This fixes the behavior of `__focused__` when there is no focused view
to match i3's behavior of successfully matching no views instead of
returning an error of a missing value. It also applies the same logic
when a token is not applicable (or unset) for a view such as `app_id`
for a focused xwayland view or `class` for a focused xdg-shell view.
This adds an `autofail` boolean to `struct criteria`. If it is set to
`true`, then `criteria_matches_view` will immediately bail out as a
no match. If `autofail` is set, the criteria will also not be
considered empty by `criteria_is_empty`.
To set this new `autofail` property, `get_focused_prop` will now take
in a boolean pointer of the same name. If `__focused__` is supported
for the token and there is no focused view or the focused view does not
have a value for the token, then the boolean will be set to true. In
`parse_token`, the boolean value will be checked and if set to true,
then `criteria->autofail` will be set to true and `parse_token` will
bail successfully. Tokens will still be parsed to make sure the whole
criteria is syntactically valid, which is also why
`&criteria->autofail` is not passed to `get_focused_prop` and a local
boolean is declared in `parse_token`.
This commit adds support for laptop lid and tablet
mode switches as provided by evdev/libinput and
handled by wlroots.
Adds a new bindswitch command with syntax:
bindswitch <switch>:<state> <command>
Where <switch> is one of:
tablet for WLR_SWITCH_TYPE_TABLET_MODE
lid for WLR_SWITCH_TYPE_LID
<state> is one of:
on for WLR_SWITCH_STATE_ON
off for WLR_SWITCH_STATE_OFF
toggle for WLR_SWITCH_STATE_TOGGLE
(Note that WLR_SWITCH_STATE_TOGGLE doesn't map to
libinput and will trigger at both on and off events)
This introduces a `default` seat operation which is used when no mouse
buttons are being held. This means there is now always a seat operation
in progress. It allows us to separate `default` code from the standard
cursor management code.
The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and
`end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are
only used by the default seatop. `end` is called when a seatop is being
replaced by another one and allows the seatop to free any resources,
though no seatop currently needs to do this. `finish` is no longer
required, as each seatop can gracefully finish in their `button`
callback. And `abort` is not needed, as calling `end` would achieve the
same thing. The struct has also gained a bool named allow_set_cursor
which allows the client to set a new cursor during `default` and `down`
seatops.
Seatops would previously store which button they were started with and
stop when that button was released. This behaviour is changed so that it
only ends once all buttons are released. So you can start a drag with
$mod+left, then click and hold right, release left and it'll continue
dragging while the right button is held.
The motion callback now accepts dx and dy. Most seatops don't use this
as they store the cursor position when the seatop is started and compare
it with the current cursor position. This approach doesn't make sense
for the default seatop though, hence why dx and dy are needed.
The pressed_buttons array has been moved from the sway_cursor struct to
the default seatop's data. This is only used for the default seatop to
check bindings. The total pressed button count remains in the
sway_cursor struct though, because all the other seatops check it to
know if they should end.
The `down` seatop no longer has a `moved` property. This was used to
track if the cursor moved and to recheck focus_follows_mouse, but seems
to work without it.
The logic for focus_follows_mouse has been refactored. As part of this
I've removed the call to wlr_seat_keyboard_has_grab as we don't appear
to use keyboard grabs.
The functions for handling relative motion, absolute motion and tool
axis have been changed. Previously the handler functions were
handle_cursor_motion, handle_cursor_motion_absolute and
handle_tool_axis. The latter two both called cursor_motion_absolute.
Both handle_cursor_motion and cursor_motion_absolute did very similar
things. These are now simplified into three handlers and a single common
function called cursor_motion. All three handlers call cursor_motion. As
cursor_motion works with relative distances, the absolute and tool axis
handlers convert them to relative first.
This removes `output_find_config`, which would take the first matching
output config it found. This is fine if only a name output config,
identifier output config, or even just wildcard exist, but if there is
a name output config and identifier output config, they are not merged.
Instead, this introduces find_output_config, which is just a wrapper
for `get_output_config`. This ensures that both the name and identifier
output configs are respected.
This fixes the following case:
- For simplicity in this example, remove all output configs from config
- Run `swaymsg output <name> bg #ff0000 solid_color`
- Run `swaymsg output <identifier> scale 2`
- Disconnect and reconnect output
Without this, the output will have the background, but not the scale.
With this, the output will have both the background and scale
It turns out sending button events during all seat operations is not
desirable. This patch introduces a new property
`seatop_impl.allows_events` which allows each operation to define
whether button events should be passed to the surface or not.
The `down` seat operation is the only one that supports this. As all the
other seatops don't support it, the calls to seat_pointer_notify_button
prior to starting them have been removed.
Since not all child views's have an unmap event, it is possible for it
to still be mapped (default state) in the destruction handler. When
the destruction handler is called, the corresponding view may have
already been freed and the memory location reallocated. This adds a
listener for the view unmapping and removes the mapped status. This
ensures that the child view is damaged due to destruction while the
view still exists and not after.
This changes the way zero (which is the default) is interpreted for both
the width and height of `floating_maximum_size`. It now refers to the
width and height of the entire output layout, which matches i3's
behavior.
This also removes duplicated code to calculate the floating constraints
in three files. Before this, `container_init_floating` used two-thirds
of the workspace width/height as the max and the entire workspace
width/height was used everywhere else. Now, all callers use a single
function `floating_calculate_constraints`.
All seat operations except "down" eat the button pressed event and don't send
it to clients. Thus, when ending such seat operations we shouldn't send the
button released event.
This commit moves the logic used to send pressed/released into the "down"
operation.
Enables i3-compatible behavior regarding hiding the title bar on tabbed and
stacked containers with one child.
Related issues and merge requests: #3031, #3002, #2912, #2987.
This fixes the issue of the display freezing on reload with
wlroots#1545.
On master, all output configs are applied on reload. This may cause an
output to have its config applied up to three times, instead of just
once. The three cases are: output name, output identifier, and wildcard.
Not only is this inefficient, but it can cause swaybg to be spawned and
immediately killed.
However, swaybg requires two roundtrips of wl_display (to obtain needed
globals) before it enters its normal event loop. Modesetting will
roundtrip the wl_display. Without modesetting, waitpid for killing
swaybg could block infinitely due to swaybg being blocked by
wl_display_roundtrip.
This only configured an output once. It either uses the wildcard config
or creates an empty wildcard config and applies that. This also fixes a
bug where an output would not be reset when there is no output config to
apply to it.
If a seat does not exist in seat_cmd_cursor, do not create it. A seat
without any attachments is useless since it will have no capabilities.
This changes `input_manager_get_seat` to have an additional argument
that dictates whether or not to create the seat if it does not exist.
This changes the `pointer_constraint` command to be a subcommand of seat
to allow for per-seat settings. The current implementation that is not a
seat subcommand will only operate on the current seat and will segfault
in the config due to `config->handler_context.seat` only being set at
runtime.
This also allows for the wildcard identifier to be used to alter the
pointer constraint settings on all seats and allows for the setting to
be merged with the rest of the seat config.
This cleans up the log when sway fails to read a config file. The
following changes have been made:
- A missing error message has been added to the log when the config file
is a directory instead of a regular file
- In main, `goto` statements have been added after the `sway_terminate`
calls instead of wrapping every block in `if (!terminate_request)`
- Unnecessary NULL-checks around calls to free in `main` have been
removed
- Deferred command execution has been extracted to a separate function
and the `Running deferred commands` log message will not be shown when
there are no deferred commands.
Just a convenience function that improves readability of the code.
Other things worth noting:
* container_get_siblings and container_sibling_index no longer use the
const keyword
* container_handle_fullscreen_reparent is only ever called after
attaching the container to a workspace, so its con->workspace check has
been changed to an assertion
The goal here is to center fullscreen views when they are both too small
for the output and refuse to resize to the output's dimensions. It has
the side effect of also centering the view when it's too small for its
container.
Example clients that have this behaviour are emersion's hello-wayland
and weston.
It works by introducing surface_{x,y,width,height} properties to the
container struct. The x and y represent layout-local coordinates where
the surface will be rendered. The width and height are only used to
track the surface's previous dimensions so we can detect when the client
has resized it and recenter and apply damage accordingly.
The new surface properties are calculated when a transaction is applied,
as well as when a view resizes itself unexpectedly. The latter is done
in view_update_size. This function was previously restricted to views
which are floating, but can now be called for any views.
For views which refuse to resize *smaller* than a particular size, such
as gnome-calculator, the surface is still anchored to the top left as
per the current behaviour.
Modifier handling functions were moved into sway/input/keyboard.c;
opposite_direction for enum wlr_direction into sway/tree/output.c;
and get_parent_pid into sway/tree/root.c .
This commit mostly duplicates the wlr_log functions, although
with a sway_* prefix. (This is very similar to PR #2009.)
However, the logging function no longer needs to be replaceable,
so sway_log_init's second argument is used to set the exit
callback for sway_abort.
wlr_log_init is still invoked in sway/main.c
This commit makes it easier to remove the wlroots dependency for
the helper programs swaymsg, swaybg, swaybar, and swaynag.
This happens if you plug in more outputs than supported by your GPU.
This patch makes it so outputs without CRTCs appear as disabled. As soon as
they get a CRTC (signalled via the mode event), we can enable them.
This modifies `bar_cmd_tray_bindsym` to use `get_mouse_bindsym` for
parsing mouse buttons. This also introduces `bar_cmd_tray_bindcode`,
which will use `get_mouse_bindcode` for parsing mouse buttons. Like with
sway bindings, the two commands are encapsulated in a single file to
maximize shared code.
This also modifies tray bindings to work off of events codes rather than
x11 buttons, which allows for any mouse buttons to be used.
For `get_bar_config`, `event_code` has been added to the `tray_bindings`
section and will include to event code for the button. If the event code
can be mapped to a x11 button, `input_code` will still be the x11 button
number. Otherwise, `input_code` will be `0`.
For example, create layout V[view view view] and resize the leftmost
view using mod+rightclick. Previously, the edge between view 2 and 3
would be adjusted as well. Now this edge will remain constant, which
matches the behaviour of i3.
To do this operation correctly, the resize tiling seatop now keeps track
of two containers, as the container that resizes horizontally will be a
different container to the one which resizes vertically (one will be an
ancestor). The tiling resize seatop now figures out these containers
during the start of the operation and keeps references to them in the
event. A new function container_find_resize_parent has been introduced
to do this. This function is also used by the resize command.
During cursor motion, the seatop logic is similar to before, but now has
to choose the correct container to resize.
In resize.c, container_resize_tiled and resize_tiled have been merged
into one. One of them originally did nothing except pass the values
through to the other.
container_resize_tiled now takes a simplified approach where it just
finds the immediate siblings on either side and resizes them without
worrying about the others. The parellel_coord and parallel_size
functions are no longer needed and have been removed.
Brian Ashworth
Ryan Walklin
Ryan Dwyer
emersion
Ian Fan
Milkey Mouse
db
Connor E
Drew DeVault
v44r
absrd
Las
Jan Beich
M Stoeckl