You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
325 lines
14 KiB
325 lines
14 KiB
sway-input(5)
|
|
|
|
# NAME
|
|
|
|
sway-input - input configuration file and commands
|
|
|
|
# DESCRIPTION
|
|
|
|
Sway allows for configuration of devices within the sway configuration file.
|
|
To obtain a list of available device identifiers, run *swaymsg -t get_inputs*.
|
|
Settings can also be applied to all input devices by using the wildcard, _\*_,
|
|
in place of _\<identifier\>_ in the commands below. In addition, the settings
|
|
can be applied to a type of device, by using _type:\<input_type\>_ in place
|
|
of _\<identifier\>_.
|
|
|
|
In the configuration file, settings with a more specific selector take
|
|
precedence over more general ones: _\<identifier\>_ \> _type:\<input_type\>_ \>
|
|
_\*_. When executing input commands, however, the settings are applied to all
|
|
matching input devices! This means that _type:\<input_type\>_ can override
|
|
previously set _\<identifier\>_ settings, even though in a configuration file
|
|
they would take precedence. Similarly _\*_ can override both _\<identifier\>_
|
|
and _type:\<input_type\>_ settings, if applied later.
|
|
|
|
Tip: If the configuration settings do not appear to be taking effect, you could
|
|
try using _\*_ instead of _\<identifier\>_. If it works with the wildcard, try
|
|
using a different identifier from *swaymsg -t get_inputs* until you find the
|
|
correct input device.
|
|
|
|
Current available input types are:
|
|
|
|
- touchpad
|
|
- pointer
|
|
- keyboard
|
|
- touch
|
|
- tablet_tool
|
|
- tablet_pad
|
|
- switch
|
|
|
|
Note: The type configurations are applied as the devices appear and get applied
|
|
on top of the existing device configurations.
|
|
|
|
# INPUT COMMANDS
|
|
|
|
## KEYBOARD CONFIGURATION
|
|
|
|
*input* <identifier> repeat_delay <milliseconds>
|
|
Sets the amount of time a key must be held before it starts repeating.
|
|
|
|
*input* <identifier> repeat_rate <characters per second>
|
|
Sets the frequency of key repeats once the repeat_delay has passed.
|
|
|
|
For more information on these xkb configuration options, see
|
|
*xkeyboard-config*(7).
|
|
|
|
*input* <identifier> xkb_file <file_name>
|
|
Sets all xkb configurations from a complete .xkb file. This file can be
|
|
dumped from _xkbcomp $DISPLAY keymap.xkb_. This setting overrides
|
|
xkb_layout, xkb_model, xkb_options, xkb_rules, and xkb_variant settings.
|
|
|
|
*input* <identifier> xkb_layout <layout_name>
|
|
Sets the layout of the keyboard like _us_ or _de_.
|
|
|
|
Multiple layouts can be specified by separating them with commas.
|
|
|
|
*input* <identifier> xkb_model <model_name>
|
|
Sets the model of the keyboard. This has an influence for some extra keys
|
|
your keyboard might have.
|
|
|
|
*input* <identifier> xkb_options <options>
|
|
Sets extra xkb configuration options for the keyboard.
|
|
|
|
Multiple options can be specified by separating them with commas.
|
|
|
|
*input* <identifier> xkb_rules <rules>
|
|
Sets files of rules to be used for keyboard mapping composition.
|
|
|
|
*input* <identifier> xkb_switch_layout <index>|next|prev
|
|
Changes the active keyboard layout to <index> counting from zero or to
|
|
next or previous layout on the list. If there is no next or previous
|
|
layout, this command hops to the other end of the list.
|
|
|
|
This can be used when multiple layouts are configured with *xkb_layout*.
|
|
A list of layouts you can switch between can be obtained with
|
|
*swaymsg -t get_inputs*.
|
|
|
|
*input* <identifier> xkb_variant <variant>
|
|
Sets the variant of the keyboard like _dvorak_ or _colemak_.
|
|
|
|
The following commands may only be used in the configuration file.
|
|
|
|
*input* <identifier> xkb_capslock enabled|disabled
|
|
Initially enables or disables CapsLock on startup, the default is disabled.
|
|
|
|
*input* <identifier> xkb_numlock enabled|disabled
|
|
Initially enables or disables NumLock on startup, the default is disabled.
|
|
|
|
## TABLET CONFIGURATION
|
|
|
|
*input* <identifier> tool_mode <tool> <absolute|relative>
|
|
Sets whether movement of a tablet tool should be treated as absolute or
|
|
relative; the default is absolute.
|
|
|
|
Valid values for _\<tool\>_ are currently "pen", "eraser", "brush",
|
|
"pencil", "airbrush", and the wildcard _\*_, which matches all tools.
|
|
|
|
Mouse and lens tools ignore this setting and are always treated as relative.
|
|
|
|
## MAPPING CONFIGURATION
|
|
|
|
*input* <identifier> map_to_output <identifier>
|
|
Maps inputs from this device to the specified output. Only meaningful if the
|
|
device is a pointer, touch, or drawing tablet device.
|
|
|
|
The wildcard _\*_ can be used to map the input device to the whole desktop
|
|
layout.
|
|
|
|
*input* <identifier> map_to_region <X> <Y> <width> <height>
|
|
Maps inputs from this device to the specified region of the global output
|
|
layout. Only meaningful if the device is a pointer, touch, or drawing tablet
|
|
device.
|
|
|
|
*input* <identifier> map_from_region <X1xY1> <X2xY2>
|
|
Ignores inputs from this device that do not occur within the specified
|
|
region. Can be in millimeters (e.g. 10x20mm 20x40mm) or the fraction of the
|
|
full available space in terms of 0..1 (e.g. 0.5x0.5 0.7x0.7). Not all
|
|
devices support millimeters. Only meaningful if the device is not a
|
|
keyboard and provides events in absolute terms (such as a drawing tablet
|
|
or touch screen - most pointers provide events relative to the previous
|
|
frame).
|
|
|
|
Commonly used to maintain the aspect ratio of the input device and screen.
|
|
Cropping a 16:10 input region to match a 16:9 display can use 0x0 1x0.9 as
|
|
the argument.
|
|
|
|
## LIBINPUT CONFIGURATION
|
|
|
|
*input* <identifier> accel_profile adaptive|flat
|
|
Sets the pointer acceleration profile for the specified input device.
|
|
|
|
*input* <identifier> calibration_matrix <6 space-separated floating point values>
|
|
Sets the calibration matrix.
|
|
|
|
*input* <identifier> click_method none|button_areas|clickfinger
|
|
Changes the click method for the specified device.
|
|
|
|
*input* <identifier> clickfinger_button_map lrm|lmr
|
|
Specifies which button mapping to use for clickfinger. _lrm_ treats 1 finger as
|
|
left click, 2 fingers as right click, and 3 fingers as middle click. _lmr_
|
|
treats 1 finger as left click, 2 fingers as middle click, and 3 fingers as
|
|
right click.
|
|
|
|
*input* <identifier> drag enabled|disabled
|
|
Enables or disables tap-and-drag for specified input device.
|
|
|
|
*input* <identifier> drag_lock enabled|disabled
|
|
Enables or disables drag lock for specified input device.
|
|
|
|
*input* <identifier> dwt enabled|disabled
|
|
Enables or disables disable-while-typing for the specified input device.
|
|
|
|
*input* <identifier> dwtp enabled|disabled
|
|
Enables or disables disable-while-trackpointing for the specified input
|
|
device.
|
|
|
|
*input* <identifier> events enabled|disabled|disabled_on_external_mouse|toggle [<toggle-modes>]
|
|
Enables or disables send_events for specified input device. Disabling
|
|
send_events disables the input device.
|
|
|
|
The _toggle_ option cannot be used in the config. If no toggle modes are
|
|
listed, all supported modes for the device will be toggled through in the
|
|
order: enabled, disabled_on_external_mouse, disabled, (loop back). If
|
|
toggle modes are listed, they will be cycled through, defaulting to the
|
|
first mode listed if the current mode is not in the list. They will also
|
|
not be checked to see if they are supported for the device and may fail.
|
|
|
|
*input* <identifier> left_handed enabled|disabled
|
|
Enables or disables left handed mode for specified input device.
|
|
|
|
*input* <identifier> middle_emulation enabled|disabled
|
|
Enables or disables middle click emulation.
|
|
|
|
*input* <identifier> natural_scroll enabled|disabled
|
|
Enables or disables natural (inverted) scrolling for the specified input
|
|
device.
|
|
|
|
*input* <identifier> pointer_accel [<-1|1>]
|
|
Changes the pointer acceleration for the specified input device.
|
|
|
|
*input* <identifier> rotation_angle <angle>
|
|
Sets the rotation angle of the device to the given clockwise angle in
|
|
degrees. The angle must be between 0.0 (inclusive) and 360.0 (exclusive).
|
|
|
|
*input* <identifier> scroll_button disable|button[1-3,8,9]|<event-code-or-name>
|
|
Sets the button used for scroll_method on_button_down. The button can
|
|
be given as an event name or code, which can be obtained from *libinput
|
|
debug-events*, or as a x11 mouse button (button[1-3,8,9]). If set to
|
|
_disable_, it disables the scroll_method on_button_down.
|
|
|
|
*input* <identifier> scroll_button_lock enabled|disabled
|
|
Enables or disables scroll button lock for specified input device.
|
|
|
|
*input* <identifier> scroll_factor <floating point value>
|
|
Changes the scroll factor for the specified input device. Scroll speed will
|
|
be scaled by the given value, which must be non-negative.
|
|
|
|
*input* <identifier> scroll_method none|two_finger|edge|on_button_down
|
|
Changes the scroll method for the specified input device.
|
|
|
|
*input* <identifier> tap enabled|disabled
|
|
Enables or disables tap for specified input device.
|
|
|
|
*input* <identifier> tap_button_map lrm|lmr
|
|
Specifies which button mapping to use for tapping. _lrm_ treats 1 finger as
|
|
left click, 2 fingers as right click, and 3 fingers as middle click. _lmr_
|
|
treats 1 finger as left click, 2 fingers as middle click, and 3 fingers as
|
|
right click.
|
|
|
|
## SEAT CONFIGURATION
|
|
|
|
Configure options for multiseat mode.
|
|
|
|
A *seat* is a collection of input devices that act independently of each other.
|
|
Seats are identified by name and the default seat is _seat0_ if no seats are
|
|
configured. While sway is running, _-_ (hyphen) can be used as an alias for the
|
|
current seat. Each seat has an independent keyboard focus and a separate cursor
|
|
that is controlled by the pointer devices of the seat. This is useful for
|
|
multiple people using the desktop at the same time with their own devices (each
|
|
sitting in their own "seat"). The wildcard character, _\*_, can also be used in
|
|
place of _\<identifier\>_ to change settings for all seats.
|
|
|
|
Tip: If the configuration settings do not appear to be taking effect, you could
|
|
try using _\*_ instead of _\<identifier\>_. If it works with the wildcard, try
|
|
using a different identifier from *swaymsg -t get_seats* until you find the
|
|
correct seat.
|
|
|
|
*seat* <name> attach <input_identifier>
|
|
Attach an input device to this seat by its input identifier. A special
|
|
value of "\*" will attach all devices to the seat.
|
|
|
|
*seat* <seat> cursor move|set <x> <y>
|
|
Move specified seat's cursor relative to current position or wrap to
|
|
absolute coordinates (with respect to the global coordinate space).
|
|
Specifying either value as 0 will not update that coordinate.
|
|
|
|
Deprecated: use the virtual-pointer Wayland protocol instead.
|
|
|
|
*seat* <seat> cursor press|release button[1-9]|<event-name-or-code>
|
|
Simulate pressing (or releasing) the specified mouse button on the
|
|
specified seat. The button can either be provided as a button event name or
|
|
event code, which can be obtained from *libinput debug-events*, or as an x11
|
|
mouse button (button[1-9]). If using button[4-7], which map to axes, an axis
|
|
event will be simulated, however _press_ and _release_ will be ignored and
|
|
both will occur.
|
|
|
|
Deprecated: use the virtual-pointer Wayland protocol instead.
|
|
|
|
*seat* <name> fallback true|false
|
|
Set this seat as the fallback seat. A fallback seat will attach any device
|
|
not explicitly attached to another seat (similar to a "default" seat).
|
|
|
|
*seat* <name> hide_cursor <timeout>|when-typing [enable|disable]
|
|
Hides the cursor image after the specified event occurred.
|
|
|
|
If _timeout_ is specified, then the cursor will be hidden after _timeout_
|
|
(in milliseconds) has elapsed with no activity on the cursor. A timeout of 0
|
|
(default) disables hiding the cursor. The minimal timeout is 100 and any
|
|
value less than that (aside from 0), will be increased to 100.
|
|
|
|
If _when-typing_ is enabled, then the cursor will be hidden whenever a key
|
|
is pressed.
|
|
|
|
Be aware that this setting can interfere with input handling in games and
|
|
certain types of software (Gimp, Blender etc) that rely on simultaneous
|
|
input from mouse and keyboard.
|
|
|
|
*seat* <name> idle_inhibit <sources...>
|
|
Sets the set of input event sources which can prevent the seat from
|
|
becoming idle, as a space separated list of source names. Valid names are
|
|
"keyboard", "pointer", "touchpad", "touch", "tablet_pad", "tablet_tool",
|
|
and "switch". The default behavior is to prevent idle on any event.
|
|
|
|
*seat* <name> keyboard_grouping none|smart
|
|
Set how the keyboards in the seat are grouped together. Currently, there
|
|
are two options. _none_ will disable all keyboard grouping. This will make
|
|
it so each keyboard device has its own isolated state. _smart_ will
|
|
group the keyboards in the seat by their keymap and repeat info. This is
|
|
useful for when the keyboard appears as multiple separate input devices.
|
|
In this mode, the effective layout is synced between the keyboards in the
|
|
group. The default is _smart_. To restore the behavior of older versions
|
|
of sway, use _none_.
|
|
|
|
*seat* <name> pointer_constraint enable|disable|escape
|
|
Enables or disables the ability for clients to capture the cursor (enabled
|
|
by default) for the seat. This is primarily useful for video games. The
|
|
"escape" command can be used at runtime to escape from a captured client.
|
|
|
|
*seat* <name> shortcuts_inhibitor enable|disable|activate|deactivate|toggle
|
|
Enables or disables the ability of clients to inhibit keyboard
|
|
shortcuts for the seat. This is primarily useful for virtualization and
|
|
remote desktop software. Subcommands _enable_ and _disable_ affect
|
|
whether future inhibitors are honoured by default, i.e. activated
|
|
automatically, the default being _enable_. When used at runtime,
|
|
_disable_ also disables any currently active inhibitors. _activate_,
|
|
_deactivate_ and _toggle_ are only usable at runtime and change the
|
|
state of a potentially existing inhibitor on the currently focused
|
|
window. This can be used with the current seat alias (_-_) to affect
|
|
only the currently focused window of the current seat. Subcommand
|
|
_deactivate_ is particularly useful in an _--inhibited_ *bindsym* to
|
|
escape a state where shortcuts are inhibited and the client becomes
|
|
uncooperative. It is worth noting that whether disabled or deactivated
|
|
inhibitors are removed is entirely up to the client. Depending on the
|
|
client it may therefore be possible to (re-)activate them later. Any
|
|
visual indication that an inhibitor is present is currently left to the
|
|
client as well.
|
|
|
|
*seat* <name> xcursor_theme <theme> [<size>]
|
|
Override the system default XCursor theme. The default seat's
|
|
(_seat0_) theme is also used as the default cursor theme in
|
|
XWayland, and exported through the _XCURSOR_THEME_ and
|
|
_XCURSOR_SIZE_ environment variables.
|
|
|
|
# SEE ALSO
|
|
|
|
*sway*(5) *sway-output*(5) *xkeyboard-config*(7)
|