Instead of calling wlr_xdg_surface_for_each_popup and then
wlr_surface_for_each_surface, use the new for_each_popup_surface helper
introduced in [1] that does it in one go.
[1]: https://github.com/swaywm/wlroots/pull/2609
Instead of listening to both transform and scale events, we can listen
to the commit event and use the new wlr_output_event_commit struct to
decide what to do.
This de-duplicates some of the work we were doing twice when an output
was re-configured.
Depends on [1].
[1]: https://github.com/swaywm/wlroots/pull/2315
Previously, we called output_disable prior to wlr_output_commit. This
mutates Sway's output state before the output commit actually succeeds.
This results in Sway's state getting out-of-sync with wlroots'.
An alternative fix [1] was to revert the changes made by output_disable
in case of failure. This is a little complicated. Instead, this patch
makes it so Sway's internal state is never changed before a successful
wlr_output commit.
We had two output flags: enabled and configured. However enabled was set
prior to the output becoming enabled, and was used to prevent the output
event handlers (specifically, the mode handler) from calling
apply_output_config again (infinite loop).
Rename enabled to enabling and use it exclusively for this purpose.
Rename configure to enabled, because that's what it really means.
[1]: https://github.com/swaywm/sway/pull/5521
Closes: https://github.com/swaywm/sway/issues/5483
The output manager config is created when the output is created. It is
updated when the mode, transform, scale, or layout for the output
changes, as well as, when the output is destroyed.
Since the output->enabled property was not being set before calling
apply_output_config, the output event handlers were early returning and
never updating the output manager config when the output state was
committed.
This fixes the issue by setting output->enabled in apply_output_config
below the output disabling section. There are also a few other minor
changes that are required to function.
Additionally, this renames output_enable to output_configure to better
describe the recent changes.
The only output_enable caller is now apply_output_config. Stop calling
apply_output_config from output_enable to simplify the code and avoid
the back-and-forth between these two functions.
output_enable is now the symmetric of output_disable: it just marks the
output as enabled and performs bookkeeping (e.g. creating teh default
workspace). It is called from apply_output_config after the output
commit, so that it can read the current output state and act
accordingly.
This change also allows us to avoid an extraneous wlr_output_commit.
References: https://github.com/swaywm/sway/issues/4921
Repaint scheduling delays output render and frame done events from
output frame events, and block idle frame events from being scheduled in
between output frame done and output render in this period of time.
If a surface is committed after its frame done event, but before output
render, idle frame requests will be blocked, and the surface relies on
the upcoming render to schedule a frame.
If when the repaint timer expires, output render is deemed unnecessary,
no frame will be scheduled. This can lead to surfaces never having their
frame callbacks fire.
To fix this, we store that a surface has requested a frame in
surface_needs_frame. When the repaint expires, if no render is deemed
necessary, we check this flag and schedule an idle frame.
Fixes#4768
Calling wlr_output_manager_v1_set_configuration with an enabled output
and a NULL mode is incorrect if the output doesn't support modes.
When DPMS'ing an output, wlr_output_enable(output, false) is called.
This de-allocates the CRTC and sets wlr_output.current_mode to NULL.
Because we mark DPMS'ed outputs as enabled, we also need to provide a
correct output mode. Add a field to sway_output to hold the current
mode.
Closes: https://github.com/swaywm/wlroots/issues/1867
The documentation for wayland-server.h says:
> Use of this header file is discouraged. Prefer including
> wayland-server-core.h instead, which does not include the server protocol
> header and as such only defines the library PI, excluding the deprecated API
> below.
Replacing wayland-server.h with wayland-server-core.h allows us to drop the
WL_HIDE_DEPRECATED declaration.
This commit si similar to wlroots' ca45f4490ccc ("Remove all wayland-server.h
includes").
This makes it so there will only be one swaybg instance running
instead of one per output. swaybg's cli has been changed to a xrandr
like interface, where you select an output and then change properties
for that output and then select another output and repeat. This also
makes it so swaybg is only killed and respawned when a background
changes or when reloading.
Many laptop screens report unknown subpixel order. Allow users to manually set subpixel hinting to work around this.
Addresses https://github.com/swaywm/sway/issues/3163
This removes `output_find_config`, which would take the first matching
output config it found. This is fine if only a name output config,
identifier output config, or even just wildcard exist, but if there is
a name output config and identifier output config, they are not merged.
Instead, this introduces find_output_config, which is just a wrapper
for `get_output_config`. This ensures that both the name and identifier
output configs are respected.
This fixes the following case:
- For simplicity in this example, remove all output configs from config
- Run `swaymsg output <name> bg #ff0000 solid_color`
- Run `swaymsg output <identifier> scale 2`
- Disconnect and reconnect output
Without this, the output will have the background, but not the scale.
With this, the output will have both the background and scale
Modifier handling functions were moved into sway/input/keyboard.c;
opposite_direction for enum wlr_direction into sway/tree/output.c;
and get_parent_pid into sway/tree/root.c .
This happens if you plug in more outputs than supported by your GPU.
This patch makes it so outputs without CRTCs appear as disabled. As soon as
they get a CRTC (signalled via the mode event), we can enable them.
This splits each seat operation (drag/move tiling/floating etc) into a
separate file and introduces a struct sway_seatop_impl to abstract the
operation.
The move_tiling_threshold operation has been merged into move_tiling.
The main logic for each operation is untouched aside from variable
renames.
The following previously-static functions have been made public:
* node_at_coords
* container_raise_floating
* render_rect
* premultiply_alpha
* scale_box
This combines `output_by_name` and `output_by_identifier` into a single
function called `output_by_name_or_id`. This allows for output
identifiers to be used in all commands, simplifies the logic of the
callers, and is more efficient since worst case is a single pass through
the output list.
There's no point having both movement_direction and wlr_direction. This
replaces the former with the latter.
As movement_direction also contained MOVE_PARENT and MOVE_CHILD items,
these are now checked specifically in the focus command and handled in
separate functions, just like the other focus variants.
This commit changes the meaning of sway_container so that it only refers
to layout containers and view containers. Workspaces, outputs and the
root are no longer known as containers. Instead, root, outputs,
workspaces and containers are all a type of node, and containers come in
two types: layout containers and view containers.
In addition to the above, this implements type safe variables. This
means we use specific types such as sway_output and sway_workspace
instead of generic containers or nodes. However, it's worth noting that
in a few places places (eg. seat focus and transactions) referring to
them in a generic way is unavoidable which is why we still use nodes in
some places.
If you want a TL;DR, look at node.h, as well as the struct definitions
for root, output, workspace and container. Note that sway_output now
contains a workspaces list, and workspaces now contain a tiling and
floating list, and containers now contain a pointer back to the
workspace.
There are now functions for seat_get_focused_workspace and
seat_get_focused_container. The latter will return NULL if a workspace
itself is focused. Most other seat functions like seat_get_focus and
seat_set_focus now accept and return nodes.
In the config->handler_context struct, current_container has been
replaced with three pointers: node, container and workspace. node is the
same as what current_container was, while workspace is the workspace
that the node resides on and container is the actual container, which
may be NULL if a workspace itself is focused.
The global root_container variable has been replaced with one simply
called root, which is a pointer to the sway_root instance.
The way outputs are created, enabled, disabled and destroyed has
changed. Previously we'd wrap the sway_output in a container when it is
enabled, but as we don't have containers any more it needs a different
approach. The output_create and output_destroy functions previously
created/destroyed the container, but now they create/destroy the
sway_output. There is a new function output_disable to disable an output
without destroying it.
Containers have a new view property. If this is populated then the
container is a view container, otherwise it's a layout container. Like
before, this property is immutable for the life of the container.
Containers have both a `sway_container *parent` and
`sway_workspace *workspace`. As we use specific types now, parent cannot
point to a workspace so it'll be NULL for containers which are direct
children of the workspace. The workspace property is set for all
containers, except those which are hidden in the scratchpad as they have
no workspace.
In some cases we need to refer to workspaces in a container-like way.
For example, workspaces have layout and children, but when using
specific types this makes it difficult. Likewise, it's difficult for a
container to get its parent's layout when the parent could be another
container or a workspace. To make it easier, some helper functions have
been created: container_parent_layout and container_get_siblings.
container_remove_child has been renamed to container_detach and
container_replace_child has been renamed to container_replace.
`container_handle_fullscreen_reparent(con, old_parent)` has had the
old_parent removed. We now unfullscreen the workspace when detaching the
container, so this function is simplified and only needs one argument
now.
container_notify_subtree_changed has been renamed to
container_update_representation. This is more descriptive of its
purpose. I also wanted to be able to call it with whatever container was
changed rather than the container's parent, which makes bubbling up to
the workspace easier.
There are now state structs per node thing. ie. sway_output_state,
sway_workspace_state and sway_container_state.
The focus, move and layout commands have been completely refactored to
work with the specific types. I considered making these a separate PR,
but I'd be backporting my changes only to replace them again, and it's
easier just to test everything at once.
* container_move is only called from the move command
* container_move_to was called from both the move command and the sticky
command, but the sticky command can easily not call it
* container_get_in_direction is only called from the focus command
Moving these functions to their respective commands gives better
separation of code and removes bloat from layout.c. These functions will
need to be refactored to take advantage of type safety, so separating
them will make this easier to refactor.
The following static functions have also been moved:
* is_parellel
* invert_movement
* move_offs
* container_limit
* workspace_rejigger
* move_out_of_tabs_stacks
* get_swayc_in_output_direction
They were all used by the move functions, except for the last one which
is used by focus.
Other changes:
* index_child has been renamed to container_sibling_index, moved to
container.c and made public
* sway_output_from_wlr has been renamed to output_from_wlr_output, moved
to output.c and made public
* container_handle_fullscreen_reparent has been made public
* sway_dir_to_wlr has been made public
No changes have been made to any of the moved functions, other than
updating calls to functions that have been renamed.
This changes the destroy functions to the following:
* output_begin_destroy
* output_destroy
* workspace_begin_destroy
* workspace_destroy
* container_begin_destroy
* container_destroy
* view_begin_destroy
* view_destroy
The terminology was `destroy` and `free`, and it has been changed to
`begin_destroy` and `destroy` respectively.
When the last output is disconnected, its workspaces will now be stashed
in the root. Upon connection of a new output they will be restored.
There is a new function `workspace_consider_destroy` which decides
whether the given workspace should be destroyed or not (ie. empty and
not visible).
Calling container_begin_destroy will no longer automatically reap the
parents. In some places we want to reap the parents and in some we
don't, so this is left to the caller.
container_reap_empty_recursive and container_reap_empty have been
combined into one function and it will recurse up the tree.
This introduces the following `for_each` functions:
* root_for_each_workspace
* root_for_each_container
* output_for_each_workspace
* output_for_each_container
* workspace_for_each_container
And introduces the following `find` functions:
* root_find_output
* root_find_workspace
* root_find_container
* output_find_workspace
* output_find_container
* workspace_find_container
* container_find_child
And removes the following functions:
* container_descendants
* container_for_each_descendant
* container_find
This change is preparing the way for demoting sway_container. Eventually
these functions will accept and return sway_outputs, sway_workspaces and
sway_containers (meaning a C_CONTAINER or C_VIEW).
This change also makes it easy to handle abnormalities like the
workspace floating list, root's scratchpad list and (once implemented)
root's saved workspaces list for when there's no connected outputs.
This commit renames container_sort_workspaces to output_sort_workspaces
and moves it to output.c.
This also renames container_wrap_children to workspace_wrap_children and
moves it to workspace.c. This function is only called with workspaces.
Fixes the render and container_at order for popups.
Fixes#2210
For rendering:
* render_view_surfaces has been renamed to render_view_toplevels
* render_view_toplevels now uses output_surface_for_each_surface (which
is now public), as that function uses wlr_surface_for_each_surface which
doesn't descend into popups
* Views now have a for_each_popup iterator, which is used by the
renderer to render the focused view's popups
* When rendering a popup, toplevels (xdg subsurfaces) of that popup are
also rendered
For sending frame done, the logic has been updated to match the
rendering logic:
* send_frame_done_container no longer descends into popups
* for_each_popup is used to send frame done to the focused view's popups
and their child toplevels
For container_at:
* floating_container_at is now static, which means it had to be moved
higher in the file.
* container_at now considers popups for the focused view before checking
containers.
* tiling_container_at has been introduced, so that it doesn't call
container_at recursively (it would check popups recursively if it did)
The rendering code doesn't use the exclusive input surface at all
anymore to decide to skip rendering of shell surfaces. This fixes
a weird situation in which a client requests exclusive input but
isn't an overlay layer surface.
The renderer also renders all overlay surfaces in this situation,
not just one. This simplifies the code and fixes rendering when
there are more than one overlay surfaces (e.g. for a virtual
keyboard to type the lockscreen password).
Simon Ser
David96
Brian Ashworth
Kenny Levinsen
Ronan Pigott
Ivan Molodetskikh
Josef Gajdusek
Moelf
Geoff Greer
M Stoeckl
Ryan Dwyer
Robinhuett
Drew DeVault