Add a separate per-view shortcuts_inhibitor command that can be used
with criteria to override the per-seat defaults. This allows to e.g.
disable shortcuts inhibiting globally but enable it for specific,
known-good virtualization and remote desktop software or, alternatively,
to blacklist that one slightly broken piece of software that just
doesn't seem to get it right but insists on trying.
Add a flag to sway_view and handling logic in the input manager that
respects that flag if configured but falls back to per-seat config
otherwise. Add the actual command but with just enable and disable
subcommands since there's no value in duplicating the per-seat
activate/deactivate/toggle logic here. Split the inhibitor retrieval
helper in two so we can use the backend half in the command to retrieve
inhibitors for a specific surface and not just the currently focused
one. Extend the manual page with documentation of the command and
references to its per-seat sibling and usefulness with criteria.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Add a command to influence keyboard shortcuts inhibitors. In its current
form it can be used to activate, deactivate or toggle an existing
inhibitor on the surface currently receiving input. This can be used to
define an escape shortcut such as:
bindsym --inhibited $mod+Escape seat - shortcuts_inhibitor deactivate
It also allows the user to configure a per-seat default of whether
keyboard inhibitors are honoured by default (the default) or not. Using
the activate/toggle command they can then enable the lingering inhibitor
at a later time of their choosing.
As a side effect this allows to specifically address a named seat for
actions as well, whatever use-case that might serve.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
This enables/disables adaptive synchronization on the output.
For now, the default is disabled because it might cause flickering on
some hardware if clients don't submit frames at regular enough
intervals. In the future an "auto" option will only enable adaptive sync
if a fullscreen client opts-in via a Wayland protocol.
This is the third commit in a series of commits to refactor color
handling in sway. This removes add_color from commands.c. It was only
being used by bar_cmd_colors. This also changes the functions to use
parse_color which is used to validate rgb(a) colors throughout the code
base and is also what i3bar is using to parse the colors after they are
passed over ipc. After parsing the color and ensuring it is valid, the
rgba hex string is then generated using snprintf. This refactor also
ensures that all the colors for the command are valid before applying
any of them.
This adds seat configuration options which can be used to configure what
events affect the idle behavior of sway.
An example use-case is mobile devices: you would remove touch from the
list of idle_wake events. This allows the phone to stay on while you're
actively using it, but doesn't wake from idle on touch events while it's
sleeping in your pocket.
A wlr_keyboard_group allows for multiple keyboard devices to be
combined into one logical keyboard. This is useful for keyboards that
are split into multiple input devices despite appearing as one physical
keyboard in the user's mind.
This adds support for wlr_keyboard_groups to sway. There are two
keyboard groupings currently supported, which can be set on a per-seat
basis. The first keyboard grouping is none, which disables all grouping
and provides no functional change. The second is keymap, which groups
the keyboard devices in the seat by their keymap. With this grouping,
the effective layout and repeat info is also synced across keyboard
devices in the seat. Device specific bindings will still be executed as
normal, but everything else related to key and modifier events will be
handled by the keyboard group's keyboard.
Adds a new commend "xkb_file", which constructs the internal
xkb_keymap from a xkb file rather than an RMLVO configuration.
This allows greater flexibility when specifying xkb configurations.
An xkb file can be dumped with the xkbcomp program.
Without this change, the handlers listed in the config_handlers or
command_handlers arrays (depending on reading or active) in commands.c
would be valid subcommands. To make matters worse, they would also take
precedence over the defined subcommand handlers.
This corrects find_handler to only work on the handler array given
instead of implicitly trying others.
New 'seat <name> xcursor_theme <theme> [<size>]' command that
configures the default xcursor theme.
The default seat's xcursor theme is also propagated to XWayland, and
exported through the XCURSOR_THEME and XCURSOR_SIZE environment
variables. This is done every time the default seat's configuration is
changed.
This implements the following command to set/unset a user idle
inhibitor for a view:
`inhibit_idle focus|fullscreen|open|none|visible`
The modes are as follows:
- focus: inhibited when the view is focused by any seat
- fullscreen: inhibited when the view is fullscreen (or a descendant of
a fullscreen container) and is visible on any output
- open: inhibited until the view is closed or the inhibitor is unset or
changed
- none: unsets any user set idle inhibitors for the view
- visible: inhibited when the view is visible on any output
This should have no effect on idle inhibitors set by the applications
themselves and those should still work as intended.
Since this operates on the view in the handler context, it is possible
to set it on the currently focused view, on any existing view with
criteria, or for any future view with for_window.
Many laptop screens report unknown subpixel order. Allow users to manually set subpixel hinting to work around this.
Addresses https://github.com/swaywm/sway/issues/3163
This commit adds support for laptop lid and tablet
mode switches as provided by evdev/libinput and
handled by wlroots.
Adds a new bindswitch command with syntax:
bindswitch <switch>:<state> <command>
Where <switch> is one of:
tablet for WLR_SWITCH_TYPE_TABLET_MODE
lid for WLR_SWITCH_TYPE_LID
<state> is one of:
on for WLR_SWITCH_STATE_ON
off for WLR_SWITCH_STATE_OFF
toggle for WLR_SWITCH_STATE_TOGGLE
(Note that WLR_SWITCH_STATE_TOGGLE doesn't map to
libinput and will trigger at both on and off events)
This changes the `pointer_constraint` command to be a subcommand of seat
to allow for per-seat settings. The current implementation that is not a
seat subcommand will only operate on the current seat and will segfault
in the config due to `config->handler_context.seat` only being set at
runtime.
This also allows for the wildcard identifier to be used to alter the
pointer constraint settings on all seats and allows for the setting to
be merged with the rest of the seat config.
This modifies `bar_cmd_tray_bindsym` to use `get_mouse_bindsym` for
parsing mouse buttons. This also introduces `bar_cmd_tray_bindcode`,
which will use `get_mouse_bindcode` for parsing mouse buttons. Like with
sway bindings, the two commands are encapsulated in a single file to
maximize shared code.
This also modifies tray bindings to work off of events codes rather than
x11 buttons, which allows for any mouse buttons to be used.
For `get_bar_config`, `event_code` has been added to the `tray_bindings`
section and will include to event code for the button. If the event code
can be mapped to a x11 button, `input_code` will still be the x11 button
number. Otherwise, `input_code` will be `0`.
For example, create layout V[view view view] and resize the leftmost
view using mod+rightclick. Previously, the edge between view 2 and 3
would be adjusted as well. Now this edge will remain constant, which
matches the behaviour of i3.
To do this operation correctly, the resize tiling seatop now keeps track
of two containers, as the container that resizes horizontally will be a
different container to the one which resizes vertically (one will be an
ancestor). The tiling resize seatop now figures out these containers
during the start of the operation and keeps references to them in the
event. A new function container_find_resize_parent has been introduced
to do this. This function is also used by the resize command.
During cursor motion, the seatop logic is similar to before, but now has
to choose the correct container to resize.
In resize.c, container_resize_tiled and resize_tiled have been merged
into one. One of them originally did nothing except pass the values
through to the other.
container_resize_tiled now takes a simplified approach where it just
finds the immediate siblings on either side and resizes them without
worrying about the others. The parellel_coord and parallel_size
functions are no longer needed and have been removed.
Patch tested by compiling with `__attribute__ ((format (printf, 2, 3)))`
applied to `cmd_results_new`.
String usage constants have been converted from pointers to arrays when
encountered. General handler format strings were sometimes modified to
include the old input string, especially for unknown command errors.
This field is not in i3 and provides imprecise and redundant information.
(Specifically, when swaymsg is given a list of commands, the IPC return
array already indicates precisely which number command failed; knowing
the name of the command is not useful when multiple commands of the
same type are provided.)
Adds the bar subcommand `status_padding <padding>` which allows setting
the padding used for swaybar. If `status_padding` is set to `0`, blocks
will be able to take up the full height of the bar.
This modifies `bar_cmd_bindsym` to use `get_mouse_bindsym` for parsing
mouse buttons. This also introduces `cmd_bar_bindcode`, which will use
`get_mouse_bindcode` for parsing mouse buttons. Like sway bindings, the
two commands are encapsulated in a single file with shared code.
This also modifies swaybar to operate off of event codes rather than x11
button numbers, which allows for any mouse button to be used.
This introduces two new IPC properties:
- For `get_bar_config`, `event_code` has been added to the `bindings`
section and will include to event code for the button. If the event code
can be mapped to a x11 button, `input_code` will still be the x11 button
number. Otherwise, `input_code` will be `0`.
- Likewise for `click_events`, `event` has been added and will include
the event code for the button clicked. If the event code can be mapped
to a x11 button, `button` will still be the x11 button number.
Otherwise, `button` will be `0`.
Implements `tiling_drag_threshold <threshold>` to prevent accidental
dragging of tiling containers. If a container (and all of its
descendants) are unfocused and the tile bar is pressed, a threshold
will be used before actually starting the drag. Once the threshold has
been exceeded, the cursor will change to the grab icon and the operation
will switch from `OP_MOVE_TILING_THRESHOLD` to `OP_MOVE_TILING`.
Adds the bar subcommand `gaps <amount>|<horizontal> <vertical>|<top>
<right> <bottom> <left>` to set gaps for swaybar. Due to restrictions on
margins for a layer_surface, only the sides that are anchored to an edge
of the screen can have gaps. Since there is support for per-side outer
gaps for workspaces, those should be able to be used instead for the
last side.
This matches i3's behavior of returning a list of results that contain
the result of each command that was executed. Additionally, the
`parse_error` attribute has been added to the IPC JSON reply.
This adds support for `i3 4.16`'s ability to set the title alignment.
The command is `title_align left|center|right`.
When the title is on the right, marks are moved to the left. Otherwise,
they are on the right.
Konstantin Pospelov
Michael Weiser
Simon Ser
Brian Ashworth
Drew DeVault
Ronan Pigott
Ivan Molodetskikh
Tadeo Kondrak
Ed Younis
Sergei Dolgov
Daniel Eklöf
Moelf
Alex Maese
Connor E
Geoff Greer
Ryan Walklin
Ryan Dwyer
M Stoeckl
Ian Fan
Florent de Lamotte
Spencer Michaels