daaec72ac0 ("desktop/xwayland: restack surface upon activation")
has updated Sway for wlroots commit bfc69decdd04 ("xwm: do not
restack surfaces on activation"). However, it unconditionally
restacks the window above all other windows even if marking the
window as inactive.
Closes: https://github.com/swaywm/sway/issues/7974
Commit 188811f808 ("scene_graph: Port layer_shell") accidentally
removed code in `arrange_layers` to handle focus on layer shell
surfaces with keyboard interactivity.
Due to this, layer shell surfaces requesting exclusive keyboard
interactivity may not get automatically focused, and layer shell
surfaces giving up exclusive keyboard interactivity can remain focused.
Add the previous code back to fix the problem.
Note the non-rename change included in b4d7e84d38 ("desktop: Rename
layers to shell_layers") is not included as it also seems accidental.
Fixes: #7936
1e0031781f refactored repaint to accumulate all changes in a single
wlr_output_state and commit them at the end of the repaint loop,
replacing a call to wlr_scene_output_commit. wlr_scene_output_commit
contains an early bail-out when no frame has been requested and no
damage has accumulated, which was not replicated as part of this
refactor, causing the repaint loop to never pause.
Replicate the logic to stop the repaint loop as needed.
Fixes: 1e0031781f ("desktop/output: unify page-flip codepath")
If the launched client decides to pass it's token along as an activation
request, allow that. This will make the behavior match tokens provided by
an external launcher client.
When a floating container has a titlebar, render_backing_buffer()
ends up being called each time the container is moved. Add some
more checks for no-op changes in sway_text_node_set_max_width()
and sway_text_node_set_background(). This makes the move smoother.
the surface isn't initialized yet when we first handle it in
`handle_xdg_shell_toplevel`, move setting WM capabilities to
handle_commit instead.
Fixes warnings from wlroots about a configure being scheduled for
uninitialized surface
"The compositor must not send this event if the wl_keyboard did not
have an active surface immediately before this event. The compositor
must not send this event if state is pressed (resp. released) and the
key was already logically down (resp. was not logically down)
immediately before this event."
From https://gitlab.freedesktop.org/wayland/wayland/-/merge_requests/382
Adaptive sync is a "soft" setting which we degrade of off when not
supported. Some outputs types do not support turning it off (Wayland,
X11), which makes for an awkward three-way test where we first enable,
disable and finally unset the setting.
wlr_output.adaptive_sync_supported tells us whether the output
definitely does not support making changes (backend without support,
connector without the feature), or whether it might work.
Use this to avoid wasting time on adaptive sync test that can never
succeed, and to avoid the Wayland/X11-backend specific unset step.
Instead of having a special codepath for applying gamma LUTs, have
a single codepath for regular page-flips and gamma LUT updates.
Should make it easier to add more logic on top e.g. for tearing
page-flips.
We were only passing the color transform when calling
wlr_scene_output_commit(). However when modesetting or pushing a
new gamma LUT we render via wlr_scene_output_build_state(). Pass
the color transform there as well.
The only reason it's included there is for a declaration of
struct sway_server, but we can just forward-declare it.
This avoids rebuilding almost all of Sway when touching server.h.
All other server.h includes are from source files, not headers.
Regular Wayland clients shouldn't care about the position or size
of outputs. Hide xdg_output from unprivileged clients to make sure
they're not doing shenanigans with this information.
If a floating window is using CSD, the geometry should not be used to
define the clipping region. Otherwise drop shadows and such may be
clipped excessively.
Instead of having a build-time option to enable/disable xwayland
support, just use the wlroots build config: enable xwayland in
Sway if it was enabled when building wlroots. I don't see any
use-case for disabling xwayland in Sway when enabled in wlroots:
Sway doesn't pull in any additional dependency (just pulls in
dependencies that wlroots already needs). We have a config command
to disable xwayland at runtime anyways.
This makes it so xwayland behaves the same way as other features
such as libinput backend and session support. This also reduces
the build matrix (less combinations of build options).
I think we originally introduced the xwayland option when we didn't
have a good way to figure out the wlroots build config from the
Sway build system.
If there's no config for the output, oc is null, but some screens might
have a default rotation, causing the log call to dereference a null
pointer.
Signed-off-by: Anna (navi) Figueiredo Gomes <navi@vlhl.dev>
Instead of having each search function print its various test decisions,
print the full state at the end of every search. This makes it much
clearer what state a particular test includes.
The original sway output config implementation enabled one output at a
time, testing modes, render formats and VRR support as it went along.
While this sort of fallback is easy to do, it has the downside of not
considering the effect of neighbor outputs on the configuration
viability.
With backend-wide commits, we can now better consider the effect of
neighbor outputs, but to handle the fact that we commit all outputs at
once we need to perform a more elaborate search of viable
configurations.
Implement a recursive configuration search for when the primary
configuration failed to apply.
When storing a config, we need to find the output that is being
configured to extract its identifier. output_by_name_or_id does not
return outputs that are disabled, and using this makes it impossible to
merge configurations related to disabled outputs.
Switch to all_outputs_by_name_or_id.
Fixes: https://github.com/swaywm/sway/issues/8141
We want to check if a config_head existed for the current
matched_output_config, so we should check cfg->output. sway_output is a
temporary variable from a previous wl_list_for_each, and does not
contain anything useful to us.
Fixes: https://github.com/swaywm/sway/issues/8128
If there is no output currently connected, we still want to merge
to any existing config.
It shouldn't matter to iterate over the list of outputs to do
nothing anwyays.
../sway/config/output.c:33:21: runtime error: member access within null pointer of type 'struct sway_output'
AddressSanitizer:DEADLYSIGNAL
=================================================================
==7856==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000080 (pc 0x63da8558205c bp 0x7ffdc35881a0 sp 0x7ffdc3588160 T0)
==7856==The signal is caused by a READ memory access.
==7856==Hint: address points to the zero page.
#0 0x63da8558205c in output_get_identifier ../sway/config/output.c:33
#1 0x63da855865c3 in store_output_config ../sway/config/output.c:220
#2 0x63da855d4066 in cmd_output ../sway/commands/output.c:106
#3 0x63da8547f2e3 in config_command ../sway/commands.c:425
#4 0x63da8548f3fc in read_config ../sway/config.c:822
#5 0x63da8548a224 in load_config ../sway/config.c:435
#6 0x63da8548b065 in load_main_config ../sway/config.c:507
#7 0x63da854bee8d in main ../sway/main.c:351
#8 0x77e2ea643ccf (/usr/lib/libc.so.6+0x25ccf) (BuildId: c0caa0b7709d3369ee575fcd7d7d0b0fc48733af)
#9 0x77e2ea643d89 in __libc_start_main (/usr/lib/libc.so.6+0x25d89) (BuildId: c0caa0b7709d3369ee575fcd7d7d0b0fc48733af)
#10 0x63da8547ad64 in _start (/home/simon/src/sway/build/sway/sway+0x372d64) (BuildId: 3fa2e8838c1c32713b40aec6b1e84bbe4db5bde8)
Fixes: 1267e47de9 ("config/output: Refactor handling of tiered configs")
Output configuration can be applied to a particular output in three
ways: As a wildcard, by connector name and by identifier. This in turn
means that three different configurations must be handled at any given
time.
In the current model, this is managed by merging new configuration into
every other matching configuration. At the same time, an additional
synthetic configuration is made which matchehes both identifier and name
at the same time, further complicating logic.
Instead, manage and store each configuration independently and merge
them in order when retrieving configuration for an output. When changes
are made to a less specific configuration, clear these fields from more
specific configurations to allow the change to take effect regardless of
precedence.
Fixes: https://github.com/swaywm/sway/issues/8048
Without this change, i see the following in the sway-ipc manpage:
```
9. GET_CONFIG
MESSAGE
Retrieve the contents of the config that was last loaded
REPLY
An object with a single string property containing the contents of the
config
Example Reply:
{
"config": "set $mod Mod4nbindsym $mod+q exitn"
}
```
apply_output_config_to_outputs uses the specified output config to check
which outputs to apply to, and to use as backup when no config is found.
If any config matches the output, the specified config will be
disregarded.
The only remaining user of apply_output_config_to_outputs is
reset_outputs, which called apply_output_config_to_outputs with either
the first stored wildcard config, or a new empty wildcard config.
Providing a stored or empty wildcard config is practically the same as
calling `apply_all_output_configs`. Replace uses of `reset_outputs` with
`apply_all_output_configs` and remove the now unused functions.
Introduce apply_output_configs, which applies the specified matched
output configs as a single backend commit.
Reimplement apply_output_config_to_outputs using apply_output_configs.
Applying an output config has two stages: Atomic application of
wlr_output_state, and applicaiton of non-atomic state like output
layout.
Split the latter out into finalize_output_config for use in a later
commit.
If we can't create the XKB keymap used for keysym translation,
gracefully error out instead of crashing. This can happen if the
XKB_DEFAULT_LAYOUT is set to an invalid value, for instance.
Closes: https://github.com/swaywm/sway/issues/7789
My code archaeology isn't good enough to determine what this is here
for, but it isn't correct. We should be able to move containers in a
direction without focusing them. AFAICT i3 doesn't do this, so we
shouldn't either.
This fixes ipc commands like move <dir> with criteria that apply to
containers which are not the current focus.
i3 has had this property for over a decade but it wasn't documented
until a couple of years ago, so it was likely missed when developing
sway. Add the property to get us closer to ipc parity with i3.
Check if the app that requested a token has provided a valid input
serial and a focused surface. Downgrade activation request to urgency
otherwise.
This is mostly in line with what other Wayland compositors decided to
do, and offers a better security than the original logic.
We tried to synchronize layer shell popups with the parent layer shell
on commits, but this is subtly wrong because we would only update
the position for one layer shell that was committed, but not any other
layer that might be affected. By moving handling to the scene descriptor
we can iterate all popups and ensure they are synchronized.
Alexander Orzechowski
Kirill Primak
Simon Ser
Ricardo Steijn
Joan Bruguera Micó
Kenny Levinsen
Bill Li
Ronan Pigott
Tarcísio Eduardo Moreira Crocomo
llyyr
novenary
bretello
Manuel Stoeckl
thal
Anna (navi) Figueiredo Gomes
Ferdinand Bachmann
Daniel Kahn Gillmor
Andri Yngvason
Luofan Chen
llyyr
Access
Aleksei Bavshin
Merlin Lex
Violet Purcell