This allows for an optional validation stage when storing an input
config. Currently, only the xkb keymap is validated. If storing the
delta input config will result in any invalid xkb keymaps, the input
config will not be stored and error will be populated with the first
line of the xkbcommon log.
New 'seat <name> xcursor_theme <theme> [<size>]' command that
configures the default xcursor theme.
The default seat's xcursor theme is also propagated to XWayland, and
exported through the XCURSOR_THEME and XCURSOR_SIZE environment
variables. This is done every time the default seat's configuration is
changed.
This fixes a typo in `merge_id_on_name` for output configs that
resulted in incorrect id-on-name output configs being generated.
Instead of using the output that matched the name or identifier, the
first output in the list was being used instead. This could cause
merging across unrelated output configs and preventing output configs
from being applied correctly
When reloading, this destroys the old config's swaybg client before
spawning the new config's swaybg. This fixes a race condition where the
old config's swaybg client's destroy was being called after the new
config's swaybg client was being spawned. This was causing the
reference to the new swaybg client to be removed and never destroyed.
This also modifies handle_swaybg_client_destroy to grab the config
reference using wl_container_of on the listener since the swaybg client
may be the old config swaybg client and should be used instead of the
global config instance
Add support for configurations that apply to a type of inputs
(i.e. natural scrolling on all touchpads). A type config is
differentiated by a `type:` prefix followed by the type it
corresponds to.
When new devices appear, the device config is merged on top of its
type config (if it exists). New type configs are applied on top of
existing configs.
This makes it so there will only be one swaybg instance running
instead of one per output. swaybg's cli has been changed to a xrandr
like interface, where you select an output and then change properties
for that output and then select another output and repeat. This also
makes it so swaybg is only killed and respawned when a background
changes or when reloading.
Many laptop screens report unknown subpixel order. Allow users to manually set subpixel hinting to work around this.
Addresses https://github.com/swaywm/sway/issues/3163
In #3916, I overlooked that `get_output_config` does not handle
wildcards unless the config is reloading, which is a remnant of older
iterations of the output config handling that went unnoticed due to
`output_find_config` handling it. With the current version of the
output config handling, having `get_output_config` handle wildcard
configs is actually preferable. This fixes having only a wildcard
output config in the config file or when connecting/enabling a new
output with only a wildcard config existing.
This revamps the way that output configs are handled when referencing
an output by both identifier and name. If an output is always referred
to by name or by identifier, this should have no noticeable change. As
soon as there is a name output config and an identifier output config
that matches an output, an output config is generated that is named
`<identifier> on <name>` that is generated with the identifier output
config merged on top of the name output config and stored. When a
change to either is stored, the delta is merged on top of that
"id on name" output config, as well. If the "id on name" output config
exists, it has the highest precedence and will be used when applying
a config to the output.
This fixes the following case:
- `swaymsg output <name> bg /path/to/wallpaper1 fill`
- `swaymsg output <identifier> bg /path/to/wallpaper2 fill`
- `swaymsg output <name> dpms on`
Without this, the wallpaper is changed to `/path/to/wallpaper1`. With
this, the wallpaper remains `/path/to/wallpaper2`.
This removes `output_find_config`, which would take the first matching
output config it found. This is fine if only a name output config,
identifier output config, or even just wildcard exist, but if there is
a name output config and identifier output config, they are not merged.
Instead, this introduces find_output_config, which is just a wrapper
for `get_output_config`. This ensures that both the name and identifier
output configs are respected.
This fixes the following case:
- For simplicity in this example, remove all output configs from config
- Run `swaymsg output <name> bg #ff0000 solid_color`
- Run `swaymsg output <identifier> scale 2`
- Disconnect and reconnect output
Without this, the output will have the background, but not the scale.
With this, the output will have both the background and scale
This fixes the issue of the display freezing on reload with
wlroots#1545.
On master, all output configs are applied on reload. This may cause an
output to have its config applied up to three times, instead of just
once. The three cases are: output name, output identifier, and wildcard.
Not only is this inefficient, but it can cause swaybg to be spawned and
immediately killed.
However, swaybg requires two roundtrips of wl_display (to obtain needed
globals) before it enters its normal event loop. Modesetting will
roundtrip the wl_display. Without modesetting, waitpid for killing
swaybg could block infinitely due to swaybg being blocked by
wl_display_roundtrip.
This only configured an output once. It either uses the wildcard config
or creates an empty wildcard config and applies that. This also fixes a
bug where an output would not be reset when there is no output config to
apply to it.
On the DRM backend, if an output is dpms'd off and a different output is
hotplugged, the CRTC for the output is reclaimed. When modesetting an
output without a CRTC, a CRTC will not be given to an output that is not
desired to be enabled. This splits setting the dpms state in
apply_output_config. If the output should be dpms on, the it is enabled
before attempting to modeset. Otherwise, it is dpms'd off after setting
everything else.
This also adds DPMS_ON to the default output configs.
This fixes a few misc memory leaks reported by asan:
- Items of `config->config_chain` are now freed instead of just the list
itself
- `bar->swaybar_command` is now freed
- The result returned by a seat subcommand is now returned instead of
leaked
This changes the `pointer_constraint` command to be a subcommand of seat
to allow for per-seat settings. The current implementation that is not a
seat subcommand will only operate on the current seat and will segfault
in the config due to `config->handler_context.seat` only being set at
runtime.
This also allows for the wildcard identifier to be used to alter the
pointer constraint settings on all seats and allows for the setting to
be merged with the rest of the seat config.
Modifier handling functions were moved into sway/input/keyboard.c;
opposite_direction for enum wlr_direction into sway/tree/output.c;
and get_parent_pid into sway/tree/root.c .
This commit mostly duplicates the wlr_log functions, although
with a sway_* prefix. (This is very similar to PR #2009.)
However, the logging function no longer needs to be replaceable,
so sway_log_init's second argument is used to set the exit
callback for sway_abort.
wlr_log_init is still invoked in sway/main.c
This commit makes it easier to remove the wlroots dependency for
the helper programs swaymsg, swaybg, swaybar, and swaynag.
This happens if you plug in more outputs than supported by your GPU.
This patch makes it so outputs without CRTCs appear as disabled. As soon as
they get a CRTC (signalled via the mode event), we can enable them.
This modifies `bar_cmd_tray_bindsym` to use `get_mouse_bindsym` for
parsing mouse buttons. This also introduces `bar_cmd_tray_bindcode`,
which will use `get_mouse_bindcode` for parsing mouse buttons. Like with
sway bindings, the two commands are encapsulated in a single file to
maximize shared code.
This also modifies tray bindings to work off of events codes rather than
x11 buttons, which allows for any mouse buttons to be used.
For `get_bar_config`, `event_code` has been added to the `tray_bindings`
section and will include to event code for the button. If the event code
can be mapped to a x11 button, `input_code` will still be the x11 button
number. Otherwise, `input_code` will be `0`.
Adds the bar subcommand `status_padding <padding>` which allows setting
the padding used for swaybar. If `status_padding` is set to `0`, blocks
will be able to take up the full height of the bar.
This makes seat configs work like output and input configs do. This also
adds support for wildcard seat configs. A seat config is still created
in the main seat command handler, but instead of creating a new one in
the subcommands and destroying the main seat command's instance, the
seat subcommands modify the main one. The seat config is then stored,
where it is merged appropriately. The seat config returned from
`store_seat_config` is then applied. When attempting to apply a wildcard
seat config, a seat specific config is queried for and if found, that is
used. Otherwise, the wildcard config is applied directly.
Additionally, instead of adding input devices to the default seat
directly when there is no seat configs, a seat config for the default
seat is created with only fallback set to true, which is more explicit.
It also fixes an issue where running a seat command at runtime (with no
seat config in the sway config), would result in all input devices being
removed from the default seat and leaving sway in an unusable state.
Also, instead of checking for any seat config, the search is for a seat
config with a fallback option seat. This makes it so if there are only
seat configs with fallback set to -1, the default seat is still created
since there is no explicit notion on what to do regarding fallbacks.
However, if there is even a single fallback 0, then the default seat is
not used as a fallback. This will be needed for seat subcommands like
hide_cursor where the user may only want to set that property without
effecting anything else.
Moves the call to `terminate_swaybg` from inside `apply_output_config` to
`output_disable`. The former was only called when an output was being
disabled. The latter is called when an output is being disabled and when
an output becomes disconnected. Without this, disconnecting an enabled
output would result in a defunct swaybg process.
Default output configs were generated on reload to reset an output to
its default settings. The idea was that anything that was removed from
the config or changed at runtime and not in the config should be reset
on reload. Originally, they were created using the output name. Recently,
they were changed to use the output identifier. It turns out that there
are issues of shadowing with that solution as well. This should fix
those issues.
Instead of generating the default output configs on reload and storing
them in the output config list to merge on top of, they are now only
generated when retrieving the output config for an output during a
reload. This means that the default output configs are never stored
anywhere and just used as a base to merge unaltered user configs on top
of during a reload.
Starting with a blank output config, merges get applied in the following
order:
1. Default output config (only during a reload)
2. Wildcard config (only if neither output name or output identifier
exist)
3. Output name config
4. Output identifier config
When generating default output configs to reset the outputs to their
default settings on reload, the output name was being used.
Additionally when determining the output config to apply, if there was
an output config with the output name, that was being used without
checking for an identifier config. This caused sway to completely ignore
the users specified output config.
To fix this issue, the following changes have been made:
1. Default output configs as created for the identifier now instead of
name. This actually makes more sense anyway since you could hotplug
multiple different outputs to the same port.
2. In get_output_config, which is only used to determine which output
config to apply, output configs for both the name and identifier are
queried. If both are found, a new output config is generated with the
identifier config merged on top of the name config. If just one is found,
a copy of that config is returned. This change also requires that the
result from get_output_config be freed after use to prevent memory
leaks, which required some minor changes to logic in
apply_output_config_to_outputs.
Since wayland does not currently allow swaybar to create global
keybinds, this is handled within sway and sent to the bar using a custom
event, so as not to pollute existing events, called bar_state_update.
Sway sets a default status_command which runs date every second. This
patch removes this behaviour so the user can have a NULL status bar if
desired.
I had to swap swaybar's event_loop_poll and wl_display_flush so that it
would map the initial surface.
This changes it back so the path given to swaybg is enclosed in quotes.
Additionally, the only character that is escaped in the path stored is
double quotes now. This makes it so we don't need to keep an exhaustive
list of characters that need to be escaped.
The end user will still need to escape these characters in their config
or when passed to swaybg.
This commit changes the meaning of sway_container so that it only refers
to layout containers and view containers. Workspaces, outputs and the
root are no longer known as containers. Instead, root, outputs,
workspaces and containers are all a type of node, and containers come in
two types: layout containers and view containers.
In addition to the above, this implements type safe variables. This
means we use specific types such as sway_output and sway_workspace
instead of generic containers or nodes. However, it's worth noting that
in a few places places (eg. seat focus and transactions) referring to
them in a generic way is unavoidable which is why we still use nodes in
some places.
If you want a TL;DR, look at node.h, as well as the struct definitions
for root, output, workspace and container. Note that sway_output now
contains a workspaces list, and workspaces now contain a tiling and
floating list, and containers now contain a pointer back to the
workspace.
There are now functions for seat_get_focused_workspace and
seat_get_focused_container. The latter will return NULL if a workspace
itself is focused. Most other seat functions like seat_get_focus and
seat_set_focus now accept and return nodes.
In the config->handler_context struct, current_container has been
replaced with three pointers: node, container and workspace. node is the
same as what current_container was, while workspace is the workspace
that the node resides on and container is the actual container, which
may be NULL if a workspace itself is focused.
The global root_container variable has been replaced with one simply
called root, which is a pointer to the sway_root instance.
The way outputs are created, enabled, disabled and destroyed has
changed. Previously we'd wrap the sway_output in a container when it is
enabled, but as we don't have containers any more it needs a different
approach. The output_create and output_destroy functions previously
created/destroyed the container, but now they create/destroy the
sway_output. There is a new function output_disable to disable an output
without destroying it.
Containers have a new view property. If this is populated then the
container is a view container, otherwise it's a layout container. Like
before, this property is immutable for the life of the container.
Containers have both a `sway_container *parent` and
`sway_workspace *workspace`. As we use specific types now, parent cannot
point to a workspace so it'll be NULL for containers which are direct
children of the workspace. The workspace property is set for all
containers, except those which are hidden in the scratchpad as they have
no workspace.
In some cases we need to refer to workspaces in a container-like way.
For example, workspaces have layout and children, but when using
specific types this makes it difficult. Likewise, it's difficult for a
container to get its parent's layout when the parent could be another
container or a workspace. To make it easier, some helper functions have
been created: container_parent_layout and container_get_siblings.
container_remove_child has been renamed to container_detach and
container_replace_child has been renamed to container_replace.
`container_handle_fullscreen_reparent(con, old_parent)` has had the
old_parent removed. We now unfullscreen the workspace when detaching the
container, so this function is simplified and only needs one argument
now.
container_notify_subtree_changed has been renamed to
container_update_representation. This is more descriptive of its
purpose. I also wanted to be able to call it with whatever container was
changed rather than the container's parent, which makes bubbling up to
the workspace easier.
There are now state structs per node thing. ie. sway_output_state,
sway_workspace_state and sway_container_state.
The focus, move and layout commands have been completely refactored to
work with the specific types. I considered making these a separate PR,
but I'd be backporting my changes only to replace them again, and it's
easier just to test everything at once.
When we have type safety we'll need to have functions for
workspace_add_tiling and so on. This means the existing container
functions will be just for containers, so they are being moved to
container.c. At this point layout.c doesn't contain much else, so I've
relocated everything and removed the file.
* container_swap and its static functions have been moved to the swap
command and made static.
* container_recursive_resize has been moved to the resize command and
made static.
* The following have been moved to container.c:
* container_handle_fullscreen_reparent
* container_insert_child
* container_add_sibling
* container_add_child
* container_remove_child
* container_replace_child
* container_split
* enum movement_direction and sway_dir_to_wlr have been moved to util.c.
Side note: Several commands included layout.h which then included
root.h. With layout.h gone, root.h has to be included by those commands.
This list includes disabled outputs.
When sway_container is demoted, we'll need to store the root's children
(ie. enabled outputs) in the sway_root. It makes sense to put these in a
list called `outputs`, so I'm renaming the existing list in advance.
This changes the destroy functions to the following:
* output_begin_destroy
* output_destroy
* workspace_begin_destroy
* workspace_destroy
* container_begin_destroy
* container_destroy
* view_begin_destroy
* view_destroy
The terminology was `destroy` and `free`, and it has been changed to
`begin_destroy` and `destroy` respectively.
When the last output is disconnected, its workspaces will now be stashed
in the root. Upon connection of a new output they will be restored.
There is a new function `workspace_consider_destroy` which decides
whether the given workspace should be destroyed or not (ie. empty and
not visible).
Calling container_begin_destroy will no longer automatically reap the
parents. In some places we want to reap the parents and in some we
don't, so this is left to the caller.
container_reap_empty_recursive and container_reap_empty have been
combined into one function and it will recurse up the tree.
This allows for a color to be set when the wallpaper does not fill the
entire output. If specified, the fallback color is also used when the
image path is inaccessible.
wlroots uses wl_event_loop_add_signal to handle SIGUSR1 from Xwayland.
wl_event_loop_add_signal works by masking the signal and receiving it from a
signalfd. The signal mask is preserved across fork and exec, so subprocesses
spawned by Sway start with SIGUSR1 masked. Most subprocesses do not expect this
and never unmask the signal, resulting in missing functionality or unexpected
behavior for processes that use SIGUSR1 (such as i3status).
Fix this by unmasking all signals between fork and exec.
After setting the keymap, try to enable NumLock and disable CapsLock.
This only works if sway has the xkb master state and controls the keyboard.
Prepare configuration settings for later use as well.
This commit introduces a scroll_button option, which is intended to be
used with scroll_method. Now user can edit his sway config and add an
scroll_button option to device section.
If init fails halfway through it will call the destroy function,
which needs some coherent stuff filled.
Allocate with calloc and fill in what cannot fail first
Found through static analysis.
size_t/ssize_t are 8 bytes on 64bit systems, so use the proper size to
transmit that information.
This could lead to ridiculously large alloc as len is not initialized to zero
Found through static analysis
Swayidle handles idle events and allows
for dpms and lockscreen handling. It also
handles systemd sleep events, and can
raise a lockscreen on sleep
Fixes#541
Before freeing sway_output, NULL the wlr_output reference to it. Check for that
NULL in layer_shell handle_destroy. Don't damage null container in unmap.
Additionaly, terminate swaybg if its output is being disabled.
Sergei Dolgov
Brian Ashworth
Daniel Eklöf
Konstantin Pospelov
Benjamin Cheng
Jan Beich
Geoff Greer
emersion
Noam Preil
Rouven Czerwinski
Connor E
Drew DeVault
Ryan Dwyer
M Stoeckl
Ian Fan
Spencer Michaels
Arkadiusz Hiler
PP
Marien Zwart
ProgAndy
Robert Kubosz
Dominique Martinet
Mattias Eriksson
db
Tony Crisci