The kernel complains when the damage exceeds the FB bounds:
[73850.448326] i915 0000:00:02.0: [drm:drm_atomic_check_only] [PLANE:31:plane 1A] invalid damage clip 0 0 2147483647 2147483647
Make the DRM backend behave like the Wayland one and allow compositors
to damage (0, 0, INT32_MAX, INT32_MAX) to repaint everything without
needing to know the exact buffer size.
Closes: https://github.com/swaywm/sway/issues/7632
Based on five calls:
wlr_render_timer_create - creates a timer which can be reused across
frames on the same renderer
wlr_renderer_begin_buffer_pass - now takes a timer so that backends can
record when the rendering starts and finishes
wlr_render_timer_get_time - should be called as late as possible so that
queries can make their way back from the GPU
wlr_render_timer_destroy - self-explanatory
The timer is exposed as an opaque `struct wlr_render_timer` so that
backends can store whatever they want in there.
Commit 90d08f8f1c changed the way
wlr_drm_format_intersect worked, including passing in a destination
format list. This breaks scenarios where the intersection doesn't
find any matching formats, since we still have a valid destination
format set. This changes it to only return true if more than one
matching format is present in the intersection list.
In the logic of the DRM backend in backend_destroy, wlr_backend_finish
is called first, then the outputs are destroyed and then the
display->destroy.link is removed from the list.
This commit applies the same order to the headless backend.
Add a src_box state field. Use the SRC_* KMS props in the DRM
backend, reject the layers in the Wayland backend (for now, we can
support it later via viewporter).
This allows callers to set a destination size different from the
buffer size to scale them.
The DRM backend supports this. The Wayland backend doesn't yet
(we'd need to wire up viewporter).
since wayland doesn't provide a touch id in cancel events, track what
points are active so we can cancel all of them
timestamp is also not provided - use 0 because no one's paying attention
to that anyway
Closes#3000
- Simplifies the backends
- Avoids having two ways to do the same thing: previously one could
disable a layer by either omitting it from wlr_output_state.layers,
or by passing a NULL buffer
- We can change our mind in the future: we can allow users to omit
some layers and define a meaning without breaking the API.
References: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/4017#note_1783997
Instead of littering #ifdefs everywhere, move them to the dedicated
attempt_XXX_backend() functions. This makes the logic in
wlr_backend_autocreate() more readable, and provides better error
messages when the X11/Wayland backends are disabled at compile-time,
or when WLR_BACKENDS contains a backend disabled at compile-time.
When we change the required dependencies for the DRM backend,
Meson might auto-disable the backend for users missing the new
requirements. This results in confused users [1] because they don't
notice the "drm-backend: NO" line burried in the Meson logs, and
then get a black screen when starting the compositor.
Update wlr_backend_autocreate() to refuse to create a backend with
only libinput (without DRM).
Users really wanting to start their compositor with a libinput
backend and without a DRM backend can manually set WLR_BACKENDS.
[1]: https://github.com/swaywm/sway/issues/7457
We've had this struct for a while. It'd be useful for compositors
if they want to manage the swap chains themselves instead of being
forced to use wlr_output's. Some compositors might also want to use
a swapchain without an output.
Instead of destroying all seats, destroy a single one. We only need
to destroy all seats at one call-site (backend_destroy), but we'll
need to destroy a single seat elsewhere in the next commit.
The hardcoded fallback "/usr/share/hwdata/pnp.ids" was only a
temporary solution to get things working while distributions were
still working on shipping it.
During a modeset, the core wlr_output logic will allocate a buffer
with a new size and commit it. However if we still have a frame
callback pending we'd refuse to perform the commit. This is
inconsistent with the DRM backend, which performs a blocking
modeset.
This is visible when resizing the Wayland toplevel. The logs are
filled with "Skipping buffer swap", and the wlr_damage_ring's
bounds are not properly updated.
Fix this by destroying the pending frame wl_callback.
Because wl_buffer.release is per-buffer and not per-commit, the
Wayland backend might create multiple struct wlr_wl_buffer per
struct wlr_buffer. As a result, the wlr_buffer_unlock() call inside
destroy_wl_buffer() can cause another struct wlr_wl_buffer to be
destroyed.
In backend_destroy() we were iterating the list of buffers with
wl_list_for_each_safe(), which is actually not safe in this case:
the next buffer is cached, but might be destroyed as a side-effect
of calling destroy_wl_buffer().
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3572
Since 1d581656c7 ("backend/drm: set "max bpc" to the max") we
set the "max bpc" property to the maximum value. The kernel driver
is supposed to clamp this value depending on hardware capabilities.
All kernel drivers lower the value depending on the GPU capabilities.
However, none of the drivers lower the value depending on the DP-MST
link capabilities. Thus, enabling a 4k@60Hz mode can fail on some
DP-MST setups due to the "max bpc" property.
Additionally, it's not a good idea to unconditionally set "max bpc"
to the max. A high bpc consumes more lanes and more clock speed,
which means higher power consumption and the busy lanes cannot be
used for something else (e.g. other data transfers on a USB-C cable).
For now, let's tie the "max bpc" to the pixel format of the buffer.
Introduce a heuristic to make "high bit-depth buffer" a synonym of
"I want the best quality".
This is not perfect: a "max bpc" higher than 8 might be desirable
for pixel formats with a color depth of 8 bits, for instance when
the color management KMS properties are used. But we don't really
support that yet, so let's leave this for later.
Closes: https://github.com/swaywm/sway/issues/7367
When the user switches away from the VT where wlroots is running,
the new DRM master may mutate the KMS state in an arbitrary manner.
For instance, let's say wlroots uses the following connector/CRTC
mapping:
- CRTC 42 drives connector DP-1
- CRTC 43 drives connector DP-2
Then the new DRM master may swap the mapping like so:
- CRTC 42 drives connector DP-2
- CRTC 43 drives connector DP-1
wlroots needs to restore its own state when the user switches back.
Some state is attached to wlr_drm_crtc (e.g. current FB), so reading
back and adopting the CRTC/connector mapping left by the previous DRM
master would be complicated (this was the source of other bugs in the
past, see [1]).
With the previous logic, wlroots merely tries to restore the state
of each connector one after the other. This fails in the scenario
described above: the kernel refuses to use CRTC 42 for DP-1, because
that CRTC is already in-use for DP-2.
Unfortunately with the legacy uAPI it's not possible to restore the
state in one go. We need to support both legacy and atomic uAPIs, so
let's fix the bug for the legacy uAPI first, and then improve the
situation for the atomic uAPI as a second step [2].
We need to disable the CRTCs we're going to switch the connectors for.
This sounds complicated, so let's just disable all CRTCs to simplify.
This causes a black screen because of the on/off modesets, but makes
VT switch much more reliable, so I'll take it.
[1]: c6d8a11d2c
[2]: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/3794
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3342
Simon Ser
Rose Hudson
Austin Shafer
Tobias Predel
Alexander Orzechowski
zhoulei
ptrcnull