When REAPER submenu is closed `XCB_CLIENT_MESSAGE` with type
`NET_ACTIVE_WINDOW` is sent to set focus to parent menu.
Closes: https://github.com/swaywm/sway/issues/6324
Instead of calling wlr_xdg_surface_for_each_popup and then
wlr_surface_for_each_surface, use the new for_each_popup_surface helper
introduced in [1] that does it in one go.
[1]: https://github.com/swaywm/wlroots/pull/2609
Usually it should be enough to simply not grant a client's
minimize request, however some applications (Steam, fullscreen
games in Wine) don't wait for the compositor and minimize anyway,
getting them stuck in an unrecoverable state.
Restoring them immediately lead to heavy flickering when unfocused
on my test application (Earth Defense Force 5 via Steam), so it's
preferable to grant their request without actually minimizing and
then restoring them once they are in focus again.
During the execution of a resize transaction, the buffer associated
with a view's surface is saved and reused until the client acknowledges
the resulting configure event.
However, only one the main buffer of the main surface was stored and
rendered, meaning that subsurfaces disappear during resize.
Iterate over all, store and render buffers from all surfaces in the view
to ensure that correct rendering is preserved.
Add a separate per-view shortcuts_inhibitor command that can be used
with criteria to override the per-seat defaults. This allows to e.g.
disable shortcuts inhibiting globally but enable it for specific,
known-good virtualization and remote desktop software or, alternatively,
to blacklist that one slightly broken piece of software that just
doesn't seem to get it right but insists on trying.
Add a flag to sway_view and handling logic in the input manager that
respects that flag if configured but falls back to per-seat config
otherwise. Add the actual command but with just enable and disable
subcommands since there's no value in duplicating the per-seat
activate/deactivate/toggle logic here. Split the inhibitor retrieval
helper in two so we can use the backend half in the command to retrieve
inhibitors for a specific surface and not just the currently focused
one. Extend the manual page with documentation of the command and
references to its per-seat sibling and usefulness with criteria.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
The documentation for wayland-server.h says:
> Use of this header file is discouraged. Prefer including
> wayland-server-core.h instead, which does not include the server protocol
> header and as such only defines the library PI, excluding the deprecated API
> below.
Replacing wayland-server.h with wayland-server-core.h allows us to drop the
WL_HIDE_DEPRECATED declaration.
This commit si similar to wlroots' ca45f4490ccc ("Remove all wayland-server.h
includes").
Subsurfaces need access to the parent get_root_coords impl for positioning in
popups. To do this, we store a reference to the parent view_child where
applicable.
Fixes#4191.
This honors the fullscreen output request for
`xdg_toplevel_set_fullscreen` and `zxdg_toplevel_v6_set_fullscreen`.
If the request was sent before mapping, the fullscreen output request
will be retrieved from the client_pending state for the toplevel. The
output will be passed to `view_map` and if there is a workspace on the
output, the view will be placed on that workspace.
If the request comes in after being mapped, the view will be moved to
the workspace on the output (if there is one) before becoming
fullscreen.
Since not all child views's have an unmap event, it is possible for it
to still be mapped (default state) in the destruction handler. When
the destruction handler is called, the corresponding view may have
already been freed and the memory location reallocated. This adds a
listener for the view unmapping and removes the mapped status. This
ensures that the child view is damaged due to destruction while the
view still exists and not after.
Damage subsurfaces when they are destroyed. Since subsurfaces don't have an
unmap event we need to do that on destroy.
We also don't want to keep a sway_view_child when the wlr_subsurface has been
destroyed.
Fixes https://github.com/swaywm/sway/issues/3197
This renames/moves the following properties:
* sway_view.{x,y,width,height} ->
sway_container.content_{x,y,width,height}
* This is required to support placeholder containers as they don't
have a view.
* sway_container_state.view_{x,y,width,height} ->
sway_container_state.content_{x,y,width,height}
* To remain consistent with the above.
* sway_container_state.con_{x,y,width,height} ->
sway_container_state.{x,y,width,height}
* The con prefix was there to give it contrast from the view
properties, and is no longer useful.
The function container_set_geometry_from_floating_view has also been
renamed to container_set_geometry_from_content.
window_properties is documented to contain a subset of the X11 properties
of a window (its title, class, instance, role, and transient ID). This
commit adds the missing json object from the get_tree output for
xwayland windows only.
This is a follow-up of #2911.
Signed-off-by: Franklin "Snaipe" Mathieu <me@snai.pe>
QT unmaps the view before destroying the popup. We destroyed the popup
in response to the view unmapping, but then we'd attempt to destroy it a
second time which caused a crash.
The patch removes the listener.
I tested it with GTK as well, and can confirm the popup is still being
destroyed.
For mouse_warping cursor to correctly work on newly spawned containers,
the workspace needs to be arranged before the cursor is warped.
The shell functions each implement their own fullscreen and arrange checks,
move them into the view_map function and pass their states via boolean arguments.
Fixes#2819
This introduces a new view_impl function: is_transient_for. Similar to
container_has_ancestor but works using the surface parents rather than
the tree.
This patch modifies view_is_visible, container_at and so on to allow
transient views to function normally when they're in front of a
fullscreen view.
The previous behaviour was to damage the entire view, which would
recurse into each popup. This patch makes it damage only the popup's
surface, and respect the surface damage given by the client.
This adds listeners to the popup's map and unmap events rather than
doing the damage in the create and destroy functions. To get the popup's
position relative to the view, a new child_impl function get_root_coords
has been introduced, which traverses up the parents.
This does the following:
* Removes the xdg-decoration surface_commit listener. I was under the
impression the client could ignore the server's preference and set
whatever decoration they like using this protocol, but I don't think
that's right.
* Adds a listener for the xdg-decoration request_mode signal. The
protocol states that the server should respond to this with its
preference. We'll always respond with SSD here.
* Makes it so tiled views which use CSD will still have sway decorations
rendered. To do this, using_csd had to be added back to the view struct,
and the border is changed when floating or unfloating a view.
This replaces view.using_csd with a new border mode: B_CSD. This also
removes sway_xdg_shell{_v6}_view.deco_mode and
view->has_client_side_decorations as we can now get these from the
border.
You can use `border toggle` to cycle through the modes including CSD, or
use `border csd` to set it directly. The client must support the
xdg-decoration protocol, and the only client I know of that does is the
example in wlroots.
If the client switches from SSD to CSD without us expecting it (via the
server-decoration protocol), we stash the previous border type into
view.saved_border so we can restore it if the client returns to SSD. I
haven't found a way to test this though.
This commit changes the meaning of sway_container so that it only refers
to layout containers and view containers. Workspaces, outputs and the
root are no longer known as containers. Instead, root, outputs,
workspaces and containers are all a type of node, and containers come in
two types: layout containers and view containers.
In addition to the above, this implements type safe variables. This
means we use specific types such as sway_output and sway_workspace
instead of generic containers or nodes. However, it's worth noting that
in a few places places (eg. seat focus and transactions) referring to
them in a generic way is unavoidable which is why we still use nodes in
some places.
If you want a TL;DR, look at node.h, as well as the struct definitions
for root, output, workspace and container. Note that sway_output now
contains a workspaces list, and workspaces now contain a tiling and
floating list, and containers now contain a pointer back to the
workspace.
There are now functions for seat_get_focused_workspace and
seat_get_focused_container. The latter will return NULL if a workspace
itself is focused. Most other seat functions like seat_get_focus and
seat_set_focus now accept and return nodes.
In the config->handler_context struct, current_container has been
replaced with three pointers: node, container and workspace. node is the
same as what current_container was, while workspace is the workspace
that the node resides on and container is the actual container, which
may be NULL if a workspace itself is focused.
The global root_container variable has been replaced with one simply
called root, which is a pointer to the sway_root instance.
The way outputs are created, enabled, disabled and destroyed has
changed. Previously we'd wrap the sway_output in a container when it is
enabled, but as we don't have containers any more it needs a different
approach. The output_create and output_destroy functions previously
created/destroyed the container, but now they create/destroy the
sway_output. There is a new function output_disable to disable an output
without destroying it.
Containers have a new view property. If this is populated then the
container is a view container, otherwise it's a layout container. Like
before, this property is immutable for the life of the container.
Containers have both a `sway_container *parent` and
`sway_workspace *workspace`. As we use specific types now, parent cannot
point to a workspace so it'll be NULL for containers which are direct
children of the workspace. The workspace property is set for all
containers, except those which are hidden in the scratchpad as they have
no workspace.
In some cases we need to refer to workspaces in a container-like way.
For example, workspaces have layout and children, but when using
specific types this makes it difficult. Likewise, it's difficult for a
container to get its parent's layout when the parent could be another
container or a workspace. To make it easier, some helper functions have
been created: container_parent_layout and container_get_siblings.
container_remove_child has been renamed to container_detach and
container_replace_child has been renamed to container_replace.
`container_handle_fullscreen_reparent(con, old_parent)` has had the
old_parent removed. We now unfullscreen the workspace when detaching the
container, so this function is simplified and only needs one argument
now.
container_notify_subtree_changed has been renamed to
container_update_representation. This is more descriptive of its
purpose. I also wanted to be able to call it with whatever container was
changed rather than the container's parent, which makes bubbling up to
the workspace easier.
There are now state structs per node thing. ie. sway_output_state,
sway_workspace_state and sway_container_state.
The focus, move and layout commands have been completely refactored to
work with the specific types. I considered making these a separate PR,
but I'd be backporting my changes only to replace them again, and it's
easier just to test everything at once.
Simon Ser
Tuomas Yrjölä
Kirill Primak
Simon Zeni
Kenny Levinsen
Tudor Brindus
Tobias Langendorf
Ronan Pigott
Drew DeVault
Kalyan Sriram
Damien Tardy-Panis
Michael Weiser
Ivan Molodetskikh
Brian Ashworth
Ryan Dwyer
Franklin "Snaipe" Mathieu
Rouven Czerwinski
Ian Fan