Previously it was supplying a pointer to private struct wlr_xwm
which was useless for compositors. The wlr_xwayland pointer in
contrast does have a generic data field and thus can be used by
compositors to attach their own pointer.
Additionally change the return value from int to bool.
This is especially useful if the compositor wants to support X11
panels to control windows. Without the signal a compositor does
have to hook into the user_event_handler callback but that would
not change the _NET_SUPPORTED root window property.
In labwc, we have had trouble with XWayland windows using the Globally
Active input model (see wlr_xwayland_icccm_input_model()). Under
traditional X11, these windows do not expect to be given focus directly
by the window manager; rather, the WM sends them a WM_TAKE_FOCUS message
prompting the client to take focus voluntarily.
Currently, these clients are difficult to support with wlroots, because
wlr_xwayland_surface_activate() assumes the client window will always
accept the keyboard focus after being sent WM_TAKE_FOCUS. Some Globally
Active client windows (e.g. panels/toolbars) don't want to be focused.
It's useless at best to focus them, and might even make them misbehave.
Others do need keyboard focus to be functional -- and there doesn't seem
to be any reliable way to know this in advance.
Adding wlr_xwayland_surface_offer_focus() allows the compositor to send
WM_TAKE_FOCUS to a client window supporting it and then see whether the
client accepts or ignores the offer. If it accepts, the surface will emit
the focus_in signal notifying the compositor that it has received focus.
This is entirely opt-in. A compositor that doesn't want to use the new
function can continue to call wlr_xwayland_surface_activate() directly
just as before.
Currently _NET_WM_STATE is updated in xwm_focus_window() but
_NET_ACTIVE_WINDOW is updated in xwm_surface_activate(). In some cases
(for example, client-initiated focus changes) the two properties can get
out of sync.
Factor out a new function which updates both properties in sync.
Adjust the logic in xwm_handle_focus_in() to call either
xwm_focus_window() or xwm_set_focused_window(), or neither, as
appropriate.
This has been introduced way back in
be297d9d14 but is never used anywhere.
If compositors want to save the old dimensions before reacting to a
fullscreen or maximize event they can just grab the sizes within their
event handlers instead.
For XWayland surfaces that start maximized, it's best to send an initial
Configure event to set the size of the surface before mapping it. This
reduces visual glitches since the application sees the correct maximized
size when performing its initial layout and drawing.
wlroots surfaces emit their first "map" event after the XWayland window
has already been mapped and the first frame has been drawn & committed.
This is too late to send the initial Configure event.
So, add a new "map_request" event which is emitted immediately before
telling XWayland to map the window. Compositors can connect to this
event to send the initial Configure event to an XWayland app based on
its requested maximized (or fullscreen) state.
Compositors should not place anything visually on the screen at this
point but rather wait until the "map" event as before.
scan-build is a little confused, thinking xwm->xres value could change
during the execution of xwayland_surface_create so client_id_cookie
could end up used uninitialized.
The struct is just an unsigned int, so no harm in initializing it to get
it off the list.
Stop trying to maintain a per-file _POSIX_C_SOURCE. Instead,
require POSIX.1-2008 globally. A lot of core source files depend
on that already.
Some care must be taken on a few select files where we need a bit
more than POSIX. Some files need XSI extensions (_XOPEN_SOURCE) and
some files need BSD extensions (_DEFAULT_SOURCE). In both cases,
these feature test macros imply _POSIX_C_SOURCE. Make sure to not
define both these macros and _POSIX_C_SOURCE explicitly to avoid
POSIX requirement conflicts (e.g. _POSIX_C_SOURCE says POSIX.1-2001
but _XOPEN_SOURCE says POSIX.1-2008).
Additionally, there is one special case in render/vulkan/vulkan.c.
That file needs major()/minor(), and these are system-specific.
On FreeBSD, _POSIX_C_SOURCE hides system-specific symbols so we need
to make sure it's not defined for this file. On Linux, we can
explicitly include <sys/sysmacros.h> and ensure that apart from
symbols defined there the file only uses POSIX toys.
A motivating example of such problem - Zoom's popups that open on button presses.
Before this fix the popup would flicker and immediately disappear - because the PID is not yet
available for the verification (as the surface has not been associated yet), wlroots would refuse to
focus the popup and instead focus the previous window. This leads QT to interpret this as a sign to
close the popup.
This change moves the PID aqcuisition to an earlier phase - just where the window is created.
Instead, move the wlr_xwayland_surface_set_withdrawn() and
wlr_xwayland_surface_restack() calls to the MapNotify handler with an
override_redirect check, as they are done too early. This mirrors the logic in
the UnmapNotify handler and fixes a bug where wlr_xwayland_surface_restack()
would be called on an o-r window after the following sequence of requests:
- CreateWindow with override_redirect=True
- ChangeWindowAttributes with override_redirect=False
- MapWindow
Fixes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3770
This function allows compositors to set the _NET_WORKAREA property on
the root window. XWayland clients use _NET_WORKAREA to determine how
much of the screen is not covered by panels/docks. The property is used
for example by Qt to determine areas of the screen that popup menus
should not overlap (see QScreen::availableVirtualGeometry).
Translating the right/bottom coordinates from offsets to absolute
coordinates in wlroots (rather than in the compositor) was supposed to
be more reliable, since wlroots had access to the X11 screen size.
It ended up being less reliable, because the screen size values
(xwm->screen->width_in_pixels/height_in_pixels) are not updated when the
output layout changes.
So let's remove the translation from wlroots, and let the compositor
figure it out. From what I can understand of the current XWayland code,
the X11 screen size should generally match the overall wlr_output_layout
bounding box, which the compositor has access to.
Instead of sending one request, waiting for the reply, and
repeating for all properties we're interested in, we can send all
property requests in one go and then wait for the server to reply.
This increases type safety, makes it more obvious that role_data
must represent the role object, and will allow for automatic
cleanup when the resource is destroyed.
This fixes a use-after-free in the Sway patch to filter the Xwayland
shell [1].
The server is destroyed first, then the shell. The Xwayland process
might still be using the shell while running.
When the shell is destroyed, libwayland will invoke the global
filter (to figure out whether to send a wl_registry.global_remove
to clients). Then Sway will compare the client with
wlr_xwayland_server.client. However, at that point, the server is
gone.
Reset the server to NULL so that Sway can check whether the server
is still running.
[1]: https://github.com/swaywm/sway/pull/7647
Consolatis
Kirill Primak
John Lindgren
Isaac Freund
Ilia Bozhinov
Vaxry
Kenny Levinsen
Simon Ser
Grigory Kirillov
Sarunas Valaskevicius
novenary
mfk530
Christopher Snowhill
JiDe Zhang
Alexander Orzechowski