diff --git a/CONTRIBUTING.md b/CONTRIBUTING.md index f450563a..a5a5111f 100644 --- a/CONTRIBUTING.md +++ b/CONTRIBUTING.md @@ -1,30 +1,12 @@ # Contributing to sway Contributing just involves sending a pull request. You will probably be more -successful with your contribution if you visit the [IRC -channel](http://webchat.freenode.net/?channels=sway-devel&uio=d4) upfront and discuss -your plans. +successful with your contribution if you visit +[#sway-devel](https://webchat.freenode.net/?channels=sway-devel) on +irc.freenode.net upfront and discuss your plans. -## Release Cycle - -The master branch of sway is always working towards becoming the next release. -That release will go through each of these three stages: - -**In development**: during this time the release lives in the master branch and -is considered unstable. All pull requests merged during this time will land in -the release. Only developers are encouraged to run this version. - -**Release candidate**: at some point (usually when development is fairly quiet), -SirCmpwn will announce an upcoming release candidate, often 2 weeks in -advance. When the two weeks are up, a branch is cut (i.e. 0.8-rc1) and from -that point only bugfixes land in this branch. Each week, if bugfixes landed -during the week, a new RC is cut. During the RC phase, more adventurous users -are encouraged to upgrade and start looking for and reporting bugs (especially -in new features). - -**Stable release**: when no substantial changes are merged into an RC for one -week, it's released as a new stable version of sway. At this point, all users -are encouraged to upgrade. +Note: rules are made to be broken. Adjust or ignore any/all of these as you see +fit, but be prepared to justify it to your peers. ## Pull Requests @@ -33,34 +15,44 @@ don't, however, allow me to make a suggestion: feature branches pulled from upstream. Try this: 1. Fork sway -2. Clone your fork -3. git remote add upstream git://github.com/swaywm/sway.git +2. `git clone https://github.com/username/sway && cd sway` +3. `git remote add upstream https://github.com/swaywm/sway` You only need to do this once. You're never going to use your fork's master branch. Instead, when you start working on a feature, do this: -1. git fetch upstream -2. git checkout -b add-so-and-so-feature upstream/master -3. work -4. git push -u origin add-so-and-so-feature -5. Make pull request from your feature branch +1. `git fetch upstream` +2. `git checkout -b add-so-and-so-feature upstream/master` +3. Add and commit your changes +4. `git push -u origin add-so-and-so-feature` +5. Make a pull request from your feature branch + +When you submit your pull request, your commit log should do most of the talking +when it comes to describing your changes and their motivation. In addition to +this, your pull request's comments will ideally include a test plan that the +reviewers can use to (1) demonstrate the problem on master, if applicable and +(2) verify that the problem no longer exists with your changes applied (or that +your new features work correctly). Document all of the edge cases you're aware +of so we can adequately test them - then verify the test plan yourself before +submitting. ## Commit Messages Please strive to write good commit messages. Here's some guidelines to follow: The first line should be limited to 50 characters and should be a sentence that -completes the thought [When applied, this commit will...] "Implement cmd_move" -or "Fix #742" or "Improve performance of arrange_windows on ARM" or similar. +completes the thought [When applied, this commit will...] *"Implement +cmd_move"* or *"Fix #742"* or *"Improve performance of arrange_windows on ARM"* +or similar. -The subsequent lines should be seperated from the subject line by a single +The subsequent lines should be separated from the subject line by a single blank line, and include optional details. In this you can give justification for the change, [reference Github issues](https://help.github.com/articles/closing-issues-via-commit-messages/), or explain some of the subtler details of your patch. This is important because when someone finds a line of code they don't understand later, they can use the `git blame` command to find out what the author was thinking when they wrote -it. It's also easier to review your pull requests if they're seperated into +it. It's also easier to review your pull requests if they're separated into logical commits that have good commit messages and justify themselves in the extended commit description. @@ -68,157 +60,178 @@ As a good rule of thumb, anything you might put into the pull request description on Github is probably fair game for going into the extended commit message as well. -## Coding Style - -Sway is written in C. The style guidelines is [kernel -style](https://www.kernel.org/doc/Documentation/process/coding-style.rst), but all braces go -on the same line (*"but K&R says so!" is a silly way of justifying something*). -Some points to note: - -* Do not use typedefs unless you have a good reason -* Do not use macros unless you have a *really* good reason -* Align `case` with `switch` -* Tabs, not spaces -* `char *pointer` - note position of `*` -* Use logging with reckless abandon -* Always include braces for if/for/while/etc, even for one-liners - -An example of well formatted code: - -```C -#include -#include -#include "log.h" -#include "example.h" - -struct foobar { - char *foo; - int bar; - long baz; -}; // Do not typedef without a good reason - -int main(int argc, const char **argv) { - if (argc != 4) { - sway_abort("Do not run this program manually. See man 5 sway and look for output options."); +See [here](https://chris.beams.io/posts/git-commit/) for more details. + +## Code Review + +When your changes are submitted for review, one or more core committers will +look over them. Smaller changes might be merged with little fanfare, but larger +changes will typically see review from several people. Be prepared to receive +some feedback - you may be asked to make changes to your work. Our code review +process is: + +1. **Triage** the pull request. Do the commit messages make sense? Is a test + plan necessary and/or present? Add anyone as reviewers that you think should + be there (using the relevant GitHub feature, if you have the permissions, or + with an @mention if necessary). +2. **Review** the code. Look for code style violations, naming convention + violations, buffer overflows, memory leaks, logic errors, non-portable code + (including GNU-isms), etc. For significant changes to the public API, loop in + a couple more people for discussion. +3. **Execute** the test plan, if present. +4. **Merge** the pull request when all reviewers approve. +5. **File** follow-up tickets if appropriate. + +## Style Reference + +Sway is written in C with a style similar to the [kernel +style](https://www.kernel.org/doc/Documentation/process/coding-style.rst), but +with a few notable differences. + +Try to keep your code conforming to C11 and POSIX as much as possible, and do +not use GNU extensions. + +### Brackets + +Brackets always go on the same line, including in functions. +Always include brackets for if/while/for, even if it's a single statement. +```c +void function(void) { + if (condition1) { + do_thing1(); } - if (!registry->desktop_shell) { - sway_abort("swaybg requires the compositor to support the desktop-shell extension."); + if (condition2) { + do_thing2(); + } else { + do_thing3(); } +} +``` + +### Indentation + +Indentations are a single tab. + +For long lines that need to be broken, the continuation line should be indented +with an additional tab. + +If the line being broken is opening a new block (functions, if, while, etc.), +the continuation line should be indented with two tabs, so they can't be +misread as being part of the block. + +```c +really_long_function(argument1, argument2, ..., + argument3, argument4); + +if (condition1 && condition2 && ... + condition3 && condition4) { + do_thing(); +} +``` + +Try to break the line in the place which you think is the most appropriate to +balance the lines. + +### Line Length + +Try to keep your lines under 80 columns, but you can go up to 100 if it +improves readability. Don't break lines indiscriminately, try to find nice +breaking points so your code is easy to read. + +### Names + +Global function and type names should be prefixed with `sway_submodule_` (e.g. +`struct sway_output`, `sway_output_destroy`). For static functions and +types local to a file, the names chosen aren't as important. Static functions +shouldn't have a `sway_` prefix. + +For include guards, use the header's filename relative to include. Uppercase +all of the characters, and replace any invalid characters with an underscore. - int desired_output = atoi(argv[1]); - sway_log(WLR_INFO, "Using output %d of %d", desired_output, registry->outputs->length); - int i; - struct output_state *output = registry->outputs->items[desired_output]; - struct window *window = window_setup(registry, 100, 100, false); - if (!window) { - sway_abort("Failed to create surfaces."); +### Construction/Destruction Functions + +For functions that are responsible for constructing and destructing an object, +they should be written as a pair of one of two forms: + +* `init`/`finish`: These initialize/deinitialize a type, but are **NOT** + responsible for allocating it. They should accept a pointer to some + pre-allocated memory (e.g. a member of a struct). +* `create`/`destroy`: These also initialize/deinitialize, but will return a + pointer to a `malloc`ed chunk of memory, and will `free` it in `destroy`. + +A destruction function should always be able to accept a NULL pointer or a +zeroed value and exit cleanly; this simplifies error handling a lot. + +### Error Codes + +For functions not returning a value, they should return a (stdbool.h) bool to +indicated if they succeeded or not. + +### Macros + +Keep the use of macros to a minimum, especially if a function can do the job. If +you do need to use them, try to keep them close to where they're being used and +`#undef` them after. + +### Example + +```c +struct wlr_backend *wlr_backend_autocreate(struct wl_display *display) { + struct wlr_backend *backend; + if (getenv("WAYLAND_DISPLAY") || getenv("_WAYLAND_DISPLAY")) { + backend = attempt_wl_backend(display); + if (backend) { + return backend; + } } - window->width = output->width; - window->height = output->height; - desktop_shell_set_background(registry->desktop_shell, output->output, window->surface); - list_add(surfaces, window); - - cairo_surface_t *image = cairo_image_surface_create_from_png(argv[2]); - double width = cairo_image_surface_get_width(image); - double height = cairo_image_surface_get_height(image); - - const char *scaling_mode_str = argv[3]; - enum scaling_mode scaling_mode; - if (strcmp(scaling_mode_str, "stretch") == 0) { - scaling_mode = SCALING_MODE_STRETCH; - } else if (strcmp(scaling_mode_str, "fill") == 0) { - scaling_mode = SCALING_MODE_FILL; - } else if (strcmp(scaling_mode_str, "fit") == 0) { - scaling_mode = SCALING_MODE_FIT; - } else if (strcmp(scaling_mode_str, "center") == 0) { - scaling_mode = SCALING_MODE_CENTER; - } else if (strcmp(scaling_mode_str, "tile") == 0) { - scaling_mode = SCALING_MODE_TILE; - } else { - sway_abort("Unsupported scaling mode: %s", scaling_mode_str); + + const char *x11_display = getenv("DISPLAY"); + if (x11_display) { + return wlr_x11_backend_create(display, x11_display); } - for (i = 0; i < surfaces->length; ++i) { - struct window *window = surfaces->items[i]; - if (window_prerender(window) && window->cairo) { - switch (scaling_mode) { - case SCALING_MODE_STRETCH: - cairo_scale(window->cairo, - (double) window->width / width, - (double) window->height / height); - cairo_set_source_surface(window->cairo, image, 0, 0); - break; - case SCALING_MODE_FILL: - { - double window_ratio = (double) window->width / window->height; - double bg_ratio = width / height; - - if (window_ratio > bg_ratio) { - double scale = (double) window->width / width; - cairo_scale(window->cairo, scale, scale); - cairo_set_source_surface(window->cairo, image, - 0, - (double) window->height/2 / scale - height/2); - } else { - double scale = (double) window->height / height; - cairo_scale(window->cairo, scale, scale); - cairo_set_source_surface(window->cairo, image, - (double) window->width/2 / scale - width/2, - 0); - } - break; - } - case SCALING_MODE_FIT: - { - double window_ratio = (double) window->width / window->height; - double bg_ratio = width / height; - - if (window_ratio > bg_ratio) { - double scale = (double) window->height / height; - cairo_scale(window->cairo, scale, scale); - cairo_set_source_surface(window->cairo, image, - (double) window->width/2 / scale - width/2, - 0); - } else { - double scale = (double) window->width / width; - cairo_scale(window->cairo, scale, scale); - cairo_set_source_surface(window->cairo, image, - 0, - (double) window->height/2 / scale - height/2); - } - break; - } - case SCALING_MODE_CENTER: - cairo_set_source_surface(window->cairo, image, - (double) window->width/2 - width/2, - (double) window->height/2 - height/2); - break; - case SCALING_MODE_TILE: - { - cairo_pattern_t *pattern = cairo_pattern_create_for_surface(image); - cairo_pattern_set_extend(pattern, CAIRO_EXTEND_REPEAT); - cairo_set_source(window->cairo, pattern); - break; - } - default: - sway_abort("Scaling mode '%s' not implemented yet!", scaling_mode_str); - } - - cairo_paint(window->cairo); - - window_render(window); - } + // Attempt DRM+libinput + + struct wlr_session *session = wlr_session_create(display); + if (!session) { + wlr_log(WLR_ERROR, "Failed to start a DRM session"); + return NULL; + } + + int gpu = wlr_session_find_gpu(session); + if (gpu == -1) { + wlr_log(WLR_ERROR, "Failed to open DRM device"); + goto error_session; } - while (wl_display_dispatch(registry->display) != -1); + backend = wlr_multi_backend_create(session); + if (!backend) { + goto error_gpu; + } - for (i = 0; i < surfaces->length; ++i) { - struct window *window = surfaces->items[i]; - window_teardown(window); + struct wlr_backend *libinput = wlr_libinput_backend_create(display, session); + if (!libinput) { + goto error_multi; } - list_free(surfaces); - registry_teardown(registry); - return 0; + + struct wlr_backend *drm = wlr_drm_backend_create(display, session, gpu); + if (!drm) { + goto error_libinput; + } + + wlr_multi_backend_add(backend, libinput); + wlr_multi_backend_add(backend, drm); + return backend; + +error_libinput: + wlr_backend_destroy(libinput); +error_multi: + wlr_backend_destroy(backend); +error_gpu: + wlr_session_close_file(session, gpu); +error_session: + wlr_session_destroy(session); + return NULL; } ```