Improves upon 18e425ed by using the first assigned workspace instead of
the last one. The order isn't explicitly guaranteed to be the same as in
the config, but in general works.
Fixes#2490.
To be honest I'm not sure why this fixes the issue.
I observed that I could only make the view jump if I resized it to the
smallest possible size first. Then I had a suspicion that we were
accidentally factoring in the title and border sizes into the view size
when it uses CSD. So I changed that and it appears to have fixed the
jumping issue.
I guess when we factor the title and borders in, we send a configure to
the surface with a size smaller than the minimum, and it comes back with
a surface at the minimum size. We interpret this as an unexpected
resize, and this somehow makes it jump.
Previously we used a reparent event to detect when a view changes
parent, then sent an output enter/leave to the surfaces if needed. This
worked for tiling views but not floating views, as floating views can
intersect another output without changing parent.
The solution implemented for floating views also applies cleanly to
tiling views, so the previous method has been completely replaced and
the reparent event has been removed.
This introduces a new function container_discover_outputs. This function
compares the container's `current` position to the outputs, sends enter
and leave events as needed, and keeps track of which outputs it's
intersecting in a new `container->outputs` list. If it has entered a new
output with a different scale then the title and marks textures will
also be recreated at the new scale.
The function is called when a transaction applies. This is convenient as
it means we don't have to call it from various places.
There is imperfect rendering when a floating view overlaps two outputs
with different scales. It renders correctly for the most recently
entered output, but there is only one title texture so it renders
incorrectly on the old output.
Fixes#2482
We were removing the saved buffer when one transaction applies, then
didn't have a new buffer to save when the next transaction ran. This
made the rendering code crash as it had no surface to use.
This commit makes it continue to hold the buffer if the view is
destroying and has more transactions. Additionally, a check is added
when saving the buffer to make sure there's no one already there.
Workspaces previously had a magical `workspace->floating` container,
which had a layout of L_FLOATING and whose children were actual floating
views. This allowed some conveniences, but was a hacky solution because
the container has to be exempt from focus, coordinate transactions with
the workspace, and omit emitting IPC events (which we didn't do).
This commit changes it to be a list directly in the sway_workspace. The
L_FLOATING layout is no longer used so this has been removed as well.
* Fixes incorrect check in the swap command (it checked if the
containers had the L_FLOATING layout, but this layout applied to the
magical container).
* Introduces workspace_add_floating
This makes all debug options stored in a single struct rather than in
various places, changes/fixes the behaviour of existing options, and
introduces some new options.
* Fixes damage issues with `-Drender-tree` texture (by removing scissor)
* Offsets the render tree overlay's `y` position for those who have
swaybar at the top
* Replaces `-Ddamage=rerender` with `-Dnodamage`
* Replaces `-Ddamage=highlight` with `-Dhighlight-damage`
* Replaces `-Dtxn-debug` with `-Dtxn-wait`
* Introduces `-Dnoatomic`
* Removes the `create_time` and `ms_arranging` figures from transactions
and the log message. Transactions are created after arranging and the
create time is of no significance.
* Fixes `-Dtxn-debug` (now `-Dtxn-wait`) not working.
This introduces the following `for_each` functions:
* root_for_each_workspace
* root_for_each_container
* output_for_each_workspace
* output_for_each_container
* workspace_for_each_container
And introduces the following `find` functions:
* root_find_output
* root_find_workspace
* root_find_container
* output_find_workspace
* output_find_container
* workspace_find_container
* container_find_child
And removes the following functions:
* container_descendants
* container_for_each_descendant
* container_find
This change is preparing the way for demoting sway_container. Eventually
these functions will accept and return sway_outputs, sway_workspaces and
sway_containers (meaning a C_CONTAINER or C_VIEW).
This change also makes it easy to handle abnormalities like the
workspace floating list, root's scratchpad list and (once implemented)
root's saved workspaces list for when there's no connected outputs.
This commit renames container_sort_workspaces to output_sort_workspaces
and moves it to output.c.
This also renames container_wrap_children to workspace_wrap_children and
moves it to workspace.c. This function is only called with workspaces.
This fixes a race condition flicker when unfloating a view which uses
client side decorations.
When the view is floated it has using_csd = true, so the decorations are
not drawn. When unfloating it it changes to false, but this change
wasn't part of transactions so it could potentially render the
decorations around the view while it's waiting for the transaction to
apply.
Fixes#2467.
This commit introduces seat_get_focus_inactive_floating to supplement
seat_get_focus_inactive_tiling, and uses it during `focus mode_toggle`
which fixes a focus bug.
This also refactors the seat_get_focus_inactive functions so that they
do their selection logic themselves rather than offloading it to
seat_get_focus_by_type which was getting bloated. seat_get_focus_by_type
is now removed.
Lastly, this commit changes seat_get_focus to just return the first
container in the focus stack rather than looping and calling
seat_get_focus_by_type.
The original purpose of this commit is to replace some for loops with
list_find. But while doing this I found the workspace_prev_next_impl
functions to be difficult to read and also contained a bug, so I
refactored them and fixed the bug.
To reproduce the bug:
* Have two outputs, where the left output has workspaces 1, 2, 3 and the
right output has workspaces 4, 5, 6. Make workspace 2 focused_inactive
and workspace 4 focused.
* Run `workspace prev`.
* Previously it would visit the left output, then apply `workspace prev`
to workspace 2, which focuses workspace 1.
* Now it will focus the rightmost workspace on the left output
(workspace 3).
The refactoring I made to the workspace functions are:
* Added the static keyword.
* They now accept an int dir rather than bool, to avoid an unnecessary
conversion.
* Rather than preparing start and end variables for the purpose of
iterating, just iterate everything.
* Replace for loops with list_find.
* Don't call workspace_output_prev_next_impl (this fixes the bug).
Commit 4b8e3a885b makes it so only one
transaction is committed (ie. configures sent) at a time. This commit
removes the now-unnecessary code which was used to support concurrent
committed transactions.
* Instead of containers storing a list of instructions which they've
been sent, it now stores a single instruction.
* Containers now have an ntxnrefs property. Previously we knew how many
references there were by the length of the instruction list.
* Instructions no longer need a ready property. It was used to avoid
marking an instruction ready twice when they were in a list, but this is
now avoided because there is only one instruction and we nullify the
container->instruction pointer when it's ready.
* When a transaction applies, we no longer need to consider releasing
and resaving the surface, as we know there are no other committed
transactions.
* transaction_notify_view_ready has been renamed to
view_notify_view_ready_by_serial to make it consistent with
transaction_notify_view_ready_by_size.
* Out-of-memory checks have been added when creating transactions and
instructions.
This fixes an issue where views might commit to a transaction ahead of
the first one, and applying the first transaction causes us to save a
buffer of the wrong size.
There was a separate function dispatch_cursor_button_floating which
dealt with the resize and move operations, but as resize is not really
limited to floating views, it doesn't make as much sense to have this
separate. So both functions are now combined into one.
Additionally, dispatch_cursor_button now uses a pattern of returning
early instead of using else-ifs.
* The OP_RESIZE seat operation has been renamed to OP_RESIZE_FLOATING,
and OP_RESIZE_TILING has been introduced.
* Similar to the above, seat_begin_resize and handle_resize_motion have
been renamed and tiling variants introduced.
* resize.c's resize_tiled has to be used, so container_resize_tiled has
been introduced in resize.c to allow external code to call it.
This allows for a color to be set when the wallpaper does not fill the
entire output. If specified, the fallback color is also used when the
image path is inaccessible.
Rationale: Sticky containers are always assigned to the visible
workspace.
The basic idea here is to check the destination's output (move.c:190).
But if the command was `move container to workspace x` then a workspace
might have been created for it. We could destroy the workspace in this
case, but that results in unnecessary IPC events.
To avoid this, the logic for `move container to workspace x` has been
adjusted. It now delays creating the workspace until the end, and uses
`workspace_get_initial_output` to determine and check the output before
creating it.
* Removes container_floating_move_to_container, instead opting to put
that logic in container_move_to
* In the seat code, focusing a floating view now updates the pending
state only and lets the next transaction carry it over to the current
state. This is required, otherwise it would crash.
* When unfullscreening a floating container, an output check is now done
to see if it should center it.
In a multi-output setup, if a sticky container is on one output and
focus is on the other output, and you run (eg) `workspace 1` to focus
the workspace containing the sticky container, an infinite loop would
occur. It would loop infinitely because it would remove the sticky
container from the workspace, add it back to the same workspace, and
then decrement the iterator variable.
The fix just wraps the loop in a workspace comparison.
The back_and_forth condition is intended to be handled in the else-if
block, but this was never reached because it remained in the first
block's conditions.
container_move_to handled moving containers to new parents, as well as
moving workspaces to new outputs.
This commit removes the workspace-moving code from this function and
introduces workspace_move_to_output. Moving workspaces using
container_move_to only happened from the move command, so it's been
implemented as a static function in that file.
Simplifying container_move_to makes it easier for me to fix some issues
in #2420.
minus
Ian Fan
Ryan Dwyer
Drew DeVault
emersion
Ryan Dwyer
Donnie West
Josip Janzic
Brian Ashworth
Brian Ashworth