This emits frame events for the seat_cmd_cursor subcommands. The
wl_pointer frame event are required to notify clients when to process
the events. It will now be emitted after cursor movement, button press,
button release, and axis events.
Add a separate per-view shortcuts_inhibitor command that can be used
with criteria to override the per-seat defaults. This allows to e.g.
disable shortcuts inhibiting globally but enable it for specific,
known-good virtualization and remote desktop software or, alternatively,
to blacklist that one slightly broken piece of software that just
doesn't seem to get it right but insists on trying.
Add a flag to sway_view and handling logic in the input manager that
respects that flag if configured but falls back to per-seat config
otherwise. Add the actual command but with just enable and disable
subcommands since there's no value in duplicating the per-seat
activate/deactivate/toggle logic here. Split the inhibitor retrieval
helper in two so we can use the backend half in the command to retrieve
inhibitors for a specific surface and not just the currently focused
one. Extend the manual page with documentation of the command and
references to its per-seat sibling and usefulness with criteria.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
This allows e.g. triggering one command while a key is held, then
triggering another to undo the change performed by it afterwards. One
use case for this is triggering push-to-talk functionality for VoIP
tools without granting them full access to all input events.
Fixes#3151
* check for workspace command name arg (fix#5131)
For the 'workspace <name> output <output>' command, output_location must
be greater than zero or the attempt to get the workspace name with
join_args will segfault or abort() (depending on the flavor of
sway_assert() in use). This checks and returns an error instead.
* put workspace output error string on one line
To ease grepping as requested
* check for name in workspace gaps command as well
A malformed command here will lead to the same result seen in #5131, so
add a check. Done inside the cmd_workspace_gaps() function itself, to
take advantage of the existing 'Expected...' string.
Remove some unnecessary brackets in an error condition check identified
during review of the shortcuts inhibitor command code (#5021).
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Add a command to influence keyboard shortcuts inhibitors. In its current
form it can be used to activate, deactivate or toggle an existing
inhibitor on the surface currently receiving input. This can be used to
define an escape shortcut such as:
bindsym --inhibited $mod+Escape seat - shortcuts_inhibitor deactivate
It also allows the user to configure a per-seat default of whether
keyboard inhibitors are honoured by default (the default) or not. Using
the activate/toggle command they can then enable the lingering inhibitor
at a later time of their choosing.
As a side effect this allows to specifically address a named seat for
actions as well, whatever use-case that might serve.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Adding support for the keyboard shortcuts inhibit protocol allows remote
desktop and virtualisation software to receive all keyboard input in
order to pass it through to their clients so users can fully interact
the their remote/virtual session. The software usually provides its own
key combination to release its "grab" to all keyboard input. The
inhibitor can be deactivated by the user by removing focus from the
surface using another input device such as the pointer.
Use support for the procotol in wlroots to add support to sway. Extend
the input manager with handlers for inhibitor creation and destruction
and appropriate bookkeeping. Attach the inhibitors to the seats they
apply to to avoid having to search the list of all currently existing
inhibitors on every keystroke and passing the inhibitor manager around.
Add a helper function to retrieve the inhibitor applying to the
currently focused surface of a seat, if one exists.
Extend bindsym with a flag for bindings that should be processed even if
an inhibitor is active. Conversely this disables all normal shortcuts if
an inhibitor is found for the currently focused surface in
keyboard::handle_key_event() since they don't have that flag set. Use
above helper function to determine if an inhibitor exists for the
surface that would eventually receive input.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
This enables/disables adaptive synchronization on the output.
For now, the default is disabled because it might cause flickering on
some hardware if clients don't submit frames at regular enough
intervals. In the future an "auto" option will only enable adaptive sync
if a fullscreen client opts-in via a Wayland protocol.
This adds support for input type configs to input_cmd_events. This works
similar to the wildcard handling that existed where configs for the
devices are stored and the type config is reset to INT_MIN so that it
does not override.
This also condenses the toggle_send_events and
toggle_wildcard_send_events functions into a single function to reduce
code duplication.
This patch makes it so users that have configured their screen with a
transform don't have to update their config after the wlroots breaking
change.
References: https://github.com/swaywm/wlroots/pull/2023
The condition in test_mark was checking the negation of list_seq_find.
This works fine for the first mark, but fails for every other mark. This
fixes the condition to check for anything other than -1, which is the
value returned from list_seq_find for index not found.
This makes it so invalid configs will return the exit code 1 when the
validation flag is given. This also reduces the log level to SWAY_ERROR,
which makes it so only the errors are shown. If someone wants more
verbose output, the can use the -V/--verbose or -d/--debug flags.
Additionally, this also makes it so swaybg will not be spawned when
validating the config.
Because the layout code rounds down the dimensions of the windows
resizing would often be off by one pixel. The width/height fraction
would not exactly reflect the final computed width and so the resize
code would end up calculating things wrong.
To fix this first snap the container size fractions to the pixel grid
and only then do the resize. Also use round() instead of floor() during
layout to avoid a slightly too small width. This applies in two cases:
1. For the container we are actually resizing using floor() might result
in being 1px too small.
2. For the other containers it might result in resizing them down by 1px
and then if the container being resized is the last all those extra
pixels would make the resize too large.
Fixes#4391
For i3 compatibility, allow the indicator and child_border colors values
to be optional. The indicator will fallback to sane defaults and
child_border will fallback to the background color for the class.
This is the third commit in a series of commits to refactor color
handling in sway. This removes add_color from commands.c. It was only
being used by bar_cmd_colors. This also changes the functions to use
parse_color which is used to validate rgb(a) colors throughout the code
base and is also what i3bar is using to parse the colors after they are
passed over ipc. After parsing the color and ensuring it is valid, the
rgba hex string is then generated using snprintf. This refactor also
ensures that all the colors for the command are valid before applying
any of them.
This is the second in a series of commits to refactor the color handling
in sway. This removes the duplicated color parsing code in
sway/commands/client.c. Additionally, this combines the parsing of
colors to float arrays with that in sway/config.c and introduces a
color_to_rgba function in commom/util.c.
As an added bonus, this also makes it so non of the colors in a border
color class will be changed unless all of the colors specified are
valid. This ensures that an invalid command does not get partially
applied.
This removes `seat <seat> keyboard_grouping keymap` and replaces it with
`seat <seat> keyboard_grouping smart`. The smart keyboard grouping will
group based on both the keymap and repeat info. The reasoning for this
is that deciding what the repeat info should be for a group is either
arbitrary or non-deterministic when multiple keyboards in the group have
repeat info configured (unless somehow exposed to the user in a
reproducible uniquely identifiable fashion).
This adds seat configuration options which can be used to configure what
events affect the idle behavior of sway.
An example use-case is mobile devices: you would remove touch from the
list of idle_wake events. This allows the phone to stay on while you're
actively using it, but doesn't wake from idle on touch events while it's
sleeping in your pocket.
For the validation pass of reloading, there is no need to touch swaybg,
swaynag, inputs, outputs, or seats. This drastically improves the speed
of a reload by skipping over the expensive I/O configuration and
handling of wayland clients. As long as the syntax is valid, the
CMD_FAILURE's can be relayed during the actual reload.
A wlr_keyboard_group allows for multiple keyboard devices to be
combined into one logical keyboard. This is useful for keyboards that
are split into multiple input devices despite appearing as one physical
keyboard in the user's mind.
This adds support for wlr_keyboard_groups to sway. There are two
keyboard groupings currently supported, which can be set on a per-seat
basis. The first keyboard grouping is none, which disables all grouping
and provides no functional change. The second is keymap, which groups
the keyboard devices in the seat by their keymap. With this grouping,
the effective layout and repeat info is also synced across keyboard
devices in the seat. Device specific bindings will still be executed as
normal, but everything else related to key and modifier events will be
handled by the keyboard group's keyboard.
This adds complete support for the barconfig_update ipc event. This also
changes the bar command and subcommand handlers to correctly emit the
event. This makes it so all bar subcommands other than id and
swaybar_command are dynamically changeable at runtime. sway-bar.5 has
been updated accordingly
In cmd_mode, the mode is currently being reset to the default mode after
a mode subcommand handler is executed. This stores and restores the mode
instead
Brian Ashworth
Michael Weiser
Simon Ser
Di Ma
Linus Heckemann
r-c-f
Jason Nader
Bor Grošelj Simić
Torstein Husebø
Alex Maese
Jason Nader
Ronan Pigott
Pedro Côrte-Real
Drew DeVault
Ivan Molodetskikh
Tadeo Kondrak
lbonn
Ben Brown