When turning off a CRTC, we don't need a buffer.
It doesn't matter whether this is a modeset or not: we always need
a buffer even for regular page-flips as long as a connector is
active.
Fixes: 374daeb256 ("backend/drm: Ensure a primary fb is available when configuring an output")
We can never hit the case where we try to light up an output without
a buffer. output_ensure_buffer() will catch this for now, and when that's
removed, output_basic_test() will catch this case.
drm_connect_state_init() will set primary_fd to null if no CRTC is active
for the connector and can crash later if the code expects a CRTC (like
when lighting up an output).
On startup, we fetch the previous MODE_ID blob ID so that
compositors can keep using the previous mode if they want to.
However, that blob doesn't belong to us, it belongs to the
previous DRM master. As a result, we get an error when trying to
destroy it.
Fix this by tracking whether the blob belongs to us or not.
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3811
Stop trying to maintain a per-file _POSIX_C_SOURCE. Instead,
require POSIX.1-2008 globally. A lot of core source files depend
on that already.
Some care must be taken on a few select files where we need a bit
more than POSIX. Some files need XSI extensions (_XOPEN_SOURCE) and
some files need BSD extensions (_DEFAULT_SOURCE). In both cases,
these feature test macros imply _POSIX_C_SOURCE. Make sure to not
define both these macros and _POSIX_C_SOURCE explicitly to avoid
POSIX requirement conflicts (e.g. _POSIX_C_SOURCE says POSIX.1-2001
but _XOPEN_SOURCE says POSIX.1-2008).
Additionally, there is one special case in render/vulkan/vulkan.c.
That file needs major()/minor(), and these are system-specific.
On FreeBSD, _POSIX_C_SOURCE hides system-specific symbols so we need
to make sure it's not defined for this file. On Linux, we can
explicitly include <sys/sysmacros.h> and ensure that apart from
symbols defined there the file only uses POSIX toys.
If all connectors and planes already have the right CRTC set, or
are disabled, we can skip the device-wide reset after a VT switch.
I've contemplated using a more fine-grained logic to only reset
the connectors, CRTCs and planes that need to be migrated. However,
writing a correct algorithm for this would be quite involved, and it
doesn't seem worth the trouble anyways.
Closes: https://github.com/swaywm/sway/issues/7956
This function fetches property IDs. These don't change for the
lifetime of the connector. Instead of refreshing the property IDs
on hotplug (and leaving property IDs unset for disconnected
connectors), only fetch the property IDs when we create the
connector.
- Add POSIX 1993.09 compliance macro in source files that use
"struct timespec";
- Add POSIX 2001.12 compliance macro in source files that use
"struct sigaction" and the SA_SIGINFO macro, or the fchmod()
function;
- Add POSIX 2008.09 compliance macro in source files that use the
getline() function.
These compliance macros are enough for wlroots to compile with the
git-master version of uClibc-ng.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Since we only use the backend capabilities here we can simply pass
them in directly. This allows other locations to create an allocator
even if they don't have a backend. They can simply specify the caps
they want instead.
This makes it easy for compositors to handle situations where the
DRM or libinput backend becomes unavailable. Compositors can listen
the destroy event of the multi backend returned by
wlr_backend_autocreate() and decide what to do.
Some users might want to destroy the multi backend when a child
backend is being destroyed. However, they can't destroy the multi
backend if it's already in the process of being destroyed.
The destroy signal was changed to be emitted after destroying child
backends in babdd6ccf7 ("backend: fix use-after-free when destroying
backends"). However, this was done to accomodate for an old
"output_remove" event on backends, which has long been dropped in
favor of wlr_output.events.destroy.
This patch follows the same principle as 5d639394f3
("types/output: emit destroy event before destroying global").
wlr_output.refresh is populated by core wlr_output, and thus will
be zero for a custom mode with an unset refresh rate.
Save the refresh rate from the drmModeModeInfo in wlr_drm_connector
instead.
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3791
`gcc-14` added a new `-Wcalloc-transposed-args` warning recently. It
detected minor infelicity in `calloc()` API usage in `wlroots`:
../backend/libinput/tablet_pad.c: In function 'add_pad_group_from_libinput':
../backend/libinput/tablet_pad.c:36:38: error: 'calloc' sizes specified with 'sizeof' in the earlier argument and not in the later argument [-Werror=calloc-transposed-args]
36 | group->rings = calloc(sizeof(unsigned int), group->ring_count);
| ^~~~~~~~
../backend/libinput/tablet_pad.c:36:38: note: earlier argument should specify number of elements, later size of each element
It can be useful for compositors to get the real DRM FD instead of
the one from the parent compositor. For instance, some compositors
might want to perform some DRM IOCTLs there to check the driver
name, fetch some DRM resources, etc. This will also be a requirement
for direct scanout on secondary GPUs.
RMFB implicitly performs a modeset to turn off any CRTC which is
using the FB. This prevents seamless transitions between two DRM
masters from working.
Use the new CLOSEFB IOCTL which doesn't turn off anything and leave
it up to the compositor to turn off outputs on shutdown if it wants
to.
Under X11, ConfigureNotify means that the window has already been resized.
Sending ConfigureRequest with the received size is not only useless, but also
can confuse the window manager, which will probably reply with the current
(i.e. *old*) size causing a configure loop.
Fixes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3769
wl_display holds a lot more than wlr_session needs: wlr_session
only needs to wait for a FD to become readable, but wl_display
provides full access to the Wayland client and protocol objects.
Switch to wl_event_loop to better reflect the above.
Introduce a per-page-flip tracking struct passed to the kernel
when we request a page-flip event for an atomic commit. The kernel
will pass us back this pointer when delivering the event.
This eliminates any risk of mixing up events together. In particular,
if two events are pending, or if the CRTC of a connector is swapped,
we no longer blow up in the page-flip event handler.
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3753
since 4932e0d347f("backend/drm: ensure plane surfaces are cleaned up on shutdown")
at finish_drm_resources called drm_plane_finsh_surface has already free the fb
Signed-off-by: zhoulei zhoulei@kylinos.cn
Signed-off-by: sunzhguy <sunzhigang1@kylinos.cn>
Right now this is done "by chance" because we disable all CRTCs
on shutdown. However, we'll stop doing this. Plus, if disabling
a CRTC fails, we don't cleanup properly.
We can just assume CLOCK_MONOTONIC everywhere.
Simplifies the backend API, and fixes clock mismatches when multiple
backends are used together with different clocks.
We currently only perform non-blocking commits for non-modeset commits
with a buffer attached.
Perform non-blocking commits whenever there is no pending pageflip
event. If a non-blocking modeset commit fails, which can happen if the
driver implicitly added more CRTCs to the commit that we did not know we
had to wait for, retry with a blocking commit.
References: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/2239
The name "allow_artifacts" and associated description is very vague, and
theoretically allow for tearing behavior. Clarify that we only intend to
mean artifacts related to output configuration (e.g., modesets).
References: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3740
Since headless and wayland-without-presentation-feedback were firing
present inside their commit impls, present was getting fired before
commit, which is cursed. Defer this with an idle timer so that commit
handlers can run before present handlers.
DRM_MODE_PAGE_FLIP_ASYNC doesn't allow user-space to submit new
buffers before waiting for the uevent: the kernel will return EBUSY
in that case.
Fixes: c2aa7fd965 ("backend/drm: Add async page flip support to legacy")
Since e5fc8cd4c7 ("output: trigger frame/present events on all
commits on enabled output"), any commit on an enabled output is
supposed to trigger frame/present events.
The DRM backend was skipping the commit completely for no-op
commits. Stop doing so.
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3719
Up until now, frame/present events were only triggered when the
user submitted a buffer. Change the wlr_output API so that these
events are triggered when any commit is applied on an enabled
output.
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3708
When integrating wlroots with another toolkit, wlroots may receive
wl_pointer.enter events for surfaces not backed by a wlr_output.
Ignore such surfaces by tagging the ones we're aware of with
wl_proxy_set_tag().
We were only restoring fixed modes here. The DRM backend no longer
creates fixed modes when the compositor sets a custom mode, so we
need to handle this situation when restoring.
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3698
A no-op commit should not schedule a new frame. This aligns the
headless backend with the rest of the backends.
This will be important to handle the enabled → disabled transition.
This changes the semantics of wlr_output_state. Instead of having
fields with uninitialized memory when missing from the committed
bitflag, all fields are always initialized (and maybe NULL/empty),
just like we do in wlr_surface_state. This reduces the chances of
footguns when reading a field, and removes the need to check for
the committed bitfield everywhere.
A new wlr_output_state_init() function takes care of initializing
the Pixman region.
The kernel complains when the damage exceeds the FB bounds:
[73850.448326] i915 0000:00:02.0: [drm:drm_atomic_check_only] [PLANE:31:plane 1A] invalid damage clip 0 0 2147483647 2147483647
Make the DRM backend behave like the Wayland one and allow compositors
to damage (0, 0, INT32_MAX, INT32_MAX) to repaint everything without
needing to know the exact buffer size.
Closes: https://github.com/swaywm/sway/issues/7632
Based on five calls:
wlr_render_timer_create - creates a timer which can be reused across
frames on the same renderer
wlr_renderer_begin_buffer_pass - now takes a timer so that backends can
record when the rendering starts and finishes
wlr_render_timer_get_time - should be called as late as possible so that
queries can make their way back from the GPU
wlr_render_timer_destroy - self-explanatory
The timer is exposed as an opaque `struct wlr_render_timer` so that
backends can store whatever they want in there.
Commit 90d08f8f1c changed the way
wlr_drm_format_intersect worked, including passing in a destination
format list. This breaks scenarios where the intersection doesn't
find any matching formats, since we still have a valid destination
format set. This changes it to only return true if more than one
matching format is present in the intersection list.
In the logic of the DRM backend in backend_destroy, wlr_backend_finish
is called first, then the outputs are destroyed and then the
display->destroy.link is removed from the list.
This commit applies the same order to the headless backend.
Add a src_box state field. Use the SRC_* KMS props in the DRM
backend, reject the layers in the Wayland backend (for now, we can
support it later via viewporter).
This allows callers to set a destination size different from the
buffer size to scale them.
The DRM backend supports this. The Wayland backend doesn't yet
(we'd need to wire up viewporter).
since wayland doesn't provide a touch id in cancel events, track what
points are active so we can cancel all of them
timestamp is also not provided - use 0 because no one's paying attention
to that anyway
Closes#3000
- Simplifies the backends
- Avoids having two ways to do the same thing: previously one could
disable a layer by either omitting it from wlr_output_state.layers,
or by passing a NULL buffer
- We can change our mind in the future: we can allow users to omit
some layers and define a meaning without breaking the API.
References: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/4017#note_1783997
Instead of littering #ifdefs everywhere, move them to the dedicated
attempt_XXX_backend() functions. This makes the logic in
wlr_backend_autocreate() more readable, and provides better error
messages when the X11/Wayland backends are disabled at compile-time,
or when WLR_BACKENDS contains a backend disabled at compile-time.
When we change the required dependencies for the DRM backend,
Meson might auto-disable the backend for users missing the new
requirements. This results in confused users [1] because they don't
notice the "drm-backend: NO" line burried in the Meson logs, and
then get a black screen when starting the compositor.
Update wlr_backend_autocreate() to refuse to create a backend with
only libinput (without DRM).
Users really wanting to start their compositor with a libinput
backend and without a DRM backend can manually set WLR_BACKENDS.
[1]: https://github.com/swaywm/sway/issues/7457
We've had this struct for a while. It'd be useful for compositors
if they want to manage the swap chains themselves instead of being
forced to use wlr_output's. Some compositors might also want to use
a swapchain without an output.
Simon Ser
Alexander Orzechowski
Kenny Levinsen
Paul Cercueil
Austin Shafer
Kirill Primak
Sergei Trofimovich
sunzhguy
JiDe Zhang
Rose Hudson
vaxerski
Brett Ernst
Clayton Craft
Tobias Predel
zhoulei
ptrcnull