This change adds support for renaming a workspace when `exec` command
is being processed by keeping sway_workspace and pid_workspace names in
sync.
The change can be verified by running following command:
swaymsg exec <application>; swaymsg rename workspace number 1 to 5
Fixes: #3952
Since the NOOP output has no size, the minimum floating size is greater
than the workspace size for the NOOP output. In this case, the floater
gets centered in the output instead of the workspace. However, the
NOOP output is not part of the output layout and thus has a NULL box.
Attempting to access the properties of this box was causing a segfault.
This fixes the issue by just setting the floater's box to all zeroes
when mapping on the NOOP output. When the workspace gets moved from the
NOOP output to a new output, any floater whose width or height is zero
or has an x or y location outside of the output, gets passed to
`container_init_floating` again. This will then set the appropriate
size and centering. For any floater that has a valid size and location,
they are preserved.
This removes `output_find_config`, which would take the first matching
output config it found. This is fine if only a name output config,
identifier output config, or even just wildcard exist, but if there is
a name output config and identifier output config, they are not merged.
Instead, this introduces find_output_config, which is just a wrapper
for `get_output_config`. This ensures that both the name and identifier
output configs are respected.
This fixes the following case:
- For simplicity in this example, remove all output configs from config
- Run `swaymsg output <name> bg #ff0000 solid_color`
- Run `swaymsg output <identifier> scale 2`
- Disconnect and reconnect output
Without this, the output will have the background, but not the scale.
With this, the output will have both the background and scale
This moves setting `seat->prev_workspace_name` from `workspace_switch`
to `set_workspace`. `workspace_switch` is only called when using a
`workspace` command to change the workspace so any workspace change
based on criteria was not altering `seat->prev_workspace_name`. By
moving it to `set_workspace`, which is called by `seat_set_focus`, it
will change any time focus changes to a node on a different workspace
Since not all child views's have an unmap event, it is possible for it
to still be mapped (default state) in the destruction handler. When
the destruction handler is called, the corresponding view may have
already been freed and the memory location reallocated. This adds a
listener for the view unmapping and removes the mapped status. This
ensures that the child view is damaged due to destruction while the
view still exists and not after.
If a container gets mapped as fullscreen and set to floating by
criteria, the size and location are never set for the floating
container. This adds a check in container_fullscreen_disable for a
width or height of 0 and calls container_init_floating
This changes `apply_tabbed_layout` and `apply_stacked_layout` to use
`int` instead of `size_t`. This is necessary for tabbed and stacked
containers to be positioned correctly when the y-location is negative.
The reasoning for this is signed plus unsigned is always an unsigned
value. This was causing the y-location of the container to be
positioned near `INT_MIN` due to an unsigned integer underflow
This changes the way zero (which is the default) is interpreted for both
the width and height of `floating_maximum_size`. It now refers to the
width and height of the entire output layout, which matches i3's
behavior.
This also removes duplicated code to calculate the floating constraints
in three files. Before this, `container_init_floating` used two-thirds
of the workspace width/height as the max and the entire workspace
width/height was used everywhere else. Now, all callers use a single
function `floating_calculate_constraints`.
Enables i3-compatible behavior regarding hiding the title bar on tabbed and
stacked containers with one child.
Related issues and merge requests: #3031, #3002, #2912, #2987.
container_floating_move_to_center and container_fullscreen_disable were
calling recursively when the container spawned as a fullscreen floating
container (via for_window). Such a window now doesn't crash sway anymore
but is still configured with a wrong, zero size, making it not directly
usable.
This modifies the places where output_get_active_workspace is called to
handle a NULL result. Some places already handled it and did not need a
change, some just have guard off code blocks, others return errors, and
some have sway_asserts since the case should never happen. A lot of this
is probably just safety precautions since they probably will never be
called when `output_get_active_workspace` is not fully configured with a
workspace.
This calls `workspace_consider_destroy` on the workspace that was
visible on an output that a workspace was just evacuated to. This
prevents having hidden empty workspaces.
This changes `workspace_next_name` to use the next available number as
the workspace name instead of the number of outputs. This fixes the case
where a number that is already in use could be returned. The workspace
numbers in use have no relation to the number of outputs so it makes
more sense to use the lowest available number
This allows the focused inactive tree node and visible workspaces to be
changed while a surface layer has focus. The layer temporarily loses
focus, the tree focus changes, and the layer gets refocused.
It is possible for `wlr_surface_is_subsurface` to return true, but
`wlr_surface_from_wlr_surface` to be NULL. This adds a NULL check to the
value returned by `wlr_surface_from_wlr_surface` and breaks out of the
while loop in `subsurface_get_root_coords`.
When a layer surface is focused, `seat_get_focused_workspace` will be
NULL. This changes `workspace_get_initial_output` to use output of the
focus inactive. If the focus inactive is also NULL, then either the
first output or the noop output will be used as fallbacks.
It is possible to make the title bars have a zero pixel height while
stacked, by using a blank font and no padding. This causes a division by
zero when attempting to calculate the child index in
container_at_stacked, which then results in a segfault when attempting
to access the child at that bad index (INT_MIN). This just skips the
check to see if the cursor is over a title bar of a child of a stacked
container when the title bar height is zero since there will be no title
bars.
Don't access xdg_surface->toplevel if xdg_surface->role is equal to
WLR_XDG_SURFACE_ROLE_NONE, since this could lead to crash. The same
checks are added for xdg_surface_v6.
Fixes#3311
Just a convenience function that improves readability of the code.
Other things worth noting:
* container_get_siblings and container_sibling_index no longer use the
const keyword
* container_handle_fullscreen_reparent is only ever called after
attaching the container to a workspace, so its con->workspace check has
been changed to an assertion
The goal here is to center fullscreen views when they are both too small
for the output and refuse to resize to the output's dimensions. It has
the side effect of also centering the view when it's too small for its
container.
Example clients that have this behaviour are emersion's hello-wayland
and weston.
It works by introducing surface_{x,y,width,height} properties to the
container struct. The x and y represent layout-local coordinates where
the surface will be rendered. The width and height are only used to
track the surface's previous dimensions so we can detect when the client
has resized it and recenter and apply damage accordingly.
The new surface properties are calculated when a transaction is applied,
as well as when a view resizes itself unexpectedly. The latter is done
in view_update_size. This function was previously restricted to views
which are floating, but can now be called for any views.
For views which refuse to resize *smaller* than a particular size, such
as gnome-calculator, the surface is still anchored to the top left as
per the current behaviour.
In addition to removing unused code, two minor problems are fixed:
(1) `resize set` and `resize adjust` did not error when given
too many arguments.
(2) `orientation` was incorrectly overridden to be 'U' for
scroll events in the swaybar tray `handle_click` function.
This removes the call to `root_scratchpad_show` from
`root_scratchpad_remove_container` and places it in the
`cmd_move_container`. This also moved the IPC `window::move` event to
`cmd_scratchpad`.
Modifier handling functions were moved into sway/input/keyboard.c;
opposite_direction for enum wlr_direction into sway/tree/output.c;
and get_parent_pid into sway/tree/root.c .
This commit mostly duplicates the wlr_log functions, although
with a sway_* prefix. (This is very similar to PR #2009.)
However, the logging function no longer needs to be replaceable,
so sway_log_init's second argument is used to set the exit
callback for sway_abort.
wlr_log_init is still invoked in sway/main.c
This commit makes it easier to remove the wlroots dependency for
the helper programs swaymsg, swaybg, swaybar, and swaynag.
This happens if you plug in more outputs than supported by your GPU.
This patch makes it so outputs without CRTCs appear as disabled. As soon as
they get a CRTC (signalled via the mode event), we can enable them.
This fixes the handling of hidden scratchpad containers for some
commands. For the most part, this just prevents running the commands on
hidden scratchpad containers, but there are some commands that have some
special handling for them.
This splits each seat operation (drag/move tiling/floating etc) into a
separate file and introduces a struct sway_seatop_impl to abstract the
operation.
The move_tiling_threshold operation has been merged into move_tiling.
The main logic for each operation is untouched aside from variable
renames.
The following previously-static functions have been made public:
* node_at_coords
* container_raise_floating
* render_rect
* premultiply_alpha
* scale_box
This fixes two causes of segfaulting when an output is destroyed.
The first occurred when an output was never enabled. The issue was that
the destroy signal was never initialized so when it was emitted, sway
segfaulted. This was fixed by moving the initialization into
`output_create` since all outputs, regardless of whether they have ever
been enabled, will be destroyed at some point.
The second occurred when the cursor was on an output that was being
destroyed. The sway output would have already been removed, but if there
are other outputs, a cursor rebase would still occur. Since the
wlr_output still existed and the sway output was destroyed, the cursor
could be over nothing, resulting in a segfault when trying to get the
sway output, which was destroyed.
Unhide the cursor if container warping is enabled.
Also set the image_surface to NULL during view_unmap, otherwise the cursor will
try to access the surface which is currently being unmapped.
To reproduce:
* Launch two terminals in a workspace
* `focus parent` to select both terminals
* `move scratchpad`
* `scratchpad show` to show the terminals
* `scratchpad show` to hide the terminals
* `scratchpad show` - crash
When hiding the terminals, it should be moving focus to whatever is in
the workspace, but this wasn't happening because the focus check didn't
consider split containers. So the terminals were hidden in the
scratchpad while still having focus. This confused the next invocation
of scratchpad show, causing it to attempt to hide them instead of show
them, and the hide-related code caused a crash when it tried to arrange
the workspace which was NULL.
This patch corrects the focus check.
This combines `output_by_name` and `output_by_identifier` into a single
function called `output_by_name_or_id`. This allows for output
identifiers to be used in all commands, simplifies the logic of the
callers, and is more efficient since worst case is a single pass through
the output list.
Moves the call to `terminate_swaybg` from inside `apply_output_config` to
`output_disable`. The former was only called when an output was being
disabled. The latter is called when an output is being disabled and when
an output becomes disconnected. Without this, disconnecting an enabled
output would result in a defunct swaybg process.
This allows for output identifiers and to be used in the `workspace
<workspace> output <outputs...>` command. Previously, only output names
would be allowed. If an output identifier was given, it would never match
an output. This also allows for the wildcard character (`*`) to be
specified, which can be used to generate a list of workspace names that
should be used when generating new workspaces
This patch moves view_execute_criteria(view) below the fullscreen code.
Previously, if a view requested to be started in fullscreen, this was
done after execution of criteria and hence it was impossible to disable
fullscreen via criteria.
Fixes#3285
Since the output config is no longer applied before creating the default
workspace, the layout for default workspaces on an output may not be
correct. Due to the ordering of calls in output_enable being changed in
several bug fix PRs, this just fixes the layout after the call to
apply_output_config.
When adding a container to the scratchpad, it was possible for focus to
be removed from the seat. This occurred when a single child was moved
from it's parent to the scratchpad due to the focus_inactive for the
parent being NULL. If the focus_inactive for the parent is NULL, the
focus_inactive for the workspace should be focused.
This matches i3's behavior of returning a list of results that contain
the result of each command that was executed. Additionally, the
`parse_error` attribute has been added to the IPC JSON reply.
Damage subsurfaces when they are destroyed. Since subsurfaces don't have an
unmap event we need to do that on destroy.
We also don't want to keep a sway_view_child when the wlr_subsurface has been
destroyed.
Fixes https://github.com/swaywm/sway/issues/3197
This patch allows IPC clients to receive window::move events
when containers are moved to scratchpad or when hidden containers
are shown via "scratchpad show" command.
This commit fixes two bugs.
First, commit [1] has inverted the condition when we escape pango markup. We
need to escape client-provided strings when markup is enabled.
Second, parse_title_format has a shortcut when title_format is set to `%title`,
and escape_pango_markup wasn't used anymore there.
Fixes https://github.com/swaywm/sway/issues/3181
[1]: caee2dff03
The support for pango_markup was broken in title_format because the
formated title was escaped. I think only the payload should be escaped.
This commit fixes 789a877b37
This renames/moves the following properties:
* sway_view.{x,y,width,height} ->
sway_container.content_{x,y,width,height}
* This is required to support placeholder containers as they don't
have a view.
* sway_container_state.view_{x,y,width,height} ->
sway_container_state.content_{x,y,width,height}
* To remain consistent with the above.
* sway_container_state.con_{x,y,width,height} ->
sway_container_state.{x,y,width,height}
* The con prefix was there to give it contrast from the view
properties, and is no longer useful.
The function container_set_geometry_from_floating_view has also been
renamed to container_set_geometry_from_content.
`i3 4.16` allows users to list multiple outputs for a workspace and the
first available will be used. The syntax is as follows:
`workspace <workspace> output <outputs...>`
Additionally when the workspace is created, the outputs get added to the
output priority list in the order specified. This ensures that if a higher
output gets connected, the workspace will move to the higher output. This
works the same way as if the user had a workspace on an output, disconnected
the output, and then later reconnected the output.
This introduces the following command extensions from `i3-gaps`:
* `gaps horizontal|vertical|top|right|bottom|left <amount>`
* `gaps horizontal|vertical|top|right|bottom|left all|current
set|plus|minus <amount>`
* `workspace <ws> gaps horizontal|vertical|top|right|bottom|left
<amount>`
`inner` and `outer` are also still available as options for all three
of the above commands. `outer` now acts as a shorthand to set/alter
all sides.
Additionally, this fixes two bugs with the prevention of invalid gap
configurations for workspace configs:
1. If outer gaps were not set and inner gaps were, the outer gaps
would be snapped to the negation of the inner gaps due to `INT_MIN`
being less than the negation. This took precedence over the default
outer gaps.
2. Similarly, if inner gaps were not set and outer gaps were, inner
gaps would be set to zero, which would take precedence over the
default inner gaps.
Fixing both of the above items also requires checking the gaps again
when creating a workspace since the default outer gaps can be smaller
than the negation of the workspace specific inner gaps.
There's no point having both movement_direction and wlr_direction. This
replaces the former with the latter.
As movement_direction also contained MOVE_PARENT and MOVE_CHILD items,
these are now checked specifically in the focus command and handled in
separate functions, just like the other focus variants.
The previous pull request #2993 tried to fix this by moving the function which
used the layers after the initilization.
Since this initialization is done unconditionally only depending on the struct
definition, move the layer initialization to the beginning of the function.
Also move the signal initialization of the destroy event.
Fixes#2992
In i3, when a child of a tabbed or stacked container has no siblings,
its border settings are respected.
This patch achieves the same effect by rendering a lone tabbed/stacked
child as if it's a linear container. This makes the border settings be
respected.
Over in view_autoconfigure, we compensate for this by only adjusting
`y_offset` if there's multiple children.
When a floating container is tiled (e.g.: 'floating toggle' or
'floating disable'), it should be placed after/below the inactive
focused container from the tiling layout.
This approaches cursor rebasing from a different angle. Rather than
littering the codebase with cursor_rebase calls and using transaction
callbacks, this just runs cursor_rebase after applying every transaction
- but only if there's outputs connected, because otherwise it causes a
crash during shutdown.
There is one known case where we still need to call cursor_rebase
directly, and that's when running `seat seat0 cursor move ...`. This
command doesn't set anything as dirty so no transaction occurs.
This fixes a regression introduced by
662466e8db. When adding a container to the
scratchpad, setting container->scratchpad = true before
container_set_floating made container_set_floating believe that the
container was already floating. This fixes it by setting the property
afterwards instead.
window_properties is documented to contain a subset of the X11 properties
of a window (its title, class, instance, role, and transient ID). This
commit adds the missing json object from the get_tree output for
xwayland windows only.
This is a follow-up of #2911.
Signed-off-by: Franklin "Snaipe" Mathieu <me@snai.pe>
Firstly, the container was wrongly identifying as a tiling container
because it had no workspace.
Secondly, when calculating the maximum possible size we can't use the
workspace if it's not there, so we'll allow unlimited size in this case.
QT unmaps the view before destroying the popup. We destroyed the popup
in response to the view unmapping, but then we'd attempt to destroy it a
second time which caused a crash.
The patch removes the listener.
I tested it with GTK as well, and can confirm the popup is still being
destroyed.
* When using multiple seats, each seat has its own prev_workspace_name
for the purpose of workspace back_and_forth.
* Removes prev_workspace_name global variable.
* Removes unused next_name_map function in tree/workspace.c.
* Fixes memory leak in seat_destroy (seat was not freed).
The input manager is a singleton object. Passing the sway_input_manager
argument to each of its functions is unnecessary, while removing the
argument makes it obvious to the caller that it's a singleton. This
patch removes the argument and makes the input manager use server.input
instead.
On a similar note:
* sway_input_manager.server is removed in favour of using the server
global.
* seat.input is removed because it can get it from server.input.
Due to a circular dependency, creating seat0 is now done directly in
server_init rather than in input_manager_create. This is because
creating seats must be done after server.input is set.
Lastly, it now stores the default seat name using a constant and removes
a second reference to seat0 (in input_manager_get_default_seat).
When a view unmaps, we call workspace_consider_destroy. This function
assumed the workspace would always have an output, but this is not the
case when hotplugged down to zero. The function now handles this and
allows itself to be destroyed when there is no output.
This means that workspace_begin_destroy must remove the workspace from
the root->saved_workspaces list to avoid an eventual dangling pointer,
so it does that now.
Lastly, when an output is plugged in again and it has to create a new
initial workspace for it, we must emit the workspace::init IPC event
otherwise swaybar shows no workspaces at all. I guess when you start
sway, swaybar is started after the workspace has been created which is
why this hasn't been needed earlier.
mliszcz
Brian Ashworth
emersion
db
minus
Drew DeVault
Ryan Dwyer
mwenzkowski
M Stoeckl
Ian Fan
Rouven Czerwinski
John Chen
Ryan Dwyer
Mihai Coman
Arthur Gautier
Florent de Lamotte
Rostislav Pehlivanov
Robinhuett
Cole Mickens
Franklin "Snaipe" Mathieu