convince

Commit Graph

Author	SHA1	Message	Date
Ryan Dwyer	bfa20e65d8	Clean up focus follows mouse logic Firstly, this fixes a recent regression where having `focus_follows_mouse yes` and hovering an inactive tab caused it to gain focus. The code was missing a view_is_visible check. The code is handling the logic for both focus_follows_mouse yes and focus_follows_mouse always, where the latter will apply when nudging the mouse after a workspace switch. However, the view_is_visible check didn't apply when using focus_follows_mouse always, so hovering a tab with that configuration would cause is to focus. This was a bug. When adding the view_is_visible check, it now applies to both yes and always. Note that the comment about the split container was wrong. At this point the hovered node cannot be a split container because it passed the node_is_view check. The comment has been removed. Lastly, the else condition is completely removed. This didn't appear to have any practical use. Setting focus to the result of seat_get_focus_inactive is very likely going to be a no op. There is a slim chance that this will break something, and if so I'd like to find out what so it can be properly documented in the code.	6 years ago
Ryan Dwyer	7b9ae42331	Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.	6 years ago

Author

SHA1

Message

Date

Ryan Dwyer

bfa20e65d8

Clean up focus follows mouse logic

Firstly, this fixes a recent regression where having
`focus_follows_mouse yes` and hovering an inactive tab caused it to gain
focus. The code was missing a view_is_visible check.

The code is handling the logic for both focus_follows_mouse yes and
focus_follows_mouse always, where the latter will apply when nudging the
mouse after a workspace switch. However, the view_is_visible check
didn't apply when using focus_follows_mouse always, so hovering a tab
with that configuration would cause is to focus. This was a bug. When
adding the view_is_visible check, it now applies to both yes and always.

Note that the comment about the split container was wrong. At this point
the hovered node cannot be a split container because it passed the
node_is_view check. The comment has been removed.

Lastly, the else condition is completely removed. This didn't appear to
have any practical use. Setting focus to the result of
seat_get_focus_inactive is very likely going to be a no op. There is a
slim chance that this will break something, and if so I'd like to find
out what so it can be properly documented in the code.

Ryan Dwyer

7b9ae42331

Introduce default seatop

This introduces a `default` seat operation which is used when no mouse
buttons are being held. This means there is now always a seat operation
in progress. It allows us to separate `default` code from the standard
cursor management code.

The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and
`end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are
only used by the default seatop. `end` is called when a seatop is being
replaced by another one and allows the seatop to free any resources,
though no seatop currently needs to do this. `finish` is no longer
required, as each seatop can gracefully finish in their `button`
callback. And `abort` is not needed, as calling `end` would achieve the
same thing. The struct has also gained a bool named allow_set_cursor
which allows the client to set a new cursor during `default` and `down`
seatops.

Seatops would previously store which button they were started with and
stop when that button was released. This behaviour is changed so that it
only ends once all buttons are released. So you can start a drag with
$mod+left, then click and hold right, release left and it'll continue
dragging while the right button is held.

The motion callback now accepts dx and dy. Most seatops don't use this
as they store the cursor position when the seatop is started and compare
it with the current cursor position. This approach doesn't make sense
for the default seatop though, hence why dx and dy are needed.

The pressed_buttons array has been moved from the sway_cursor struct to
the default seatop's data. This is only used for the default seatop to
check bindings. The total pressed button count remains in the
sway_cursor struct though, because all the other seatops check it to
know if they should end.

The `down` seatop no longer has a `moved` property. This was used to
track if the cursor moved and to recheck focus_follows_mouse, but seems
to work without it.

The logic for focus_follows_mouse has been refactored. As part of this
I've removed the call to wlr_seat_keyboard_has_grab as we don't appear
to use keyboard grabs.

The functions for handling relative motion, absolute motion and tool
axis have been changed. Previously the handler functions were
handle_cursor_motion, handle_cursor_motion_absolute and
handle_tool_axis. The latter two both called cursor_motion_absolute.
Both handle_cursor_motion and cursor_motion_absolute did very similar
things. These are now simplified into three handlers and a single common
function called cursor_motion. All three handlers call cursor_motion. As
cursor_motion works with relative distances, the absolute and tool axis
handlers convert them to relative first.

2 Commits (812651d53e18602bb171f46ff3d896a60bff6cdb)