wlr_output is not well-suited to checking whether direct scan-out
is happening or not. Compositors may want to use their own external
swapchains, for instance.
Additionally, ab7eabac84 ("output: leverage
wlr_output_configure_primary_swapchain()") makes it so
output_basic_test() is called before the output swapchain is
initialized, resulting in false positives.
References: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3620
This allows callers to set a destination size different from the
buffer size to scale them.
The DRM backend supports this. The Wayland backend doesn't yet
(we'd need to wire up viewporter).
- Simplifies the backends
- Avoids having two ways to do the same thing: previously one could
disable a layer by either omitting it from wlr_output_state.layers,
or by passing a NULL buffer
- We can change our mind in the future: we can allow users to omit
some layers and define a meaning without breaking the API.
References: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/4017#note_1783997
When a new client comes in and tries to create a
zwlr_gamma_control_v1 object for an output which already has one,
we were destroying the old object and early-returning. The early
return causes the new object to not be set up properly: it's not
inserted in the list and doesn't get the gamma_size event.
Fix this by destroying the new object, and leave the old object
intact, which is what was the intent I think.
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3605
Replace our current logic to setup the primary swapchain with
wlr_output_configure_primary_swapchain().
- Removes some code, reducing duplication
- Stop overwriting wlr_output.swapchain with a yet-to-be-tested
swapchain: remove the error_destroy_swapchain label.
We've had this struct for a while. It'd be useful for compositors
if they want to manage the swap chains themselves instead of being
forced to use wlr_output's. Some compositors might also want to use
a swapchain without an output.
This is based on previous work [1] [2].
This new API allows compositors to display buffers without needing to
perform rendering operations. This API can be implemented on Wayland
using subsurfaces and on DRM using KMS planes.
Compared to [1], this approach leverages wlr_addon_set to let backends
attach their own private state to layers, removes the pending
state (necessary for interop with wlr_output_commit_state()) and
enum wlr_output_layer_state_field.
[1]: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/1985
[2]: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/3447
options->scanout_primary_output indicates an output on which scanout is desirable.
Set the missing SCANOUT flag.
Fixes: 0c966f102c ("linux-dmabuf-v1: add wlr_linux_dmabuf_feedback_v1_init_with_options()")
This patch allows surfaces without keyboard focus
but with pointer focus to receive valid tokens.
This can be relevant for applications using an older version of
the layershell protocol which only provided the choice between
no keyboard focus and exclusive keyboard focus.
In output_ensure_buffer() we create a swapchain and attach an empty
buffer to the output if necessary. We do that during the first commit.
This is fine when the first commit enables the output, however this breaks
when the first commit disables the output. A commit which disables an
output and has a buffer attached is invalid (see output_basic_test()), and
makes the DRM backend crash:
00:00:00.780 [wlr] [backend/drm/drm.c:622] connector eDP-1: Turning off
../subprojects/wlroots/backend/drm/drm.c:652:44: runtime error: member access within null pointer of type 'struct wlr_drm_crtc'
AddressSanitizer:DEADLYSIGNAL
=================================================================
==2524==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000000 (pc 0x7f22e894afc1 bp 0x7ffe1d57c550 sp 0x7ffe1d57c420 T0)
==2524==The signal is caused by a READ memory access.
==2524==Hint: address points to the zero page.
#0 0x7f22e894afc1 in drm_connector_commit_state ../subprojects/wlroots/backend/drm/drm.c:652
#1 0x7f22e894b1f5 in drm_connector_commit ../subprojects/wlroots/backend/drm/drm.c:674
#2 0x7f22e89e8da9 in wlr_output_commit_state ../subprojects/wlroots/types/output/output.c:756
#3 0x555ab325624d in apply_output_config ../sway/config/output.c:517
#4 0x555ab31a1aa1 in handle_new_output ../sway/desktop/output.c:974
#5 0x7f22e9272f6d in wl_signal_emit_mutable (/usr/lib/libwayland-server.so.0+0x9f6d)
#6 0x7f22e899b012 in new_output_reemit ../subprojects/wlroots/backend/multi/backend.c:161
#7 0x7f22e9272f6d in wl_signal_emit_mutable (/usr/lib/libwayland-server.so.0+0x9f6d)
#8 0x7f22e895a153 in scan_drm_connectors ../subprojects/wlroots/backend/drm/drm.c:1488
#9 0x7f22e893c2e4 in backend_start ../subprojects/wlroots/backend/drm/backend.c:24
#10 0x7f22e892ed00 in wlr_backend_start ../subprojects/wlroots/backend/backend.c:56
#11 0x7f22e8999b83 in multi_backend_start ../subprojects/wlroots/backend/multi/backend.c:31
#12 0x7f22e892ed00 in wlr_backend_start ../subprojects/wlroots/backend/backend.c:56
#13 0x555ab317d5cc in server_start ../sway/server.c:316
#14 0x555ab317748d in main ../sway/main.c:400
#15 0x7f22e783c28f (/usr/lib/libc.so.6+0x2328f)
#16 0x7f22e783c349 in __libc_start_main (/usr/lib/libc.so.6+0x23349)
#17 0x555ab3134c84 in _start (/home/simon/src/sway/build/sway/sway+0x377c84)
Fixes: 3be6658ee7 ("output: allocate swapchain on first commit")
Closes: https://github.com/swaywm/sway/issues/7373
When a client attaches a NULL buffer to its wl_surface, it's
unmapped. This resets the xdg_surface in its initial state. An
extra NULL commit makes the compositor send an initial configure
event.
Note, wlr_xdg_toplevel.added is separate from wlr_xdg_surface.added.
Closes: https://github.com/swaywm/sway/issues/7397
The invalid_destroy and invalid_unlock protocol errors aren't currently
sent by wlroots and instead left up to the compositor. However, we can
handle these as well without much additional complexity.
This also adds a missing wl_resource_destroy() call if the lock is inert
in lock_handle_unlock_and_destroy().
wlroots uses "// private state" comments to denote structure fields
which shouldn't be accessed by compositors, so let's drop
wlr_output_layout_output_state and inline its fields into
wlr_output_layout_output; this also simplifies layout output creation.
With the Vulkan renderer we don't support implicit modifiers.
However wl_drm only supports implicit modifiers.
Stop advertising wl_drm formats when implicit modifiers are
unsupported.
Query the formats at init time, then forget about the renderer.
This will allow wl_drm to be created with a list of formats instead
of a renderer, and will behave better after a GPU reset.
The backend no longer changes the output state behind the
compositor's back. Instead, compositors can listen to the "commit"
event and check for WLR_OUTPUT_STATE_ENABLED/WLR_OUTPUT_STATE_MODE.
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/2300
Some compositors may want to use the linux-dmabuf-v1 implementation
with a completely custom renderer. Add a function to create the
global with a default feedback.
...when only one edge is anchored.
The layer-shell protocol specifies that a positive exclusive-zone value is
'meaningful' if the surface is anchored to either:
1. one edge
2. one edge and both perpendicular edges.
For example, if you wish to position a layer-shell client along the top
edge and make it exclusive, you should be able to either set anchor=TOP or
anchor=TOP|LEFT|RIGHT. It appears that many panels/bars use the latter
approach (anchor to an edge and also both perpendicular edges) which is
probably why this has not been reported previously.
This patch adds support for the first case and thereby makes exclusive
zone behaviour consistent with the protocol and also with sway's extant
layer-shell implementation.
Now, it is checked whether an output pixel corresponds to an integer
number of buffer pixels; if it doesn't, the region is altered to take
this into account.
This allows the backend to have access to the frame damage, as
reported by the scanned-out client. Some KMS drivers can make use
of it (e.g. for PSR, or optimized USB transfers in the GUD driver),
and the Wayland/X11 backends forward it to the parent compositor.
This is a first step towards moving texture uploading out of
wlr_compositor.
This commit allows compositors to opt-out of the texture uploading
by passing a NULL wlr_renderer. An immediate user of this is
gamescope, which currently implements a stub wlr_renderer just to
make wlr_compositor happy.
Fixes
In file included from /usr/include/wayland-server-core.h:32,
from ../types/seat/wlr_seat_pointer.c:6:
In function 'wl_fixed_from_double',
inlined from 'wlr_seat_pointer_send_axis' at ../types/seat/wlr_seat_pointer.c:367:6:
/usr/include/wayland-util.h:641:17: error: 'low_res_value' may be used uninitialized [-Werror=maybe-uninitialized]
641 | u.d = d + (3LL << (51 - 8));
| ~~^~~~~~~~~~~~~~~~~~~
../types/seat/wlr_seat_pointer.c: In function 'wlr_seat_pointer_send_axis':
../types/seat/wlr_seat_pointer.c:329:16: note: 'low_res_value' was declared here
329 | double low_res_value;
| ^~~~~~~~~~~~~
Use a basic linked list to store the currently active mappings.
Note that we don't actually need to implement a full lock-free
atomic linked list here. The signal handler will never write to
the list, it will only read it. Only the main thread will write.
We need to always expose a consistent view of the list to the
signal handler (the main thread might be interrupted at any point
by the signal handler).
This is a re-implementation of wl_shm. The motivations for using
this over the one shipped in libwayland are:
- Properly handle SIGBUS when accessing a wl_buffer's underlying
data after the wl_buffer protocol object has been destroyed.
With the current code, we just crash if the client does that
and then shrinks the backing file.
- No need to fight the wl_shm_buffer API anymore. This was awkward
because we weren't notified when clients created a wl_shm buffer,
and this doesn't play well with our wlr_buffer abstraction.
- Access to the underlying FD. This makes it possible to forward
the wl_shm buffer to a parent compositor with the Wayland/X11
backends.
- Better stride checks. We can use our format table to ensure that
the stride is consistent with the bpp and width.
The concept of a persistent accumulated surface offset is wrong
from a protocol point-of-view. wl_surface.offset is tied to a
commit, its interpretation depends on the surface role.
For example, with the following sequence:
wl_surface@1.offset(1, 1)
wl_surface@1.commit()
wl_pointer@2.set_cursor(wl_surface@1, 42, 42)
The final cursor hotspot is (42, 42): the commit which happened
before the set_cursor request has no impact on the hotspot
computation.
The wlr_output_cursor logic already uses wlr_surface.current.{dx,dy}.
wlr_scene's drag icon doesn't, update it accordingly.
This allows compositors to indicate which features they support,
and is required to eventually make this API stable.
References: https://github.com/swaywm/sway/issues/7260
If a fixed mode matching the user requirements is available, use
that. This avoids generating the mode with GTF or CVT in the DRM
backend, and instead uses mode timings advertised by the output.
References: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3514
If a new buffer is set for a buffer node, we must update the entire
node unconditionally if the buffer size changes, or the buffer is given
a buffer where it was previously NULL.
While we're here, let's avoid calling scene_node_update on just damage
updates. If the caller hasn't given us a damage region we just assume
the whole buffer.
If the area calculations for output overlap overflow a signed int, we
may not consider it to be a primary output. Turn this into an unsigned
type so this happens less frequently.
Additionally, it is possible the overflow would produce 0, we can handle
this by simply changing the comparison to more than or equal.
While we're here, let's assert that we always assign a primary output
if there are any intersecting outputs.
We were crashing in the error codepath [1] when
wlr_drm_create_lease() fails.
To fix this, delay the creation of the wlr_drm_lease_v1 until the
request is granted. Previously we were allocating that struct early
without populating the drm_lease field. However that means we ended
up with a half-constructed struct in the error codepath which is
annoying to handle.
[1]: https://github.com/swaywm/sway/issues/7204#issuecomment-1269797356
On first commit, require a new buffer if the compositor called a
mode-setting function, even if the mode won't change. This makes it
so the swapchain is created now.
Stop trying to check whether the backend supports buffer-less modesets
because that makes everything more complicated. For instance, the
DRM backend doesn't need a new buffer if the previous DRM master left
the output enabled.
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3499
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3502
Some compositors want to have full control over the buffers attached
to the output, and don't want to use the internal swapchain. Such
compositors include KWinFT (allocates its buffers on its own) and
gamescope (uses a headless output without any buffers).
Let's just make output_ensure_buffer() a no-op in that case.
Simon Ser
Kirill Primak
Isaac Freund
Alexander Orzechowski
Alexander Orzechowski
Vasyl Vavrychuk
Kenny Levinsen
Consolatis
bi4k8
xiliuya
Ronan Pigott
Simon Zeni
Johan Malm
Guido Günther