `xkb_layout` commands in the config file, the translation
uses the XKB_DEFAULT_LAYOUT value.
* It there is one or more `xkb_layout` command, the translation uses
the first one.
* If the translation is unsuccessful, a message is logged and the binding
is stored as BINDING_KEYSYM.
* The binding keysyms are stored and re-translated when a change in the input
configuration may affect the translated bindings.
Add support for configurations that apply to a type of inputs
(i.e. natural scrolling on all touchpads). A type config is
differentiated by a `type:` prefix followed by the type it
corresponds to.
When new devices appear, the device config is merged on top of its
type config (if it exists). New type configs are applied on top of
existing configs.
Use libinput_device_config_tap_get_finger_count to determine whether
a pointer is a touchpad.
swaymsg is also updated to reflect the new touchpad type.
When setting fullscreen on a hidden scratchpad container, there was a
check to see if there was an existing fullscreen container on the
workspace so it could be fullscreen disabled first. Since the workspace
is NULL, it would cause a SIGSEGV. This adds a NULL check to avoid the
crash.
This also changes the behavior of how fullscreen is handled when adding
a container to the scratchpad or changing visibility of a scratchpad
container to match i3's. The behavior is as follows:
- When adding a container to the scratchpad or hiding a container back
into the scratchpad, there is an implicit fullscreen disable
- When setting fullscreen on a container that is hidden in the
scratchpad, it will be fullscreen when shown (and fullscreen disabled
when hidden as stated above)
- When setting fullscreen global on a container that is hidden in the
scratchpad, it will be shown immediately as fullscreen global. The
container is not moved to a workspace and remains in the
scratchpad. The container will be visible until fullscreen disabled
or killed. Since the container is in the scratchpad, running
`scratchpad show` or `move container to scratchpad` will have no
effect
This also changes `container_replace` to transfer fullscreen and
scratchpad status.
This honors the fullscreen output request for
`xdg_toplevel_set_fullscreen` and `zxdg_toplevel_v6_set_fullscreen`.
If the request was sent before mapping, the fullscreen output request
will be retrieved from the client_pending state for the toplevel. The
output will be passed to `view_map` and if there is a workspace on the
output, the view will be placed on that workspace.
If the request comes in after being mapped, the view will be moved to
the workspace on the output (if there is one) before becoming
fullscreen.
This makes it so there will only be one swaybg instance running
instead of one per output. swaybg's cli has been changed to a xrandr
like interface, where you select an output and then change properties
for that output and then select another output and repeat. This also
makes it so swaybg is only killed and respawned when a background
changes or when reloading.
This matches i3's behavior of setting scratchpad containers to 50% of
the workspace's width and 75% of the workspace's height, bound by the
minimum and maximum floating width/height.
This fixes a crash in `container_init_floating` when a xwayland view
sends a configure request while in the scratchpad.
`container_init_floating` gets called so the configured minimum and
maximum sizes gets respected when resizing to the requested size. Since
the workspace was NULL, it would SIGSEGV when attempting to get the
workspace's output for the output box retrieval.
This extracts the resizing portion of `container_init_floating` into a
separate function. If the container is in the scratchpad, it will just
be resized and skip the centering.
Additionally, `container_init_floating` has been renamed to
`container_floating_resize_and_center` to more accurately describe what
it does.
This implements the following command to set/unset a user idle
inhibitor for a view:
`inhibit_idle focus|fullscreen|open|none|visible`
The modes are as follows:
- focus: inhibited when the view is focused by any seat
- fullscreen: inhibited when the view is fullscreen (or a descendant of
a fullscreen container) and is visible on any output
- open: inhibited until the view is closed or the inhibitor is unset or
changed
- none: unsets any user set idle inhibitors for the view
- visible: inhibited when the view is visible on any output
This should have no effect on idle inhibitors set by the applications
themselves and those should still work as intended.
Since this operates on the view in the handler context, it is possible
to set it on the currently focused view, on any existing view with
criteria, or for any future view with for_window.
Many laptop screens report unknown subpixel order. Allow users to manually set subpixel hinting to work around this.
Addresses https://github.com/swaywm/sway/issues/3163
This change adds support for renaming a workspace when `exec` command
is being processed by keeping sway_workspace and pid_workspace names in
sync.
The change can be verified by running following command:
swaymsg exec <application>; swaymsg rename workspace number 1 to 5
Fixes: #3952
This fixes the behavior of `__focused__` when there is no focused view
to match i3's behavior of successfully matching no views instead of
returning an error of a missing value. It also applies the same logic
when a token is not applicable (or unset) for a view such as `app_id`
for a focused xwayland view or `class` for a focused xdg-shell view.
This adds an `autofail` boolean to `struct criteria`. If it is set to
`true`, then `criteria_matches_view` will immediately bail out as a
no match. If `autofail` is set, the criteria will also not be
considered empty by `criteria_is_empty`.
To set this new `autofail` property, `get_focused_prop` will now take
in a boolean pointer of the same name. If `__focused__` is supported
for the token and there is no focused view or the focused view does not
have a value for the token, then the boolean will be set to true. In
`parse_token`, the boolean value will be checked and if set to true,
then `criteria->autofail` will be set to true and `parse_token` will
bail successfully. Tokens will still be parsed to make sure the whole
criteria is syntactically valid, which is also why
`&criteria->autofail` is not passed to `get_focused_prop` and a local
boolean is declared in `parse_token`.
This commit adds support for laptop lid and tablet
mode switches as provided by evdev/libinput and
handled by wlroots.
Adds a new bindswitch command with syntax:
bindswitch <switch>:<state> <command>
Where <switch> is one of:
tablet for WLR_SWITCH_TYPE_TABLET_MODE
lid for WLR_SWITCH_TYPE_LID
<state> is one of:
on for WLR_SWITCH_STATE_ON
off for WLR_SWITCH_STATE_OFF
toggle for WLR_SWITCH_STATE_TOGGLE
(Note that WLR_SWITCH_STATE_TOGGLE doesn't map to
libinput and will trigger at both on and off events)
This introduces a `default` seat operation which is used when no mouse
buttons are being held. This means there is now always a seat operation
in progress. It allows us to separate `default` code from the standard
cursor management code.
The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and
`end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are
only used by the default seatop. `end` is called when a seatop is being
replaced by another one and allows the seatop to free any resources,
though no seatop currently needs to do this. `finish` is no longer
required, as each seatop can gracefully finish in their `button`
callback. And `abort` is not needed, as calling `end` would achieve the
same thing. The struct has also gained a bool named allow_set_cursor
which allows the client to set a new cursor during `default` and `down`
seatops.
Seatops would previously store which button they were started with and
stop when that button was released. This behaviour is changed so that it
only ends once all buttons are released. So you can start a drag with
$mod+left, then click and hold right, release left and it'll continue
dragging while the right button is held.
The motion callback now accepts dx and dy. Most seatops don't use this
as they store the cursor position when the seatop is started and compare
it with the current cursor position. This approach doesn't make sense
for the default seatop though, hence why dx and dy are needed.
The pressed_buttons array has been moved from the sway_cursor struct to
the default seatop's data. This is only used for the default seatop to
check bindings. The total pressed button count remains in the
sway_cursor struct though, because all the other seatops check it to
know if they should end.
The `down` seatop no longer has a `moved` property. This was used to
track if the cursor moved and to recheck focus_follows_mouse, but seems
to work without it.
The logic for focus_follows_mouse has been refactored. As part of this
I've removed the call to wlr_seat_keyboard_has_grab as we don't appear
to use keyboard grabs.
The functions for handling relative motion, absolute motion and tool
axis have been changed. Previously the handler functions were
handle_cursor_motion, handle_cursor_motion_absolute and
handle_tool_axis. The latter two both called cursor_motion_absolute.
Both handle_cursor_motion and cursor_motion_absolute did very similar
things. These are now simplified into three handlers and a single common
function called cursor_motion. All three handlers call cursor_motion. As
cursor_motion works with relative distances, the absolute and tool axis
handlers convert them to relative first.
This removes `output_find_config`, which would take the first matching
output config it found. This is fine if only a name output config,
identifier output config, or even just wildcard exist, but if there is
a name output config and identifier output config, they are not merged.
Instead, this introduces find_output_config, which is just a wrapper
for `get_output_config`. This ensures that both the name and identifier
output configs are respected.
This fixes the following case:
- For simplicity in this example, remove all output configs from config
- Run `swaymsg output <name> bg #ff0000 solid_color`
- Run `swaymsg output <identifier> scale 2`
- Disconnect and reconnect output
Without this, the output will have the background, but not the scale.
With this, the output will have both the background and scale
It turns out sending button events during all seat operations is not
desirable. This patch introduces a new property
`seatop_impl.allows_events` which allows each operation to define
whether button events should be passed to the surface or not.
The `down` seat operation is the only one that supports this. As all the
other seatops don't support it, the calls to seat_pointer_notify_button
prior to starting them have been removed.
Since not all child views's have an unmap event, it is possible for it
to still be mapped (default state) in the destruction handler. When
the destruction handler is called, the corresponding view may have
already been freed and the memory location reallocated. This adds a
listener for the view unmapping and removes the mapped status. This
ensures that the child view is damaged due to destruction while the
view still exists and not after.
This changes the way zero (which is the default) is interpreted for both
the width and height of `floating_maximum_size`. It now refers to the
width and height of the entire output layout, which matches i3's
behavior.
This also removes duplicated code to calculate the floating constraints
in three files. Before this, `container_init_floating` used two-thirds
of the workspace width/height as the max and the entire workspace
width/height was used everywhere else. Now, all callers use a single
function `floating_calculate_constraints`.
All seat operations except "down" eat the button pressed event and don't send
it to clients. Thus, when ending such seat operations we shouldn't send the
button released event.
This commit moves the logic used to send pressed/released into the "down"
operation.
Enables i3-compatible behavior regarding hiding the title bar on tabbed and
stacked containers with one child.
Related issues and merge requests: #3031, #3002, #2912, #2987.
Pedro Côrte-Real
Brian Ashworth
Sebastian Parborg
Sergei Dolgov
Rouven Czerwinski
Simon Ser
Daniel Eklöf
Kenny Levinsen
Josef Gajdusek
Moelf
Konstantin Pospelov
Alex Maese
Connor E
Benjamin Cheng
Benjamin Cheng
Geoff Greer
mliszcz
Ryan Walklin
Ryan Dwyer
db