since wayland doesn't provide a touch id in cancel events, track what
points are active so we can cancel all of them
timestamp is also not provided - use 0 because no one's paying attention
to that anyway
Closes#3000
Instead of destroying all seats, destroy a single one. We only need
to destroy all seats at one call-site (backend_destroy), but we'll
need to destroy a single seat elsewhere in the next commit.
Since 1d581656c7 ("backend/drm: set "max bpc" to the max") we
set the "max bpc" property to the maximum value. The kernel driver
is supposed to clamp this value depending on hardware capabilities.
All kernel drivers lower the value depending on the GPU capabilities.
However, none of the drivers lower the value depending on the DP-MST
link capabilities. Thus, enabling a 4k@60Hz mode can fail on some
DP-MST setups due to the "max bpc" property.
Additionally, it's not a good idea to unconditionally set "max bpc"
to the max. A high bpc consumes more lanes and more clock speed,
which means higher power consumption and the busy lanes cannot be
used for something else (e.g. other data transfers on a USB-C cable).
For now, let's tie the "max bpc" to the pixel format of the buffer.
Introduce a heuristic to make "high bit-depth buffer" a synonym of
"I want the best quality".
This is not perfect: a "max bpc" higher than 8 might be desirable
for pixel formats with a color depth of 8 bits, for instance when
the color management KMS properties are used. But we don't really
support that yet, so let's leave this for later.
Closes: https://github.com/swaywm/sway/issues/7367
We only need it for one thing: gamma size. Moreover, some bits in
the drmModeCrtc will become out-of-date, for instance the current
mode, so let's avoid caching the whole struct and only keep what
we know won't change.
Instead of having a pending_fb field on the struct wlr_drm_plane,
move it to struct wlr_drm_connector_state. That way, there's no
risk having a stale pending FB around: the state doesn't survive
across tests and commits.
The cursor is a special case because it's disconnected from the
atomic state: the wlr_backend_impl.set_cursor hook sets the cursor
for the next commit. Move the field to
wlr_drm_connector.cursor_pending_fb.
We'll move the pending primary FB into the connector state in the
next commit, dropping wlr_drm_plane.pending_fb in the process.
Introduce a dedicated field for the cursor, which has to be managed
in a special way due to our set_cursor API.
This avoids re-building the whole project when switching one
Meson option. This shrinks down the compiler invocation command
line, making it more readable and making it easier to inspect
which flags are passed in (the generated file can be opened).
Additionally this is more consistent with our external feature
handling, which uses <wlr/config.h> already.
This field becomes stale too easily: for instance, see 6adca4089c
("backend/drm: don't unconditionally set desired_enabled").
Additionally, drm_connector_alloc_crtc() needs to do some weird
dance, restoring its previous value.
Instead, add a connector arg to realloc_crtcs() to indicate a new
connector we want to enable.
We were firing the new_input signal on backend initialization,
before the compositor had the chance to add a listener for it.
Mimick what's done for wl_keyboard: if the backend hasn't been
started, delay wl_touch initialization.
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3473
On newer versions of libinput, the event LIBINPUT_EVENT_POINTER_AXIS
has been deprecated in favour of LIBINPUT_EVENT_POINTER_SCROLL_WHEEL,
LIBINPUT_EVENT_POINTER_SCROLL_FINGER and
LIBINPUT_EVENT_POINTER_SCROLL_CONTINUOUS.
Where new events are provided by the backend, ignore
LIBINPUT_EVENT_POINTER_AXIS, receive high-resolution scroll events from
libinput and emit the appropiate wlr_pointer signal.
"max bpc" is a maximum value, the driver is free to choose a
smaller value depending on the bandwidth available.
Some faulty monitors misbehave with higher bpc values. We'll add
a workaround if users get hit by these in practice.
References: https://gitlab.freedesktop.org/wayland/weston/-/issues/612
CTA-861-G says that "graphics" is used to indicate non-analog (ie,
digital) content. With that bit set, the sink should turn off analog
reconstruction and other related filtering.
Maintaining our internal table up-to-date is tedious: one needs to
manually go through the PnP ID registry [1] and check whether we're
missing any entry.
udev_hwdb already has an API to fetch a manufacturer name from its
PnP ID. Use that instead.
[1]: https://uefi.org/pnp_id_list
All the code logic related to the pointer has been moved to its own file.
The seat is responsible for the lifetime of its wlr_wl_pointer(s), and assigning
them to the relevant wlr_wl_output. The wlr_wl_pointer becomes a simple helper
to manager the wlr_pointer associated to the seat's wl_pointer and its lifetime.
The destroy callback in wlr_tablet_tool_impl has been removed. The function
`wlr_tablet_tool_finish` has been introduced to clean up the resources owned by
a wlr_tablet_tool.
`wlr_input_device_destroy` no longer destroys the wlr_tablet_tool, attempting to
destroy a wlr_tablet_tool will result in a no-op.
The field `name` has been added to the wlr_tablet_tool_impl to be able to
identify a given wlr_tablet_tool device.
The destroy callback in wlr_tablet_pad_impl has been removed. The function
`wlr_tablet_pad_finish` has been introduced to clean up the resources owned by a
wlr_tablet_pad.
`wlr_input_device_destroy` no longer destroys the wlr_tablet_pad, attempting to
destroy a wlr_tablet_pad will result in a no-op.
The field `name` has been added to the wlr_tablet_pad_impl to be able to identify
a given wlr_tablet_pad device.
Sometimes the headless backend is used standalone with the Pixman
renderer, sometimes it's used together with another backend which
has already picked a DRM FD. In both of these cases it doesn't make
sense to pick a DRM FD.
Broadly speaking the headless backend doesn't really care which DRM
device is used for the buffers it receives. So it doesn't really
make sense to tie it to a particular DRM device.
Let the backend users (e.g. wlr_renderer_autocreate) open an arbitrary
DRM FD as needed instead.
This field's ownership is unclear: it's in wlr_input_device, but
it's not managed by the common code, it's up to each individual
backend to use it and clean it up.
Since this is a backend implementation detail, move it to the
backend-specific structs.
There's no guarantee that the parent Wayland compositor uses
CLOCK_MONOTONIC for reporting presentation timestamps, they could
be using e.g. CLOCK_MONOTONIC_RAW or another system-specific clock.
Forward the value via wlr_backend_impl.get_presentation_clock.
References: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/3254#note_1143061
The BO handle table exists to avoid double-closing a BO handle,
which aren't reference-counted by the kernel. But if we can
guarantee that there is only ever a single ref for each BO handle,
then we don't need the BO handle table anymore.
This is possible if we create the handle right before the ADDFB2
IOCTL, and close the handle right after. The handles are very
short-lived and we don't need to track their lifetime.
Because of multi-planar FBs, we need to be a bit careful: some
FB planes might share the same handle. But with a small check, it's
easy to avoid double-closing the same handle (which wouldn't be a
big deal anyways).
There's one gotcha though: drmModeSetCursor2 takes a BO handle as
input. Saving the handles until drmModeSetCursor2 time would require
us to track BO handle lifetimes, so we wouldn't be able to get rid
of the BO handle table. As a workaround, use drmModeGetFB to turn the
FB ID back to a BO handle, call drmModeSetCursor2 and then immediately
close the BO handle. The overhead should be minimal since these IOCTLs
are pretty cheap.
Closes: https://github.com/swaywm/wlroots/issues/3164
Expose the panel orientation with wlr_drm_connector_get_panel_orientation.
Leave it to the compositor to consume this information and configure the
output accordingly.
Closes: https://github.com/swaywm/wlroots/issues/1581
Previously, we were copying wlr_output_state on the stack and
patching it up to be guaranteed to have a proper drmModeModeInfo
stored in it (and not a custom mode). Also, we had a bunch of
helpers deriving DRM-specific information from the generic
wlr_output_state.
Copying the wlr_output_state worked fine so far, but with output
layers we'll be getting a wl_list in there. An empty wl_list stores
two pointers to itself, copying it on the stack blindly results in
infinite loops in wl_list_for_each.
To fix this, rework our DRM backend to stop copying wlr_output_state,
instead add a new struct wlr_drm_connector_state which holds both
the wlr_output_state and additional DRM-specific information.
Using GBM to import DRM dumb buffers tends to not work well. By
using GBM we're calling some driver-specific functions in Mesa.
These functions check whether Mesa can work with the buffer.
Sometimes Mesa has requirements which differ from DRM dumb buffers
and the GBM import will fail (e.g. on amdgpu).
Instead, drop GBM and use drmPrimeFDToHandle directly. But there's
a twist: BO handles are not ref'counted by the kernel and need to
be ref'counted in user-space [1]. libdrm usually performs this
bookkeeping and is used under-the-hood by Mesa.
We can't re-use libdrm for this task without using driver-specific
APIs. So let's just re-implement the ref'counting logic in wlroots.
The wlroots implementation is inspired from amdgpu's in libdrm [2].
Closes: https://github.com/swaywm/wlroots/issues/2916
[1]: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/110
[2]: 1a4c0ec9ae/amdgpu/handle_table.c
This allows the kernel to access our buffer damage. Some drivers
can take advantage of this, e.g. for PSR2 panels (Panel Self
Refresh) or for transfer over USB.
Closes: https://github.com/swaywm/wlroots/issues/1267
Unless we're dealing with a multi-GPU setup and the backend being
initialized is secondary, we don't need a renderer nor an allocator.
Stop initializing these.
This is the cause of the spurious "drmHandleEvent failed" messages
at exit. restore_drm_outputs calls handle_drm_event in a loop without
checking whether the FD is readable, so drmHandleEvent ends up with a
short read (0 bytes) and returns an error.
The loop's goal is to wait for all queued page-flip events to complete,
to allow drmModeSetCrtc calls to succeed without EBUSY. The
drmModeSetCrtc calls are supposed to restore whatever KMS state we were
started with. But it's not clear from my PoV that restoring the KMS
state on exit is desirable.
KMS clients are supposed to save and restore the (full) KMS state on VT
switch, but not on exit. Leaving our KMS state on exit avoids unnecessary
modesets and allows flicker-free transitions between clients. See [1]
for more details, and note that with Pekka we've concluded that a new
flag to reset some KMS props to their default value on compositor
start-up is the best way forward. As a side note, Weston doesn't restore
the CRTC by does disable the cursor plane on exit (see
drm_output_deinit_planes, I still think disabling the cursor plane
shouldn't be necessary on exit).
Additionally, restore_drm_outputs only a subset of the KMS state.
Gamma and other atomic properties aren't accounted for. If the previous
KMS client had some outputs disabled, restore_drm_outputs would restore
a garbage mode.
[1]: https://blog.ffwll.ch/2016/01/vt-switching-with-atomic-modeset.html
Right now callers of drm_crtc_commit need to check whether the
interface is legacy or atomic before passing the TEST_ONLY flag.
Additionally, the fallbacks for legacy are in-place in the common
code.
Add a test_only arg to the crtc_commit hook. This way, there's no
risk to pass atomic-only flags to the legacy function (add an assert
to ensure this) and all of the legacy-specific logic can be put back
into legacy.c (done in next commit).
Simon Ser
Alexander Orzechowski
Rose Hudson
illiliti
José Expósito
Simon Zeni
Chris Chamberlain
Ronan Pigott